Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1:...

8
54 BioProcess International 12(3) MARCH 2014 B IO P ROCESS TECHNICAL Single-Use Bioreactors and Microcarriers Scalable Technology for Cell-Based Therapies by Mark Szczypka, David Splan, Heather Woolls, and Harvey Brandwein C ell-based therapies hold promise for treating many acute and chronic diseases ( 1). Optimism surrounding that therapeutic potential has driven the initiation of multiple clinical trials in pursuit of such treatments. Procedures for preparing these therapeutic agents begin with selective isolation of cells from desired tissues. That is followed by ex vivo expansion of cells of desired phenotype and functionality. Once expanded to acceptable levels, cells are stored to preserve their viability during transportation to treatment facilities. The final step in the process of cell therapy treatment involves infusion of cells into patients through a number of administration routes (2, 3). Although significant progress has already been made within each step of that process, specific challenges still require addressing in further developmental studies if cell therapies are to become widely available. Advances in cell characterization techniques, media formulation, and identification of specific cell markers; development of potency assays; and improvements in processing technologies are rapidly moving this field forward as many groups focus their efforts to optimize each process step. It is clear, however, that development of scalable methods for expanding large numbers of cells represents a challenge that will require significant effort to overcome (4). ADHERENT STEM CELL CULTURES Adherent stem cells (ASCs) are present in many organs and tissues, including bone marrow, peripheral blood, and adipose tissue (5–14). These cells represent <0.1% of the total tissue mass. Once harvested, they possess a limited doubling capacity. It is generally accepted that ASCs must remain in an undifferentiated state when expanded in culture to retain their therapeutic properties. Studies have shown that when ASC cultures reach high cell densities, they begin to differentiate into more mature cell types and lose their ability to replicate ( 15). All these attributes present a considerable challenge for expanding large numbers of such cells. Common tissue sources for harvest of adherent ASCs include bone marrow, adipose tissue, placenta, and dental pulp. Harvested cells adopt a fibroblast-like morphology when cultured in vitro, and they occupy a relatively large footprint, thus requiring a significant amount of surface area (SA) for expansion. Current estimates predict that clinically relevant dosages will range from 10 5 to 10 9 cells per dose depending on the indication ( 16, 17). In ongoing clinical trials, companies are attempting to identify the lowest effective dose required for treatment of various diseases. Considering that a single clinical indication could have a patient population >250,000 individuals per year (requiring the expansion of 10 12 –10 14 cells to treat these individuals), there is a significant demand to develop robust, efficient, reproducible, and scalable processes for generating therapeutically active cells. For perspective, the SA required for expanding 10 12 anchorage- dependent ASCs is about equivalent to the area of two American football fields. That highlights the need for exploring technologies and processes that can best meet such demand. And here is where the benefits of single-use bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion on two horizontal axes at 90 degrees separation), which improves agitation properties, providing for shorter mixing times and higher mass transfer rates. It is a fully enclosed platform with a safety interlock that improves operator safety, is suitable for production environments, and protects light- sensitive culture media. PRODUCT FOCUS: CELL THERAPIES PROCESS FOCUS: MANUFACTURING WHO SHOULD READ: PROCESS/PRODUCT DEVELOPMENT AND MANUFACTURING KEYWORDS: ADHERENT CELLS, STIRRED- TANK BIOREACTORS, SCALE-UP LEVEL: INTERMEDIATE

Transcript of Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1:...

Page 1: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

54 BioProcess International 12(3) March 2014

B i o P r o c e s s TECHNICAL

Single-Use Bioreactors and MicrocarriersScalable Technology for Cell-Based Therapies

by Mark Szczypka, David Splan, Heather Woolls, and Harvey Brandwein

C ell-based therapies hold promise for treating many acute and chronic diseases (1). Optimism surrounding that

therapeutic potential has driven the initiation of multiple clinical trials in pursuit of such treatments. Procedures for preparing these therapeutic agents begin with selective isolation of cells from desired tissues. That is followed by ex vivo expansion of cells of desired phenotype and functionality. Once expanded to acceptable levels, cells are stored to preserve their viability during transportation to treatment facilities. The final step in the process of cell therapy treatment involves infusion of cells into patients through a number of administration routes (2, 3).

Although significant progress has already been made within each step of that process, specific challenges still require addressing in further developmental studies if cell therapies are to become widely available. Advances in cell characterization techniques, media formulation, and identification of specific cell markers; development of potency assays; and improvements in processing

technologies are rapidly moving this field forward as many groups focus their efforts to optimize each process step. It is clear, however, that development of scalable methods for expanding large numbers of cells represents a challenge that will require significant effort to overcome (4).

Adherent stem cell cultures

Adherent stem cells (ASCs) are present in many organs and tissues, including bone marrow, peripheral blood, and adipose tissue (5–14). These cells represent <0.1% of the total tissue mass. Once harvested, they possess a limited doubling capacity. It is generally accepted that ASCs must remain in an undifferentiated state when expanded in culture to retain their therapeutic properties. Studies have shown that when ASC cultures reach high cell densities, they begin to

differentiate into more mature cell types and lose their ability to replicate (15). All these attributes present a considerable challenge for expanding large numbers of such cells.

Common tissue sources for harvest of adherent ASCs include bone marrow, adipose tissue, placenta, and dental pulp. Harvested cells adopt a fibroblast-like morphology when cultured in vitro, and they occupy a relatively large footprint, thus requiring a significant amount of surface area (SA) for expansion. Current estimates predict that clinically relevant dosages will range from 105 to 109 cells per dose depending on the indication (16, 17). In ongoing clinical trials, companies are attempting to identify the lowest effective dose required for treatment of various diseases.

