SKSCF1801P 18-Inch Integrated Column Freezer-Spec Sheet...15 Amp Plug Type 3-Prong Power Cord Length...
Transcript of SKSCF1801P 18-Inch Integrated Column Freezer-Spec Sheet...15 Amp Plug Type 3-Prong Power Cord Length...
Page 1 of 5 | Effective 7/20 | WCAG
© 2020 Signature Kitchen Suite. All rights reserved. Design, features and specifications are subject to change without notice. Specifications are for planning purposes only. Consult the product’s installation instructions for final dimensional data and other details prior to making cutouts or custom panels. Consult with a heating and ventilation engineer for your specific ventilation requirements. Non-metric weights and measurements are approximate. Smart features require Internet access. 1-855-790-6655 | www.signaturekitchensuite.com
SKSCF1801P18-INCH INTEGRATED COLUMN FREEZER
StyleDoor Style Panel ReadyInterior Cabinet Finish Metal
InnovationWi-Fi-Enabled for ThinQ® Control with iPhone / Android App
Yes
Remote Operations YesInverter Linear Compressor Yes
PerformanceSpeed Freeze YesAdaptive Defrost YesModesSabbath, Ice Plus, Demo, Icemaker On / Off, Power On / Off, Temp Control, Water Filter Reset, Smart Diagnosis, WiFi , Smart GridWater Filter (6 Months) Yes
Capacity and StorageTotal Capacity (cu. ft.) 9.6Storage Shelves 3 Adjustable
w/LED Lighting, 1 Fixed
Lift and Go™ Ice Drawer 1 Soft Close / Self Close
Lift and Go™ Storage Drawers 2 Soft Close / Self Close
Aluminum Framed Lift and Go™ Door Bins with Removable Inserts
4 Adjustable
Removable Ice Bucket Storage Volume 5.5 lbs.
LARGEST CAPACITY COLUMNDesigned to provide the largest capacity in the industry*, the 18-inch Integrated Column Freezer features 9.6 cu. ft. of storage capacity.
SIGNATURE FIT™ INTEGRATED DESIGNEvery integrated column features an intelligent, symmetrical design that allows for flush installation, along with easy door reversal. Also, when installed with a 24-inch or 30-inch Column Refrigerator, the pair cleanly fits a 42"/48" opening or a 41.5"/47.5" opening—perfect for both new construction and replacement applications. (See Integrated Column Planning/Installation Guide for details)
BRILLIANT INTERIORThe glass and metal interior is not only beautiful, it is designed to help the freezer stay at the set temperature by holding and transferring cold fast and efficiently.
DISTINCTIVE ICEThe frustum ice shape gives an air of distinction while the removable clear bin holds up to 5.5 lbs., perfect for entertaining.
ECO FRIENDLYEngineered to reduce environmental impact with HFC / HCFC free refrigerant, insulation and recyclable materials. *Based on survey of comparable products performed March 1, 2020.
Modes Sabbath, Ice Plus, Demo, Icemaker On / Off, Power On / Off, Temp Control, Water Filter Reset, Smart Diagnosis, WiFi , Smart Grid
Page 1 of 5 | Effective 4/20 | WCAG
Page 2 of 5 | Effective 7/20 | WCAG
*These warranties give you specific legal rights and you may have other rights that vary from state to state. For complete warranty details, refer to your Use & Care manual.
SKSCF1801P18-INCH INTEGRATED COLUMN FREEZER
Technical SpecsRequired Power Supply 115 V, 60 Hz,
15 AmpPlug Type 3-ProngPower Cord Length 86 1/2"
Dimensions and WeightOverall Width (inches) 17 1/2"Overall Height (inches) 83 1/2" Min. –
84 1/2" Max.Overall Depth Without Panel or Handles (inches)
23 7/8"
Net Weight (approx.) 304 lbs.Shipping Weight (approx.) 348 lbs.
