SISTEMAS VS TECHNICAL CATALOG -...

SISTEMAS VS

TECHNICAL CATALOG

LAMMAS s.r.l.

Strada Castellamonte-Bairo 1/A10010 Bairo (TO) Italy.

Tel: +390124501266Fax: +390124501047

Email: [email protected]

Website: www.lammas.it

mailto:[email protected]

http://www.lammas.it/IT/

2

GENERAL CLAUSES

While every effort has been made to ensure the accuracy and completeness of the informationcontained in this document, the possibility of errors or omissions in data or technicalspecifications cannot be entirely excluded. The specifications or data in this document aretherefore subject to change without prior notice, in which case the manual will be updated.

If you have any questions or notice any inaccuracies, please contact our office:

Strada Provinciale Castellamonte 1/A

10100 Bairo Canavese (TO) Italy

Telephone +39.0124.501266 / 501047

Fax +39.0124.501326

E-mail: [email protected]


This manual contains information of a strictly technical nature that is the property of LammasS.r.l.. No part of this document may be reproduced, disclosed or modified without the owner'swritten authorisation. All rights reserved by Lammas S.r.l.

Release 1 - Review 07-2018

STANDARD groups technical catalog:

SISTEMAS VS

3

DESCRIPTION CHAPTER PAGE

LINE MODULES 1 6 ÷ 11

PALLET 2 12 ÷ 15

SHOCK ABSORBERS 3 16

CHAIN TIGHTENER HEADS 4 17 ÷ 20

MOTORIZED HEADS 5 21 ÷ 28

GEARMOTORS 6 29

SPACERS 7 30 ÷ 34

TRANSFER UNITS APPLICATIONS 8 35

TRANSFER UNITS APPLICATIONS 9 36 ÷ 39

MANUAL WORKING STATIONS 10 40

INDEX PALLET UNITS 11 41 ÷ 42

ROTARY TABLES UNITS 12 43 ÷ 45

LINE SUPPORTS 13 46 ÷ 47

STOP UNITS 14 48 ÷ 50

ACCESSORIES 15 51 ÷ 65

TYPES OF CHAINS 16 66 ÷ 68

FOR CAD FILES ASK TOwww.lammas.it

4

DESCRIPTIONGROUP CODE J XXX

VS1 or

VS2YYY

LINE MODULES 700 XXXXX / → Tab.1

PALLET 718 J00 /

DECELERATORS 760 0700 XX VS /

CHAIN TIGHTENER HEADS 702 /

MOTORIZED HEADS 702 → Tab.2

GEARMOTORS 703 JJ 1 Z 90 → Tab.2

SPACERS 716 KXX /

TRANSFER UNITS 706 → Tab.3

MANUAL WORKING STATIONS 712 S03

INDEX PALLET UNITS 712 → Tab.3

ROTARY TABLES UNITS 712 → Tab.3

SINGLE LINE SUPPORTS 720 Z00

FUNCTION

CODE DEFINITION YYYReferring to tables page 5

VS1 – CHAIN 5/8’’VS2 – CHAIN 3/4’’

STANDARD CODIFICATION SISTEMAS VSCOMMERCIAL CODE COMPOSITION

CODE J REFERRING TOTYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

TAB.3 CYLINDER DEFINITIONValid for:- TRANSFER UNITS- INDEX PALLET UNITS- ROTARY TABLES UNITS

YYY CYLINDER

FST FESTO

FKP FESTO with Clamping unit

SMC SMC

SKP SMC with Clamping unit

S16 LAMMAS

TAB.4 FEET DEFINITION

Valid for:- ALL TYPE OF LINE SUPPORTS

YYY FEET

Z00 ZINCATO

TAB.1 CHAIN DEFINITION FOR HEAVY LINE (VS1)Valid for LINE MODULES:

YYY CHAIN 5/8’’ ONLY FOR VS1 LINE

DDR DOUBLE IDLE

DSP DOUBLE SILENT CHAIN

STANDAR CODIFICATION SISTEMAS VSDEFINITION TABLES CODES

TAB.2 GEARMOTOR DEFINITION

Valid for MOTORIZED HEAD

YYY GEARMOTOR

BNF BONFIGLIOLI

SEW SEW - EURODRIVE

TAB.1 CHAIN DEFINITION FOR HEAVY LINE (VS2)Valid for LINE MODULES:

YYY CHAIN 3/4’’ ONLY FOR VS2 LINE

FLR FLYING ROLLER 3/4’’ (Ø 28)

FMP FLYING ROLLER MAGLIE PIANE

FIP FLYING ROLLER (With cover accident prevention)

SISTEMAS VS1LINE MODULE SECTION AND COMPOSING ELEMENTS

6 CHAPTER 1

THE VS1 LINE MODULE IS MADE BY:1) Aluminium profiles with hardened steel guides2) Top cover3) Chain4) Nut

VS1 architecture is based on a load bearing structure of rigid and compact extruded aluminum. It

incorporates the hardened chain guides and the pallet containment guides, and functions ascontainment for all the accessory mechanical groups. The line is sustained by adjustable supportswith a maximum capacity of 1500 kg/m.

POLYDUR GUIDESCod. 006312003Available in meters

HARDENED STEEL GUIDESCod. 770224004Lenght 1,5 meters

Sistemas VS1 is suitable for:1) Modules lenght up to 6 meters2) High speed pallet transfer3) Load capacity up to 4,5 ton for each module

SISTEMAS VS2LINE MODULE SECTION AND COMPOSING ELEMENTS

7 CHAPTER 1

THE VS2 LINE MODULE IS MADE BY:1) Aluminium profiles with hardened steel guides2) Chain cover3) Chain 4) Intramodular nuts

VS2 architecture is based on a load bearing structure of rigid and compact extruded aluminum. It

incorporates the hardened chain guides and the pallet containment guides, and functions ascontainment for all the accessory mechanical groups. The line is sustained by adjustable supportswith a maximum capacity of 1500 kg/m.

