Sky400 Series - SkyFidelity, Inc.skyfidelityinc.com/wp-content/uploads/2016/11/Sky400-Series.pdf ·...

©2016 SkyFidelity, Inc. | All Rights Reserved www.SkyFidelityInc.com

Sky400 Series eXtreme Power AC1750 2.4GHz/5GHz 3x3 +Heater Outdoor Bridge/AP (800mW)

EAN Code : 4712757152760

SkyFidelity’s Sky400 Series eXtreme Power AC1750 2.4GHz/5GHz 3x3 +Heater Outdoor Bridge/AP (800mW) is a dual band outdoor AP that combined superior functionality with an elegant and highly durable housing design. This 11ac outdoor concurrent dual band access point supports throughput of up to 1750Mbps data rate for high performance deployment in enterprise environments. Sky400 Series utilizes two 3 stream radios, one operating on the 2.4GHz band and one operating on the 5GHz frequency band. Sky400 Series’s high performance supports up to 150 concurrent client connections, and it’s IP67 weather-proof durable design makes it perfect for deployment in enterprise, government, and public environments.

Sky400 Series utilizes an 800mW high power design with 6 external N-Type Antenna Connectors to support 3x3 spatial streams, with 3 connectors for the 2.4GHz band and 3 connectors for the 5GHz band. Sky400 Series’s quality hardware design incorporates a built-in heater with a smart temperature sensor. This heater automatically turns on when the PCB temperature falls below 0°C, making Sky400 Series perfect for low temperature deployment environments. This device is powered through 802.3af/at Power over Ethernet, allowing both power and data to be provided through CAT5 cabling. Sky400 Series supports 4 operation modes: Access Point Mode, WDS Mode, Client Bridge+ Universal Repeater AP Mode, and WISP + Repeater AP Mode.


Sky400 Series only supports 4 operation modes: Access Point Mode, WDS Mode, Client Bridge + Universal Repeater AP Mode, and WISP + Repeater AP Mode. Our software is designed to simplify deployment of wireless devices and reduce costs of device maintenance.

Sky400 Series Software key Features• Operation Modes : AP with WDS Mode, Pure WDS Mode, Client Bridge + Universal Repeater Mode, WISP +

Repeater AP Mode

• Dual Radio Software application supports 2.4Ghz and 5Ghz concurrent Radio WiFi operation support

• 2.4Ghz band supports standard 802.11 bgn protocol with maximum data transfer rate of 450Mbps

• 5Ghz band supports 802.11 an/ac wireless protocol with a maximum data transfer rate of 1300Mbps •

Maximum Security with 802.1x and WAP/WPA2 (Personal and Enterprise)

• Supports 802.11ac/ 11n/ 11an/ 11a wireless standards.

• Supports at total of 32 Multiple-ESSIDs per device (16 ESSID on 2.4Ghz and 16 ESSID on 5Ghz)

• Supports IAPP and IEEE802.11r and IEEE802.11k Fast Roaming

• Supports x8 WDS per Radio (2.4Ghz band WDS x8 and 5Ghz band WDSx8 )

• Supports Band steering technology which detects dual-band capable clients, and directs these clients to the

less saturated 5Ghz network.

• Integrated IGMP v1/v2/v3 snooping functions and Support Web management and SNMP MIB-II

• Supports IEEE802.1d Spanning Tree

• Ping Watchdog function support

• Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash

• Software UI supports Auto reboot setting function. Software setting allows automatically reboot by Daily/

Weekly/Monthly settings

• Auto Channel Scan and supports scanning other AP sites to survey information

• Support Web management and SNMP MIB-II and CLI via Telnet and the SSH interface Management function

• Provide Traffic Monitor and Graphical GUI Status Interface


Sky400 Series Software Specifications

Wireless Feature

• Wireless Dual-Band capabilities, operating in both 2.4Ghz and 5Ghz band frequencies • 2.4Ghz band supports standard 802.11 bgn protocol with maximum data transfer rate of 450Mbps • 5Ghz band supports 802.11 an/ac wireless protocol with a maximum data transfer rate of 1300Mbps • Transmission power control: Layer 1~9 • Supports new IEEE802.11r and IEEE802.11k Fast Roaming. This standard allows APs to link and communicate

before the client roams to the subsequent AP, this is called “Fast Transition” • WDS (Wireless Distribution Service) AP Mode can support a maximum of 16 links per device • Supports Band steering technology which detects dual-band capable clients, and directs these clients to the

less saturated 5Ghz network.• Channel Bandwidth setting : 20MHz, 20/40MHz, or 80MHz • HT Tx/Rx Stream selection : 1, 2, or 3 • Channel selection : Manual or Auto • Max number of associated clients per frequency band : 64• IEEE 802.11d -Multi country roaming • Supports packet transmission time control through Slot Time and ACK Timeout interval control functions • Supports Beacon Interval and performance control DTIM Interval for client power efficiency


