SLINGS Fabricated

SLINGS

Northern Illinois Rigging Division5401 Mainsail Dr. Roscoe, IL 61073P: 815-877-0007 • F: 815-877-0064

[email protected] • [email protected]

Iowa Division (Davenport)919 E. 59th St. Davenport, IA 52807P: 563-823-1868 • F: 563-823-1870

[email protected]

Wisconsin Division312 Stonecrest Ct. Neenah, WI 54956P: 920-215-6233 • F: 920-215-6698

[email protected]

Blue Ridge Forge, Inc.316 West Cedar St. Chillicothe, IL 61523

P: 309-274-5377 • F: [email protected]

Central Illinois Rigging Division1480 S. Main St. Ste A Morton, IL 61550


Iowa Division (Des Moines)1621 N.E. 51st Ave Des Moines, IA 50313


Decatur Division2305 E. Logan St. Decatur, IL 62526P: 217-876-7918 • F: 217-876-7928

[email protected]

Nebraska Division4893-4895 F St. Omaha, NE 68117P: 402-734-0962 • F: 402-733-9413

[email protected]

Section Index Main Index Main Index Section Index

Catalog Vol: 18

Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

FabricatedEngineer Products

The Blue Ridge Forge Division of Rockford Rigging, Inc.is led by one of our industry experts,

with over 28 years of blacksmith experience.

All products are designed andproof tested to ANSI B30-2 and BTH-1.

Fabricated Engineer P

roducts

http://www.rockfordrigging.com


http://www.blueridgeforge.com

FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]

Section Index Main IndexCatalog Vol: 18

ww

w.rockfordrigging.com

Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

Fabricated Products Index

FabricatedP

roducts Index

Fabricated Products Standards .................................................. H.3Fabricated Lifters & Specials ................................................H.4-H.5J-hooks ...................................................................................... H.6Special J-Hooks & S-Hooks .................................................H.7-H.8Heavy-Duty Material Stands & Tire Hooks ................................. H.9Fork Lift Attachments .......................................................H.10-H.12Fiberglass Batter Lifting Beams ................................................ H.13Spreader Beam End Fitting Attachments .................................. H.14Manual & Radio Controlled Rig-Release® ................................ H.15Beam Grabs & Girder Clamps .................................................. H.16Barrier Grabs ............................................................................ H.17Clamp-On Bucket Forks & Die Lifting Tongs ............................ H.18Adjustable Pallet Lifter ............................................................. H.19Adjustable Spreader Beams ..................................................... H.20Low Headroom Spreader Lifting Beams ...........................H.21-H.22Dura-Lite™ Composite Lifting Beams ................................H.23-H.24Coil Hooks ................................................................................ H.25Sheet Lifters ............................................................................. H.26Posi-Turner® Lifters .........................................................H.27-H.28Vacuum Lifters ......................................................................... H.29Cranes, Base Tie Rod & Gantry Cranes .................................... H.30Light Duty Freestanding Workstation Crane Systems ......H.31-H.32



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]

Main Index Section Index

Catalog Vol: 18w

ww

.rockfordrigging.com

Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.3

J-Hooks Pry Heels TongsFork Lift Accessories Construction Lifters Fabricated Lifting

Posi-Turner® Vacuum Lifters Specialty Fabricated

B30.20, B30.9 & Other StandardsVarious industry standards govern the design and use of fabricated equipment.

Rockford Rigging lifting equipment is designed in accordance with these standards.

Product Line Industry Standard

Hooks ASME B30.9, B30.20, BTH-1

Specialty ASME B30.9, B30.20, BTH-1

Strong-Bac® ASME B30.9, B30.20, BTH-1

Mill Duty ASME B30.20, BTH-1

Posi-Turner® ASME B30.9, B30.20, BTH-1

Univac® ASME B30.20, BTH-1

Rig-Release® ASME B30.9, B30.20, BTH-1

Rig-Master® ASME B30.9, B30.20, BTH-1

Lif-Truc™ ASME B56.1, B56.11.4, OSHA 1910.178(4)

Caldwell® ASME B30.9, OSHA 1910.184

Key ASME StandardsASME BTH-1 designates design criteria for below-the-hook lifting devices (ASME B30.20) and serves as a guide to designers, manufacturers, purchasers, and users of these types of lifters.

All below-the-hook lifting devices shall be designed for specific rated loads and load stresses as they affect the components of the lifting device.

A design category and service class shall be designated and marked on the lifters and all quotations, drawings, and other documents relating to the lifter.

Design Category B should be designated when the conditions of the lift are not always defined or predictable, or when load conditions could be severe.

Design factors for Design Category B lifting devices shall not be less than 3.00 for limit states of yielding or buckling.

Service Class is the specified fatigue life of the lifter. • Service Class 0 is 0 – 20,000 load cycles • Service Class 1 is 20,001 – 100,000 load cycles • Service Class 2 is 100,001 – 500,000 load cycles • Service Class 3 is 500,001 – 2,000,000 load cycles • Service Class 4 is over 2,000,000 load cycles

Cyclesper Day

Desired Life (Years) 1 5 10 20 30

5 0 0 0 1 110 0 0 1 1 225 0 1 1 2 250 0 1 2 2 3

100 1 2 2 3 3200 1 2 3 3 4300 2 3 3 4 4750 2 3 4 4 4

1000 2 3 4 4 4

Should you need additional clarification as to how the ASME standards affect your specific application and your lifting device, contact

our office or visit the ASME website at www.ASME.org foradditional information or to purchase a copy of the standard.

Fabr

icat

edP

rodu

cts

Sta

ndar

ds




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.4

FabricatedLifters &

Specials

Specialty Applications - Blue Ridge Forge

Pry Heel, 200 lbs.

Roll-Over, 1000 lbs.

3-Leg Tong, 100 lbs.

Roll-Over, 1,000 lbs.


Pry Heel, 25 lbs.


Product Features:• All welded construction.• All welds to be continuous unless otherwise noted.• Blue Ridge Forge, Inc. Product Examples:



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.5

Fabr

icat

edLi

fter

s &

Spe

cial

s

Specialty Applications - Blue Ridge Forge

Scissor Lift, 200 lbs.

3-Leg Scissor Lift, 400 lbs.

Stirrup Hook, 100 lbs.

Stirrup Hook, 2,000 lbs.

Scissor Lift, 32 lbs.

Product Features:

• All welded construction.• All welds to be continuous unless

otherwise noted.• Blue Ridge Forge, Inc. Product Examples:




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.6

J-hooks

Foundry Hooks, J-Hooks, S-Hooks & Plate Hooks - Blue Ridge Forge

Foundry Hooks

Dia. D(in.)

Capacity(lbs.)

ChainSize

Dimensions (in.)

A B C

0.50 500 0.28 6 2.50 0.750.625 800 0.28 8.50 3.50 1.500.75 1500 0.28 8.50 3.50 1.500.875 2000 0.38 8.50 4.00 1.501.00 2500 0.38 8.50 4.50 1.751.125 3500 0.38 8.50 4.50 2.001.25 4500 0.50 8.50 4.50 2.001.50 6000 0.50 8.50 5.00 1.50

J-Hooks Hooks

Dia. D(in.)

Dimensions (in.) Ref#

Capacity(lbs.)

ChainSizeA B

0.38 6.00 1.50 BRF10 350 0.280.50 8.50 1.50 BRF20 900 0.380.50 8.50 2.50 BRF30 500 0.380.50 6.00 3.00 BRF40 450 0.380.63 8.50 3.50 BRF50 750 0.380.63 6.00 3.00 BRF60 800 0.380.75 8.50 3.50 BRF70 900 0.380.75 6.00 3.00 BRF80 1500 0.381.00 8.50 3.50 BRF90 2500 0.501.00 6.00 3.50 BRF100 2500 0.50

Alloy S-Hooks Hooks

MaterialDiameter

CatalogNo.

Dimensions (in.) Approx.Weight(lbs.)

WorkingLoad

Limit*A B C

.312 BRS0312 2.75 .75 .38 .08 325

.375 BRS0375 4.13 1.13 .56 .40 425

.500 BRS0500 5.50 1.50 .75 .60 755

.625 BRS0625 7.00 1.88 .94 1.3 1225

.750 BRS0750 8.25 2.25 1.13 2.3 1750

.875 BRS0875 9.50 2.63 1.31 3.0 24001.000 BRS1000 11.00 3.00 1.50 4.5 30001.250 BRS1250 13.75 3.75 1.88 8.5 49001.500 BRS1500 16.50 4.50 2.25 15.0 70001.750 BRS1750 19.25 5.25 2.63 24.0 96002.000 BRS2000 22.00 6.00 3.00 36.0 125002.250 BRS2250 24.00 6.75 3.38 50.0 157502.500 BRS2500 27.50 7.50 3.75 70.0 195002.750 BRS2755 30.50 8.25 4.13 95.00 23500

Standard Plate Hooks

ForChainSize

Dimensions (in.) WeightEach(lbs.)