Optional AccessoriesStainless Steel Panel / Handle / Toekick Kit
SKSPK185CS
Retrofit Frame Kit SKSFK800CSBrushed Aluminum Handle
Medium – 31 11/16" SKSHK310HSLong – 48" (For Columns) SKSHK480HS
Replacement Water Filter LT1000P-S
Warranty Summary*Limited Warranty, Parts & Labor 3 YearsLimited Warranty on Sealed System, Parts and Labor
5 Years
Limited Warranty on Sealed System, Parts Only
10 Years
General FeaturesDigital Controls w/White LED Display YesWater Filter Indicator YesIce Production (24 Hrs.) 3.5 lbs.Ice On / Off YesHidden LED Interior Lighting YesOperating Temperatures -6° to 8° FMaximum Sound Level (dBA) 39 dBA Star-K Certified Sabbath Mode YesENERGY STAR® Certified Yes
Installation FeaturesReversible Door YesFour Point Front Adjustable with 8 Wheels
Yes
Attachment Method to Cabinetry Top with No Visible Screws
Front Serviceable YesAnti-tip Bracket Included YesJoining Kit for Dual Column Installation Included (SKSFJ800P)
Yes
Page 2 of 5
Page 3 of 5 | Effective 7/20 | WCAG
SKSCF1801P18" INTEGRATEDCOLUMN FREEZER
CUTOUT DIMENSIONS – FLUSH INSTALLATION SINGLE COLUMN
INSTALLATION CLEARANCES – FLUSH INSTALLATION
TOP VIEW
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
18" (457 mm) finished width
4"(102 mm)finishedreturn*
25" (635 mm)min. depth
84"(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet exterior is recommended on all sides and the top of the cutout opening. The shaded area will be visible after installation.
*
1 3/8" (35 mm)
CUTOUT DIMENSIONS – RETROFIT INSTALLATION SINGLE COLUMN
17 3/4" (451 mm) finished width
4"(102 mm)finishedreturn*
24" (610 mm)min. depth
84"(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet exterior is recommended on all sides and the top of the cutout opening. The shaded area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished cabinet returns.
*
1 3/8"(35 mm)
1/4"(6 mm)
min.
1/4"
min.(6 mm)
90°
115°
8 3/4"*(223 mm)
25"(635 mm)
19 1/2"(495 mm)
18"
17 3/4"(451 mm)
3/4"(19 mm)**
(457 mm)
INSTALLATION CLEARANCES – FLUSH INSTALLATION WITH TRIM PIECE
TOP VIEW
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
1/8"(3 mm)
min.
1/8"
min.(3 mm)
90°
115°
8 3/4"*(223 mm)
25"(635 mm)
19 1/2"(495 mm)
18"
17 3/4"(451 mm)
3/4"(19 mm)**
(457 mm)
INSTALLATION CLEARANCES – RETROFIT INSTALLATION
TOP VIEW
1/8"(3 mm)
min.
1/8"
min.(3 mm)
90°
115°
8 3/4"*(223 mm)
17 3/4"(451 mm)
24"(610 mm)
20 1/4"(514 mm)
17 3/4"(451 mm)
Optional Frame Kit SKSFK800CS can be installed for a finished look.
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
3/4"(19 mm)**
1 1/4"*(32 mm)
5"(127 mm)electricallocation
4"(102 mm)
water location
5"(127 mm)electricallocation
4"(102 mm)
water location
CUTOUT DIMENSIONS – FLUSH INSTALLATION
Notes
Freezer can be installed flush or proud with 3/4" custom panel or optional stainless steel panel kit.
With a 25" (635 mm) cutout depth, the front face of the freezer fits flush with 25" (635 mm) depth adjacent cabinets.
Electrical
A 115V, 60Hz., 15 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall.Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
Water Line
A cold water supply is required for automatic icemaker operation. Water pressure must be between 20 and 120 p.s.i.
Tubing should be long enough to extend to the front of the freezer. Allow enough tubing to accommodate a bend leading into the water line connection.
Water line can enter an opening through floor or back wall.
Install a shut-off valve between the icemaker water valve and cold water supply in the home.