Authentication/Encryption (Wireless Security)

• Blocks client to client discovery within a specified VLAN • WEP 64/128 bit /EAP-TLS + Dynamic WEP , EAP-TTLS + Dynamic WEP, PEAP/MSPEAP + Dynamic WEP • WPA-PSK/TKIP,WPA-802.1x/TKIP, 802.11i WPA2-PSK/CCMP/AES 128/256bit, WPA2 (802.1x /CCMP / AES128/256bit), No. of registered RADIUS servers: 1 • Setting for TKIP/CCMP/AES 128/256bit (ASCII 63 & HEX 64 )key’s refreshing period • SSID Visibility support to display or hide ESSIDs, and VLAN assignment on ESSID • Access Control list (ACL) by MAC Address • Client Isolation and Client Connection limitations.

Quality of Service

• Support IEEE802.11e WMM • DiffServ/TOS , COS, IEEE 802.1Q Tag VLAN priority control

Network / Management

• Supports IEEE.802.1Q VLAN Tag • Supports IEEE802.1d Spanning Tree Protocol • Repeater AP/ WISP Mode supports Static IP, Dynamic IP(DHCP

Client), PPTP, and PPPoE on WiFi WAN

Connection

• Web-Based management interface, Intuitive Web Management Interface • Administrative Access (Supports 2 accounts): HTTP and HTTPS and support CLI access via Telnet and SSH • Support Firmware Upgrade via Web , Reset to Factory Defaults • Support SNMP v1/v2c/v3 , MIB II. Also supports Traps to a list of IP addresses • Support Event log

Sky400 Series Hardware Key Features

• 2.4Ghz Data Rate of up to 450Mbps(Tx), 450Mbps(Rx) link rate • 5Ghz Data Rate of up to 1300Mbps for 80MHz channel bandwidth • 800mW at 2.4Ghz and 500mW at 5Ghz Output eXtreme High Power design • External for 2.4Ghz 3x3 and 5Ghz 3x3 N-Type Connector design (IEEE 802.11ac and 11nbg 3Tx/3Rx Design) • IEEE 802.3af/at Power over Ethernet (48V) support • Supports PoE Bridge function to allow power to be passed on to subsequent 802.3af/at PoE devices • Built-in heater with temperature sensor • Integrates a long-range power amplifier and high sensitivity receiver to deliver unmatched reliability and

performance at large coverage application • Weather-proof Housing (IP67 Approved)• Built-in lightning arrester (15kV ESD) • Supports Hardware chipset base Watch Time Dog, allowing the OS to reboot automatically before a crash


Sky400 Series Hardware Overview

• Includes two Gigabit Ethernet Ports (ETH1 and ETH2)

• LED Display Panel (6 LED Lights) for Status Indication

• 6 N-Type Connectors for external antenna connection (3 for 2.4GHz and 3 for 5GHz)

• 4 Holes for Mounting Bracket • Includes Reset Button in LED Display panel.

Sky400 Series Hardware Application

SkyFidelity’s Sky400 Series’s efficient hardware and 5Ghz main CPU chip can sustain a maximum of 150 simultaneous client connections when utilizing both 2.4Ghz and 5Ghz frequencies (dual band). The client connection limit may fluctuate based on environmental factors. Ideal deployment environments for Sky400 Series include enterprise, university campuses, government projects, public venues, and WISP application. The hardware’s built-in heater is designed to automatically turn on once PCB temperatures drop below 0°C, making Sky400 Series the perfect device for cold weather deployment.

SkyFidelity’s product design of Sky400 Series’s PoE power hardware makes the device extremely suitable for outdoor environment architectures. The simplicity of powering Sky400 Series and other 802.3af/at PoE standard devices enables ease of deployment and management.


PoE Bridge application

SkyFidelity’s product design of Sky400 Series PoE power hardware makes the device extremely suitable for medium-sized multi-PoE AP environment architectures. The simplicity of powering Sky400 Series and other 802.3af/at PoE standard devices enables ease of deployment and management. Sky400 Series’s PoE Bridge function easily provides power to additional PoE devices such as AP and IP Cameras, allowing for simple structure of a network environment.