POLYDUR GUIDESCod. 006312003Available in meters

HARDENED STEEL GUIDESCod. 770224004 Lenght 1,5 meters

3

12

4

Sistemas VS2 is suitable for:1) Modules lenght up to 20 meters2) Speed pallet up to 12 m/1’3) Composing the automated warehouse

VS1LINE COMPOSITION

8 CHAPTER 1

1 LINE MODULE2 COVER LINE3 CHAIN TIGHTENER HEAD4 MOTORIZED HEAD5 SUPPORT LINE6 DISTANZIALE 7 SHOCK ABSORBER 8 PALLET PLATE9 GEARMOTOR

VS1 LINE COMPOSITION:

VS2LINE COMPOSITION

9 CHAPTER 1

1 LINE MODULE2 CHAIN TIGHTENER HEAD3 MOTORIZED HEAD4 SUPPORT LINE5 SPACER 6 SHOCK ABSORBER 7 PALLET PLATE8 GEARMOTOR

VS2 LINE COMPOSITION:

1

2

3

5

4

5

6

7

8

SISTEMAS VS 600/800/900/1000LINE SECTION

10 CHAPTER 1

LINE VS2 QUOTE A

VS2 600 468

VS2 800 668

VS2 900 768

VS2 1000 868

LINE VS1 QUOTE A

VS1 600 515

VS1 800 715

VS1 900 815

VS1 1000 915

VS1 LINE SECTION:

VS2 LINE SECTION:

Slinding pallet plate


* OTHER DIMENSIONES

AVAILABLE ON DEMAND

A *

*

* OTHER DIMENSIONES

AVAILABLE ON DEMAND

SISTEMAS VSLINE MODULE

ORDERING CODES

11

CODE

700 J XXXXX YYY

CHAPTER 1

LINE KIND

MODULE LENGHT (m)

CHAIN KIND

700 J XXXXX YYY

700 00500

00700

01000

01500

02000

02500

03000

03500

04000

04500

05000

05500

06000

USED ONLY FOR VS2 LINE

06500

07000

07500

08000

08500

09000

09500

10000

10500

11000

15000

12000

UNTIL 20000

YYY CHAIN KIND FOR VS1 LINE:

DDR DOUBLE IDLE

DSP DOUBLE SILENT CHAIN

CODE J REFERRING TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

XXXXX = Module length (mm)Example: 700 9 01000 DDR FOR VS1 LINEExample: 700 9 01000 FLR FOR VS2 LINELine module 1000 length 1000 mm VS1 or VS2

VS1 VS2

YYY CHAIN KIND FOR VS2 LINE:

FLR FLYING ROLLER 3/4’’ (Ø 28)

FMP FLYING ROLLER MAGLIE PIANE

FLD FLYING ROLLER (Idle made of derlin)

FIPFLYING ROLLER (With cover accidentprevention)

KIND OF CHAIN CHAPTER 16

SISTEMAS VSSTANDARD PALLET

ORDERING CODES AND TECHNICAL DIMENSIONAL DETAILS

12

CODE

718 J00 VSZ

CHAPTER 2

NOTE:REFER TO LAMMAS TECHNICAL DEPT.:•FOR DIMENSIONAL DETAILS OF PALLETS IN PRESENCE OF INTEGRATED STOP.•TO DOWNLOAD .DWG/STEP FILES.

LINE KINDPALLET

WEIGHT (Kg)

QUOTE (mm)

A B C D

600 LINE 47 Kg 370 557 596 17

800 LINE 85 Kg 470 757 796 17

900 LINE 110 Kg 470 857 896 17

1000 LINE 155 Kg 580 957 996 20

Z LINE KIND:

1 VS1 LINE

2 VS2 LINE

CODE J REFERRINGTO

TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

NOTE: Lammas can customize rectangular pallets with standardexternal dimensions


TECHNICAL DIMENSIONAL DETAILS

13 CHAPTER 2

EXTERNAL STOP

On the upper side all pallet have to befree wide from obstructions, all over the10 mm area highlightedin order to not compromise the correctworking of the external stop.

On the lower side do not execute machinig along the axes.These machinig compromise the correct working of the stopper.



14 CHAPTER 2

EXTERNAL STOP

DUMPER UNIT

Minimal quote if assembly of dumper unit is needed.

The perimeter of pallet must be free from equipment for 10 mm at least.

Minimum height quote for the correct functioning of the line in case of addition of overplates, dumper unitor equipments.No kind of mechanical equipment has to be mountedbelow the highlighted measure in order to avoidcollisions with the external stop.

If pallet accumulation occurs, the use of dumpers avoids:1) Extreme noise due to pallet bump;2) Undue stress on stop units;3) Crushing danger with heavy loads



15 CHAPTER 2

If the addition of equipment or overplates is needednote that they must be above the pallet for 1,5 mm atleast, to avoid any malfunction of the stop unit.

Do not assembly any equipment on the notchs located on the axes to avoid anyfurther malfunctioning of the stop.

SISTEMAS VSSHOCK ABSORBERS

ORDERING CODE

16

CODE

760 0700 XX VS

CHAPTER 3

NOTE: FOLLOWING THE SCHEME BELOW, CHOOSE THE MOST SUITABLE DAMPER UNIT ACCORDING TO - THE PALLET WEIGHT [KG] (LOADED/EMPTY) - THE CONVEYOR SPEED [MT/MIN].

