SMART RFID - your best solution for touchless access control and time attendance systems
-
Upload
smart-technology-group -
Category
Technology
-
view
443 -
download
0
Transcript of SMART RFID - your best solution for touchless access control and time attendance systems
MADE BY SMART TECHNOLOGY GROUP
THE MOST EFFECTIVE TOOL
FOR CREATING TOUCHLESS ACCESS CONTROL SYSTEMS
AND TIME ATTENDANCE SYSTEMS
The only tool allowingfor creating UHF and LF systems
that simultaneously use technologies
RFID, Bluetooth and GSM
How does it work? Combination of Bluetooth and RFID provides you with unprecedented possibilities: - employees may open door with cards,
lanyards or smartphones, - your visitors or customers may use
identification cards,
- read distance is controllable and may be freely modified.
Areas of use
EMPLOYEES IDENTIFICATION
CONTROL OF PEOPLE AND GOODS FLOW ANTI-THEFT SECURITY EVACUATION
MANAGEMENET
One employee scans his card, but the whole group walks just behind him without scanning.
Open door (or lack of it) make identification of passing people impossible.
Challenges for Security
Challenges for Security
Employees have to stop to punch card – this results in long lines at entrances or exits.
Difficulties with identification of company goods (fixed assets, equipment) relocated or taken by employees.
Challenges for Security
No identification of employees working in zones or open spaces.
Challenges for Security
Challenges for SecurityTroubles with employees identification during evacuation. During threat, when access control is turned off, security does not know how many employees are in a building and where they are.
faces all these challenges
Solution
Perfect identification up to 300 people passing control checkpoint at the same moment.
Smart RFID gives unlimited possibilities for single/group identification.
Employees equipped with tags will be always correctly recognized.
SMART RFID efficiency?
Smart RFID answers all challenges
You can freely calibrate read distance. You decide about the distance your employees will be recognized.
Guaranteed conveniencesSmart RFID answers all challenges
Thanks to SMART RFID, employees don’t have to waste time to stop and punch card.
SMART RFID can identify up to 300 employees within 1 second.
We eliminate lines caused by card punching.
Employee does not have to initiate any activitiy to gain access / to be identified.
Card can be hiddedn in pocket, pendant in bag and lanyard hung on a neck and hidden under jacket – and in every time it will be correctly identified.
Smart RFID answers all challengesGuaranteed conveniences
Marking fixed goods with tags-stickers allows you to track their flow between rooms, zones, buildings.
At checkpoint SMART RFID allows for automatic identifcation of fixed goods as well as employee who carries them.
When there is no authorisation, SMART RFID turns on an alarm.
Anti-theft systems may be built with SMART RFID.
Authorisation to move fixed good by specific employee is always verified at every checkpoint.
Smart RFID answers all challengesGuaranteed conveniences
Employee does not have to do anything to be identified.
Employees supervision in zones, open spaces and production floors.
Thanks to its great and calibrated read distance, SMART RFID allows for precise identification employees workin in production floors and open spaces.
Smart RFID answers all challengesGuaranteed conveniences
SMART RFID will work perfectly during evacuation, when door will be automatically open.
SMART RFID allows for creating very precise systems of immediate location and headcount of all people in company.
Evacuation supervision systems
Smart RFID answers all challengesGuaranteed conveniences
RFID tags (as card, lanyard or pendant)
Smartphone (GSM) or smartphone with
application (BLE)
SMART RFID system for access control may consist of:
RFID + Bluetooth reader RFID antennas
How does it work?
The only RFID reader with 4 relay outputs(direct control over 4 doors)
Communication interfaces: Ethernet (UDP, TCP), RS-232, RS-485, Wiegand
May be powered with PoE
Up to 8 antennas may be connected(up to 4 doors may be controlled)
RFID UHF Master 01 is easy to install and integrate.
How does it work?
Antennas with various read distance.
Linear or circular polarization.
Antennas with various radiation characteristics
RFID UHF antennas
A 19, A24
70o | 70o
A 42
25o | 20o
A 45
40o | 40o
How does it work?
activate Master 01 reader that open door/gate.
Tag as card, lanyard or pendant (RFID)
smartphone (GSM)or smartphone with application
(Bluetooth)or
How does it work?
Two working modes
Smart RFID allows for creating touchless access control systemsin various modes:
autonomous mode – simple access control systems without computer nor control software
system mode – advanced systems of entry and exit control, in which high-level software verifies entry/exit qualifications and registers work of time.
Autonomous ModeSimplified method for managing door/gate.
No computer needed.
All you need is:
RFID UHF reader RFID UHF antennas RFID UHF tags
System scheme
Relay outputs must be connected directly to the drivers of lock.
And… ready!
Autonomous Mode
How does it work?
The range of tags EPC number with entry/exits qualifications are written in Master 01.
At the moment of authorised tag identification within antenna reach, Master 01 opens door.
Master 01 allows you to build access control systems in autonomous mode even up to
several thousand of users.
Autonomous Mode
System modeComputer and installed software with data base controls the door/gate lock.At the moment of tag/mobile application identification, information about person authorisation will be sent to Master 01 RFID UHF reader by software
Master 01 reader opens door/gate.
SMART RFID is easy to install and to integrate. Thanks to available SDK, your system may be integrated with any software for access control and time attendance system.
SMART RFID will flawlessly integrate with your system of contactless access control.
System mode
What SMART RFID can do?
Contact usPhD. Eng. Karolina Kozlowska (CEO)
PhD. Eng Monika Bandura (COO)