Considering that a single clinical indication could have a patient population >250,000 individuals per year (requiring the expansion of 1012–1014 cells to treat these individuals), there is a significant demand to develop robust, efficient, reproducible, and scalable processes for generating therapeutically active cells. For perspective, the SA required for expanding 1012 anchorage-dependent ASCs is about equivalent to the area of two American football fields. That highlights the need for exploring technologies and processes that can best meet such demand. And here is where the benefits of single-use bioreactors and microcarriers are realized.

Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion on two horizontal axes at 90 degrees separation), which improves agitation properties, providing for shorter mixing times and higher mass transfer rates. It is a fully enclosed platform with a safety interlock that improves operator safety, is suitable for production environments, and protects light-sensitive culture media.

Product Focus: Cell therapies

Process Focus: ManufaCturing

Who should reAd: proCess/produCt developMent and ManufaCturing

KeyWords: adherent Cells, stirred-tank bioreaCtors, sCale-up

level: interMediate

Page 2: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

56 BioProcess International 12(3) March 2014

tWo-dimensionAl cell culture

Traditional stem cell culture involves two-dimensional (2-D) surfaces under static conditions. Examples of such technology include tissue culture plates and T flasks, which provide SAs in the hundreds of square centimeters. Given the SA requirements for generating large numbers of cells and many open handling steps required when using those standard vessels, it is clear that such platforms quickly become impractical as solutions for large-scale cell expansion. It would require some 220,000 standard T150 f lasks to generate 1012 human mesenchymal stem cells (hMSCs) derived from bone marrow harvested at a cell density of 3.0 × 104 cells/cm2.

Roller bottles and multiplate culture flasks (e.g., Thermo Scientific’s Nunc Cell Factory and Corning’s Cell Cube and HyperFlask systems) have provided a next-generation solution for cell expansion by introducing vessels with increased SA. Roller bottles and the Nunc systems provide SAs that can reach thousands of square centimeters per vessel. Both platforms are attractive in that they are extensions of 2-D cell culture practices, but they also can become impractical when larger numbers of cells are needed. Cell Factory systems have successfully generated >200 million (2 × 108) hMSCs per vessel for clinical use. But larger vessels can be difficult to physically handle, require specialized equipment, and occupy large amounts of incubator space when >5–10 vessels are needed (18, 19).

A lack of environmental control and difficulties in obtaining uniform cell growth have limited such platforms, making them problematic for reliable generation of functional cell products. To enhance the former, manufacturers have prospectively designed and integrated continuous automated feed systems into the vessels or retrofitted systems to include such features. The ATMI Integrity Xpansion bioreactor is one example of a multiplate reactor that includes an integrated environmental control system for cell expansion (20).

That system offers SAs up to 11 m2, so it provides a possible solution when intermediate numbers of cells are needed.

BioreActors And single-use technologies

Bioreactors have been used for decades to produce a range of therapeutic biomolecules, affording operators the opportunity to monitor and control environmental conditions continuously throughout the culture period with the added benefit of maintaining an entirely closed system. Adding microcarriers is a mechanism for providing large surface areas for growth of anchorage-dependent cells. Stainless steel tanks are used at volumes ranging from tens to thousands of liters in vaccine and biologics production, and many manufacturers have incorporated microcarriers into their processes (21–23). Successful implementation of small- and large-scale bioreactor culture has contributed to the accumulation of a substantial library of data from which manufacturers can draw when developing new processes. Innovative methodologies for gas transfer, maintenance of pH, and optimal feeding and cell quantification have been developed. All innovations have contributed to the possibility of adopting this technology for cell expansion of adherent ASC on microcarriers (24, 25).

Introduction of single-use technologies (SUTs) including disposable bioreactors to manufacturing processes has created a

Figure 2: Simplified schematics of bioreactor and microcarrier-based cell-expansion processes; (a) cells dissociated and separated from microcarriers are sequentially transferred to larger vessels containing fresh microcarriers; (b) fresh microcarriers and media are added to a vessel after initial expansion period, and cells are encouraged to transfer from populated beads (blue spheres) to fresh microcarriers (orange spheres) by direct migration to unpopulated beads.

1 L 20 L 250 L

B

A

Figure 1: (a) Cell-attachment kinetics are not adversely compromised when Pall SoloHill microcarriers are irradiated at 25 or 40 kGy. The number of cells attached to autoclaved and gamma-irradiated microcarriers were quantified, and no difference in attachment was observed (24). (b) Comparison of Vero cell growth on autoclaved and gamma-irradiated Hillex II microcarrriers; no difference in growth was observed in spinner cultures (25).

0

10

20

30

40

50

60

1 2 3 4 5 6 7

Nuc

lei (

e4 /cm

2 )

Day

Hillex II

Autoclavedγ Radiated

BA

1 24

FACT III

25 kGy

37.5-40 kGy

Autoclaved

0

20

40

60

80

100

120

1 24

% C

ell A

ttac

hmen

t

Hours of Incubation

Hillex II

Hours of Incubation

Page 3: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

58 BioProcess International 12(3) March 2014

cost-effective platform that can be conveniently coupled with microcarriers. A number of such bioreactors are commercially available: ATMI’s PadReactor system, Thermo Scientific HyClone’s S.U.B. single-use bioreactor, GE Healthcare’s WAVE bioreactor, Millipore’s Mobius system, and Sartorius-Stedim Biotech’s BIOSTAT STR bioreactor.

Pall Life Sciences has recently introduced a new rocking platform system called the XRS 20 bioreactor system (Photo 1). It is a single-use bioreactor system with unique biaxial agitation and control properties designed for cultivation of mammalian cells in suspension culture under controlled conditions. Current units are suitable for applications ranging from life-science research to seed-train operations and good manufacturing practice (GMP) production at the 2-L to 20-L scale.