SISTEMAS VS1CHAIN TIGHTENER HEAD

ORDERING CODE

17

CODE

702 J XXX VS1

CHAPTER 4

In line

Head

410

420

CODE XXX REFERRING TO CHAIN TIGHTENER TYPE:

XXX KIND

410 IN LINE

420 HEAD

430 PERPENDICULAR

LINE QUOTE A

600 663

800 863

900 963

1000 1063

ASSEMBLY COVER HEADCod: 760 636 001 S03 FOR 600 VS1 LINECod: 760 736 001 S03 FOR 800 VS1 LINECod: 760 836 001 S03 FOR 900 VS1 LINECod: 760 936 001 S03 FOR 1000 VS1 LINE


LINE J

600 6

800 7

900 8

1000 9

CHAIN TIGHTENER DEVICECod: 760 025 140


ORDERING CODE

18

CODE

702 J XXX VS1

CHAPTER 4

Perpendicular(17mm higher than the back)

430

BRACKET KIT UNIT FOR PERPENDICULAR LINESCod: 760 070 010 S96

LINE QUOTE A

600 663

800 863

900 963

1000 1063


ORDERING CODE

19

CODE

702 J XXX VS2

CHAPTER 4

In line

Head

410

420

LINE QUOTE A

600 678

800 878

900 978

1000 1078

ASSEMBLY COVER HEADCod: 860070045

CHAIN TIGHTENER DEVICECod: 760 070 148

CODE XXX REFERRING TO CHAIN TIGHTENER TYPE:

XXX KIND

410 IN LINE

420 HEAD

430 PERPENDICULAR


LINE J

600 6

800 7

900 8

1000 9


ORDERING CODE

20

CODE

702 J XXX VS2

CHAPTER 4


430

NOTE:In case of heavy and unstable weight we add a special support pallet and itsrelative cover.

SUPPORT PALLET FOR VS2 LINECod. 860 070 014

COVER TIGHTENER HEAD FOR VS2 1000 LINECod. 860 070 023 (ONLY FOR VS2 1000 LINE)

LINE QUOTE A

600 678

800 878

900 978

1000 1078

BRACKET KIT UNIT FOR PERPENDICULAR LINESCod: 860 070 010

NOTE:If you need more protection, you can use a special cover head.

ASSEMBLY COVER HEAD FOR VS2 LINECod. 860 FOR 600 VS2 LINE Cod. 860 FOR 800 VS2 LINE Cod. 860 FOR 900 VS2 LINE Cod. 860 070 021 FOR 1000 VS2 LINE

Plate to link the heads, in case of heavy pallets.

SISTEMAS VS1MOTORIZED HEADORDERING CODE

21

CODE

702 J XXX VS1 YYY

CHAPTER 5

In line

Head

510

520

CODE YYY REFERRING TO GEARMOTOR

BNF BONFIGLIOLI

SEW SEW-EURODRIVE

LINE QUOTE A

600 663

800 863

900 963

1000 1063


CODE XXX REFERRING TO MOTORIZED HEAD TYPE:

XXX KIND

510 IN LINE

520 HEAD

530 PERPENDICULAR


LINE J

600 6

800 7

900 8

1000 9

NOTE:GEARMOTOR NOT INCLUDED, SEE CHAPTER 6


22

CODE

702 J XXX VS1 YYY

CHAPTER 5


530

LINE QUOTE A

600 663

800 863

900 963

1000 1063


SISTEMAS VS1MOTORIZED HEAD UNDER HEAD

ORDERING CODE

23

CODE

702 J XXX VS1 YYY

CHAPTER 5

In line

Head

610

620

CODE YYY KIND OF GEARMOTOR

BNF BONFIGLIOLI

SEW SEW-EURODRIVE

NOTE: The motorized heads under head are used if dimensional problemsoccur. The gearmotor is positioned under the head and the trasmission occur by the chain trasmission.

TENSIONING DEVICECod: 760 025 148

LINE QUOTE A

600 663

800 863

900 963

1000 1063



XXX KIND

610 IN LINE

620 HEAD

630 PERPENDICULAR


LINE J

600 6

800 7

900 8

1000 9 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6


24

CODE

702 J XXX VS1 YYY

CHAPTER 5


630LINE QUOTE A

600 663

800 863

900 963

1000 1063



25

CODE

702 J XXX VS2 YYY

CHAPTER 5

In line

Head

510

520

LINE QUOTE A

600 678

800 878

900 978

1000 1078

ASSEMBLY COVER HEADCode 86007045


XXX KIND

510 IN LINE

520 HEAD

530 PERPENDICULAR


LINE J

600 6

800 7

900 8

1000 9

CODE YYY REFERRING TO GEARMOTOR

BNF BONFIGLIOLI

SEW SEW-EURODRIVE

NOTE:GEARMOTOR NOT INCLUDED, SEE CHAPTER 6


26

CODE

702 J XXX VS2 YYY

CHAPTER 5


530

NOTE: In case of heavy and unstable weight we add an special support

pallet and its relative cover.

LINE QUOTE A

600 678

800 878

900 978

1000 1078


NOTE:If you need more protection at the motorized shaft, you can use a special cover head.

ASSEMBLY COVER HEAD FOR VS2 LINECod. 860 FOR 600 VS2 LINE Cod. 860 FOR 800 VS2 LINE Cod. 860 FOR 900 VS2 LINE Cod. 860 070 021 FOR 1000 VS2 LINE

SUPPORT PALLET FOR VS2 LINECod. 860 070 014

COVER TIGHTENER HEAD FOR VS2 1000 LINECod. 860 070 022 (ONLY FOR VS2 1000 LINE)

Plate to link the heads, in case of heavy pallets.

SISTEMAS VS2MOTORIZED HEAD UNDER HEAD

ORDERING CODE

27

CODE

702 J XXX VS2 YYY

CHAPTER 5

In line

Head

610

620

CODE YYY KIND OF GEARMOTOR

BNF BONFIGLIOLI

SEW SEW-EURODRIVE

ASSEMBLY COVER HEADCod: 770 101 078-DXCod: 770 101 078-SX

LINE QUOTE A

600 678

800 878

900 978

1000 1078

TENSIONING DEVICECod: 760 025 148

NOTE: The motorized heads under head are used if dimensional problemsoccur. The gearmotor is positioned under the head and the trasmission occur by the chain trasmission.


XXX KIND

610 IN LINE

620 HEAD

630 PERPENDICULAR


LINE J

600 6

800 7

900 8

1000 9 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6


28

CODE

702 J XXX VS2 YYY

CHAPTER 5


630LINE QUOTE A

600 678

800 878

900 978

1000 1078


SISTEMAS VSGEARMOTORS

ORDERING CODE

29

CODE

703 JJ 1 Z 90 YYY

CHAPTER 6

CODE JJ CHAIN SPEED (m/min)

02 4.5

12 6

22 9

32 12

CODE YYYBRAND OF GEARMOTOR

BNF BONFIGLIOLI

SEW SEW - EURODRIVE

CODE ZASSEMBLING OF

GEARMOTOR

0 FOR LINE MODULE

9 FOR TRANSFER UNIT

NOTE:THE DIMENSIONS ARE APPROXIMATED.THE DIMENSIONS HAS TO BE CHECKED IN BASE OF THE GEARMOTOR BRAND.

