B1504Instructions

Please keep this instruction sheet for future reference, as it contains important information.

Requires three "AA" (LR6) alkaline batteries (not included).

Adult assembly is required.

Tool required for assembly: Short shaft Phillips screwdriver (not included).

Smart Shopper™ Marketplace

www.fisher-price.com

Parts

Counter Top

Leg (Labeled with Star)

Leg (Labeled with Triangle)

Cash Register Base

Cash Register

Canopy

Canopy Support (Front and Back)

2 Shelves

2 Bins

Parts Not Shown:2 Label SheetsBunch of BananasBunch of CarrotsLoaf of BreadMilk CartonHot Dog PackageSoup CanChicken LegPieEgg CartonJelly Jar5 Coins4 Play Money BillsCredit Card

2

#8 x 1/2" Screw - 6 #8 x 3/4" Screw - 10

Scale

Basket

Note: Tighten and loosen all screws with a short shaft Phillips screwdriver. Do not over-tighten screws.

Both Shown Actual Size

Battery Installation

SHOWN ACTUAL SIZE

1.5V x 3 "AA" (LR6)

Hint: We recommend using alkaline batteries for longerbattery life.• Locate the battery compartment on the back of the

cash register.• Loosen the screw in the battery compartment door.• Insert three, new "AA" (LR6) alkaline batteries.• Replace the battery compartment door and tighten

the screw. Hint: To replace batteries, you will need to remove the cashregister from the cash register base. See hint on page 6.• When sounds or lights from this toy become faint or stop,

it’s time for an adult to change the batteries!Hint: If your child is not actively playing with this toy, it turns off automatically (sleep mode). To turn the toy back on, press any button on the cash register.

Battery Compartment Door

Battery Safety Information

Batteries may leak fluids that can cause a chemical burninjury or ruin your toy. To avoid battery leakage:• Do not mix old and new batteries or batteries of different

types: alkaline, standard (carbon-zinc) or rechargeable(nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely.

• Never short-circuit the battery terminals.• Use only batteries of the same or equivalent type,

as recommended.• Do not charge non-rechargeable batteries.• Remove rechargeable batteries from the toy

before charging.• If removable, rechargeable batteries are used,

they are only to be charged under adult supervision.

3

• Fit the canopy support (front) to the canopy support.

1

Canopy

Canopy Support (Front)

Assembly

2• Fit the canopy support (back) to the canopy support (front).• Insert two #8 x 1/2" screws into the canopy support (back)

and tighten.

3• Fit a shelf into either of the two legs. Make sure that the

tab on the shelf fits into the groove in the leg.• Insert two #8 x 3/4" screws into the outside of leg.

Tighten the screws.

Canopy Support (Back)

#8 x 1/2" Screw - 2

Shelf

Leg

4• Fit the other shelf to the leg. Make sure the tab on the

shelf fits into the groove in the leg.• Insert two #8 x 3/4" screws into the outside of the leg.

Tighten the screws.

Leg

#8 x 3/4" Screw - 2

Shelf

CAUTION

This product contains small parts in its unassembled state.

Adult assembly is required.

#8 x 3/4" Screw - 2

GrooveTab

4

5• Fit the other leg to the shelves. Make sure the tabs on

the shelves fit into the grooves in the leg.• Insert four #8 x 3/4" screws into the outside of the leg.

Tighten the screws.Hint: If you forgot to fit the tabs on the shelves into thegrooves on the legs, it is still possible to do this withoutremoving the legs. Simply press to “snap” the tabs into the grooves.

Leg

Shelves

Assembly

6• Look inside the assembly and note the star on one of

the legs. • Look underneath the counter top for the star on one end.• Positon the counter top so the star is over the star on the

leg. Fit the counter top to the assembly.• Insert two #8 x 3/4" screws into the counter top and tighten.

Counter Top

7• Turn the assembly upside down. Insert four #8 x 1/2"

screws into the tabs on the legs. Tighten the screws.Hint: You will need to hold the screwdriver at an angle.

8• "Snap" the cash register base into the counter top.

CashRegister

Base

#8 x 3/4" Screw - 2

#8 x 1/2" Screw - 4

#8 x 3/4" Screw - 2

5

Groove Tab

Star(Underside)

Star(Inside)

Assembly

9• "Snap" the canopy assembly into the counter top and

cash register base.

Canopy Assembly

10

Bin

• “Snap” the scale into the counter top.• Fit the two removable bins into any of the slots on either

the front or back shelf.• Hang the basket on the hook under either shelf.

Slots

Basket

11• Fit the cash register into the cash register base, as shown.

Be sure the hooked tab on the back of the cash registerfits into the slot in the cash register base.

• Tighten the two attached screws at the top of the cash register with a Phillips screwdriver to secure it. Do notover-tighten.

Hint: You will need to loosen the two screws to remove the cash register when replacing batteries.

CashRegister

Base

Slot

HookedTab

Scale

6

Hook

Label Decoration

• Make sure the areas where the labels will be applied areclean and dry.

• Apply the labels as shown in the illustrations.• For best results, avoid repositioning a label once it has

been applied.

1

2

4 567 8 9

10 (Front and Back)

11 12

3

Let’s Go Shopping!

"Weigh" your food on a moving scale.

Run items across the scanner to hear prices.

Touch a picture button to hear lots of fun facts and phrases.

Press number keys to hear numbers

identified.

Press to open the cash

register drawer.

Slide ROM cards (sold separately)into the register

slot to learn new facts about

Marketplaceitems.

Care

• Check the plastic parts regularly and if broken or cracked,dispose of them properly.

• Wipe this toy with a clean cloth dampened with a mildsoap and water solution. Do not immerse this toy.

• This toy has no consumer serviceable parts. Do not takethis toy apart.

(Apply these labels to front and back.)

7

FCC Note (United States Only)

Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interferenceto radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio otelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and

receiver.• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician

for help.Note: Changes or modifications not expressly approved bythe manufacturer responsible for compliance could void theuser's authority to operate the equipment.

Consumer Information

Questions? We’d like to hear from you!Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.Hearing-impaired consumers using TTY/TDD equipment,please call 1-800-382-7470.

Or, write to: Fisher-Price® Consumer Relations 636 Girard Avenue East Aurora, New York 14052 U.S.A.

For countries outside the United States:CANADAQuestions? 1-800-567-7724, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. GREAT BRITAINMattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.AUSTRALIAMattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer AdvisoryService 1300 135 312.NEW ZEALAND16-18 William Pickering Drive, Albany 1331, Auckland.ASIAMattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,Harbour City, Tsimshatsui, HK, China.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.© 2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

Printed in Mexico B1504pr-0920