Many SUTs are used by contract manufacturing organizations (CMOs) and pharmaceutical companies for manufacturing vaccines and therapeutic molecules using adherent cell lines. The attractiveness of such platforms — along with their successful implementation at manufacturing scale — has prompted cell therapy companies to engage in developmental efforts to determine whether SUTs coupled with microcarrier technologies can provide a viable solution for stem cell expansion.

microcArriers in stirred-tAnK reActors

Microcarriers are tiny spheres or particles (typically 90–300 µm in diameter) used for culturing adherent cells in stirred-tank bioreactors. The geometry of microcarriers provides investigators with an ability to increase the amount of SA in a given volume (cm2/mL) of medium. Therefore, one driver for transitioning from 2-D platforms to microcarriers is the benefit of increasing SA-to-volume ratio when scaling up to larger systems. Increasing that ratio improves product consistency and decreases costs through full use of culture medium for growing large numbers of cells (4).

However, that advantage is realized only when cells are attached to and grow on the surfaces of most of the microcarriers in a vessel, thus maximizing SA coverage. Conditions that promote efficient attachment and even distribution of cells across an entire microcarrier population therefore must be optimized. Generating a single-cell suspension using favorable harvest conditions is absolutely essential to accomplishing that goal. Cell dissociation times, enzyme concentrations, and incubation temperatures are examples of parameters that should be optimized. Ideally, every microcarrier in suspension will have the same number of cells attached to its surface

in one to four hours after cells are seeded into a reactor. Although that is the ultimate goal, in practice a statistical distribution of cells on the microcarriers is inevitable.

The same parameters that are important to successful static cell culture are also required for implementing microcarrier-based adherent cell culture. Some environmental conditions and cell handling techniques that may not affect static cultures can positively or negatively influence microcarrier systems. Such parameters must be optimized in developmental studies. Cell attachment, spreading, and growth are the three most important physical processes required for successful microcarrier culture, and media components influence those processes in different ways. For example, high protein concentrations in cell culture media formulations can block or impede cell attachment to microcarriers (26). When that occurs, microcarrier attachment efficiency — the distribution of cells onto the microcarrier population — can be suboptimal, which leads to inefficient use of the available SA in the reactor.

Different microcarrier surface modifications also influence cell-attachment kinetics and efficiencies. Positive charges imparted onto microcarrier surfaces facilitate attachment of most cell types. Pall SoloHill Plastic Plus, FACT III, and Hillex II microcarriers have positively charged surfaces to which cells typically exhibit rapid attachment. Cell-adhesion molecules — such as collagen, fibronectin, laminin, and proteins or peptides that contain the Arg-Gly-Asp (RGD) attachment site — can enhance attachment efficiency and facilitate cell

Table 1: Characteristics of SoloHill microcarriers

Type Core MaterialAnimal-

Component Free? Charge? Relative Density Bead Diameter (µm)Surface Area

(cm2/g)FACT III Crosslinked polystyrene No Yes 1.02 and 1.04 90–150 and 125–212 480 and 360Collagen Crosslinked polystyrene No No 1.02 and 1.04 90–150 and 125–212 480 and 360Hillex II Modified polystyrene Yes Yes 1.11 160–180 515Hillex-CT Modified polystyrene Yes Yes 1.11 160–180 515Plastic Crosslinked polystyrene Yes No 1.02 and 1.04 90–150 and 125–212 480 and 360Plastic Plus Crosslinked polystyrene Yes Yes 1.02 and 1.04 90–150 and 125–212 480 and 360ProNectin F Crosslinked polystyrene Yes Yes 1.02 and 1.04 90–150 and 125–212 480 and 360Glass Crosslinked polystyrene Yes Yes 1.02 and 1.04 90–150 and 125–212 480 and 360

Table 2: Continuous passages on SoloHill Plastic microcarriers in spinner culture; six consecutive passages on microcarriers demonstrate the ability to expand MSCs continuously without decreasing maximal confluent density or doubling time.

Passages 1 2 3 4 5 6Seeding Density (×104 cells/cm2) 0.3 2.0 1.0 0.3 0.3 0.3Harvest Density (×104 cells/cm2) 4.6 3.3 2.7 3.6 4.3 4.5Days of Growth 8 5 5 7 8 8Number of Doublings 4.0 <1.0 1.3 3.6 3.8 3.9

Page 4: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

60 BioProcess International 12(3) March 2014

spreading. Pall SoloHill ProNectin F, Collagen, and FACT III microcarriers are all coated with cell-adhesive molecules. Such coatings facilitate attachment of fastidious cells, promoting an environment that is favorable for cell growth.

Pall SoloHill microcarriers are made of rigid, modified-polystyrene spherical cores, with each different type involving unique surface modifications. They come in a range of sizes and relative densities (1.02–1.10), which can be beneficial for distinct applications and cell types. The rigid properties of these microcarriers ease cell harvesting and serial passaging and facilitate subsequent three- or four-step scale-up through bead-to-bead transfer. Such properties are critical when cells are final products. Table 1 describes important characteristics of the eight different types of commercially available microcarriers from Pall SoloHill. All can be gamma irradiated (Figure 1) without loss of function (27). That is an important property providing the opportunity to supply sterile microcarriers in bags for direct connection and easy transfer into single-use bioreactors.

Microcarrier-to-microcarrier cell expansion in closed-system, single-use

bioreactors represents an attractive manufacturing platform (Figure 2). This can be accomplished either by using a bioreactor seed train of increasing size or by increasing SA within a single reactor through addition of fresh media and microcarriers. Implementing such systems requires multiple conditions to be met: First, cells that retain therapeutic properties must propagate on microcarriers for multiple passages. Second, the cells must either be harvestable and transferrable to a larger reactor containing new microcarriers, or they must be capable of directly migrating to freshly added beads in an existing reactor. Conditions optimized in small-scale vessels also must be scalable to larger production formats. Studies using small-scale spinners have demonstrated the feasibility of Pall SoloHill microcarriers for propagation of hMSCs over multiple passages (Table 2).