SISTEMAS VSSPACERS

ORDERING CODE

CODE

716 J K XX VSZ

CHAPTER 7


LINE J

600 6

800 7

900 8

1000 9

WE PROVIDE THREE DIFFERENT KIND OF STOP UNIT:

THE RIGHT KIND OF STOP UNIT IS CHOSEN CONSIDERING:- THE WEIGHT OF THE PALLET - THE SPEED OF THE CHAIN.REFER TO LAMMAS TECHNICAL DEPARTEMENT IN ORDER TO CHOOSE THE CORRECT STOP UNIT.

SPACER WITH SHORT STOP UNIT

SPACER WITH MEDIUM STOP UNIT

SPACER WITH LONG STOP UNIT

30

CODE KXX REFERRING TOTYPE OF SPACER:

SPACER KXX

SIMPLE SPACER 000

SPACER + COUNTERSTOP 001

SPACER + PALLET READER 005

SPACER + FIXED STOP UNIT 009

SPACER + STOP UNIT K10

SPACER + STOP UNIT + FIXED STEM K50

SPACER + BIDIRECTIONAL STOP UNIT 080

BIDIRECTIONAL DAMPERED STOP UNIT K81

SPACER + PNEUMATIC STOP UNIT K95

STOP UNIT + PALLET READER + TWEEZER KIT K96

LIGHT SPACER 099

Z LINE KIND:

1 VS1 LINE

2 VS2 LINE

CODE K REFERRING TO DIMENSIONS OF STOP UNIT:

STOP UNIT CODE K APPLICATION

SHORT 2 Weight of pallet up to 1000 kg

MEDIUM 3 Special app for rotary tablet

LONG 1Weight of pallet up to 1500 kg and conveyor speed 12 m/sec

NOTE: Shock absorber excluded, to be ordered separately, considering:

- the pallet weight (loaded and empty)- the conveyor speed (see chapter 3).

K=1

K=3

K=2

SISTEMAS VSSPACERS

ORDERING CODE

31

CODE

716 J K XX VSZ

CHAPTER 7

SIMPLE SPACER

SPACER + COUNTERSTOP

SPACER + PALLET READER

000

001

005

KIND OF PALLET READER A (mm)

Short bracket Cod. 760070164 86

OPTION: SENSOR Ø18 Code 001417748

COUNTERSTOP Code 455333000

PALLET IN ENTRANCE

SISTEMAS VSSPACERS

ORDERING CODE

32

CODE

716 J K XX VSZ

CHAPTER 7

K10 SPACER + STOP UNIT

K50 SPACER + STOP UNIT + FIXED STEM

OPTION: N°1 SHOCK ABSORBER

OPTION: N°2 SENSOR Ø12 Cod. 001415748


HEAD KIT Cod. 760070134


009 SPACER WITH FIX STOP UNIT

OPTIONAL: N°1 SENSOR Ø12 Cod. 001415748



SISTEMAS VSSPACERS

ORDERING CODE

33

CODE

716 J K XX VSZ

CHAPTER 7

K81SPACER + BIDIRECTIONAL DAMPERED STOP UNIT

K95 SPACER + PNEUMATIC STOP UNIT

HEAD KIT Cod.760070135


080 SPACER + BIDIRECTIONAL STOP UNIT







SISTEMAS VSSPACERS

ORDERING CODE

34

CODE

716 J K XX VSZ

CHAPTER 7

099 SIMPLE SPACER

UNDER LINE SPACER Cod: 860 716 003FOR 1000 LINE VS2

ACCESSORIESBRACKET FOR STOP UNITCod. 860 070 043

NOTE: REFER TO LAMMAS TECHNICAL DEPT.:• FOR DIMENSIONAL DETAILS OF SPACERS.• ACCESSORIES THAT IT CAN BE MOUNTED.

• ORDERING CODE.

ACCESSORIESSTOP UNIT( see chapter 14)

UNDER LINE CHEAPER SPACER (Light solution)

SISTEMAS VSTYPES OF TRANSFER UNITS

OVERALL DIMENSIONS

35 CHAPTER 8

LINE NUMBER OF CYLINDERS

MAXIMUM CAPACITY

(Kg)

600 1 600 Kg

800 2 1000 Kg

900 2 1000 Kg

1000 3 1500 Kg

NOTE: THE LIFTING OF PALLET OCCURS THANKS TO DOUBLE EFFECT PNEUMATIC FESTO CYLINDER BORE 125

MM STROKE 80 MM.FOLLOWING THE SIZE OF LINE ARE USED FROM 1 TO 3 PNEUMATIC FESTO CYLINDER.

PNEUMATIC CYLINDER

THE INDEX PALLET OF TRANSFER UNITOCCURS THANK CYLINDERS AND AECCENTRIC GROUP

GEARMOTOR

IT IS USED TO MOVE THE CHAINAND TRANSFER PALLET

IT IS USED TO INDEX PALLET

Following the pallet weight we use one, two or three cylinders

SISTEMAS VSEND TRANSFER UNITS

ORDERING CODE

36

CODE

706 J XXX VSZ YYY

CHAPTER 9

011


LINE J

600 6

800 7

900 8

1000 9

PERPENDICULAR TOP-DOWN

NOTE: ORIGIN LINE 17 mm HIGHEST

LEFT RIGHT

OPTIONS:N°2 Shock absorbersN° 1 Sensor kit ()N°1 Sensor Ø12 (001415748) – Stop unit

1) N°1 Transfer unit2) 716 J 205 VSZ – n°1 Spacer type 2053) 716 J 000 VSZ – n°1 Spacer type 201 4) 716 J 210 VSZ – n°1 Spacer type 2105) 760015018 - n° 1 External stop for VS1 line