W.L.L.(lbs.)

CatalogNo.A B C D L M N T W R

.28 2 1.75 2.50 .93 1 3.68 .12 .63 2.5 .31 2.8 4200 BRPH1/4

.38 2.63 3 4.31 1.18 1.12 6.38 .18 .75 2.75 .38 5.7 7400 BRPH3/8

.50 3.50 4 4.38 1.50 1.50 7.37 .25 1 3.5 .50 13 13000 BRPH1/2

.63 4.38 5 5.43 1.87 1.88 9.25 .31 1.25 5 .63 26.5 20400 BRPH5/8

.75 5.18 6 6.50 2.38 2.25 10.88 .38 1.50 5.75 .75 42 30000 BRPH3/4

.88 6 7 7.63 2.50 2.63 13.68 .43 1.75 6 1 65 40000 BRPH7/8

ADB

C

AD

B

C

C

B

A

B

Dia.

W

30° 10°

N A

RB

M45°

R

RD

C

T

L



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.7

Spe

cial

J-H

ooks

& S

-Hoo

ks

C

E

B

A

D

F

H

J

K

G

B

A

E

D

C

J-Hooks - Blue Ridge Forge

S-Hooks - Blue Ridge Forge

Product Features:

• All lifting devices are certified.• Capacity is subject to change based on specified

dimensions.

Product Features:

• All lifting devices are certified.• Capacity is subject to change based

on specified dimensions.

A

B

C

D

E

Quantity Desired

A

B

C

D

E

F

Quantity Desired

G

H

J

K

Please mark desired lifting eye:

Model IIIModel I

Model II

Dimensions (in.)

Dimensions (in.)

B

A

E

D

C




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.8

E

B

C

D

F

C

E

G

H

J

K

B

E

A

E

B

C

D

F

C

E

G

H

J

K

B

E

A

E

B

C

D

F

C

E

G

H

J

K

B

E

A

E

B

C

D

F

C

E

G

H

J

K

B

E

A

S-Hooks - Blue Ridge Forge

Spring Loader - Blue Ridge Forge

Product Features:


dimensions.

Product Features:


dimensions.

A

B

C

D

E

Capacity

F

G

H

J

K

Quantity Desired

A

B

C

L

Travel

Capacity

Quantity

Rod Dia.

Style 1

Dimensions (in.)

Dimensions (in.)

Style 3

Style 2

Style 4

B

A

L

Travel

C

Special J-H

ooks&

S-H

ooks



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.9

Hea

vy-D

uty

Mat

eria

l Sta

nds

& T

ire

Hoo

ks

Heavy-Duty Material Stands - 500 lbs to 50 Tons Capacity

Tire Hook - Mold Removal - 2,000 lbs Capacity

9.00

12-1/4

4-1/2

3/4

3.50 2.75

Height

Length

Width

5. Casters or fork pockets (check boxes):

p If Caster, specify floor surface material.

p If Fork Pockets, specify pocket dimensions required:

Length Width Height

Note: CG must be centered between horses.

Required Application Specifications:

1. Rated Capacity (lbs):

2. Height Required (at top of stand)

3. Describe product being set on stands:

4. Dimensions:

Length Width Height

For a price quote on your specific application, please complete the above form and fax it to Rockford Rigging at 815-877-0064.

Contact:

Company:

Address:

City, State, Zip:

Phone:

Fax:

Email:

Disengages green tires safely out of mold without any surface damage.

Benefits & Features

• Designed to meet rated capacities. • Available with fork pockets, casters or both

for easy transport. • Stands clearly marked with rated capacity.




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.10

Model 5 - Single Fork Hook - Fixed or Swivel

ModelNumberFixed

ModelNumberSwivel

RatedCapacity

(lbs.)

Dimensions (in.)

A B FixedF

SwivelC D O Weight

(lbs.)5-1 1/2-4 5S-1 1/2-4 3000 4-1/2 2-1/2 4-11/16 6-9/16 1 1 75-1 1/2-5 5S-1 1/2-5 3000 5-1/2 2-1/2 4-11/16 6-9/16 1 1 85-1 1/2-6 5S-1 1/2-6 3000 6-1/2 2-1/2 4-11/16 6-9/16 1 1 9

(Fixed hook shown) (Swivel hook shown)

ModelNumber

RatedCapacity

(lbs.)

Dimensions (in.) Weight(lbs.)A B C D E O

15-2-20 4000 20 6-5/8 2-1/2 10-3/8 1-7/16 1-11/32 6015-5-24 10000 24 9-3/8 2-1/2 11-21/32 1-7/16 1-11/32 68

B A

C

O D

E

Lift Truck Fork

B

A

B

C

D

O

Model 15 - Double Hook Beam - Swivel

ModelNumber Fixed

ModelNumber Swivel

RatedCapacity

(lbs.)

Dimensions (in.) Weight(lbs.) A C D Fixed

FSwivel

F E O

10-2-20 10S-2-20 4000 20 3-1/4 9-1/8 7-1/4 8-7/8 1-1/8 1-5/32 2110-5-24 10S-5-24 10000 24 3-1/4 10-3/4 9-1/4 11-7/16 1-13/16 1-11/16 4210-5-36 10S-5-36 10000 36 3-1/4 16-3/4 9-1/4 11-7/16 1-13/16 1-11/16 80

10-7.5-36 10S-7.5-36 15000 36 4-1/4 16-1/4 13-3/4 15-3/4 2-1/4 2-7/32 16610-10-36 10S-10-36 20000 36 4-1/4 16 14-5/8 16-7/16 2-19/32 2-13/32 18010-15-36 10S-15-36 30000 36 4-1/4 15-7/8 14-1/2 16-5/16 2-19/32 2-13/32 210

A

C F

DE

O

LIFT TRUCKFORK

Model 10 - Single Hook Beam - Fixed or Swivel

Model 10S-2-20 Model 10S-7.5-36

Fork LiftA

ttachments



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

1Fo

rk L

ift

Att

achm

ents

Model FB - Telescopic Fork Lift Booms

Model PB - Telescopic Pivoting Fork Lift Booms

The Fixed length Boom, Model FB, has a telescoping boom with a maximum horizontal reach of 12 feet. This model is available in 3,000, 4,000, 6,000 and 8,000 lb. capacities.

Product Features:

• Alternate hook positions. • Handle at end for easy extension.• Telescoping boom. • Fixed or swivel hooks available.• Restraining chain with grab hook. • Boom locking t-pin.

Product Features:

• Alternate hook positions. • Handle at end for easy extension.• Telescoping boom. • Fixed or swivel hooks available.• Restraining chain with grab hook. • Vertically pivoting boom to 6’-4” height.• Boom locking t-pin.

The pivot Boom, Model PB, has a telescoping boom with a maximum horizontal reach of 12 feet. This model is available in 3,000, 4,000, 6,000 and 8,000 lb. capacities. The versatile Model PB is adjustable vertically in five increments up to a maximum of 40 degrees.

ModelNumber

Dimensions (in.) Maximum Capacity @ Hook Position (lbs.) Weight(lbs.)A B C HR O 3’-6’ 7’ 8’ 9’ 10’ 11’ 12’

PB-302-1/2 7-1/2 22 22-5/8

1.00 3000 3000 2600 2200 1900 1600 1500 350PB-40 1.09 4000 3200 2600 2200 1900 1600 1500 350PB-60

2-1/2 7-1/2 22 22-5/81.36 6000 5000 4200 3500 3000 2700 2500 420

PB-80 1.61 8000 7000 5700 4800 4100 3600 3100 540Note: Models PB-30 and PB-40 are only available with swivel hooks.

O

22.007.50 12.00

TYP

HR

84” MIN144” MAX

(12” INCREMENTS)

30.0036.00

16.562.50

A

C

12.00TYP

EXTENDS TO 12’(1’ INCREMENTS)

7’

PIN HOUSING

PULL PINWITH LANYARD

30.0036.00

HR

B

Note: All dimensions on drawings shown in inches unless stated.

Model FBFixed Type Fork Lift Boom

Note: All dimensions on drawings shown in inches unless stated.Model PBPivot Type Fork Lift Boom

Capacity of lift truck and attachment combination may be less than capacity shown on attachment.

Consult lift truck manufacturer.