Use Mounting Bracket Easy Pole Mount and Wall Mount Installation

SkyFidelity’s Sky400 Series’s supports both Pole and Wall Mounting. Using the provided mounting bracket, users can deploy Sky400 Series in a wide range of outdoor environments.

Pole Mount Wall Mount

Sky400 Series Dimensions (mm)


Sky400 Series HardwareSpecifications

Application Software

OS System Compatible edition SkyFidelity CenOS 4.0 / 5.0 Software Core

Specifications

Network Standards Conformance IEEE 802.11 b/g/n/ac compliant IEEE 802.3 / IEEE 802.3u IEEE 802.11 b/g/n compliant IEEE802.3af/at Power Over Ethernet compliant IEEE 802.11Q VLAN IEEE802.11r/IEEE802.11k Fast Roaming IEEE802.11e WMM

Ethernet Configuration 0/100/1000BASE-TX Auto MDI/MDI-X Ethernet Connector x 2 (Power over Ethernet 802.3.af/at PoE in )

LED Indicators PWR (Power) LED x 1 ETH1 (PoE In) LED x 1 ETH2 (PoE Bridge) LED x 1 Heater LED x1 Signal LED x2

Wireless Specifications

Data Transfer Rate IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing) IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps (auto sensing) IEEE802.11n: 450Mbps (at 40MHz), 216Mbps (at 20MHz) IEEE802.11ac:, 1300Mbps (at 80MHz) 600Mbps (at 40MHz) 260Mbps(at 20MHz)

Frequency Range IEEE802.11nbg : 2.412 ~ 2.462GHz (USA) 2.412 ~ 2.484GHz (Japan) 2.412 ~ 2.472GHz (Europe ETSI) 2.457 ~ 2.462 GHz (Spain) 2.457 ~ 2.472 GHz (France) IEEE802.11a/an/11ac : 5.150 – 5.350 & 5.725 – 5.825 GHz(USA) 4.900 – 5.250 GHz(Japan) 5.150 – 5.350 & 5.470 – 5.725GHz (Europe ETSI)


Channel Spacing IEEE802.11b/g/n : 20/40MHz IEEE802.11ac: 20/40/80MHz

Media Access Protocol CSMA / CA with ACK

Modulation Method IEEE802.11b:DSSS (DBPK,DQPSK,CCK) IEEE802.11a/g/n:OFDM(64-QAM,16-QAM,QPSK,BPSK) IEEE802.11ac : OFDM ( QPSK,BPSK)

Operating Channels 802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France IEEE 802.11an/ac @ 5GHz : US : 12 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161) Japan : 4 (CH: 34, 38, 42, 46) ETSI : 19 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140)

Transmit Power Variation 2.4Ghz: Max:29±1dBm 5Ghz: Max:27±1dBm

Receiver Sensitivity 2.4Ghz: Max:-92dBm 5Ghz: Max:-92dBm

Environmental & Mechanical Characteristics

Operating Temperature -20 °C ~ 50 °C Storage Temperature -20 °C ~ 60 °C

Operating Humidity 10% - 80% Non-Condensing

Storage Humidity 5% - 90% Non-Condensing

Antenna 6 External N-Type Connectors

Form Factor Supports both Pole Mounting installed using a provided Mounting Bracket.

System Power Consumption 18Watt (Max)

Power Supply Supports Power Over Ethernet ( POE 48~57V voltage) Integragted IEEE 802.3af /at Power over Ethernet (PoE)

Input Power IEEE802.3at 48V~57V PoE In

Dimensions ( W x H x D ) 255 x 255 x 78 mm


Unit Weight TBD

Certifications ROHS compliant ,FCC andCE applying

Package Content

Sky400 Series Main Unit X1

Wall/Pole Mounting Bracket X1

CD Manual X1

Warranty Card X1


Contact us directly to receive SkyFidelity service plans and prices:

Timothy P. PeabodyChief Executive OfficerPhone: [email protected]

Robert BuckDirector of SalesPhone: [email protected]

Shawn SchaperPhone: [email protected]

CORPORATE OFFICE

Sky Fidelity, Inc.5020 Campus Drive

Newport Beach, CA 92660

SALES OFFICE - FLORIDA

Sky Fidelity, Inc.200 Windward Passage, #2Clearwater, Florida 33767

www.SkyFidelityInc.com

Sky400 Series - SkyFidelity, Inc.skyfidelityinc.com/wp-content/uploads/2016/11/Sky400-Series.pdf ·...

Documents

Transcript of Sky400 Series - SkyFidelity, Inc.skyfidelityinc.com/wp-content/uploads/2016/11/Sky400-Series.pdf ·...