455362800 – n° 1 External stop for VS2 line

CODE DEFINITION XXX :Numbers from 011 to 023



Z LINE KIND:

1 VS1 LINE

2 VS2 LINE

CODE DEFINITION YYY :Referring to cylinderSee Tab. 3 page 5

LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E

VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2

600 663 678

800 863 878

900 963 978

1000 1063 1078

SISTEMAS VSEND TRANSFER UNITS

ORDERING CODE

37

CODE

706 J XXX VSZ YYY

CHAPTER 9

012 PERPENDICULAR BOTTOM-UPNOTE: ORIGIN LINE 17 mm LOWER

LEFT RIGHT


1) N°1 Transfer unit2) 716 J 205 VSZ – n°1 Spacer type 2053) 716 J 000 VSZ – n°1 Spacer type 201 4) 716 J 250 VSZ – n°1 Spacer type 250



600 663 678

800 863 878

900 963 978

1000 1063 1078


LINE J

600 6

800 7

900 8

1000 9




Z LINE KIND:

1 VS1 LINE

2 VS2 LINE


SISTEMAS VSSHUNTING TRANSFER UNIT

ORDERING CODE

38

CODE

706 J XXX VSZ YYY

CHAPTER 9

021 PERPENDICULARNOTE: ORIGIN LINE 17 mm LOWER

LEFT RIGHT

OPTIONS:N°2 Shock absorbersN° 1 Sensor kit ()N° 2 Sensor Ø12 (001415748) – Stop unit

1) N°1 Transfer unit2) 716 J 205 VSZ – n°2 Spacer type 2053) 716 J 000 VSZ – n°1 Spacer type 201 4) 716 J 210 VSZ – n°2 Spacer type 210

LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F

VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2

600 663 678

800 863 878

900 963 978

1000 1063 1078


LINE J

600 6

800 7

900 8

1000 9




Z LINE KIND:

1 VS1 LINE

2 VS2 LINE


SISTEMAS VSSHUNTING TRANSFER UNIT

ORDERING CODE

39

CODE

706 J XXX VSZ YYY

CHAPTER 9

052 SIDE BY SIDE PARALLEL LINES

NOTE: ORIGIN LINE 17 mm LOWER

LEFT RIGHT


1) N°1 Transfer unit2) 716 J 205 VSZ – n°1 Spacer type 2053) 716 J 210 VSZ – n°1 Spacer type 2104) 760015018 - n° 1 External stop for VS1 line

455362800 – n° 1 External stop for VS2 line

LINE QUOTE A QUOTE B QUOTE C QUOTE D

VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2

600 663 678

800 863 878

900 963 978

1000 1063 1078


LINE J

600 6

800 7

900 8

1000 9




Z LINE KIND:

1 VS1 LINE

2 VS2 LINE


SISTEMAS VSMANUAL WORKING STATIONS

ORDERING CODE

40

CODE

712 J XXX VS Z

CHAPTER 10

020 MANUAL WORKING STATION WITH STOP UNIT AND COUNTERSTOP

1) 716 J K10 VSZ – N°1 SPACER type 0102) 716 J 001 VSZ – N°1 SPACER type 001

OPTIONAL:N° 1 SHOCK ABSORBERN° 1 SENSOR KIT (712X020090S96)

LINE QUOTE A QUOTE B QUOTE C

VS1 VS2 VS1 VS2 VS1 VS2

600 663 678

800 863 878 429,5 432,5

900 963 978

1000 1063 1078 549 552


LINE J

600 6

800 7

900 8

1000 9

CODE DEFINITION XXX :Number 020



Z LINE KIND:

1 VS1 LINE

2 VS2 LINE

SISTEMAS VSINDEX PALLET UNITS

ORDERING CODE

41 CHAPTER 11

CODE

712 J XXX VS Z YYY

IT IS USED FOR LIGHT WEIGHT OF PALLETS.IT HAS ONLY 1 CYLINDER VERTICAL MOUNTED.

PALLET

CODE J REFERRING

TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

NOTE: SHOCK ABSORBER EXCLUDED, TO BE ORDERED SEPARATELY, CONSIDERING:

- THE PALLET WEIGHT (LOADED AND EMPTY)- THE CONVEYOR SPEED (SEE CHAPTER 3).

CODEZ

LINEKIND:

1 VS1 LINE

2 VS2 LINE

CODE

XXX

LIFTING HEIGHT FROM CHAIN LEVEL

(mm)

QUOTEZ

(mm)

050 4 253

051 16 266

052 41 291

CODEYYY

CYLINDER

FST FESTO

FKPFESTO with Clampingunit

SMC SMC

SKPSMC with Clampingunit

S16 LAMMAS

LIGHT VERSIONMAXIMUM LIFTER OF 500 Kg.

INDEX PALLET OCCURS THANKS TO A DOUBLE EFFECT PNEUMATIC CYLINDER BOREØ125.

WE GUARANTEE CENTERING PALLET WITH ± 0,1 mm.


ORDERING CODE

42 CHAPTER 11

CODE

712 J XXX VS Z YYY

PALLET

DOUBLE EFFECT PNEUMATIC CYLINDER BORE Ø125.

FOLLOWING THE PALLET WEIGHT USE ONE, TWO OR THREE CYLINDERS.

ECCENTRIC GROUP

INDEX PALLET UNIT WITH TWO CYLIDERS

HEAVY VERSIONLIFTER FROM 500 Kg TO 1500 Kg.

CODE J REFERRING

TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9



CODEZ

LINEKIND:

1 VS1 LINE

2 VS2 LINE

CODE

XXXNUMBER

OF CYLINDERWEIGHT

010 1 Up tp 500 Kg

020 2 500 ÷ 1000 Kg

030 3 1000 ÷1500 kg

CODEYYY

CYLINDER

FST FESTO


SMC SMC


S16 LAMMAS


LIFTING HEIGHT FROM CHAIN LEVEL 4 mm.