SINGLE COLUMN
Notes
Door Swing Clearances – The installation must allow for clearances to adjacent walls or cabinets. This freezer is equipped with a 2-position door stop. The factory-set 115° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.
Door Handle Clearances – The Door Handle depth must be added to the dimension noted to determine the total clearances required from adjacent cabinets or walls. This clearance will vary depending on the custom handle used. When using the Stainless Steel Door Panel Kit w/Handle or the Brushed Aluminum Handle (optional accessories), the door handle clearance with door open 115° is 11" (279 mm).
INSTALLATION CLEARANCES – FLUSH INSTALLATION
TOP VIEW
SKSCF1801P18" INTEGRATEDCOLUMN FREEZER
CUTOUT DIMENSIONS – FLUSH INSTALLATION SINGLE COLUMN
INSTALLATION CLEARANCES – FLUSH INSTALLATION
TOP VIEW
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
18" (457 mm) finished width
4"(102 mm)finishedreturn*
25" (635 mm)min. depth
84"(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet exterior is recommended on all sides and the top of the cutout opening. The shaded area will be visible after installation.
*
1 3/8"(35 mm)
CUTOUT DIMENSIONS – RETROFIT INSTALLATION SINGLE COLUMN
17 3/4" (451 mm) finished width
4"(102 mm)finishedreturn*
24" (610 mm)min. depth
84"(2134 mm)
A minimum 4" (102 mm) finished return that matches the cabinet exterior is recommended on all sides and the top of the cutout opening. The shaded area will be visible after installation.
An optional Frame Kit can be used to provide a finished look to unfinished cabinet returns.
*
1 3/8"(35 mm)
1/4"(6 mm)
min.
1/4"
min.(6 mm)
90°
115°
8 3/4"*(223 mm)
25"(635 mm)
19 1/2"(495 mm)
18"
17 3/4"(451 mm)
3/4"(19 mm)**
(457 mm)
INSTALLATION CLEARANCES – FLUSH INSTALLATION WITH TRIM PIECE
TOP VIEW
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
1/8"(3 mm)
min.
1/8"
min.(3 mm)
90°
115°
8 3/4"*(223 mm)
25"(635 mm)
19 1/2"(495 mm)
18"
17 3/4"(451 mm)
3/4"(19 mm)**
(457 mm)
INSTALLATION CLEARANCES – RETROFIT INSTALLATION
TOP VIEW
1/8"(3 mm)
min.
1/8"
min.(3 mm)
90°
115°
8 3/4"*(223 mm)
17 3/4"(451 mm)
24"(610 mm)
20 1/4"(514 mm)
17 3/4"(451 mm)
Optional Frame Kit SKSFK800CS can be installed for a finished look.
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Door handle must be added to this dimension.
*
3/4"(19 mm)**
1 1/4"*(32 mm)
5"(127 mm)electricallocation
4"(102 mm)
water location
5"(127 mm)electricallocation
4"(102 mm)
water location
SKSCF1801P18-INCH INTEGRATED COLUMN FREEZER
CUTOUT DIMENSIONS – FLUSH INSTALLATION SINGLE COLUMN
A minimum 4" (102 mm) finished return that matches the cabinet * exterior is recommended on all sides and the top of the cutout opening. The shaded area will be visible after installation.
Freezer can be installed flush or proud with 3/4" custom panel or optional stainless steel panel kit.
With a 25" (635 mm) cutout depth, the front face of the freezer fits flush with 25" (635 mm) depth adjacent cabinets.
A 115V, 60Hz., 15 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical must be located on rear wall as shown. Note: GFI (ground fault interrupter) is not recommended.
A cold water supply is required for automatic icemaker operation. Water pressure must be between 20 and 120 p.s.i.
Tubing should be long enough to extend to the front of the freezer. Allow enough tubing to accommodate a bend leading into the water line connection.
Water line can enter an opening through floor or back wall.
Install a shut-off valve between the icemaker water valve and cold water supply in the home.
INSTALLATION CLEARANCES – FLUSH INSTALLATION TOP VIEW
* Door handle must be added to this dimension.