ModelNumber

Dimensions (in.) Maximum Capacity @ Hook Position (lbs.) Weight(lbs.)HR O 3’-6’ 7’ 8’ 9’ 10’ 11’ 12’

FB-30 6.66 1.00 3000 3000 2600 2200 1900 1600 1500 350FB-40 6.75 1.09 4000 3200 2600 2200 1900 1600 1500 350FB-60 7.02 1.36 6000 5000 4200 3500 3000 2700 2500 400FB-80 7.27 1.61 8000 7000 5700 4800 4100 3600 3100 535

Note: Models FB-30 and FB-40 are only available with swivel hooks.




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.12

Model FE - Fork Extensions

Model FC - Fork CoversRockford Rigging Fork Covers are specifically designed to protect loads which cannot be marred or scratched. Made from durable nylon webbing, these covers are economical and long lasting.

ModelNumber(Pair)

ExtensionLength(in.)

ForkWidth(in.)

MinimumFork

Length (in.)

LoadCenter(in.)

RatedCapacity

Each (lbs.)

WeightEach (lbs.)

FE4-42 42 4 28 21 1925 25FE4-48 48 4 32 24 1700 28FE4-54 54 4 36 27 1500 32FE4-60 60 4 40 30 1350 35FE4-63 63 4 42 32 1275 37FE4-66 66 4 44 33 1225 38FE4-72 72 4 48 36 1125 42FE5-42 42 5 28 21 2525 30FE5-48 48 5 32 24 2200 34FE5-54 54 5 36 27 1950 38FE5-60 60 5 40 30 1750 42FE5-63 63 5 42 32 1675 45FE5-66 66 5 44 33 1600 47FE5-72 72 5 48 36 1475 51FE5-96 96 5 64 48 1100 67FE6-42 42 6 28 21 3200 36FE6-48 48 6 32 24 2800 41FE6-54 54 6 36 27 2500 46FE6-60 60 6 40 30 2250 51FE6-63 63 6 42 32 2125 53FE6-66 66 6 44 33 2025 55FE6-72 72 6 48 36 1875 60FE6-96 96 6 64 48 1400 80FE7-42 42 7 28 21 4000 42FE7-48 48 7 32 24 3500 48FE7-54 54 7 36 27 3100 53FE7-60 60 7 40 30 2800 59FE7-63 63 7 42 32 2675 62FE7-66 66 7 44 33 2550 65FE7-72 72 7 48 36 2325 71FE7-96 96 7 64 48 1750 94

ModelNumber(Pair)

Fork Cover Dimensions (in.)

A B C

42-1 1/2-4 42 1-1/2 448-1 1/2-5 48 1-1/2 5

48-2-6 48 2 654-1 1/2-5 54 1-1/2 5

84-4-6 84 4 6

B

C

A

• Extensions shall not exceed 1 1/2X the length of the existing forks.

• Extension capacities are reduced beyond existing fork tips (Approx. 60%).

• Do not tip-load the fork extensions. • Load center of gravity must not extend past

existing fork tips.• Capacity of lift truck and attachment

combination may be less than capacity shown on attachment. Consult lift truck manufacturer.

Product Features:

• Ideal for oversized loads.• Easy installation onto existing forks.• Fits standard fork thicknesses.• Standard fork extension widths 4” through 7”.• Standard fork extension lengths 42” through 96”.

Fork LiftA

ttachments



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

3Fi

berg

lass

Bat

ter

Lift

ing

Bea

ms

Models 36 & 36E - Fiberglass Battery Lifting BeamsUsed for applications that require a non-conductive beam such as lifting industrial fork lift truck batteries.

Product Features:

• Lightweight units - 70% lighter than other beams.• Models are available for handling batteries of equal length or

of different lengths.• Heavy duty 4,800 lb. and 7,000 lb. capacities. • Non-conductive fiberglass beam construction.• Acid-resistant, coated polyester straps and hooks.• Standard drop sling length is 10”, other lengths available upon

request.

ModelNumber

RatedCapacity

(lbs.)

StandardSpread (in.)

Dimensions (in.)Weight(lbs.)A B C D E F

36-2.4 4800 36 5/8 3 6 11 27/32 21/32 1636-3.5 7000 36 3/4 2-3/4 5-1/2 12 1 1 20

NOTE: For battery beams other than standard spread. Measure distance between lifting points. Specify Model 36 with beam spread (in even inches) equal to length measured.

Model 36 - Fixed - (Batteries of Equal Length)

ModelNumber

RatedCapacity

(lbs.)

StandardSpread (in.)

Dimensions (in.)Weight(lbs.)A B C D E F

36E-2.4 4800 36 5/8 3 6 21 1 1 1736E-3.5 7000 36 3/4 2-3/4 5-1/2 22-1/2 1-1/8 1-1/8 20

NOTE: For Model 36E lifting beams, battery length cannot differ more than 6 inches from length of beam spread. For battery beams other than standard spread. Take average of shortest and longest batteries, and specify Model 36E with beam spread (in even inches) equal to average lengths. Battery length must be within 12 inches, shortest to longest.

Model 36E - Adjustable - (Batteries of Different Length)

OPTION J: J-Hooks available in place of swivel hooks at a reduced cost.

NOTE: When ordering J-Hook option show Model 36 as 36J, and Model 36E as 36EJ.

A

CB

45°

HEADROOM(1/2 SPREAD +D)

SWIVELHOOK

E

BATTERY

THROATF

SPREAD(MAX. 50”)

A

CB

45°HEADROOM(1/2 SPREAD +D)

SWIVELHOOK

E

BATTERY

THROATF

SPREAD(MAX. 50”)

(SPREAD + 8”)

(SPREAD - 6”)

1”

1”

1/2”

1-1/2”




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.14

Model BEF - Spreader Beam End FittingsProduct Features:

• Build your own spreader beam.• Designed to work with a range of shackle sizes, both top and bottom.• Complies with ASME standards when assembled to specifications

using designated pipe and rigging.

Model HC-BEF - High Capacity Beam End Fitting

Model BEF-PC - Beam End Fitting - Pipe Coupler

Product Features:• Build your own spreader beam.• Pivoting lower lugs allow for 75° to 90° lower rigging angle.• Complies with ASME standards when assembled to specifications


Product Features:

• Add flexibility to your spreader beam end fitting system. • Securely joins two pipe lengths to create a longer spreader beam. • Innovative design reduces sag in the spread system once assembled. • Includes all connecting pin or bolts. • Complies with ASME standards when assembled to specifications


ModelNumber

Max. Capacity(tons)*

Schedule 40Pipe Size

Weight (lbs.)Per Pair

BEF-2-1/2 7.5 2-1/2” 16BEF-5 17 5” 46BEF-8 39 8” 266

* System capacity is determined by span, rigging, and hardware, consult your Rockford Rigging Sales Representative for complete details.

ModelNumber

Max. Capacity(tons)*

Schedule 80Pipe Size

Weight (lbs.)Per Pair

BEF-5HC-25 25 5” 284BEF-5HC-50 50 5” 333BEF-8HC-50 50 8” 440BEF-8HC-80 80 8” 60BEF-12HC-80 80 12” 840BEF-12HC-110 110 12” 992BEF-12HC-130 130 12” 1010

* System capacity is determined by span, rigging, and hardware, consult your Rockford Rigging Sales Representative.

ModelNumber

Use WithModel

Used WithPipe (in.)*

Weight(lbs.)

BEF-PC-2.5 BEF-2 1/2 2-1/2 SCH. 40 8BEF-PC-5 BEF-5 5 SCH. 40 43

BEF-PC-5HC BEF-5HC 5 SCH. 80 105BEF-PC-8 BEF-8 8 SCH. 40 100

BEF-PC-8HC BEF-8HC 8 SCH. 80 160

BEF-PC-12HC BEF-12HC 12 SCH. 80 275* See end fitting assembly instruction for complete pipe specifications.

Model No.Spread (ft.)

Capacity (tons) Weight (lbs.)

Per Pair4 5 6 8 10 12 14 15 16 18 20 22 24 26 28 30 32 34 36

BEF-2-1/2 7.5 7 6.5 5.5 4 2.9 2 1.8 - - - - - - - - - - - 16BEF-5 17 17 17 17 17 16 15 14 13 12 10 8 7 6 5 4.5 - - - 46BEF-8 39 39 39 39 39 38 36 36 35 33 31 29 27 25 23 21 19 16 15 266

Note: Capacity based on minimum 45° top rigging angle. Other sizes available, consult your Rockford Rigging Sales Representative.

Spreader B

eam E

nd Fitting A

ttachments



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

5M

anua

l & R

adio

Con

trol

led

Rig

-Rel

ease

®

Model RR - Manual Rig-Release® UnitProduct Features:

• Rope Guide allows rigging to be released when hook is either above or beside the operator. An upward pull options is available if the hook is located below the operator.

• Designed for rugged outdoor use.• Easy to use - simply rig, lift, set and release.• Lock & capture feature engages with very little load weight (see Minimum Load in

chart below).• Rated load capacity can be lifted from either Lift Arm or the lower Strip Sling Hook.