ORDERING CODE

43 CHAPTER 11

CODE

712 J XXX VS Z YYY

Pallet entry side




600 663 678

800 863 878

900 963 978

1000 1063 1078

1) 455 203 200 – n°1 Transfer unit2) 716 J K10 VSZ– n°2 Spacer 103) 716 J K01 VSZ– n°1 Spacer 01

OPTIONALS:N° 1 Sensor kit ()N° 2 Shock absorbers

SISTEMAS VSROTARY TABLES UNITS

ORDERING CODE

44 CHAPTER 12

CODE

712 J XXX VS Z YYY

INDEX PALLET OCCURS THANKS DOUBLE EFFECT PNEUMATIC CYLINDER BORE Ø125 mm STROKE 90 mm.THE ROTATION OCCUR BY ROTATING PNEUMATIC CYLINDER BORE Ø 80 ± 125 mm.

CYLINDERSFOLLOWING THE PALLET WEIGHT WE USE ONE, TWO OR THREE CYLINDERS

PALLET

ROTATING PNEUMATIC CYLINDER OCCURS THE ROTATION

ECCENTRIC GROUP

ROTATION

POSITION NUT USED FOR ROTATION AT 90° OR 180°.

ROTARY TABLE UNIT WITH TWO CYLIDERS

CODE J REFERRING

TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9



CODEZ

LINEKIND:

1 VS1 LINE

2 VS2 LINE

CODE XXX KIND OF ROTARY TABLES UNITS

061 90° INDEX AND ROTATION

062 180° INDEX AND ROTATION

CODEYYY

CYLINDER

FST FESTO


SMC SMC


S16 LAMMAS


SISTEMAS VSROTARY TABLES UNITS

ORDERING CODE

45 CHAPTER 12

CODE

712 J XXX VS Z YYY

1) – n°1 Rotary table unit2) 716 J K01 VSZ– n°1 Spacer 013) 716 J K10 VSZ– n°2 Spacer 10

OPTIONALS:N. 1 Sensor kit ()N. 2 Shock absorbers


Pallet entry side

LINE QUOTE A QUOTE B QUOTE C QUOTE D

VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2

600 663 678

800 863 878

900 963 978

1000 1063 1078

SISTEMAS VS1SINGLE LEG VS1

46

CODE

720 J XXX VS1 Z00

CHAPTER 13

CODE XXX

QUOTE A QUOTE C

085 952

080 902

075 852

070 802

065 752

060 702

055 652

050 602

045 552

040 502

035 452

030 402

025 352

NOTE:ADJUSTING HEIGHT RANGE OF THE FOOT +30 -20 MM

PALLET SLIDING PLANE

SUPPORT FOR VS1 LINE

QUOTE B REFERRING TO LINE:

LINE QUOTE B

600 493

800 693

900 963

1000 893

Ordering code:

720 9 055 VS1 Z00

ExampleSistemas 1000 VS1 –Single Leg with slidingplane A= 652

Code J Code XXX

CODE J REFERRING

TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

SISTEMAS VS2SINGLE LEG VS2

47

CODE

720 J XXX VS2 Z00

CHAPTER 13

CODE XXX QUOTE A QUOTE C

085 952

080 902

075 852

070 802

065 752

060 702

055 652

050 602

045 552

040 502

035 452

030 402

025 352

020 302

NOTE:ADJUSTING HEIGHT RANGE OF THE FOOT +30 -20 MM

PALLET SLIDING PLANE

SUPPORT FOR VS2 LINE

QUOTE B BASING ON TYPE OF LINE:

LINE QUOTE B

600

800

900

1000

Ordering code:

720 7 035 VS2 Z00

ExampleSistemas 800 VS2 –Single Leg with slidingplane A= 452

Code J Code XXX

CODE J REFERRING

TO TYPE OF LINE:

LINE J

600 6

800 7

900 8

1000 9

SISTEMAS VSSTOP UNIT AND ITS HEAD KITS

48 CHAPTER 14

STOP UNIT COMPOSITION HEAD KIT

STOP GROUP 770 213 475

AMORTIZED UNIT 770 143 308

STANDARD STOP HEAD KITS

HEAD KIT Cod. 760 070 134 HEAD KIT Cod. 760 070 135

SENSOR Ø12 OPTIONAL

SISTEMAS VSSTOP UNIT

49 CHAPTER 14

WITH STEM EXTRACTIONCOD. 773 000 2 10

WITHOUT STEM EXTRACTIONCOD. 773 000 2 50





SHORT AMORTIZED STOP UNIT

MEDIUM AMORTIZED STOP UNIT

LONG AMORTIZED STOP UNIT

The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125).

SHORT FIXED STOP UNIT


FIXED STOP UNITAMORTIZED STOP UNIT


STOP UNIT

CODE K

APPLICATION

SHORT 2Weight of pallet up to 1000 kg

MEDIUM 3Special app for rotary

tablet

LONG 1Weight of pallet up to 1500 kg and conveyorspeed 12 m/sec


50 CHAPTER 14

BI-DIRECTIONAL FIXED STOP UNIT

SHORT BI-DIRECTIONAL AMORTIZED STOP UNIT

MEDIUM BI-DIRECTIONAL AMORTIZED STOP UNIT

LONG BI-DIRECTIONAL AMORTIZED STOP UNIT

BI-DIRECTIONAL AMORTIZED STOP UNIT

SHORT BI-DIRECTIONAL FIXED STOP UNIT

MEDIUM BI-DIRECTIONAL FIXED STOP UNIT

LONG BI-DIRECTIONAL FIXED STOP UNIT


COD. 773 000 2 81

COD. 773 000 3 81

COD. 773 000 1 81

COD. 773 000 2 80

COD. 773 000 3 81

COD. 773 000 1 81


51 CHAPTER 14

AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN

COD. 773 000 Z 95

SHORT AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN

MEDIUM AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN

LONG AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN

The stem extraction thanks double effect pneumatic cylinder bore 40 mm stroke 15 mm with spring return.

The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket(Cod. 760 070 125).

