Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls? 20% of all...

5
Slips, Trips, and Falls RCS Tool Box Talks

Transcript of Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls? 20% of all...

Page 1: Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls?  20% of all accidental deaths are related to slips and falls.

Slips, Trips, and Falls

RCS Tool Box Talks

Page 2: Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls?  20% of all accidental deaths are related to slips and falls.

What’s the big deal about slips and falls?

20% of all accidental deaths are related to slips and falls.

A California Workers Comp study revealed that work surfaces are the most common causes for job related injuries.

Not only are slips and falls a work problem; they are the leading cause of accidental deaths in the home.

Page 3: Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls?  20% of all accidental deaths are related to slips and falls.

How to Prevent Slips/Trips/Falls

Preventing Slips and Falls

– Be prepared for weather related problems

Wet surfaces

Ice/Snow

Mud

Page 4: Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls?  20% of all accidental deaths are related to slips and falls.

Preventing Slips/Trips/Falls

Keep walkways clear of trip hazards.

Use handrails when provided.

Maintain 2 points of contact when walking on stairs.

Do not store materials on stairs.

Maintain good visibility.

Page 5: Slips, Trips, and Falls RCS Tool Box Talks. What’s the big deal about slips and falls?  20% of all accidental deaths are related to slips and falls.

Focus Points for Slip/Trip/Fall Injuries

The normal line of sight is 15 degrees below the horizontal.

The center of gravity for the human body is normally 3 inches above the mid-point of the person’s height.

Some common injury areas are:

– Stairs

– Scaffolds

– Ladders

– Roofs

– Tile and Concrete floors