SL500 Modular Library System. Objectives Locate needed information. Define the safety and ESD...
-
Upload
penelope-cobb -
Category
Documents
-
view
222 -
download
2
Transcript of SL500 Modular Library System. Objectives Locate needed information. Define the safety and ESD...
Objectives
• Locate needed information.• Define the safety and ESD requirements. • Identify and locate major components.• Unpack , install & configure the library.• De-install the Library.• Configure switches, bridges and hubs.• Label and route cables drives to other
equipment.• Verify and /or install library firmware.
Objectives
• Setup and operating performance.• Diagram and document the installation.• Update the site logs to reflect the customer’s
subsystem configuration.
Prerequisites
• SL500 Principles of Operation• SAN Concepts and Connectivity.• L-Series Library course.• LTO Ultrium course.• SDLT course.
Personal Safety
• Safety Precautions• Lifting Techniques• Shoulder, Elbow, Wrist, and Hand Safety• Fiber -optic Safety • Rack Safety
Product Precautions
• Electrostatic Discharge (ESD) Damage Prevention
ESD PrecautionsESD Protection Procedure
Prepare the work AreaAccess the EquipmentReplace componentsCleanup
• Fiber – optic Cable InstallationCable routingCable ManagementConnector protection
Planning the Installation
• General InformationPrepare the Installation locationKnowledge in SCSI principlesKnowledge in Fibre channel principlesConfiguration Diagram
SL500 Tape Library Types• Library with LTO Cartridge Slots• Library with Mixed-Media Cartridge Slots
Library with LTO Cartridge Slots
• The Base module contains 50 cartridge slotsOne or two tape drives5 – slot cartridge access port(CAP)
LTO Slot Physical Configurations
• Slot Numbering scheme Four Integers
1. Library number 2. Library module number3. Library row number4. Library column number
Installation Steps Unpacking Inspection Preparation of Rack Install Base Unit Install Robotics Unit Install Façade Install an Expansion Module Install the Drive Tray Assemblies Install the Power Cables Install the Library SCSI or Fiber Channel Cables Inserting Cartridges Locking the Front Door and Powering-on the Library
Library FRU List Cards
MPU2 MPW RLB RLC RLE RLM
Fans Operator Panel Power Supply Robotics unit
Drive FRU list
Remote Access Tools• Stream Line Library Console• Service Delivery Platform(SDP)• Motive Insight• ACSLS