Slitting Line
-
Upload
enverkara80 -
Category
Documents
-
view
223 -
download
0
Transcript of Slitting Line
-
8/2/2019 Slitting Line
1/3
Slitting LineThis slitting line is used for the slitting of metal coils into the desired width. It iscomposed of the following: entry coil car, uncoiler, slitter, scrap coiler, tension unit,recoiler, etc. Our slitting machine carries out slitting on cold or hot rolling carbon steel,tinplates, stainless steel, and other kinds of metal that have coated surfaces. It is auseful slitting machine, widely used during the processing of home appliances,automobiles, hardware, steel products and more.
-
8/2/2019 Slitting Line
2/3
Uncoiling Unit
1. Several coils can be pre-placed on the loading station to improve working
efficiency.2. This uncoiling unit of our slitting line adopts a hydraulic collapsible drum, which
does no harm to the inner layers of the material. It is capable of carrying outtension uncoiling or manual material feeding, which effectively prevents thematerial from deflecting and scraping.
3. Both single-head and double-head type uncoiling units are available.
Slitting Unit
1. The slitting head arbors are fixed in eccentric sleeves. The slitting angle remainsunchanged if the blade has just been polished
2. This slitting line has two slitter heads. While one is running on line, blade settingcan be done on the other, which can greatly reduce production down-time. As aresult, this slitting line carries out slitting and blade changing simultaneously. Thisgreatly increases the working efficiency.
3. Hydraulic locknuts could be used for higher blade positioning precision.
Tension Unit
1. Two pre-separation devices are fitted to this tension unit. The disengaging shaftcould be transversely removed for faster switching of separating plates.
2. It has a friction type tensioning unit. The adjustable tension could be offered byhydraulic power or pneumatic power.
3. Our slitting line could also be equipped with a roller type tightening machine,which is suitable for materials of coated surfaces because it does not harm the
coated surfaces.
-
8/2/2019 Slitting Line
3/3
Recoiling Unit
1. Our slitting line is fitted with a seamless hydraulic expansion coiler, which does notdamage the inner-layer of the material.2. The material clamping device has stress reducing characteristics. The roundness of
the winding drum remains unchanged for plates of different thickness.3. It carries out firm, dense and neat coiling.
Parameters of Slitting Line
Model/ Items Thickness(mm)Width(mm)
SlittingNumber
Slitting Speedm/min
Coil Weight(ton)
MSL-0.5x1000
0.15-0.5 300-1000 12 50-150 7
MSL-
0.5x13000.15-0.5 500-1300 24 50-150 7
MSL-2X650 0.3-2 200-650 10-30 50-150 7MSL-2X10000.3-2 300-1000 10-30 50-150 7/15
MSL-2x1300 0.3-2 500-1300 12-30 50-180 7/15
MSL-2x1600 0.3-2 500-1600 12-30 50-180 7/15MSL-3x1600 0.3-3 500-1600 8-30 50-180 15
MSL-3x1800 0.3-3 900-1800 8-30 50-180 20
MSL-4x1600 1-4 900-1600 6-30 50-120 20MSL-6x1600 1-6 900-1600 6-30 30-80 30
MSL-
10x20002-10 900-2000 5-30 30-50 30
MSL-
12x20003-12 900-2000 5-30 20-40 30
MSL-
16x20003-16 900-2000 5-30 20-40 40
Note:
All the specifications and components of our slitting machine could be customized upon request.