Smart Completion Islam Selim
-
Upload
leonora-ponce-rivero -
Category
Documents
-
view
120 -
download
7
Transcript of Smart Completion Islam Selim
The Smart Fields Technology
Prepared By:Islam Selim
Completion & Workover EngineerRashid Petroleum Company
Outlines
The Smart Fields The Smart completion definition Why we need smart wells The Smart completion main components
Down hole flow control valveReservoir monitoring
Smart Fields
The Smart Completion
What Is Smart Wells?
It is a well that has:
1. Control Down hole flow control
valves
2. Monitoring (PDG) Permanent down-
hole measurement gauges
Why Would You Want To Install Such A System?
The major value of the smart well solution is: The accelerated production You can increase total recovery The absence of a work over (reduce the operating
expenses) Increase reservoir knowledge Better manage uncertainties is reservoir analysis.
How Can We Control Down hole Flow?
BY: Down hole flow and pressure control can be achieved
through the use of interval control valves (ICVs)
ICV
ICV refers to Inflow Control Valve A valve system that regulates flow through it by
either hydraulic or electrical commands
Electro hydraulic Umbilical
ICV Vs. SSD
Current Application
Water or gas shut-off Commingled production Gas dump flooding
Water or gas shut-off
Commingled production
The use of ICVs to allow commingled production from zones with different pressures, through choking the inflow from the highest pressured zone with a continuously variable ICV, to avoid cross-flow to the lowered pressured zone
Commingled production
Commingled production
Gas dump flooding
Bottom Hole Pressure (BHP) BHPs may be either:
Static, in which pressures are recorded with the well shut-in
Flowing, In a flowing survey the well is opened up to produce for a period with the gauge at the bottom of the hole
Pressures are recorded during the flowing or drawdown period, and subsequently during a shut-in or buildup period
Recording BHP provides information about the reservoir pressure, permeability around the well, Skin, and about the well's productivity
Permanent Pressure Monitoring System
Occasionally permanent gauges may be installed at the bottom of a well, connected by an electrical cable to a surface readout
Allows real time monitoring of bottom hole pressure without the need for down hole power, electronics or moving parts
.
Real time Surface Readout Gauge Electronic downhole surface
readout gauge is designed with state of the art surface read-out technology.
The gauge sends pressure and temperature data from downhole to surface in the real time basis through one single conductor cable
Side Pocket Mandrel Gauge
Side Pocket Mandrel Gauge utilizes our robust electronic design with silicon-sapphire technology to measure pressure and temperature by working as a gas lift valve.
The gauge housings are designed according to conventional 1” and 1.5” gauge , therefore, they can be set and retrieved by using standard side pocket mandrel tools.
Side Pocket Mandrel Gauge
Downhole Flow Meter
Downhole Flow Meter Venturi Spinner Passive Acoustic Optical Fibre
Down hole flow meter
The down hole Flowmeter provides accurate, real-time downhole flow measurement of liquid and/or gas
Down-hole water-cut meters and densitometers It is designed for permanent downhole installation
and is deployed as part of the production tubing during the completion
Down hole flow meter
The downhole flowmeter’s benefits include: Zonal production allocation Early identification of production decline Direct determination of the productivity index
Conclusion
The Smart completion now in Mediterranean sea Down hole flow control (ICV) Real time reservoir monitoring (PDG)