Large numbers of hMSCs can be readily harvested from Pall SoloHill microcarrier types while retaining high viability (Table 3). At small volumes, cells can be separated from microcarriers using cell strainers or by allowing microcarriers to settle and decanting the culture supernatant. Systems for separating viable cells

from microcarriers at larger volumes are under development, and at least one commercially available solution has been recently introduced. Pall SoloHill has demonstrated feasibility of using a cell-separation bag: a sterile bag containing a 70-µm screen. In that system, a slurry of microcarriers and dissociated cells are unidirectionally pumped through a separation bag, in which cells are liberated to the medium and f lushed into the next vessel through sterile connections and microcarriers are retained in the bag. Applications of this device have demonstrated its ability to efficiently harvest ASCs as a single-cell suspension from SoloHill’s rigid microcarriers (Photos 2).

Thermo Fisher Scientific has also recently introduced a cell-harvesting device. The HyQ Harvestainer system was designed for separating microcarriers from anchorage-dependent mammalian cells and could be beneficial for such purposes at manufacturing scale.

microcArriers For stem cell exPAnsion

Pall SoloHill and General Electric (GE Healthcare) spherical microcarriers have been used as substrates to grow a range of adherent stem cell types (29, 30). Corning has released microcarriers that appear to support stem cell growth under specific conditions (31). Other commercially available nonspherical microcarrier types also may be used for cell growth. Macroporous microcarriers such as Cytoline (GE Healthcare) and Cultisphere (PerCell Biolytica AB) brands are also being evaluated with stem cells. The ability to harvest

Photos 2: Cell and microcarrier slurries are passed through a bag and microcarriers are retained on a screen within it so single-cell suspension can be used to seed next reactor; microscopic images of microcarrier/cell slurry before passing through through (left), microcarriers devoid of cells retained within the bag (middle), and single-cell suspension obtained in flow-through (right).

Table 3: Efficient harvest of cells from Pall SoloHill microcarriers (see Photos 2, above)

ExperimentTotal Nuclei Before

TrypsinTotal Cells

After Trypsin Recovery (%)MSC1201-Collagen 8.78 × 108 5.9 × 108 67MSC1301-Collagen 1.25 × 109 8.98 × 108 72MSC1303-Collagen — 6.3 × 108 —MSC-Hillex II 5.9 × 106 5.0 × 106 84MSC-Plastic 5.2 × 106 4.6 × 106 88

Page 5: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

healthy stem cells from microcarriers for therapeutic purposes is absolutely critical. Even though a number of microcarrier types support cell growth, it can be difficult to efficiently liberate and separate viable cells from them (32). The process should be optimized before transitioning to larger-scale reactors.

Results obtained in a number of studies have demonstrated that human MSCs grow extremely well on Pall SoloHill microcarriers (Figure 3) (32). After expansion with serum-

containing medium in small-scale spinners at volumes of 125–200 mL, cells retain their identity and reach acceptable densities (33, 34). Similar results have been obtained using larger glass and disposable reactors, in which hMSCs have been expanded and harvested from Collagen microcarriers at 2-L volumes (Figure 3).

Distinct cell types will behave differently when environmental conditions are changed. A microcarrier that supports cell growth

in serum-containing medium may not be optimal for use under chemically defined conditions. Therefore, it is important to determine the best cell–microcarrier media combination for growth at small scale before transitioning to large-scale production.

streAmlining Process develoPment Minimizing costs and shortening timelines are goals for developing all therapeutic manufacturing processes.

Figure 3: (left) Nuclei counts show growth of hMSCs on five different types of SoloHill microcarriers in spinner cultures. Data are presented as means ± SEM (n = 3). (right) Growth curves of hMSC grown on SoloHill Collagen-coated microcarriers in bioreactor and spinner control cultures.

Hillex II

Collagen

Plastic

Plastic Plus

Pronectin F

Bioreactor

Spinner Control

14

12

10

8

6

4

2

0

14

12

10

8

6

4

2

00 2 4 6 8 10 0 2 4 6 8

Days of Growth Days of Growth

Nuc

lei/c

m2 (×

104 )

Nuc

lei/c

m2 (×

104 )

w

BioProcessI n t e r n a t I o n a l

FeatUreD Posters From BPi’s Poster HaLL sUPPLement

BioProcess

In

te

rn

at

Io

na

l

Downstream

Processing

7

Linear Flow Rate (cm/h)

Pressure (MPa)

800700600500400300200100

0

0.05

0.10

0.15

0.20

0.25

0.30

0

KANEKA KanC

apATM

KAN

EKA K

anCapA™

is a powerful tool to im

prove your mAb purification

platform. K

ANEK

A’s unique combination of a proprietary recom

binant alkaline

stable Protein A and a highly cross-linked cellulose base matrix m

eets industrial

requirements for higher perform

ance resins, high binding capacity, high alkaline

and chemical stability for C

IP, mild acidic elution pH

, reduced non-specific

binding, and predictable scalability with good pressure flow

characteristics.

Alkaline CIP w

ith sodium hydroxide is a robust cleaning and sanitization step for

chromatography resins. KanC

apA has excellent alkaline stability that can be used for up to

300 cycles with 0.1 M

sodium hydroxide as C

IP solution for 15 minutes of contact tim

e with only

limited loss of binding capacity (~20%

). In addition, 0.5 M sodium

hydroxide can be used for up to

100 cycles. Elution yields are stable. Protein A leaching does not increase during cycle use.

Since alkaline CIP can elim

inate the need for urea or guanidine-HC

l, the handling costs of using

environmentally unfriendly and corrosive reagents are significantly reduced w

ith KanCapA.