** Varies depending on the thickness of the custom cabinet panel. The door panels in the optional Signature Kitchen Suite stainless steel door panel kit are 3/4" (19 mm) thick.
Notes
Door Swing Clearances – The installation must allow for clearances to adjacent walls or cabinets. This freezer is equipped with a 2-position door stop. The factory-set 115° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Door Handle Clearances – The Door Handle depth must be added to the dimension noted to determine the total clearances required from adjacent cabinets or walls. This clearance will vary depending on the custom handle used. When using the Stainless Steel Door Panel Kit w/Handle or the Brushed Aluminum Handle (optional accessories), the door handle clearance with door open 115° is 11" (279 mm).
Page 3 of 5
Page 4 of 5 | Effective 7/20 | WCAG
FRONT VIEW
TOP VIEW DOOR OPEN 90˚
TOP VIEW DOOR OPEN 115˚
17 1/2"(445 mm)
21 7/8"(556 mm)
17 1/2"(445 mm)
17 1/2"
20 1/2"(520 mm)
(445 mm)
OVERALL PRODUCT DIMENSIONS
SKSCF1801P18" INTEGRATEDCOLUMN FREEZER WITHOUT TRIM PIECE
SIDE VIEW
24 3/4"*
22"***
23 7/8"**
(629 mm)
(558 mm)
(607 mm)
4"
5"(127 mm)
(102 mm)
Depth with 3/4" (19 mm) door panelDepth with door (no panel)Unit depth without door
Unit width without door panel
***
***
9" (229 mm)
3/4" (19 mm)
83 1/2"
min.
84 1/2"
(2121 mm)
(2146 mm)81 9/16"
80 9/16"
(2072 mm)
(2046 mm)
max.
min.
max.
FRONT VIEW
17 1/2"(445 mm)
OVERALL PRODUCT DIMENSIONS – MODIFIED FOR RETROFIT INSTALLATION
Unit width without door panel
83 1/2"
min.
84 1/2"
(2121 mm)
(2146 mm)max.
Unit width without door panel
Unit width without door panel
FRONT VIEW
TOP VIEW DOOR OPEN 90˚
TOP VIEW DOOR OPEN 115˚
17 1/2"(445 mm)
21 7/8"(556 mm)
17 1/2"(445 mm)
17 1/2"
20 1/2"(520 mm)
(445 mm)
OVERALL PRODUCT DIMENSIONS
SKSCF1801P18" INTEGRATEDCOLUMN FREEZER WITHOUT TRIM PIECE
SIDE VIEW
24 3/4"*
22"***
23 7/8"**
(629 mm)
(558 mm)
(607 mm)
4"
5"(127 mm)
(102 mm)
Depth with 3/4" (19 mm) door panelDepth with door (no panel)Unit depth without door
Unit width without door panel
***
***
9" (229 mm)
3/4" (19 mm)
83 1/2"
min.
84 1/2"
(2121 mm)
(2146 mm)81 9/16"
80 9/16"
(2072 mm)
(2046 mm)
max.
min.
max.
FRONT VIEW
17 1/2"(445 mm)
OVERALL PRODUCT DIMENSIONS – MODIFIED FOR RETROFIT INSTALLATION
Unit width without door panel
83 1/2"
min.
84 1/2"
(2121 mm)
(2146 mm)max.
