Sivaraj_RESUME
Transcript of Sivaraj_RESUME
RESUME
SIVARAJ S
9/129, Muthumangalam,
Velampalayam,
Kangeyam (Tk),
Tirupur (Dt),
Tamil Nadu, E-mail id : [email protected]
India-638105. Phone : +91-8056571872
Career Objective:
To co-ordinate with the team to complete the task in an efficient manner and constantly upgrade
my knowledge, skills to do my best for the organization.
Area Of Interest:
Vehicle Dynamics
Bus Body Code (AIS-052)
Vehicle Frames and Suspension System
Computer Aided Modeling and Drafting
Testing and Homologation.
Software Skills:
Solidworks 2015
CATIA V5 R18
Auto Cad 2015
ANSYS Multi-physics
Professional Experience:
1) Designation : Intern (Design Engineer)
Company name : M/s Actualize Consulting Engineers (India) Pvt. Ltd., Bangalore.
Experience : From March 2016 to July 2016
Project : Enclosed Guillotine
Client : Fouress Engineering India Pvt Ltd, Bangalore.
Environment : SOILDWORKS
Roles and Responsibility:
Performed manual calculation as per customer specific requirements.
Identifying the possible alteration of dimensions in the existing component models.
Modeling and assembling based on the design intents and production feasibility.
Assigned parametric relations to alter the dimensions if required in the future.
Created manufacturing drawings with welding symbols according to the Fouress
standards.
Other Activities:
Given knowledge sharing seminar on Bus Body Code AIS-052 and other AIS Standards
(Rollover test, Mirror installation, Horn installation, Light and light signaling device, etc )
which are used for Bus Body Building.
2) Designation : Trainee (Product Development)
Company Name : M/s Volvo Buses India Private Limited, Bangalore.
Experience : From Jan 2016 - June 2016
Project : Design of Collapsible Footsteps for an emergency exit door
Environment : SOILDWORKS, ANSYS
Roles and Responsibility:
Modeling and assembling of the new Collapsible footstep as per the bus body code
AIS-052.
Mechanism of the system is simulated for accessing the system from both inside and
outside of the bus.
Various possible alterations were made on assembly to get better design.
Selection of material for the designed components.
Analyzed structural strength of the system using ANSYS software.
Other Responsibilities: Bench marking of different vehicle dimensions as per the Bus Body Code AIS-052
Dimension Verification for the new vehicle prototype and assign demerit points.
3) Designation : Trainee (Testing and Homologation)
Company Name : M/s Central Institute of Road Transport, Pune.
Experience : From July 2015 - December 2015
Roles and Responsibility:
Testing of buses as per the bus body code AIS-052 for type approval.
Vehicle overall dimension, seating layout, windows, doors, emergency exit, gangway,
luggage racks, etc.
Rollover testing of bus body super structure as per the AIS-031.
Testing of windscreen wiper, horn installation, light and light signaling device
installation, mirror installation, window retention, etc,.
Testing of auto components like tire, tubes, fuel tank, brake liner, oil seal, ball joint, oil
filter, fan belt, etc as per the Indian Standards, ASRTU and other standards.
Academic Profile:
Academic Project:
FINITE ELEMENT ANALYSIS AND OPTIMIZATION OF AUTOMOBILE
STEERING KNUCKLE.
Description: Objective of the project is to increase the strength and reduce the weight of
Steering Knuckle by Material and Geometric optimization.
Course Name of the Institution University/Board Percentage
/CGPA
Year of
passing
M.Tech Automobile
Engineering (Vehicle
Engineering & Transport
Management)
Vel Tech Dr.RR & Dr.SR Technical
University (In collaboration with
Central Institute of Road Transport,
Pune)
Vel Tech University
8.14
2016
B.E
Automobile
Engineering
Dr. Mahalingam College of
Engineering and Technology,
Pollachi
Anna University 7.21 2014
HSC KKP Matriculation Higher
Secondary School, Muthur State Board 91.91 2010
SSLC KKP Matriculation Higher
Secondary School, Muthur State Board 89.8 2008
MULTI-AXIAL FORCE ACTING ON STEERING KNUCKLE.
Description: Objective of the project is to find the reaction force acting on knuckle during
different riding condition.
INTERNATIONAL STUDENTS GREEN CAR COMPETATION.
ROLE: Designed the Suspension system and Wheel Assembly for INTERNATIONAL
STUDENTS GREEN CAR COMPETATION (ISGCC 2015) conducted by Korean
Automobile Testing & Research Institute (KATRI), South Korea.
SAE BAJA.
ROLE: Deigned the Frame for SAEBAJA-2014 conducted by SAE INDIA.
SAE EFFICYCLE.
ROLE: Designed the Frame and Suspension system for SAE Efficycle 2012 conducted by
SAE INDIA Northern Section.
In Plant Training:
Undergone in-plant training at Tamil Nadu State Transport Corporation (TNSTC) – R.C
UNIT, Chitode for a week.
Awards & Achievements:
Secured “BEST HYBRID DRIVE AWARD” in EFFICYCLE 2012 conducted by SAE
INDIA.
Secured “BEST CREATIVE TECHNOLOGY PRIZE” in INTERNATIONAL
STUDENTS GREEN CAR COMPETATION (ISGCC 2015) conducted by Korean
Automobile Testing & Research Institute (KATRI), South Korea.
Extra Curricular Activities:
Represented the college Basketball team for zonal level meet for the three consecutive
academic years 2011-2014.
Personal Details:
Gender : Male
Father’s Name : Subramanian C
Mother’s Name : Mageshwari S
Date of Birth :11th October, 1992
Hobbies : Numismatic, Fishing
Languages Proficiency : English, Tamil
Declaration:
I hereby declare that the above furnished details are true to the best of my knowledge.
Date :
Place : Sivaraj .S