Conclusion

Flow packing

Axial compression

Flow packing

Flow packing

Axial compression 4.4

7103045

200199201200233

5,710

6,063

5,276

5,208

4,712 1.141.061.181.171.09

Test Conditions

Sample: 1%

(v/v) acetone

Injection vol.: 1% of colum

n volume

Flow rate: 60 cm

/h

Packing method

I.D. (cm

)H

eight (mm

)Plates/m

Asym

metry

Kazunobu M

inakuchi, Masahiro Funaki, H

iroaki Kaw

asaki, Alan W

alker, Francesco Liotino and Dirk H

oegaerts

Dynam

ic binding capacity (DB

C) is an im

portant parameter w

hen selecting a

chromatography resin and is related to productivity and production cost. KanC

apA achieves

high productivity at a residence time of 4 to 6 m

inutes.

KANEKA KanC

apA™ dem

onstrates an overall high performance in the m

Ab

capture step, making it an indispensable tool for your m

Ab purification platform.

4High Flow

Rate Operation and Easy Scale Up from Pilot to Process

3High Binding Capacity

2M

ild pH Elution in Narrow Range

1Alkaline Stability and Long Life Cycle

Novel Protein A Ligand

Base Matrix

The elution profile of a Protein A column at the industrial scale is one of the m

ost critical

factors. For example, the VH

3-encoded mAbs require a low

elution pH due to an additional

Protein A binding site in the Fab region. It is well know

n that lower pH

elution leads to higher

aggregate formation. KanC

apA Protein A ligand does not have the additional Fab binding

site and can elute all types of mAb over narrow

pH range.

Figure 4 shows the im

proved elution profile for the VH3-encoded m

Ab. KanCapA show

s a

sharp elution peak even at pH 3.5. KanC

apA makes it possible to elute all types of IgG

s using

mild acidic conditions and sim

plifies the process development for a m

Ab purification platform.

Figure 6 and Table 1 show the pressure/flow

rate characteristics and packing efficiency of

packed columns, from

4.4 cm to 45 cm

I.D. and 20 cm

bed height. A 10% glycerol solution

for 45 cm I.D

. column sim

ulates viscous cell culture feed stock, and shows a reasonable

pressure increase. KanCapA can be packed by norm

al flow and axial com

pression packing

methods from

pilot to large scale. The columns show

excellent pressure/flow rate

characteristics with good colum

n performance.

Introduction

A New

mAb Purification Platform

Figure 5. Residence tim

e dependency of dynamic binding capacity Table1. P

acking efficiency of the packed columns evaluated by pulse injection of 1%

acetone

Figure 4. Elution profiles of KanC

apA com

pared with com

mercially available P

rotein A resins. 5 m

g/mL-

resin of IgG is loaded and elution is perform

ed at pH 3.5 and 3.0. S

trip solution is 1 M A

cetic acid.

A280

5% DBC (mg/mL-resin)

Residence Tim

e (minutes)

60

50

40

30

20

10

0

2

4

6

8

10

0

Figure 6. Pressure/flow

rate characteristics of KanC

apA packed into various colum

n sizes. The pressures

generated by packed beds are calculated by subtracting the system pressure from

total pressure.

Polyclonal human IgG

Volume

A280

mA

b B

Volume

ELUTION

STRIP

A280

Polyclonal human IgG

Volume

A280

mA

b B

Volume

ELUTION

STRIP

ELUTION

STRIP

ELUTION

STRIP

A280

mA

b A (VH

3 subfamily)

Volume

ELUTION

ELUTION

STRIP

A280

mA

b A (VH

3 subfamily)

Volume

Figure 3. Life cycle study; Rem

aining 5% dynam

ic binding capacity after repeated alkaline CIP w

ith 0.1 M or 0.5 M

NaO

H (left); Yield and Protein A ligand leaching in the cycle use study w

ith 0.1 M N

aOH

(right). Contact tim

e to

NaO

H in all experim

ents is 15 minutes. Ligand leaching less than the detection lim

it (1 ppm) is plotted as 1 ppm

.

Remaining Binding Capacity (%)

Cycle N

umber

0

100

10080604020

0

200

300

Yield (%)

Ligand Leaching (ppm of IgG)

Cycle N

umber

0

100

100

50

80

40

60

30

40

20

20

10

0

0

200

300Y

ield

Ligand leaching

0.1 M N

aOH

0.5 M N

aOH

KanC

apA ligand is a pentamer of the m

utated C dom

ain of Protein A. It has high

alkaline stability and diminished Fab binding.

The C dom

ain of Native Protein A binds to the Fc region of an antibody, but also binds

to the Fab region, especially to the VH3 subfam

ily of mAbs. This type of binding requires a

more acidic pH

for elution. Using com

puter-aided molecular design, KAN

EKA has created a

novel Protein A ligand that improves not only alkaline stability but also the elution profile.

Our cellulose base m

atrix has superior non-specific binding

characteristics when com

pared to other matrices, polym

ers or

glass. Cellulose is biocom

patible and has been used for many years

in the plasmapheresis and dialysis m

edical device fields. KanCapA

uses cellulose beads produced using innovative cross-linking

technology. This technology has allowed us to develop a resin that is

easy-to-use, durable and applicable to large-scale operations.Figure 1. S

chematic representation of K

AN

EKA’s new

Protein A

ligand construction

Figure 2. Scanning electron

microscope im

age of highly

cross-linked cellulose Elution

at pH 3.5

Elution

at pH 3.0

STRIP

Polym

er

Glass

Agarose

KanC

apA

Polym

er

Glass

Agarose

KanC

apA

7 cm I.D

. x 20 cm height (w

ater)

10 cm I.D

. x 20 cm height (w

ater)

30 cm I.D

. x 20 cm height (w

ater)

45 cm I.D

. x 23 cm height (w

ater)

45 cm I.D

. x 23 cm height (10%

glycerol)

4.4 cm I.D

. x 20 cm height (w

ater)

KanC

apA

Agarose

Polym

er

Glass

http://ww

w.fcd.kaneka.co.jp/biobusiness/kancapa/

Kaneka P

harma E

urope N.V.