Do not exceed rated capacity of hook.• Oversized bail for easy mounting on crane hook - 5, 10 & 15 ton units provided

with fixed bails.• Designed and manufactured to ASME standards.

Model RR-R - Radio Controlled Rig-Release® Unit Product Features:

• Allows rigging to be released from a safe distance with the push of a button.• Designed for rugged outdoor use.• Easy to use - simply rig, lift, set and release.• Lock & capture feature engages with very little load weight (see Minimum

Load in chart below).• Includes two 12 VDC 0.8 Amp Hr. sealed maintenance free lead acid batteries

(rechargeable).• Includes one charger, and one vehicle adapter for standard 12 VDC vehicle outlets.• Battery life lasts through an 8 hour shift, depending on frequency of operation.• Minimum required cycle time is 1 - 2 minutes between releases. • Oversized bail for easy mounting on crane hook, 5 ton unit provided with fixed bail.• Designed and manufactured to ASME standards.

ModelNumber

RatedCap. (tons)

Dimensions (inches) Bail Dimensions (inches) Weight(lbs.)D E F G J K L O A B C T

RR-1 1 1.15 0.75 1.25 2.77 4.25 23.10 19.75 0.89 0.63 3.00 6.00 0.63 14RR-2.5 2.5 1.75 1.00 1.50 4.25 9.56 31.67 26.88 1.09 0.63 3.00 6.00 0.63 45RR-5 5 1.83 1.50 1.50 5.00 11.13 36.40 30.75 1.36 2.00 4.00 7.00 1.25 110

RR-10 10 2.25 1.75 2.00 6.31 11.00 41.16 32.13 2.08 2.00 4.00 7.00 1.25 200RR-15 15 3.00 2.50 2.50 6.31 15.00 49.25 39.25 2.27 2.50 5.00 9.00 1.50 325

NOTE: For larger capacities, please consult your Rockford Rigging Sales Representative.

Rigging

ModelNumber

Rated Capacity

(tons)

*MinimumLoad (lbs.)

RecommendedLifting Slings

**Maximum AllowableRigging Weight (lbs.)

Basket Choker Rope Dia. (inches) Basket Choker

RR-1 1 30 15 3/8 14 7RR-2.5 2.5 80 40 5/8 28 14RR-5 5 230 115 7/8 60 30RR-10 10 230 115 1-1/4 100 50RR-15 15 400 200 1-1/2 100 50

ModelNumber

RatedCap. (tons)

Dimensions (inches) Bail Dimensions (inches) Weight(lbs.)D E F G J K L O A B C T

RR-2.5R 2.5 1.75 1.00 1.50 4.25 9.56 31.15 26.88 1.09 0.63 3.00 6.00 0.63 50RR-5R 5 1.83 1.50 1.50 5.00 11.13 36.40 30.75 1.36 2.00 4.00 7.00 1.25 115

NOTE: For larger capacities, please consult your Rockford Rigging Sales Representative.

Rigging

ModelNumber

Rated Capacity

(tons)

*MinimumLoad (lbs.)

RecommendedLifting Slings

**Maximum AllowableRigging Weight (lbs.)

Basket Choker Rope Dia. (inches) Basket Choker

RR-2.5R 2.5 80 40 5/8 28 14RR-5R 5 250 125 7/8 60 30

*If minimum load weight is not met, safety mechanism will not engage into the lock & capture position.

**If maximum allowable rigging weight is exceeded, unit will remain in the lock & capture position and can not be released.If the maximum allowable rigging weight needs to be increased, additional springs can be added, refer to the Instruction Manual.

*If minimum load weight is not met, safety mechanism will not engage into the lock & capture position.

**If maximum allowable rigging weight is exceeded, unit will remain in the lock & capture position and can not be released.If the maximum allowable rigging weight needs to be increased, additional springs can be added, refer to the Instruction Manual.

T

J

L

D E

F

OK

C

A B

G

AJ

B

K

O

C

L

E D

F G

T

1 TonUnit Shown

2-1/2 TonUnit Shown Patent No. 7,380,849

Patent No. 7,380,849

Lifting at less than minimum load can result in injury or death

Lifting at less than minimum load can result in injury or death




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.16

Model F - Beam GrabsProduct Features:

• Heavy duty design.• These grabs provide an efficient method for handling wide flange beam sections and plate girders.• Clamps have a recessed base to accept studs welded to a beam’s surface.• Beam grabs eliminate the need for slings or chokers.• Use only for vertical lifting.• For longer beams or girders, use units in pairs in conjunction with a spreader/lifting beam.• Complies with ASME standards.

Model GC - Girder Clamps

NelsonStud

ModelNumber

RatedCapacity

(tons)

Dimensions (inches)Weight(lbs.)A B C Flange

Width (W)Flange Thickness (THK)

S n t m l pMin. Max.

- F-5 5 22.70 15.70 11.6045

6 - 10

.25

.25

.25

.25

.381

3 3 2 4.60 .50 .50 68

NS-15 F-15 15 30.10 25.10 17.50

78910

11-17

.50

.50

.50

.50

.25

.751

1.251.25

2

4 4 2.50 7.30 .90 .80 182

NS-25 F-25 25 44.80 45.20 24.50 16 - 1718 - 24

1.251

33 5.50 6 4 9.80 1.30 .80 541

NS-35 F-35 35 52.90 61.60 28.50

16 - 1820 - 22

2426

28-26

2.252

1.751.75

1

44444

6 9.30 4.50 8.50 .80 .80 841

Base Dimensions

ModelNumber

RatedCapacity

(tons)

Dimensions (inches)Weight(lbs.)

FlangeWidth

Min. - Max.

Max.Flange

ThicknessA B C

DMin. - Max.

EMin. - Max.

GC - 15 15 6 - 24 3 14.81 3.9 1.6 23 - 44 15.7 - 23.4 234GC - 20 20 6 - 24 3 14.81 5 2.1 23 - 44 18.3 - 25.9 291GC - 25 25 6 - 24 3 14.81 5 2.1 23 - 44 18.3 - 25.9 342

THK

BCW

ACLN M NP

S T

P

E

27" MAX.OPEN

D

C B

A

Use only for vertical lifting

Use only for vertical lifting

Product Features:

• These clamps provide an efficient method for handling wide flange beam sections and plate girders.

• Screw-spindle design ensures positive grip.• Simple design ensures minimum maintenance.• Left-hand thread and right-hand thread screw spindle allows for rapid

lamping and unclamping.• Jaw opening adjusts to a wide range of beam types and flange widths.• Use only for vertical lifting.• Complies with ASME standards.

Beam

Grabs &

Girder C

lamps



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

7B

arri

er G

rabs

.63

7.81"A" MAX.3.0 MIN

10.6

"C"22.67

5.5

6.7

2.0

15.5023.50

33.4HEADROOM

Product Features:

• New, compact & rugged design holds up to the work environment where barriers are used.

• Handles concrete barriers from 6” - 12” nominal width at the top of the barrier.• Stainless steel Auto-Latch.• Auto-Latch mounting insures proper alignment.• Locating assembly orientates tong on barrier without operator intervention. • Gripping pads pivot to conform with the load.• Replaceable polyurethane pads protect barrier. • Alloy steel dog-point pads bite into painted barrier surfaces (typical in coastal areas).• Centering guide cut out on grab shoe helps to properly center tong over

barrier for a level lift.

Model ALG - Adjustable Lifting GrabProduct Features:

• Heavy-duty design to withstand rugged, high-cycle environments.• Infinitely adjustable within range.• Fully adjustable stainless steel Auto-Latch.• Locating assembly orientates grab on load without operator

intervention.• Replaceable polyurethane pads protect load from lifter damage.• Color-coded decal indicates the amount of travel remaining for

each adjustment.• Position indicating decals for easy adjustment. • Extended handles keep operator away from load and can be

adjusted as needed.• Optional hardened alloy steel dog points available. • Lifting eye allows for easy hook attachment, self-centers rigging,

and will accommodate a fork. • Designed and manufactured to ASME B30.20, BTH-1, service

class 3.

Model BLG - Barrier Grabs

ModelNumber

RatedCapacity

(lbs.)

Weight(lbs.)

With Polyurethane Lifting Pads

BLG-4.1/4 8500 602BLG-7.1/4 14500 652

With Steel ‘Dog Point’ Lifting Pads

BLG-4.1/4-DP 8500 602BLG-7.1/4-DP 14500 652

Note: Dimensions shown in inches.

39.1 LATCHED OPEN25.0 LIFTING 6" BARRIER36.8 LIFTING 12" BARRIER

1.0

16.0LOCKED

OPEN

18.0

5.5 1.9

6.6

19.3 LATCHED OPEN42.2 LIFTING 6"26.7 LIFTING 12"

23.5

Place tong on barrier, lower crane completely to disengage the Auto-Latch.

