SKO Day 1 - Exclusive Networks
Transcript of SKO Day 1 - Exclusive Networks
TechBuzz
Wi-Fi Best Practices
© Aerohive Networks, Proprietary & Confidential
Gianluca Silvestri – System Engineer, Exclusive Networks
© 2014 Aerohive Networks © 2014 Aerohive Networks
Introduction to the course
Short
Simple
Easy to follow
There are always exceptions to the rule
2
© 2014 Aerohive Networks
Pattern Comparison
3
More horizontal coverage
Mo
re d
ow
nw
ard
s v
ertic
al c
ov
era
ge
© 2014 Aerohive Networks
Basic AP placements: walls
14*adjust according to channel width.
ch 36
ch 36
ch 36
ch 48
© 2014 Aerohive Networks
Multiple room coverage
18
The combination of Omni antennas and low wall
attenuation is a sure way to trigger CCI.
© 2014 Aerohive Networks
High Density
19
AP in a room is tricky, high risk/high reward deployment. To make it work it
is necessary to:
• Ensure the environment supports it (high attenuation walls).
• Limit the Tx power of the AP just enough to serve in-room clients.
• Use APs with integrated antennas or external directional antennas.
• Use 20 MHz channels and separate the neighboring channels as much
as possible.
• Disable lower data rates
© 2014 Aerohive Networks
Channel width on 5GHz - 40MHz
21
Ch36 Up
(36+40)
Ch48 Down
(48+44)
Ch149 Up
(149+153)
© 2014 Aerohive Networks
Using DFS channels
23
Do’s
High density indoor environments
like:
• Lecture halls
• Conference centers
• Schools
• Hotels
Primary use is DATA
Don’ts
Mission critical deployments with real time applications like Voice and Video in Hospitals, Logistics,
Manufacturing, etc.
Always avoid it near the helipads, airports, marinas, etc., where there are weather radars present.
Thank [email protected]