Fine Chem

icals Division Triom

flaan 173 1160 Brussels, B

elgium

[email protected]

KAN

EK

A C

OR

PO

RATIO

N

QO

L Division 2-3-18, N

akanoshima, K

ita-ku, Osaka 530-8288, Japan

[email protected]

Kaneka A

mericas H

olding, Inc.

Fine Chem

icals Division 546 Fifth Avenue, 21st Floor N

ew York, N

Y 10036

[email protected]

Contact Inform

ation

KAN

EKA and the K

ANEK

A logo are trademarks of K

ANEK

A. KAN

EKA K

anCapA

TM is a trademark of K

ANEK

A.

Native Protein A

Ligand

Fab

FcU

ndesired

binding

Major

binding

Major

binding

Mutation

Multim

erization

KA

NEK

A Protein A

Ligand

ED

AB

C

C ,C ,

C ,

C ,C ,

C ,

Fc

Audio Presentation Available:

ww

w.bioprocessintl.com

/posters/KANEKA_KanCapA

BPH_November_2012_Kaneka.indd 7

10/24/12 9:17:58 AM

BioProcessI n t e r n a t I o n a l

P o s t e r H a l l 2 0 1 2 - 2 0 1 3P o s t e r H a l l 2 0 1 2 - 2 0 1 3P o s t e r H a l l 2 0 1 2 - 2 0 1 3P o s t e r H a l l 2 0 1 2 - 2 0 1 3P o s t e r H a l l 2 0 1 2 - 2 0 1 3

A CompilA CompilA CompilAAAtion of tion of tion of Ation of AAAtion of Ation of Ation of AAAtion of A ppprororoCCCess ess ess ttteeeCCChnologies hnologies hnologies AAAnd nd nd eeexpertise xpertise xpertise pppresented in resented in resented in ppposter oster oster ffformormormAAAtttAtAAAtAtAtAAAtAsupplement to BIosupplement to BIosupplement to BIoppprocess rocess rocess IIInternatIonal novemnternatIonal novemnternatIonal novemBBBer 2012er 2012er 2012

tm

Available Now Anytime, Anyplace on the BPI Website.Available Now Anytime, Anyplace on the BPI Website.

interactive Poster Hallsee, Hear, experience 50+ on-Demand Poster Presentations

tm

www.bioprocessintl.com/posters

The Importance of Thresholding in Imaging Analysis of Protein Aggre-gates (Fluid Imaging Technologies, Inc.)

Enhancing E� ciency and Economics in Process Development and Quality Control of Biotherapeutics (ForteBIO, A Division of Pall Corporation)

Transfer of Hepatic Progenitor Stem Cell Culture Process From Multitray Stacks to the Integrity® Xpansion™ Multiplate Biorector (ATMI LifeSciences, Promethera BioSciences)

Expansion of T-cells Using Xuri™ Cell Expansion System W25 and WAVE Bioreactor 2/10 System(GE Healthcare Life Sciences)

Aggregate Removal From Monoclo-nal Antibody With Nuvia™ HR-S (Bio-Rad Laboratories)

Next Generation Depth Filters for the Clari� cation of Flocculated Mamma-lian Cell Culture (EMD Millipore)

Liquid-Liquid Porometry of Vire-solve® Pro Membrane (EMD Millipore)

A Case Study: 3-Step Process for E� cient mAb Puri� cation Using Dif-ferent Commercially (EMD Millipore)

Scalable Method for Packing Chro-matography Columns (EMD Millipore)

Platform Puri� cation of a Domain Antibody (GE Healthcare Life Sciences)

Progress on a Fully Disposable Down-stream Platform: A Simple, Risk-Free, Plug-in Solution to Solve the DSP Bottleneck (Natrix Separations, Inc.)

Semi-automated, Single-use TFF Systems With an ‘Open Architecture’ Design Maximize Flexibility and Allow Supply Chain Security (Parker Domnick Hunter)

Sartobind® pico and Sartobind® nano on Akta® - Optimizing Conditions for Liguid Chromatograpy Systems (Sartorius Stedim Biotech)

Viral Vector Production in the Integ-rity® iCELLis® Disposable Fixed-bed Bioreactor From Bench-Scale to Industrial Scale (ATMI)

Microbial Cultivation in Di� erent Scales in the CELL-tainer® Rocking Single-Use Bioreactor(Charter Medical)

A Systematic Strategy of Cell Culture Media and Feed Development (FujiFilm Diosynth Biotechnologies)Continuous Bioprocessing: A CMO’s Perspective (Lonza)

Maximizing Protein Expression in CHO Suspension Cells Through Tran-sient Transfection (Mirus Bio LLC)

Rapid Antigen Production in Pseu-domonas � uorescens Utilizing a High-throughput, Parallel Processing Approach (Pfenex)

Poster Hall Half 2014-02.indd 1 1/22/14 5:35 PM

Page 6: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

Because cell therapies are living cells, they must overcome unique difficulties to achieve regulatory approval. Cellular identity and function must be defined by developing meaningful potency assays that predict the therapeutic properties of cells. Those attributes must be maintained as new processes are developed and adopted. Fortunately, many critical parameters needed for successful microcarrier culture can be identified and optimized through well-designed and highly targeted developmental efforts. Microcarrier concentration, cell-seeding density, enzymatic dissociation times and temperatures, optimal media conditions, and vessel stir speeds are some parameters that can be examined using small-scale stirred tanks.

Small-scale studies in static cultures and stirred vessels allow investigators to save on material costs and expedite development timelines. Initial cell, media, and microcarrier compatibility studies can be performed in static cultures. Although such cultures are of somewhat limited utility, those studies provide useful information about cell-

attachment kinetics and growth on different microcarrier types. Such studies are rapid and cost effective, and successful microcarrier–media combinations identified under static conditions then can be tested in small-scale stirred vessels.