Lift and position barrier in desired location.

Lower crane, line must go slack to engage Auto-Latch, lift tong off

barrier and Repeat!

Model Number

Capacity lbs.

A - Max.Width

C - OverallWidth

Weightlbs.

ALG-3-3/24 6000 24” 72.5 600ALG-3-3/42 6000 42” 90.5 650ALG-3-3/60 6000 60” 108.5 700

Standard Configurations

6” Barriers 12” Barriers Big Blocks




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.18

Model DLT - Die Lifting Tongs - Standard Support Type

Model COF - Clamp-On Bucket Forks

Product Features:

• Broad capacity range.• Low headroom design.• Complies with ASME standards.

Product Features:

• Easily attaches to almost any solid blade bucket.• Sturdy construction.• Open fork design.

Turn your loader into a fork lift. Easy to attach, simply place the lip of the bucket in the slot, tighten the bolt, and lift - there is nothing to weld. Sturdy flame-cut handles make installation and removal fast and easy. The Caldwell Bucket Forks store easily and are very cost effective.

ModelNumber (Pair)

CapacityPer Pair

(lbs.)

Dimensions (in.) WeightPer Pair

(lbs.)LC A B C CG

COF-.95 1900 18 36 2 3 9-1/16 120COF-1.25 2500 21 42 2 4 12-1/4 160COF-2.75 5500 24 48 3 5 16-3/8 240COF-4.5 9000 24 48 3 4 17-9/16 500COF-5.5 11000 24 48 3 5 17-3/4 620

NOTE: Blade tip must be less than 1/2” thick at the tip for proper attachment. Will not work on buckets with teeth. Other sizes available, please consult your Rockford Rigging Sales Representative.

ModelNumber

Capacity(lbs.)

Dimensions (inches) Weight (lbs.)Max. A B C D E F G H

DLT-1-20 2000 20 29 3/4 29 4 5/8 1 8 7 29DLT-1 1/4-28 2500 28 40 1/4 39 5 3/4 1 1/4 8 9 1/2 52DLT-1 1/2-38 3000 38 51 3/4 47 1/2 6 7/8 1 1/2 10 10 3/4 86

D E

C

G

A

FB

HC

lamp-O

n Bucket

Forks & D

ieLifting Tongs



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.1

9A

djus

tabl

eP

alle

t Li

fter

Model 90ACL - Adjustable Load LifterUse your crane to handle a wide range of loads. Product Features:

• Once the bail pin is set the pallet lifter remains balanced whether full or empty to make the job faster and safer.

• Adjustable bail provides for balanced handling of items with different load centers.

• Adjustable throat allows for the correct handling of higher stacked loads. • Adjustable forks allow for proper placement of the forks spread.• The auto return bail automatically levels empty pallet lifter saving time

and effort.• Heavy duty construction for years of trouble free service.• Complies with ASME standards.

Model BC - Beam Clamp

Model BT - Beam Tongs

Product Features:

• Rated load capacity of one ton.• Economical and convenient.• Lightweight and portable design, high strength construction.• Use only for vertical lifting. • Complies with ASME standards.

Product Features:

• Tong provided with lifting shackle.• Load must be balanced and controlled when lifting.• Use only for vertical lifting. • For added stability when handling longer loads, use in

pairs with a spreader beam.• Complies with ASME standards.

ModelNumber

RatedCapacity

(tons)

FlangeWeight(lbs.)Min.

(in.)Max.(in.)

55 - 1 1 4 6 10Shackle not included (13/16” dia. hole for up to 3-1/4 ton shackle).

ModelNumber

RatedCapacity

(tons)

Dimensions (inches)Weight(lbs.)Beam Width

Min. - Max.Max. Flange

ThicknessHead Room

111 - 1 1 5 - 6 5/8 17 15111 - 2 2 6.50 - 8 3/4 19 18111 - 3 3 7.50 - 10 3/4 19 21

.756.25

.50

4.25

13/16 DIA.FOR UP TO 3-1/4 TON SHACKLE

.5

4

HR

W

MAX.BEAM WIDTH

ModelNumber

RatedCapacity

(tons)

Dimensions (in.)

Weight(lbs.)

Fork Bail Throat HR Headroom(at min. throat)

HR Headroom(at mid. throat)

HR Headroom(at max. throat)

E F GH

A B C TJ K K K

Min. Max. Min. Mid. Max. Min. Max. Min. Max. Min. Max.90ACL-2 2 43.00 2.00 4.00 17.50 36.00 .88 3.00 5.00 0.75 40.68 52.68 64.18 54.88 60.68 66.63 72.44 78.38 84.18 515

C

A B TK J

G

FH E

Close-up of adjustable fork

Bail Stop Pin

Other standard tongs are available: Slab, Concrete Pressure Tongs & Rail Tongs




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.20

Model 32 - Adjustable Spreader Beams

Model 16 - Adjustable Spreader/Lifting BeamProduct Features:

• Adjustable lifting points.• Handles both wide and unbalanced loads.• Low headroom capability.• Shackles included.• Add chain top rigging for additional stability.• Optional swivel hooks available.• Optional chain top rigging available. • Complies with ASME standards.

Product Options:

• OPTION S - Pair of swivel hooks• OPTION C - Chain top rigging• OPTION B1 - One cross beam• OPTION B2 - Two cross beams

* Specify spreads

Product Features:

• Ideal where headroom is not limited.• Adds stability to lift.• Telescopic spread standard.• Spread adjusts in 1” increments. • Available with standard chain or wire rope

rigging.• Available with Adjust-A-Leg® rigging for off

center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating).

• Wide range of additional sizes and capacities available.

• Complies with ASME standards.

Top Rigging Options:

• OPTION C - Chain top rigging from beam to crane hook with coupler attachment.

• OPTION W - Wire rope top rigging from beam to crane hook. WR Lug required for 25-40 TON capacity beams.

ModelNumber

RatedCapacity

(tons)

Spread(in.)

BailAdjustment

(in.)

HR Headroom

(in.)

Bolt TypeAnchor Shackle

(tons)Weight(lbs.)

Max. Min. Top Bottom16-1/4-4 1/4 48 12 16 7.13 1.5 1.5 4016-1/2-4 1/2 48 12 16 7.13 1.5 1.5 4016-1/2-6 1/2 72 36 24 10.00 1.5 1.5 10016-1/2-8 1/2 96 48 32 10.00 1.5 1.5 13516-1/2-10 1/2 120 60 40 10.00 1.5 1.5 145

16-1-6 1 72 36 24 10.00 1.5 1.5 10016-1-8 1 96 48 32 11.00 1.5 1.5 14016-1-10 1 120 60 40 11.00 1.5 1.5 17516-2-6 2 72 36 24 12.50 3.25 2 13016-2-8 2 96 48 32 13.50 3.25 2 20016-2-10 2 120 60 40 14.50 3.25 2 28016-4-8 4 96 48 32 16.75 4.75 4.75 29016-4-10 4 120 60 40 18.75 4.75 4.75 42016-4-12 4 144 72 48 18.75 4.75 4.75 50016-5-8 5 96 48 32 18.75 6.5 4.75 32016-5-10 5 120 60 40 20.25 6.5 4.75 46516-5-12 5 144 72 48 20.25 6.5 4.75 55016-7-12 7 144 72 48 23.75 8.5 6.5 790

Capacity(tons)

ModelNumber

Spread(ft.)

Min./Max.

HR HeadroomMin./Max.

w/chain(in.)

WeightBeam &Hooks(lbs.)

AOblong

Dia.(in.)

BOblongWidth(in.)

COblongHeight(in.)

F - HookTo BeamBottom

(in.)

O - HookOpeningw/latch

(in.)

ChainRiggingWeight(lbs.)

2

32-2-4/6 4 / 6 48/57 70

1/2 2.36 3.94 5.5 0.97

932-2-6/10 6 / 10 72/88 85 1332-2-8/14 8 / 14 96/113 175 1732-2-12/20 12 / 20 132/166 245 23

5

32-5-4/6 4 / 6 55/64 105

1 5.38 7.09 8.4 1.41

3432-5-6/10 6 / 10 79/95 160 4732-5-8/14 8 / 14 102/126 205 6132-5-12/20 12 / 20 138/172 670 82

10

32-10-4/6 4 / 6 60/69 130

1-1/4 5.71 10.83 10.6 1.78

4932-10-6/10 6 / 10 74/111 175 6932-10-8/14 8 / 14 108/132 460 8832-10-12/20 12 / 20 144/163 680 118

15

32-15-4/6 4 / 6 64/72 165

1-1/2 5.90 10.5 13.6 2.22

7832-15-6/10 6 / 10 87/104 365 11132-15-8/14 8 / 14 111/135 478 14532-15-12/20 12 / 20 147/180 700 194

4.00BAIL ADJ.

