Skills CCNA2
Transcript of Skills CCNA2
Downloaderouting-skill-exam-ccna-2.pkt file
A. THEABCORGANIZATIONHAS3 SITESIN HOANKIEM,BAVI ANDHOTAYDISTRICTS.YOU
HAVETO PERFORMTHE TASKS:
1. All routers and PCs are assigned the correct IP Address scheme.
2. All PCs can connected to the web server google.com in the Internet.
3. All 5 PCs can communicate each others.
B. PERFORMINGTHETASKSFOLLOWTHIS PARAMETERSANDCONFIGURATION:
1. Basic configuration:
Overall requirements: all network segments in the network diagram can connect
to each other (example: ping and traceroute work for to reach all devices and
PCs); users can telnet to get access to router CLI.
Router name
IP addressand subnetmask
Clockrate:64000
Password
The console, AUX, VTY lines are protected by clear text password
(Unencrypted), password=”cisco”.
Set the enable password to enter privileged mode,
password=”cisco”.
Set the secret password to enter privileged mode,
password=”class”.
• MOTDBannerand descriptions
MOTD Banner contains the name of the student who configures it.
Example: “Hello, this is Ho Tay R1, configured by Nguyen Van A” .
Description of interface contains the name of the device it connects
to. Example:“Connect to router Ba Vi” .
• PCs:Set the PC’s IP addresses, subnet masks, and default gateways.
2. Routing:
• R1 and R2 share the routing information using RIPv2 .
• R4 and R5 share the routing information using EIGRP 99 (configure
Network command with wildcard mask).
• R2, R5 and R6 share the routing information using OSPF 1 area 0 .
Using Authentication type MD5 with keyID 178 , key
string cisco178 .
In the multi-access network:
R6 is DR (priority 6)
R5 is BDR (priority 5)
R2 is DROther (priority 1)
• Between RIPv2, EIGRP and OSPF areas configure redistribute where
necessary with the metric.
• To RIPv2: metric 5.
• To EIGRP: bandwidth 1544, delay 20000, reliability 255, load 1,
MTU 1500.
• All routers have default route to the Internet.
• R6 share to all routers a summary route to the extended LANs, that it can
connect via interface FastEthernet 0/1.
2. IP Address:
• RIPv2 area: 147.65.X.0/24
• OSPF 1 area: 178.204.X.0/24
• EIGRP 99 area: 160.99.X.0/24
Note:
• X value is map to Switch ID
• Subnetwork between routers R1, R2: X=12
• Subnetwork between routers R4, R5: X=45
• Multi-access network between R2, R5, R6: X=3
• Router’ Interface are assigned IP address with the 4th octet is
RouterID. For Example: interface S0/0/0 of router HoTay_R5 has ip
address: 160.99.45.5 where 3rd octet X=45, 4th octet=5 (on R5).
• PCs have IP address with the 4th octet is 50. For Example: PC4:
160.99.4.50
3. Copy all router configuration to TFTP server using default file config name
Note:
• To pass this exam, student have to correct all connectivity tests and have
more than 70 points
• To see connectivity test -> Check results -> Connectivity test
Router BaVi_R1
(config)#router rip
(config-router)#version 2
(config-router)#no auto-summary
(config-router)#network 147.65.1.0
(config-router)#network 147.65.12.0
Router BaVi_R2
(config)#router rip
(config-router)#version 2
(config-router)#no auto-summary
(config-router)#network 147.65.2.0
(config-router)#network 147.65.12.0
(config-router)#redistribute ospf 1
(config)#router ospf 1
(config-router)#network 178.204.3.0 0.0.0.255 area 0
(config-router)#redistribute rip metric 5 subnets
(config)#interface fa0/0
(config-if)#ip ospf priority 1
(config-if)#ip ospf authentication message-digest
(config-if)#ip ospf message-digest-key 178 md5 cisco178
Router HoTay_R4
(config)#router eigrp 99
(config-router)#network 160.99.4.0 0.0.0.255
(config-router)#network 160.99.45.0 0.0.0.255
Router HoTay_R5
(config)#router eigrp 99
(config-router)#network 160.99.5.0 0.0.0.255
(config-router)#network 160.99.45.0 0.0.0.255
(config-router)#redistribute ospf 1 metric 1544 20000 255 1 1500
(config)#interface fa0/0
(config)#router ospf 1
(config-router)#network 178.204.3.2 0.0.0.255 area 0
(config-router)#redistribute eigrp 99 subnets
(config)#interface fa0/0
(config-if)#ip ospf priority 5
(config-if)#ip ospf authentication message-digest
(config-if)#ip ospf message-digest-key 178 md5 cisco178
Router HoanKiem_R6
(config)#ip route 0.0.0.0 0.0.0.0 s0/0/0
(config)#ip route 172.0.0.0 255.128.0.0 fa0/1
(config)#router ospf 1
(config-router)#network 178.204.3.0 0.0.0.255 area 0
(config-router)#network 178.204.6.0 0.0.0.255 area 0
(config-router)#redistribute static subnets
(config-router)#default-information originate
(config)#interface fa0/0
(config-if)#ip ospf priority 6
(config-if)#ip ospf authentication message-digest
(config-if)#ip ospf message-digest-key 178 md5 cisco178