Many groups use 100-mL to 500-mL reusable or disposable vessels to perform initial screening studies. Bellco Glass and Corning both sell reusable glass spinner vessels that are cost effective options for these studies. Corning has recently introduced a line of small-scale, plastic, disposable stirred reactors that range 100–300 mL in working volume. Those single-use reactors can be used to expedite developmental timelines if costs are not a consideration or if cleaning vessels and autoclaving becomes burdensome. Conditions such as microcarrier concentrations, seeding densities, media formulations, and minimal stir speeds can be identified using small-scale platforms.

Those parameters are typically representative of conditions that will be favorable to cell expansion in larger

bioreactors. However, scaling to larger vessels is a critical component of the developmental process that should not be overlooked. Processes such as fluid transfer or cell harvesting are routinely performed at laboratory scale, and engineering expertise is required to identify suitable methods for effectively performing them at larger scales.

Promising AdvAncements Several recently introduced small-scale multiplexing experimental systems could provide a suitable platform to accelerate microcarrier-based cultures and decrease production costs. Global Cell Solutions offers a programmable, eight-position stirrer called the Biowiggler. Each magnetically driven position on this device can be independently programmed for continuous or intermittent stirring in a working volume of 5–45 mL. Other potentially useful systems include the DASBox system from Eppendorf, Applikon’s Micro-Matrix bioreactor, the ambr microbioreactor from TAP Biosystems, and Pall’s Micro-24 MicroReactor system. The latter is a

CREATING TOMORROW’S SOLUTIONS

DISCOVER EXPERTISE IN A NEW SCALE

WACKER, the microbial CMO, has now doubled its capacity for bioprocess development and manufacturing with the addition of an EMA/FDA inspected 1,500L manufacturing line. We round out our contract manufacturing services with unique E. coli technologies like the ESETEC® secretory system (best technologyfor Fab production) and a matrix-based screening technology for protein refolding – www.wacker.com/biologics

Wacker Biotech GmbH, Jena, Germany, Tel. +49 3641 5348-150, [email protected] visit our centennial website at www.wacker.com/100years

SCIL

Pro

tein

s Production

Wacker Bi o

tech

THE MICROBIALCMO

209,55x134,1_Anzeige_Biotech_110214-k_RZ.indd 1 11.02.14 10:31BPI_Mar_Wacker_Rev.indd 1 2/12/14 9:56 AM

Page 7: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

compact solution for efficient cell-line evaluation and process development (35). It runs up to 24 simultaneous bioreactor experiments with independent control and monitoring of each reactor’s gas supply, temperature, and pH at working volumes of 3–7 mL. All these systems can be operated at low volumes, making them potentially cost-effective options for initial development studies. Determining the compatibility of such systems with microcarrier processes — and whether they will generate results that are directly translatable to larger vessels — is becoming increasingly important.

Numerous examples of successful cell therapies are beginning to emerge, and more clinical trials using cells are being initiated. This signals an exciting time in the fields of cellular therapy and regenerative medicine. New tools and innovations in cell culture, molecular biology, manufacturing techniques, and SUTs are providing the necessary enabling technologies for expediting developmental efforts to meet the demand for the large cell numbers that will be required to treat expected patient populations. Microcarriers coupled with single-use bioreactors represent an attractive platform for these promising therapies.

reFerences1 Brooke G, et al. Therapeutic Applications of Mesenchymal Stromal

Cells. Semin. Cell Dev. Biol. 18, 2007: 846–858.2 Bunnell BA, et al. Adipose-Derived Stem Cells: Isolation, Expansion

and Differentiation. Methods 45, 2008: 115–120.3 McNiece I. Delivering Cellular Therapies: Lessons Learned from Ex

Vivo Culture and Clinical Applications of Hematopoietic Cells. Semin. Cell Dev. Biol. 18, 2007: 839–845.

4 Rowley J, et al. Meeting Lot Size Challenges of Manufacturing Adherent Therapeutic Cells. BioProcess Int. 10(3) 2012: S16–S22.

5 Bunnell BA, et al. Adipose Derived Stem Cells: Isolation Expansion Differentiation. Methods 45(2) 2008: 115–120.

6 Friedenstein AJ, Chailakhjan RK, Lalykina KS. The Development of Fibroblast Colonies in Monolayer Cultures of Guinea-Pig Bone Marrow and Spleen Cells. Cell Tiss. Kinet. 3, 1970: 393–403.

7 Friedenstein AJ, Piatetzky S, Petrakova KV. Osteogenesis in Transplants of Bone Marrow Cells. J. Embryol. Exper. Morphol. 16, 1966: 381–390.

8 Pittenger MF, et al. Multilineage Potential of Adult Human Mesenchymal Stem Cells. Science 284, 1999: 143–147.

9 Pittenger MF, Martin BJ. Mesenchymal Stem Cells and Their Potential As Cardiac Therapeutics. Circul. Res. 95, 2004: 9–20.

10 Zuk PA, et al. Multilineage Cells from Human Adipose Tissue: Implications for Cell-Based Therapies. Tiss. Eng. 7, 2001: 211–228.

11 Sarugaser R, et al. Human Umbilical Cord Perivascular (HUCPV) Cells: A Source of Mesenchymal Progenitors. Stem Cells 23, 2005: 220–229.

12 Hong SH, et al. In Vitro Differentiation of Human Umbilical Cord Blood–Derived Mesenchymal Stem Cells into Hepatocyte-Like Cells. Biochem. Biophys. Res. Commun. 330, 2005: 1153-1161.

13 Moon YJ, et al. Expression Profile of Genes Representing Varied Spectra of Cell Lineages in Human Umbilical Cord Blood-Derived Mesenchymal Stem Cells. Acta Haematologica 114, 2005: 117–120.