HR

SPREAD MIN.SPREAD MAX.

6.00

HR

C BA

45°

SPREADF

O

Custom4 Point Lift

Custom3 Point Lift

Standard2 Point Lift

Shown WithOption C

SpecifyTop Rigging

Adjustable

Spreader B

eams



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

1Lo

w H

eadr

oom

Spr

eade

rLi

ftin

g B

eam

s

Model 20 - Low Headroom Multiple Spread Lifting BeamIdeal where headroom is limited.

Standard Features:

• Three spreads to adjust to the load- Outside spread- Middle spread (outside less 1’)

- Inside spread (outside less 2’)

Product Features:

• Beams over 6’ and longer have 3 spreads.• 3’ & 4’ beams have 2 spreads.• Swivel hooks with hook latches standard. • Wide range of sizes and capacities available.• Complies with ASME standards.

Capacity(tons)

Model NumberHR Headroom (in.)

Weight (lbs.)

Outside Spread (feet)Other

Dimensions (in.)3 4 6 8 10 12

1/2Model NumberHR Headroom

Weight

20-1/2-312-3/4

40

20-1/2-412-3/4

50

20-1/2-612-3/4

65

20-1/2-812-3/4

95

20-1/2-1013-3/4

140

20-1/2-1213-3/4

160

A=7/8 B=3 C=5

T=3/4O=7/8

1Model NumberHR Headroom

Weight

20-1-312-3/4

40

20-1-412-3/4

50

20-1-613-3/4

85

20-1-813-3/4

115

20-1-1014-3/4

165

20-1-1215-3/4

230

A=7/8 B=3 C=5

T=3/4O=7/8


Weight

20-2-313-3/4

50

20-2-413-3/4

65

20-2-614-3/4

100

20-2-816-1/2

165

20-2-1017-1/2

230

20-2-1218-1/4

315

A=7/8 B=3 C=5

T=3/4O=7/8


Weight

20-3-315-1/4

70

20-3-415-1/4

80

20-3-616-1/4

140

20-3-817-1/4

200

20-3-1018-1/4

275

20-3-1222-1/2

415

A=1-1/4 B=3 C=5

T=1O=1


Weight

20-5-319-1/2

115

20-5-420-1/2

145

20-5-621-1/2

205

20-5-825-1/2

325

20-5-1025-1/2

390

20-5-1227-1/2

580

A=2 B=4 C=7

T=1-1/4O=1-15/16

7-1/2Model NumberHR Headroom

Weight

20-7 1/2-322-1/2

135

20-7 1/2-423-1/2

170

20-7 1/2-625-1/4

265

20-7 1/2-827-1/4

415

20-7 1/2-1027-1/4

500

20-7 1/2-1230-1/4

910

A=2 B=4 C=7

T=1-1/4O=1-1/2


Weight

20-10-323-1/4

150

20-10-425-1/4

205

20-10-627-1/4

335

20-10-827-1/4

420

20-10-1030-1/4

775

20-10-1230-1/4

910

A=2 B=4 C=7

T=1-1/4O=1-9/16


Weight

20-15-328-1/2

215

20-15-430-1/2

295

20-15-630-1/2

375

20-15-833-1/2

685

20-15-1033-1/2

820

20-15-1240-1/41180

A=2-1/2 B=5 C=9

T=1-1/2O=2-1/16


Weight

20-20-338-3/4

370

20-20-438-3/4

435

20-20-638-3/4

575

20-20-838-3/4

710

20-20-1041-1/21070

20-20-1241-1/21235

A=2-1/2 B=5 C=9

T=1-1/2O=2-1/4

O

C

B A T

HR

SPREAD - 2FTSPREAD - 1FT

SPREAD

Recommend faspins (Option B) if frequent hook position changes (spread) are required.

Available to 50 ton capacity and available up to 40 foot lengths

OPTION AExtra Holes or Different

Placement of HolesAllows multiple hook positioning beyond standard spreads.

Specify number and spread(s) required.

OPTION BFaspins

For ease of positioning hooks with quick release. Specify

number required.

OPTION CExtra Hooks

Allows for multiple pick points. Specify number required.

OPTION DPin Type Bail

Lifting pin located between structural

channel. (Hoist hook information must

be supplied.)

OPTION EShackle Lug

Lifting lug with shackle. (Headroom may change.)




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.22

Model 22 - Heavy Duty Twin Basket Sling Lifting BeamProduct Features:

• Designed to be used with slings in a basket hitch.• Specially designed hooks with hook latches minimize

potential sling damage. • Two sets of fixed hooks are standard in all lengths over 4’. • The inner set of hooks (S2) are 1/2 the overall spread.• Extra spreads available upon request.• Complies with ASME standards.

Available to 50 ton capacity

Capacity(tons)

Model NumberHR Headroom (in.)

Weight (lbs.)

Spread (feet)Other

Dimensions (in.)3 4 6 8 10 12 14 16 18 20 24 30

1/2Model NumberHR Headroom

Weight

22-1/2-38-1/2

50

22-1/2-48-1/2

65

22-1/2-68-1/2110

22-1/2-88-1/2150

22-1/2-109-1/2200

22-1/2-129-1/2220

22-1/2-1410-1/2

298

22-1/2-1610-1/2

331

22-1/2-1811-1/2

424

22-1/2-2011-1/2

463

22-1/2-2412-1/2

627

22-1/2-3013-1/2

855

A=7/8 B=3 C=5

T=3/4O=1-1/16


Weight

22-1-38-1/2

50

22-1-48-1/2

65

22-1-69-1/2145

22-1-810-1/2

210

22-1-1010-1/2

230

22-1-1211-1/2

290

22-1-1411-1/2

338

22-1-1612-1/2

390

22-1-1813-1/2

539

22-1-2013-1/2

588

22-1-2415-1/2

907

22-1-3015-1/21150

A=7/8 B=3 C=5

T=3/4O=1-1/8


Weight

22-2-39-1/2

70

22-2-410-1/2

90

22-2-610-1/2

160

22-2-811-1/2

225

22-2-1012-1/2

300

22-2-1213-1/2

375

22-2-1413-1/2

447

22-2-1614-1/2

515

22-2-1815-1/2

725

22-2-2015-1/2

815

22-2-2417-1/21221

22-2-3020-1/22272

A=7/8 B=3 C=5

T=3/4O=1-1/8


Weight

22-5-313-1/2

90

22-5-414-1/2

160

22-5-615-1/2

275

22-5-816-1/2

350

22-5-1016-1/2

450

22-5-1216-1/2

500

22-5-14*19

854

22-5-16*19-1/2

940

22-5-18*22-1/21398

22-5-20*22-1/21650

22-5-24*22-1/22144

22-5-30*25-1/22330

A=2 B=4 C=7

T=1T=1-1/4O=1-1/8

7-1/2Model NumberHR Headroom

Weight

22-7 1/2-314-1/2

155

22-7 1/2-415-1/2

180

22-7 1/2-616-1/2

330

22-7 1/2-817-1/2

410

22-7 1/2-1017-1/2

500

22-7 1/2-1219-1/2

700

22-7 1/2-1422-1/21162

22-7 1/2-1622-1/21300

22-7 1/2-1822-1/21468

22-7 1/2-2022-1/21606

22-7 1/2-2425-1/22354

22-7 1/2-3025-1/22877

A=2 B=4 C=7

T=1-1/4O=1-3/4

C

B A

S2

HR

T

O

SPREAD

Model 18 - Fixed Twin Basket Sling Lifting BeamProduct Features:

• Designed to be used with slings in a basket hitch.• Provides greatest clearance in low headroom applications.• Two sets of bent bar hooks are standard on units with a

spread of 6’ and greater.• Spread 2 is 1/2 of spread 1.• Hooks are designed to handle up to a 2” sling eye width.• Complies with ASME standards.

Model 17 - Adjustable Lifting BeamProduct Features:

• Bail adjusts horizontally for lifting unbalanced loads.• Provides clearance in low headroom applications.• Spread adjusts in 6” increments along lifting beam.• Shackles included.• Optional swivel hooks available.• Complies with ASME standards.

Low H

eadroomS

preaderLifting B

eams



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

3D

ura-

Lite

™C

ompo

site

Lift

ing

Bea

ms

Dura-Lite™

For Multiple Lifting Applications

Model 416 - Dura-Lite™ Composite Adjustable Lifting Beams

Model 427 - Dura-Lite™ Composite 4 Point Lifting Beams

Caldwell manufactures standard models of lifting and spreader beams ranging from 1/4 to 3 tons. We can design and build custom equipment to suit your specific application.

