SINGLE STAGE CYLINDER REGULATORS UNICONTROL
4
EDITION 1/2014 SINGLE STAGE CYLINDER REGULATORS UNICONTROL • UNICONTROLs are pressure regulators fully conforming to all paragraphs of International Standard ISO2503 • The main focus during product design and manufacture was on providing excellent performance, robustness and durability and guaranteeing its uncompromised safety. • The UNICONTROL regulators use a filter protected fully encapsulated valve, well proven over several generations of GCE regulators. • The body is made of solid forged, high quality brass, polished and chemically stabilized. • The zinc die-cast bonnet is protected by a double layer powder painting to providing a guarantee corrosion resistance even in very aggressive environments. • For operational safety the intergrated Pressure Relief Valve, located on the rear of the body is designed to prevent end users from changing the factory setting. • These regulators are independently type-tested and certified by BAM Berlin (The German State Testing Institute).
Transcript of SINGLE STAGE CYLINDER REGULATORS UNICONTROL
EDITION 1/2014
SINGLE STAGECYLINDER REGULATORS
UNICONTROL
•UNICONTROLs are pressure regulators fully conforming to all paragraphs of International Standard ISO2503
•The main focus during product design and manufacture was on providing excellent performance, robustness and durability and guaranteeing its uncompromised safety.
•The UNICONTROL regulators use a filter protected fully encapsulated valve, well proven over several generations of GCE regulators.
•The body is made of solid forged, high quality brass, polished and chemically stabilized.
•The zinc die-cast bonnet is protected by a double layer powder painting to providing a guarantee corrosion resistance even in very aggressive environments.
•For operational safety the intergrated Pressure Relief Valve, located on the rear of the body is designed to prevent end users from changing the factory setting.
•These regulators are independently type-tested and certified by BAM Berlin (The German State Testing Institute).
UNICONTROL
DIMENSIONS SCHEME
REGULATOR PARAMETERS
TECHNICAL DATABody Forged Brass, chemically stabilized (acid bright dipped)Bonnet Die-cast Zinc alloy, chemically stabilized and powder paintedDiaphragm Diam. 55 mm fabric-reinforced EPDM rubberEncapsulated Valve Brass body sealed by PA or high-grade chloroprene rubberPressure Gauges Non-bulkhead 63 mm gauges, class 2,5%, scale calibrated in BarInlet Stem & Nut Brass, geometry complying with BS-341 standardSafety Valve Non-adjustable, plastic housingControl elements Ergonomic PA control knob, captive pressure adjusting screw
PRODUCT FEATURES
Corrosion resistant die-cast Bonnet
Safety valve located on rear side of body – non adjustable for operational safety
Bonnet powder-painted for corrosion resistance
Max. Outlet pressure locked for operation safety
Non-detachable Ergonomic Plastic control knob
Colour Coded Control Elements
Clear & Precise 63 mm Gauges
Technical Data permanently marked on rear side of the body
Inlet Connections exactly complying with BS-341 Standards
Body forged from high-quality Brass
UNICONTROL
REGULATOR PARAMETERS
The capacity graphs show the outlet pressure as a function of the flowrate at different inlet pressures.
OXYGEN ACETYLENE
REGULATORS - BOTTOM ENTRYArt.Nr. Gas GaugesInlet Outlet Inlet Outlet Flow (bar) (bar) (form) (form) m3/h0783651 Oxygen 0 300 10 G 5/8” (BS3) G 3/8” 54 0783650 Oxygen 2 300 4 G 5/8” (BS3) G 3/8” 210783652 Oxygen 2 300 10 G 5/8” (BS3) G 3/8” 54 0783641 Acetylene 0 25 1,5 G 5/8 LH (BS4) G 3/8 LH 14 0783640 Acetylene 2 25 1,5 G 5/8 LH (BS4) G 3/8 LH 14 0783656 Propane 0 25 4 G 5/8 LH (BS4) G 3/8 LH 15 0783644 Argon 2 300 4 G 5/8” (BS3) G 3/8” 19 0783645 Argon 2 300 Flow 0-15 LPM G 5/8” (BS3) G 3/8” 15 LPM 0783647 Argon 2 300 Flow 0-50 LPM G 5/8” (BS3) G 3/8” 50 LPM 50530 Mapp 0 small cylinders small cylinders G 1/4 LH G 1/4 LH
REGULATORS - SIDE ENTRYArt.Nr. Gas GaugesInlet Outlet Inlet Outlet Flow (bar) (bar) (form) (form) m3/h0783653 Oxygen 2 300 4 G 5/8” (BS3) G 3/8” 54 0783655 Oxygen 2 300 10 G 5/8” (BS3) G 3/8” 21 0783654 Oxygen 2 300 10 CGA 540 9/16”×18 54 0783643 Acetylene 2 25 1,5 G 5/8 LH (BS4) G 3/8 LH 14 0783642 Acetylene 2 25 1,5 CGA 300 9/16”×18LH 14 0783648 Argon 1 300 4 G 5/8” (BS3) G 3/8” 19 0783649 CO2* 2 200 4 0,860×14TPI (BS8) G 3/8” 20
* for CO2 regulators use heaters above 30 l/m.
UNICONTROL RANGE
50530
0783643
0783652
0783656
0783651
www.gcegroup.com
GCE Group is one of the world’s leading companies in the field of gas control equipment. The headquarters are in Malmö, Sweden, and the two major supply units are located in Europe and Asia.The company operates 15 subsidiaries around the world and employs more than 850 people. GCE Group includes four business areas – Cutting & Welding, Process Applications, Medical and High Purity.Today’s product portfolio corresponds to a large variety of applications, from single pressure regulators andblowpipes for cutting and welding to sophisticated gas supply systems for medical and electronics industry applications.
UNITEDKINGDOM&IRELANDGCELtd
Yew Tree Way, Stone Cross ParkGolborne, Warrington
WA3 3JD
Phone: +44 (0)1942 29 29 50Fax: +44 (0)1942 29 29 77
Art
. Nr.
7351
0000
0852
. Edi
tion
1/20
14. A
ltera
tions
are
sub
ject
to c
hang
e w
ithou
t not
ice.
170
7201
4ej ©
201
4