COD. 773 000 1 95

COD. 773 000 2 95

COD. 773 000 3 95


STOP UNIT

CODE K

APPLICATION

SHORT 2Weight of pallet up to 1000 kg

MEDIUM 3Special app for rotary

tablet

LONG 1Weight of pallet up to 1500 kg and conveyorspeed 12 m/sec

SISTEMAS VSOLD VERSION STOP UNIT

52 CHAPTER 14

AMORTIZED STOP UNIT Cod. 773 000 007 S03 WITH STEM EXTRACTION

Cod. 773 000 008 S03 WITHOUT STEM EXTRACTION

FIXED STOP UNIT Cod. 773 000 015 S03 WITH STEM EXTRACTION

BI-DIRECTIONAL AMORTIZED STOP UNIT Cod. 773000014S03

BI-DIRECTIONAL FIXED STOP UNITCod. 773 000 010 S03


SISTEMAS VSOLD VERSION STOP UNIT

53 CHAPTER 14

AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN Cod. 773 000 009 S03

BI-DIRECTIONAL AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN Cod. 773 000 012 S03

The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125)

The stem extraction is managed bydouble effect pneumatic cylinder bore 40 mm stroke 15 mm with spring return.

SISTEMAS ACCESSORIESSTOP UNITS

54 CHAPTER 16

ACCESSORIES DRAWING NOTE

COUNTERSTOPCOD. 455333000

USED TO STOP PALLET.

HEAVY COUNTERSTOPCod. 455333200

USED TO STOP PALLET.(USED ONLY IN SPECIAL CASES).

EXTERNAL STOP UNIT COD. 760015018 VS1COD. 455362800 VS2

OPTIONALS:1 SENSOR Ø12 (001415748)1 SHOCK ABSORBER

EXTERNAL STOP UNIT WITH PENUMATIC RETAINCOD. 455362850 VS2

OPTIONALS:1 SENSOR Ø12 (001415748)1 SHOCK ABSORBER

SISTEMAS ACCESSORIESNUTS

55 CHAPTER 16


T-NUT VS1COD. 770111001 M6 HOLECOD. 770111078 M5 HOLECOD. 770111077 M4 HOLE

USED TO FIX ACCESSORIES TO VS1 LAMMAS PROFILE.

T-NUT VS2COD. 770111007 M8 HOLE

USED TO FIX ACCESSORIES TO VS2 LAMMAS PROFILE.

INTRAMODULAR NUT VS1COD. 780000190S96 KITCOD. 770111002

USED TO JOIN VS1 LAMMAS PROFILE.

INTRAMODULAR NUT VS2COD. 860070017 KITCOD. 770111167

USED TO JOIN VS2 LAMMAS PROFILE.

INTRAMODULAR NUT VS2COD. 860070018 KITCOD. 770111168

USED TO ALIGN MOTORIZED/CHAIN THIGTENER HEADS ON LAMMAS MODULES.

KIT STOP COVER NUTCOD. 100300KIT

USED TO FIX VS1 LAMMAS COVERS ON LINE MODULES.

ZINC COATED INSERTCOD. 770323001

APPLIED ON FEET.

NUT FIXING STEEL RODCOD. 770111138

USED TO FIX HARDENED STEEL GUIDES ON LINE MODULES.

SISTEMAS ACCESSORIESNUTS

56 CHAPTER 16


NUT OVER PLATE KIT COD. 760070266 FOR WEIGHT < 50 Kg (POLYDUR)COD. 760070FOR WEIGHT > 50 Kg (IRON)

USED TO UP OVER PLATE IN ORDER TO NOT CREATE MALFUCTIONS OF ACCESSORIES.

HARDENED STEEL GUIDECOD. 770224004

USED TO GUIDE LAMMAS CHAIN ON LINE MODULES.

AVAILABLE IN ROD 1,5 METERS

PLASTIC GUIDECOD. 006312003

USED TO GUIDE LAMMAS CHAIN ON LINE MODULES.

AVAILABLE IN METERS

SISTEMAS ACCESSORIESSENSORS AND SUPPORTS

57 CHAPTER 16


SENSOR Ø12COD. 001415748

USED TO READ THE POSITION OF STOP UNIT OR OTHER DEVICES.

SENSOR Ø18COD. 001417748

USED TO READ PALLET POSITION.

SENSOR SUPPORT Ø12COD. 001402312

USED TO HOLD SENSOR Ø12.

SENSOR SUPPORT Ø18COD.

USED TO HOLD SENSOR Ø18.

SENSOR SUPPORT Ø18FOR SPACER COD. 455333000

USED TO HOLD SENSOR Ø18 IN ORDER TO READ THE PALLET POSITION.

STOP BUSHCOD. 770121111

ASSEMBLED WITH SHOCK ABSORBER.

PLATE FOR SENSORSUPPORT Ø12COD. 455098412

USED TO BRING SENSOR SUPPORT Ø12.

SISTEMAS ACCESSORIESSENSORS AND SUPPORTS

58 CHAPTER 16


SENSOR BUSH VS2COD. 770142346FOR Ø12 SENSORSCOD. 770142347FOR Ø18 SENSORS

USED TO HOLD SENSOR Ø12/Ø18 IN ORDER TO READ THE STOP UNIT POSITION.

SISTEMAS ACCESSORIESBRACKETS

59 CHAPTER 16


STOP UNIT BRACKETCOD. 860070043 KITCOD. 770213486

USED TO FIX STOP ON MOTORIZED/CHAIN-TIGHTENER HEADS.

BRACKET FIXING FLOOR COD. 860070042 KITCOD. 770142321

USED TO FIX LEGSON FLOOR.

PROFILES CONNECTION BRACKET VS1COD. 760070176 KITCOD. 770142220

USED TO CONNECT 60X80 LAMMAS FROFILES ON VS1 LINE MODULES.

PROFILES CONNECTION BRACKET VS2COD. 760070197 KITCOD. 770142227

USED TO CONNECT 60X80 LAMMAS FROFILES ON VS2 LINE MODULES.

PROFILE CONNECTION BRACKET (SMALL)COD. 760070094 KITCOD. 770142091

USED TO CONNECTLIGHT LAMMAS FROFILES.