Dura-Lite™ Product Features:

• Lightweight• Non-Conductive• Corrosion Resistant• Complies with ASME B 30.20 design

category B, service class 4• Proof tested with certificate issued

PAT NO. US 9,359,174, B2

PAT NO. US 9,359,174, B2

Provided as shown with lifting ring and load hooks.


3 Ton 4’ BeamBeam Only: 46 Lbs. • Beam With Hardware: 57 Lbs.




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.24

Model 419 - Dura-Lite™ Composite Lifting Beams

Model 430 - Dura-Lite™ Composite Spreader Beams

PAT NO. US 9,359,174, B2

PAT NO. US 9,359,174, B2


Provided as shown with polyester top rigging and load hooks.

Available in 1/4, 1/2, 1, 2, and 3 ton capacities.Beam lengths available from 2’ to 14’.

A 3 ton 4’ beam is only 57 pounds.

Available in 1/4, 1/2, 1, 2, and 3 ton capacities.Beam lengths available from 2’ to 20’.

CapacityIn Tons

ModelNumber

SpreadInches

HeadroomInches

Beam OnlyWeightPounds

Weight WithHardwarePounds

Bail Dimensions (In.) HookOA B C

1/4

430-1/4-2 24 24 5 9

0.62 2.8 5 0.89

430-1/4-3 36 30 7 11430-1/4-4 48 36 9 13430-1/4-6 72 48 14 17430-1/4-8 96 60 18 22

3

430-3-2 24 27 11 24

0.62 2.8 5 1430-3-3 36 33 13 27430-3-4 48 42 25 40430-3-6 72 54 49 64

O

C

A

B

Dura-Lite™

Com

positeLifting B

eams



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

5C

oil H

ooks

Model 80H - Dixon Coil Hook with Pivoting WedgeProduct Features:

• Easy horizontal to vertical upending of coils.• Pivoting wedge for easy tilting of stacked coils.• Wedge acts as retainer. • Efficient and easy to use.• Popular for use with small, lightweight coils.• For use where overhead clearance is limited.• Specially designed heat treated pivoting wedge.• Complies with ASME standards.

Model 82 - Heavy Duty C-HookProduct Features:

• Designed for heavy duty applications.• High tensile alloy steel plate reduces physical

size and weight.• Counter balanced to hang level when empty.• Inside radius on hooks avoid coil edge contact.• Curved coil saddle is standard.• Guide handles for ease of hook positioning.• Handles a wide range of coil widths.• Available with optional padding for additional

coil protection.• Complies with ASME standards.

ModelNumber

Capacity(tons)

Dimensions (inches)Weight(lbs.)Max.

WidthMax.

RadialMin.I.D.

HRHeadroom A B C D T W

80H-1/2-6/13 1/2 6 13 9 13/16 2 3-5/16 6 1/2 3-1/2 2080H-1/2-12/13 1/2 12 13 13 13/16 2 3-5/16 6 1/2 3-1/2 28

80H-1-8/16 1 8 16 10 13/16 2 3-5/16 6 1/2 3-1/2 2380H-2-10/18 2 10 18 12-1/2 1 2-5/8 4 6-3/4 3/4 2 42

80H-3.5-12/20 3-1/2 12 20 14-1/2 1-3/16 3-5/8 5-5/16 7-3/4 1 2-1/2 80Other sizes available, please consult your Rockford Rigging Sales Representative.

Model Number

Capacity(tons)

Dimensions (inches)

Weight(lbs.)

Coil Width Throat

Lifting ArmHR

Headroom

Bail Dimensions

Length Depth Width Opening Thk.TMax. Min. L D W A B C

82-5-3682-5-4882-5-60

5364860

243036

242424

303948

5-5/166-1/86-9/16

444

37-3/838

38-1/2

1-1/21-1/21-1/2

444

777

1-1/41-1/41-1/4

420584680

82-7 1/2-3682-7 1/2-4882-7 1/2-60

7-1/2364860

243036

242424

303948

5-5/86-5/166-15/16

444

37-1/238-1/4

39

1-1/21-1/21-1/2

444

777

1-1/21-1/21-1/2

615774942

82-10-4882-10-6082-10-72

10486072

303642

242424

394857

7-1/47-1/27-1/4

444

41-1/441-3/842-1/2

222

555

999

1-3/41-3/41-3/4

92812951616

82-15-4882-15-6082-15-72

15486072

303642

303030

394857

7-1/48

8-3/4

444

47-7/848

48-3/4

222

555

999

1-3/41-3/41-3/4

145018242227

82-20-6082-20-72 20 60

723642

3030

4857

9-1/810

44

52-1/852-5/16

2-1/42-1/4

66

1212

22

21752625

82-25-6082-25-72 25 60

723642

3434

4857

99-3/4

44

57-3/458-1/2

2-1/22-1/2

66

1414

2-1/42-1/4

28203570

82-30-6082-30-72 30 60

723642

3434

4857

9-7/810-5/8

44

58-3/459-3/8

2-3/42-3/4

66

1414

2-1/22-1/2

31803800

82-40-72 40 72 42 38 57 11 11-3/4 68 3-1/4 7 18 3 535082-50-84 50 84 48 45 64-1/2 13 6 71-7/8 3-3/4 7 18 3 7470

Other sizes available, please consult your Rockford Rigging Sales Representative.

TA

D

W

CB

MAX.WIDTH MAX.

RADIAL

HR

GUIDEHANDLES

W

A

C

B

NOTE: E = Maximum coil width ÷ 2

Center of the hoist and ball must be in-line with the load’s center of gravity




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.26

Model 64 - Standard Duty Sheet LifterProduct Features:

• Lightweight.• Channel steel construction.• 84” grab shoe length.• Complies with ASME standards.

Model 60 - Heavy Duty Sheet Lifters

Product Options:

• Hand wheel lockout.• Motorized leg adjustment, includes pendant controls. • Battery powered motorization.• Chain-wheel leg adjustment. • Extended length hand wheel leg adjustment.• End chains with plate hooks (recommended for all

widths 72” and greater).• Extended grab shoe lengths available.• Additional bundle clearance available (longer legs).

Product Features:

• Versatile handling of bundles, sheets, plates and other materials stacked horizontally.

• Low headroom design for optimum lifting capabilities.• One person operation minimizes handling cost.• Self-locking worm gear drive for leg adjustment is

standard.• Easy adjustment for different sheet widths.• Rack and pinion leg drive.• Designed for ease of maintenance.• Designed for greater sheet width range.• Complies with ASME standards.

ModelNumber

Capacity(tons)

Dimensions (inches)Weight(lbs.)

Bundle Width HRHeadroom

ShoeD

Min.Aisle

Bail Opening

Min. Max. A B C T

64-2-36

215 36

29 2-1/2 8 1-1/2 3 5 3/4510

64-2-48 20 48 56064-2-60 24 60 63064-5-48

520 48

32 2-5/8 8 2 4 6 1670

64-5-60 24 60 75064-5-72 30 72 830

64-7 1/2-48

7-1/220 48

34 2-1/2 10 2 4 6 1840

64-7 1/2-60 24 60 90064-7 1/2-72 30 72 980


ModelNumber

Capacity(tons)

Dimensions (inches)Weight(lbs.)Bundle Width HR

HeadroomShoe

DMin.Aisle

Bail Opening

Min. Max. A B C T

60-3-48

316 48

28 2.63 9 1.5 3 5 .75920

60-3-60 16 60 95060-3-72 16 72 98060-5-48

5

16 48

29 2.63 9 2 4 6 1

112560-5-60 16 60 117060-5-72 16 72 122060-5-84 16 84 127060-5-96 16 96 155060-10-48

10

16 48

30 3.5 11 2 4 7 1.5

151060-10-60 16 60 157060-10-72 16 72 164060-10-84 16 84 170060-10-96 16 96 177060-15-48

15

16 48

32 3.5 12 2.5 5 9 1.5

157060-15-60 16 60 164060-15-72 16 72 170060-15-84 38 84 196060-15-96 38 96 2030


HR

BAIL OPENING

96”DBUNDLEWIDTH

16”

C

A

B T

A

C

B T

HR

BAIL OPENING

84”DBUNDLEWIDTH

16”

Bail Opening

Bail Opening

Do not lift loosely bundled, thin or oily sheets.

Do not lift loosely bundled, thin or oily sheets.

Sheet Lifters



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

7P

osi-T

urne

r®

Lift

ers

Standard Posi-Turner® - Fixed BailThe core feature of the Posi-Turner® is the smooth and controlled rotation. The Posi-Turner® suspends and rotates objects 360 degrees or more with controlled rotation. This series of photos, featuring a twin bail unit, shows how rotation with the Posi-Turner® is efficient and damage free.