14 Miura M, et al. SHED: Stem Cells from Human Exfoliated Deciduous Teeth. PNAS 100, 2003: 5807–5812.

15 Andreeff M, et al. Chapter 2: Holland-Frei Cancer Medicine. Cell Proliferation, Differentiation and Apoptosis, 5th Edition. Bast RC Jr., et al., Eds. BC Decker: Hamilton, ON, Canada, 2000.

16 Brandenberger R, et al. Cell Therapy Bioprocessing: Integrating Process and Product Development for the Next Generation of Biotherapeutics. BioProcess Int. 9(3) 2011: S30–S37.

Aeras Contract ManufacturingAccelerating the Development of Vaccines and Biologics

AERAS-CMO.COM · [email protected]

Proven Capabilities.

Flexible & Responsive Service.

Aeras Gets Results.

CELL

BA

NK

ING

cG

MP

MA

NU

FAC

TU

RIN

G

QU

ALIT

Y C

ON

TR

OL

PROCESS DEVELO

PMENT

FIL

L /

FIN

ISH

BPI_Jan2014_Aeras.indd 1 12/12/13 12:37 PM

Page 8: Single-Use Bioreactors and Microcarriers · bioreactors and microcarriers are realized. Photo 1: Pall’s XRS-20 rocking incubator functions through biaxial agitation (rocking motion

17 Kirousac D, Zanstra P. The Systematic Production of Cells for Cell Therapies. Cell Stem Cell 9, 2008: 369–381.

18 Caplan A. Why Are MSCs Therapeutic? New Data: New Insight. J. Pathol. 217, 2009: 318–324.

19 Deans R. Bringing Mesenchymal Stem Cells into the Clinic. Emerging Technology Platforms for Stem Cells. Lakshmipathy U, Chesnut JD, Thyagarajan B, Eds. John Wiley and Sons: Hoboken, NJ, 2009; 463–481.

20 Simaria AS, Hassan, et al. Allogeneic Cell Therapy Bioprocess Economics and Optimization: Single-Use Cell Expansion Technologies. Biotechnol. Bioeng. 111(1) 2013: 69–83.

21 van Wezel AL. The Large-Scale Cultivation of Diploid Cell Strains in Microcarrier Culture: Improvement of Microcarriers. Dev. Biol. Stand. 37, 1976: 143–147.

22 van Wezel A, van Steenis G. Production of an Inactivated Rabies Vaccine in Primary Dog Kidney Cells. Dev. Biol. Stand. 40, 1978: 69–75.

23 Mered B, et al. Propagation of Poliovirus in Microcarrier Cultures of Three Monkey Kidney Cell Lines. J. Biol. Stand. 9(2) 1981: 137–145.

24 Clementschitsch F, Bayer K. Improvement of Bioprocess Monitoring: Development of Novel Concepts. Microb. Cell Fact. 5(19) 2006.

25 Justice C, et al. Online- and Off line Monitoring of Stem Cell Expansion on Microcarrier. Cytotechnol. 63, 2011: 325–335.

26 Application Note APP-007. Mesenchymal Stem Cells Expanded on SoloHill Microcarriers in Millipore CellReady Bioreactor. SoloHill Engineering: Ann Arbor, MI; www.solohill.com/files/app-007a_mscs_expanded_on_solohill_microcarriers_in_millipore_cellready_bioreactor.pdf.

27 Greenway S, unpublished results.28 Patel G, unpublished results.29 dos Santos F, et al. Toward a Clinical-

Grade Expansion of Mesenchymal Stem Cells from Human Sources: A Microcarrier-Based Culture System Under Xeno-Free Conditions. Tissue Eng. Part C Meth. 17(12) 2011: 1201–1210.

30 Phillips B, et al. Attachment and Growth of Human Embryonic Stem Cells on Microcarriers. J. Biotechnol. 138, 2008: 24–32.

31 Hervy M, Pecheul M, Melkoumian Z. Long Term Culture of Human Mesenchymal Stem Cells on Corning Synthemax II Microcarriers in Xeno-Free Conditions. Corning Inc.: Corning, NY, 2012. http://catalog2.corning.com/Lifesciences/media/pdf/poster_hMSC%20Mesencult_BPI%202012_Hervy.pdf.

32 Kehoe D, et al. Scale-Up of Human Mesenchymal Stem Cells on Microcarriers in Suspension in a Single-Use Bioreactor. BioPharm Int. 25(3) 2012: 28–38.

33 Application Note 005-C. SoloHill Microcarriers for Mesenchymal Stem Cell

Expansion. SoloHill Engineering: Ann Arbor, MI; www.solohill.com/files/app-005c_-_solohill_microcarriers_for_mesenchymal_stem_cell_expansion.pdf

34 Goltry K, et al. Scalable Microcarrier-Based Ex Vivo Expansion of Stem/Progenitor Cells (poster). World Stem Cell Summit: Baltimore MD, 2009.

35 Choi K, Carstens JN, Heimfeld S. T-Cell Suspension Culture in a 24-Well Microbioreactor. BioProcess Int. 11(4) 2013: 40–46. •

Corresponding author Mark Szczypka is senior director of applications and new product development, David Splan is a senior scientist, and Heather Woolls is a scientist, all at Pall SoloHill in Ann Arbor, MI 48108; 1-734-973-2956; [email protected]. And Harvey Brandwein is vice president of business development at Pall Life Sciences.

For electronic or printed reprints, contact Rhonda Brown of Foster Printing Service, [email protected], 1-866-879-9144 x194. Download personal-use–only PDFs online at www.bioprocessintl.com.

Contract Manufacturing Excellence

Visit our new website to fi nd out more, take a virtual tour and arrange your meeting with our expert team.

Please visit our website to arrange a tour: www.cobrabio.com

BPI_Mar_Cobra.indd 1 2/18/14 2:22 PM