PERPENDICULAR BRACKET COD. 760070010S96 KIT VS1COD. 860070010 KIT VS2

USED TO CONNECTS PERPENDICULAR LINE MODULES.

SISTEMAS ACCESSORIESACCESSORIES

60 CHAPTER 16


CHAIN TIGHTENER DEVICE VS1COD. 760025140

USED TO TENSION VS1 CHAIN.

CHAIN TIGHTENER DEVICE VS2COD. 760070148

USED TO TENSION VS2 CHAIN.

CLAMP KITCOD. 860070032

APPLIED WITH STOP UNITON SPACER.

OIL COLLECTION CUPCOD. 760070122 KIT VS1COD. 860070012 KIT VS2COD. 770201275

APPLIED UNDER MOTORIZED/CHAIN TIGHTENER HEAD IN JUNCTION OF LINE MODULE.

PALLET SUPPORTCOD. 860070005

USED TO DRIVE PALLET.






61 CHAPTER 16


PALLET SUPPORT VS2COD. 860070014

USED TO DRIVE VS2 PALLET.

PALLET SUPPORT VS1COD. 455219000

USED TO DRIVE VS1 PALLET.

VS1 MOTORIZED HEAD PROFILE (WITH HOLE)COD. 760031011

USED IN MOTORIZED HEADS.

VS1 MOTORIZED HEAD PROFILE (WITHOUT HOLE)COD. 760031010


VS1 CHAIN TIGHTENER HEAD PROFILECOD. 760031006 (RIGHT)COD. 760031013 (LEFT)

USED IN CHAIN TIGHTENER PROFILE.


62 CHAPTER 16


VS2 MOTORIZED HEAD PROFILE COD. 860031015


VS2 CHAIN TIGHTENER HEAD PROFILECOD. 860031018

USED IN CHAIN TIGHTENER PROFILE.

SISTEMAS ACCESSORIESCOVERS

63 CHAPTER 16


COVER HEAD VS1COD: 760636001S03 600 VS1COD: 760736001S03 800 VS1 COD: 760836001S03 900 VS1 COD: 760936001S03 1000 VS1

USED TO COVER VS1 MOTORIZED/CHAIN TIGHTENER HEADS.

COVER HEAD VS2COD. 860070045 KITCOD. 770101078DXCOD: 770101078SX


COVER HEAD VS2COD. 860 600COD. 860 800COD. 860 900 COD. 860070021 1000


COVER TIGHTENER HEAD VS2 COD. 860070023ONLY FOR 1000 VS2 LINE

USED TO COVER VS2 CHAIN TIGHTENER HEADS.

COVER MOTORIZED HEAD VS2 COD. 860070022ONLY FOR 1000 VS2 LINE

USED TO COVER VS2 MOTORIZED HEADS.

SISTEMAS ACCESSORIESLAMMAS PROFILES

64 CHAPTER 16


BASIC VS1 LAMMAS PROFILE COD. 006310801

BASIC VS1 LAMMAS PROFILE FOR LIGHT LINE.

SPECIFIC GRAVITY: 10,9 Kg/m

BASIC VS2 LAMMAS PROFILE COD. 006316681

BASIC VS2 LAMMAS PROFILE FOR LIGHT LINE.


COVER LINE MODULES VS1COD. 006316650 800 VS1

COVER FOR VS1 LINE MODULES.

SPECIFIC GRAVITY: Kg/m

EXTERNAL COVER VS2COD. 006316701

EXTERNAL COVER FOR VS2 LINE MODULES.

SPECIFIC GRAVITY: 1 Kg/m

INTERNAL COVER VS2COD. 006316691

INTERNAL COVER FOR VS2 LINE MODULES.



65 CHAPTER 16


INTERNAL COVER VS2COD. 770201289 FOR ROLLER CHAINCOD. 770201264FOR FLAT LINK

GALVANIZED STEEL INTERNAL COVER FOR VS2 LINE MODULES.

NOTE: AVAILABLE IN METERS

60X80 PROFILECOD. 006310651


60X80 PROFILE CAPCOD. 770201239

LEG PROFILECOD. 006310431


LEG PROFILE CAPCOD. 770144075

45X45 PROFILECOD. 006316621


45X45 PROFILE CAPCOD.770144099

120X80 LIGHT PROFILECOD. 006310371


120X80 PROFILE CAPCod. 770201244


66 CHAPTER 16


200X100 PROFILECOD. 006310391


IT IS STRONG LAMMAS PROFILE.

SISTEMAS VS1CHAINS VS1

67 CHAPTER 16

5/8” CHAIN FOR VS1 LINE P – PITCH = 5/8” – 15,875 mmM – LINK = 31,75 mm

DOUBLE IDLE CHAIN (DDR)Cod. 006 370 075

DOUBLE SILENT CHAIN (DSP)Cod. 006 370 080

SISTEMAS VS2CHAINS VS2

68 CHAPTER 16

3/4” CHAIN FOR VS2 LINE P – PITCH = 3/4” – 19,05 mmM – LINK = 38,1 mm

TRIPLE CHAIN WITH CENTRAL ROLLER (FLR)Cod. 006 370 025

TRIPLE CHAIN WITH CENTRAL ROLLER + PLASTIC INSERT (FIP)Cod. 006 370 025-IP

TRIPLE CHAIN WITH FLAT LINK (FMP) Cod. 006 370 046

PLASTIC INSERT

CENTRAL ROLLER

FLAT LINK

SISTEMAS VS

LAMMAS s.r.l.

Strada Castellamonte-Bairo 1/A10010 Bairo (TO) Italy.

Tel: +390124501266Fax: +390124501047

Email: [email protected]


REPRODUCTION (EVEN IF PARTIAL) OF THIS TECHNICAL CATALOG IT IS FORBIDDEN.IT IS NOT ACCEPTED ANY RESPONSABILITY FOR ERRORS OR OMISSIONS.

FOR CAD FILES ASK TO

www.lammas.it

mailto:[email protected]

http://www.lammas.it/IT/

SISTEMAS VS TECHNICAL CATALOG -...

Documents

Transcript of SISTEMAS VS TECHNICAL CATALOG -...