Unit width without door panel
Unit width without door panel
OVERALL PRODUCT DIMENSIONS
TOP VIEW
FRONT VIEW
DOOR OPEN 90°
SIDE VIEW
DOOR OPEN 115°
SKSCF1801P18-INCH INTEGRATED COLUMN FREEZER
OVERALL PRODUCT DIMENSIONS
FRONT VIEW SIDE VIEW
* Depth with 3/4" (19 mm) door panel
** Depth with door (no panel) *** Unit depth without door
TOP VIEW
DOOR OPEN 90°
Unit width without door panel
DOOR OPEN 115°
Unit width without door panel
Page 4 of 5
Page 5 of 5 | Effective 7/20 | WCAG
OPTIONAL ACCESSORIES
CUSTOM PANEL DIMENSIONS
CUSTOM PANEL DIMENSIONS – FLUSH INSTALLATION
SKSCF1801P18" INTEGRATEDCOLUMN FREEZER
Door PanelDoor Panel
DUAL 18" AND 24" COLUMN
41 3/4" (1060 mm)
(603 mm)23 3/4"
79 7/8"(2029 mm)
(451 mm)17 3/4"
4" (102 mm) 4" (102 mm) 4" (102 mm)
Door Panel
(451 mm)17 3/4"
47 3/4" (1213 mm)
DUAL 18" AND 30" COLUMN
79 7/8"(2029 mm)
(756 mm)29 3/4"
Door Panel 79 7/8"(2029 mm)Door Panel
(451 mm)17 3/4"
Notes
These units are designed to be customized with decorative panels. Field-installed custom door panels or an optional Stainless Steel Panel Kit is required.
For Custom Panels: Use templates provided with units to pre-drill holes for mounting panel brackets (provided with unit). Adjustment screws and instructions also provided with units.
Maximum Total Door Panel Weights: 30-Inch Integrated Column – 64 lbs.24-Inch Integrated Column – 53 lbs.18-Inch Integrated Column – 44 lbs
Design Tips
4" (102 mm) will be visible on the interior sides of the furniture return. It is recommended that both sides of each cutout panel be finished to match the cabinet exterior.
If using custom panels, a custom toe kick is required. The bottom of case is unfinished.
Door Handles: Handles are not included with the units. Custom handles are required for installation. Brushed Aluminum Handles are available as an optional accessory.
SKSPK185CS – Stainless Steel Panel Kit for 18-inch Integrated Column Freezer
This unit can be installed with an optional Stainless Steel Panel Kit. Kit includes one door panel, one toe kick and one handle. This kit is reversible and can be used in both Right Hand and Left Hand door swing installations.
Handles for Use With Custom Panels
SKSHK310HS – 31 11/16" (805 mm) Medium Handle – Brushed Aluminum
SKSHK480HS – 48" (1219 mm) Long Handle – Brushed Aluminum
Refer to the Integrated Column Planning/Installation Guide for details on installing multiple columns, door swing dimensions, cabinet planning, retrofit installation and more.
SKSCF1801P18-INCH INTEGRATEDCOLUMN FREEZER
OPTIONAL ACCESSORIES
SKSCF1801P18-INCH INTEGRATED COLUMN FREEZER
CUSTOM PANEL DIMENSIONS
Notes
These units are designed to be customized with decorative panels. Field-installed custom door panels or an optional Stainless Steel Panel Kit is required. For Custom Panels: Use templates provided with units to pre-drill holes for mounting panel brackets (provided with unit). Adjustment screws and instructions also provided with units. Maximum Total Door Panel Weights: 30-Inch Integrated Column - 64 Ibs.
24-Inch Integrated Column-53 Ibs.
18-Inch Integrated Column – 44 lbs
Design Tips
4" (102 mm) will be visible on the interior sides of the furniture return. It is recommended that both sides of each cutout panel be finished to match the cabinet exterior. If using custom panels, a custom toe kick is required. The bottom of case is unfinished.
Door Handles: Handles are not included with the units. Custom handles are required for installation. Brushed Aluminum Handles are available as an optional accessory.
OPTIONAL ACCESSORIES
SKSPK185CS – Stainless Steel Panel Kit for 18-inch Integrated Column Freezer
This unit can be installed with an optional Stainless Steel Panel Kit. Kit includes one door panel, one toe kick and one handle. This kit is reversible and can be used in both Right Hand and Left Hand door swing installations. Handles for Use With Custom Panels
SKSHK310HS – 31 11/16" (805 mm) Medium Handle – Brushed Aluminum
SKSHK480HS – 48" (1219 mm) Long Handle – Brushed Aluminum
Refer to the Integrated Column Planning/Installation Guide for details on installing multiple columns, door swing dimensions, cabinet planning, retrofit installation and more.
Page 5 of 5