Single-Hung Windowsc2456372.r72.cf0.rackcdn.com/1953/JW_Win_Vinyl_Prem_SH_Sizing… · Note:...
32
Architectural Detail Manual July 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-1 TABLE OF CONTENTS Specifications ........................................................... 3-2 Quick Spec Guide ....................................................... 3-3 Elevations/Sizes: 1/4” Scale Single-Hung Side Load ............................................... 3-4 2 Wide Single-Hung Side Load ......................................... 3-10 3 Wide Single Hung Side Load with Center Picture ........................ 3-14 Sash Glazing Options: 3” Scale ............................................ 3-18 Grilles & SDL Lite Patterns ................................................ 3-19 Section Details: 4” Scale ................................................. 3-20 Premium Vinyl Single-Hung Windows
Transcript of Single-Hung Windowsc2456372.r72.cf0.rackcdn.com/1953/JW_Win_Vinyl_Prem_SH_Sizing… · Note:...
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-1
TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Quick Spec Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Elevations/Sizes: 1/4” Scale
Single-Hung Side Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
2 Wide Single-Hung Side Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
3 Wide Single Hung Side Load with Center Picture . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Sash Glazing Options: 3” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Grilles & SDL Lite Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
Section Details: 4” Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
Premium Vinyl
Single-Hung Windows
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-2
PRODUCT SPECIFICATIONS
MATERIALS
Extruded vinyl profiles comply with the performance requirements ofAAMA 303-97. Colors are White and Desert Sand. Available in theWest.
FRAME
All frames are assembled utilizing fusion-welded technology foradded strength and durability. Frame jamb depth is 3-1/4“(82.55mm), and the exterior wall thickness is 0.070 of an inch.Reinforcement is used in the meeting rail and a sash horizontal.Frames come standard with integral nailing fin that can be easilyremoved for replacement purposes. An optional integral dual-wallFlush Fin is available for some retrofit applications.
SASH
Sash is 1-1/4” (nominal) or (32.39mm) thick, and is assembled utilizingfusion-welded technology for added strength and durability.
GLAZING
3/4” (19mm) insulating glass consists of two lites of glass sealedaround a spacer. All insulating glass units comply with theperformance requirements of the IGCC in accordance with eitherASTM E774 or E2190.
GLAZING OPTIONS
3/4” (19mm) insulated glass available in clear, Low-E, tinted, obscure,or other specialty insulating glass as specified. All glass is availabletempered.
WEATHER-STRIPPING
Fin-pile weather-strip applied along full perimeter of operating sash.
HARDWARE
Exclusive WEN-Lockt with visible latch indicator or a single actioncam style lock is available on all windows. Block and Tackle balancesystems are utilized to support the vertical operation of the sash.Take out clips are secured into the interior jamb of the sash pocketand should remain flat for correct operation.
INSECT SCREENS
Optional fiberglass charcoal color insect screen in an aluminum frameto match the color of the unit. Insect screens are intended to allowair and light in and to keep insects out. They are not intended to keepanyone or anything from falling through an open door or window.For safety screens or other security devices contact your local buildingsupply retailer.
GRILLES
SDL (Simulated Divided Lite) - 7/8“ (23mm), 1-1/8“ (29mm), 1-3/8“(35mm), or 2-1/8” (58mm) contour grilles surface mounted on theexterior surfaces of the insulating glass, with shadow bars mountedbetween the glass panes suspended within the air cavity.
GBG (Grilles between the Glass) - 5/8” (16mm) flat or 1” (26mm)contour grilles mounted between the glass panes suspended withinthe air cavity and color matched to the extrusion color.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl WindowsJII001, JII010 or JII011. See www.jeld-wen.com/resources forinstructions.
PERFORMANCE
NFRC Certified - (rated and labeled in accordance with NFRC)
AAMA/NWDMA I.S.2-97R20-DP rated standardOptional C35-DP rated (optional glazing required)
Single-Hung Windows
Premium Vinyl
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-3
QUICK SPEC GUIDE
SPECIFICATION STANDARD FEATURESOPTIONAL FEATURES
Some options may require additional lead times.Consult your JELD-WEN Sales Representative.