Product Features:

• Fixed Posi-Turner® will rotate load during lift.• Custom sizes are available.• Push button pendent control standard.• Complies with ASME standards.

Many variations available 500 lbs to 50 tons.Fixed, Leveler, Auto-Latch & Independent Drive -

Call for an application evaluation.




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.28

Standard Posi-Turner® - Leveler Bail

Posi-Turner® Auto-Leveler™ - How It Works

Posi-Turner® Independent Drive System

Load slings are slack. Leveler bail is centered. Auto-Leveler™ switch is engaged.

Consists of two powered drive units suspended from two cranes/hoists, with pocketed sheave driving special coil link chain slings that rotate large heavy, bulky items for assembly, welding positioning, and inspection. Drive units can either be operated independently or together, through an operator pendant(s), or remote control.

Manual / Automatic switch and direction indicator lightson outside of Auto-Leveler™ control box.

SINGLE ROLLER SLING SPAN

DOUBLE ROLLER SLING SPAN

HR

HR

SINGLE ROLLER SLING SPAN

DOUBLE ROLLER SLING SPAN

HR

HR

Available in sizesfrom 500 lbs. to 50 ton.

Posi-Turner

®

Lifters



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.2

9V

acuu

mLi

fter

s

UNIVAC® Vacuum LiftersUNIVAC® Vacuum Lifters are designed for efficient, one-person operation in lifts of semi-porous and non-porous material. Unlike magnets or edge grabs, vacuum units will not mark or scratch material surfaces or edges. Additionally, vacuum lifters can easily lift nonferrous metals and thin sheets (under 1/4”).

Model D - Twin Crossarms with 4 Pads - Standard DutyProduct Features:

• Ball mounted vacuum pads.• Brass fittings.• Push lock hose (designed for 250 psi).• Slide valves allow for manual isolation of vacuum pads.• Muffler/filter is spin on type for easy change out.

For lifting wide or thin material. The crossarms make the load easier to balance.

• Increase productivity, reducing cost.• One person operation.• Eliminate material damage.• Precision handling made easier.

• Versatile handling of most materials.• Improve storage space.• Provide a low maintenance lifter.• Durable for long lasting service.

Benefits your company will receive with UNIVAC® Vacuum Lifters:

I.D. Nameplate

Add FEET to blank Model Number box to complete code.Example: 5’ load beam - DA16V8-LENGTH-D3

RatedCapacity

(lbs.)

Base Wt.@ 5’ (lbs.)

ModelNumber Power-Pac

FlaredDiameter

(in.)

Load Beam Length (ft.)

5 6 8

Electric

With 3’ Crossarm Beams

680 290 DE6S6-_____-D3 UNIVAC-250 7-1/4 5 6 81240 310 DE12S8-_____-D3 UNIVAC-250 9-5/8 5 6 81600 350 DE16V8-_____-D3 UNIVAC-250 10-5/8 5 6 82400 365 DE24V10-_____-D3 UNIVAC-250 12-1/4 5 6 8


680 300 DE6S6-_____-D4 UNIVAC-250 7-1/4 5 6 81240 315 DE12S8-_____-D4 UNIVAC-250 9-5/8 5 6 81600 360 DE16V8-_____-D4 UNIVAC-250 10-5/8 5 6 82400 375 DE24V10-_____-D4 UNIVAC-250 12-1/4 5 6 8

Shop Air - Venturi


680 315 DA6S6-_____-D3 V-40 7-1/4 5 6 81240 315 DA12S8-_____-D3 V-40 9-5/8 5 6 81600 320 DA16V8-_____-D3 V-40 10-5/8 5 6 82400 335 DA24V10-_____-D3 V-40 12-1/4 5 6 8


680 325 DA6S6-_____-D4 V-40 7-1/4 5 6 81240 325 DA12S8-_____-D4 V-40 9-5/8 5 6 81600 330 DA16V8-_____-D4 V-40 10-5/8 5 6 82400 345 DA24V10-_____-D4 V-40 12-1/4 5 6 8


Model DE6S6-6-D3 shown.

Univac® 250 for capacities less than 1,240 pounds.

Nominal Applications Narrow Applications Wide Applications Vacuum Upenders

Uniclamp™Specialty ApplicationsMechanical Vacuum Lifters

Model DE16V8-6-D3 shown

Univac® 250 for capacities of 1,240 to 2400 pounds.

Many Applications Available




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.30

Cranes

H-Series Heavy Duty Floor MountedJib Crane 1/2 Ton – 5 Ton Capacity

TRW-Series Overbraced Tie Rod Wall MountedJib Crane 1/2 Ton – 3 Ton Capacity

FL-Series Foundationless Floor Mounted JibCrane 1/4 Ton – 1/2 Ton Capacity

PM-Series Pillar Mounted Jib Crane1/2 Ton – 2 Ton Capacity

MC-Series Portable Jib Crane1/8 Ton – 1/4 Ton Capacity

CW-Series Cantilevered Wall MountedJib Crane 1/4 Ton – 3 Ton Capacity

FG-Series Fixed Height Gantry Crane1 Ton – 5 Ton Capacity

TG-Series Telescoping Gantry Crane1 Ton – 5 Ton Capacity

Required Information:

Capacity ___________ Span ___________ Floor Structure ___________

Cranes, B

aseT

ie Rod &

Gantry C

ranes



FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


Catalog Vol: 18w

ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.3

1Li

ght

Dut

y Fr

eest

andi

ng

Wor

ksta

tion

Cra

ne

Sys

tem

s

Demag Freestanding Workstation CranesWith longer spans, higher capacities and effortless load control.

Demag’s KBK Freestanding Workstation Cranes are a proven and reliable solution for your lifting needs. Specifically designed to handle loads up to 4,400 lbs., our freestanding workstation cranes can be easily installed into an existing or new workstation to provide instant lifting assistance. With spans ranging from 10 to over 34 feet available and 10 different track profiles, Demag’s KBK workstation cranes enable you to optimize the working area below the crane and improve productivity.

• Effortless and Precise ControlDemag’s Freestanding Workstation Cranes feature patented articulating hanger assemblies and trolleys which deliver effortless and precise load movement – especially near the end of the bridge crane.

• Additional Standard OptionsOur track profiles, standardized in one meter increments, optimize the weight of your crane bridge and complete system.

• Enhanced Structure StabilityLeveraging proven Demag engineering, we have developed an industry leading reliable base structure that does not require cross bracing to your building or field welding. Our workstation cranes can successfully be set up nearly anywhere on a concrete floor where it will support the required anchor bolt force.

• Proven TechnologyFor more than 50 years, KBK enclosed track has been the world leader in this field and has achieved the prestigious Monorail Manufacturers Association (MMA)certification.

• Complete SolutionOur customers benefit from seamless product integration and improved efficiencies as we provide a complete, single-point-of-contact, manufactured crane solution including a complete line of chain hoist products.

Demag Application Support

• Easily design your Workstation Crane with Demag’s enhanced configuration program – Newly developed capabilities and features.

• Quick Quoting – Don’t have access to our configuration program? Contact Rockford Rigging to receive a quote.

• World-class, knowledgeable customer support – contact Rockford Rigging to speak with product experts.




FABRICATED PRODUCTS




[email protected]


[email protected]








[email protected]


[email protected]


ww


Cata

log

Vol:

18w

ww

.roc

kfor

drig

ging

.com

H.32

Demag Freestanding Workstation CranesBasic features with high qualityThe operational range of the new DC-Com chain hoist is tailored to applications for standard requirements – just right for everyday use. It has all the quality standard features you expect from a Demag product.

DC-Com units can be easily integrated into the Demag KBK Crane Construction Kit enclosed track system. The new generation of U 11/U 22 trolleys provides smooth transfer of your loads on I-bean girders.

This is what the new Demag DC-Com chain hoist has to offer:

• Simple installation.• Plug & lift and Plug & Drive – all electrical and control connections are

a quick disconnect design.• Simple hook and hoist to the trolley using the folding suspension lug.• The flange width of the U 11/U 22 trolley is infinitely adjustable to

accommodate a variety or I-beams.

CapacityLb. (kg)

Chain HoistType Reeving

Hoist speedFt/min

at 60 Hz

CDF%

Liftft (m)

FEM Groupof

Mechanisms275 (125) DC-Com 1 32/8 60 16 * 2m550 (250) DC-Com 2 16/8 40 16 * 1Am100 (500) DC-Com 5 1/1 16/8 40 16 * 1Am

2200 (1000) DC-Com 10 16/4 40 16 * 1Am4400 (2000) DC-Com 10 2/1 16/4 40 16 * 1Am

* Longer hook on request

Light Duty Freestanding

Workstation C

rane S

ystems



SLINGS Fabricated

Documents

Transcript of SLINGS Fabricated