COLOR S White S Desert Sand
SIZE(Rough Opening)
S Width: 12” to 48”
S Height: 24” to 96”
S 42” max vent height
FRAME S Integral Nail Fin S Integral Dual Wall Flush Fin
S Pocket/Block Frame
GLAZING S Insulating Clear S Low-E
S Obscure
S Bronze
S Gray
S Gluechip
S Rain
S Azurlite
S Laminated
S All glass availabletempered
regional glass availabilities may differ
HARDWARE S Block and Tackle Balance System
S WEN-Lockt
S Cam Lock
HARDWARE COLOR S Color matched to extrusion
SCREENS S Fiberglass
SCREEN FRAME COLOR S Color matched to extrusion
OTHER S Even Sight Lines
GRILLES S 1” Contour GBG (grilles between the glass)
S 5/8” Flat GBG (grilles between the glass)
S 7/8”, 1-1/8”, 1-3/8”, 2-1/8” SDL (simulated dividedlites) profiles
JAMB DEPTH S 3-1/4“
Single-Hung Windows
Premium Vinyl
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-4
18”(457)19 3/4”(502)
17 1/2”(445)11 3/4”(298)DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE
30”(
762)
313/
4”(8
06)
291/
2”(7
49)
117/
8”(3
02)
PSH1830
22”(559)23 3/4”(603)
21 1/2”(546)15 3/4”(400)
24”(610)25 3/4”(654)
23 1/2”(597)17 3/4”(451)
26”(660)27 3/4”(705)
25 1/2”(648)19 3/4”(502)
30”(762)31 3/4”(806)
29 1/2”(749)23 3/4”(603)
32”(813)33 3/4”(857)
31 1/2”(800)25 3/4”(654)
34”(864)35 3/4”(908)
33 1/2”(851)27 3/4”(705)
36”(914)37 3/4”(959)
35 1/2”(902)29 3/4”(756)
PSH2230 PSH2430 PSH2630 PSH3030 PSH3230 PSH3430 PSH3630
103/
4”(2
73)
36”(
914)
373/
4”(9
59)
351/
2”(9
02)
147/
8”(3
78)
133/
4”(3
49)
42”(
1067
)43
3/4”
(111
1)
411/
2”(1
054)
177/
8”(4
54)
163/
4”(4
25)
48”(
1219
)49
3/4”
(126
4)
471/
2”(1
207)
207/
8”(5
30)
193/
4”(5
02)
54”(
1372
)55
3/4”
(141
6)
531/
2”(1
359)
237/
8”(6
07)
223/
4”(5
78)
60”(
1524
)61
3/4”
(156
8)
591/
2”(1
511)
267/
8”(6
83)
253/
4”(6
54)
PSH1836 PSH2236 PSH2436 PSH2636 PSH3036 PSH3236 PSH3436 PSH3636
PSH1842 PSH2242 PSH2442 PSH2642 PSH3042 PSH3242 PSH3442 PSH3642
PSH1848 PSH2248 PSH2448 PSH2648 PSH3048 PSH3248 PSH3448 PSH3648
PSH1854 PSH2254 PSH2454 PSH2654 PSH3054 PSH3254 PSH3454 PSH3654
PSH1860 PSH2260 PSH2460 PSH2660 PSH3060 PSH3260 PSH3660 PSH3660
35
E
35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-5
66”(
1676
)67
3/4”
(172
1)
651/
2”(1
664)
297/
8”(7
59)
283/
4”(7
30)
72”(
1829
)73
3/4”
(187
3)
711/
2”(1
816)
327/
8”(8
35)
313/
4”(8
06)
78”(
1981
)79
3/4”
(202
6)
771/
2”(1
969)
357/
8”(9
11)
343/
4”(8
83)
84”(
2134
)85
3/4”
(217
8)
831/
2”(2
121)
387/
8”(9
87)
373/
4”(9
59)
PSH1866 PSH2266 PSH2466 PSH2666 PSH3066 PSH3266 PSH3466 PSH3666
PSH1872 PSH2272 PSH2472 PSH2672 PSH3072 PSH3272 PSH3472 PSH3672
PSH1878 PSH2278 PSH2478 PSH2678 PSH3078 PSH3278 PSH3478 PSH3678
PSH1884 PSH2284 PSH2484 PSH2684 PSH3084 PSH3284 PSH3484 PSH3684
E EEE
E EEE
E EEE
E E
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
18”(457)19 3/4”(502)
17 1/2”(445)11 3/4”(298)DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE22”(559)
23 3/4”(603)
21 1/2”(546)15 3/4”(400)
24”(610)25 3/4”(654)
23 1/2”(597)17 3/4”(451)
26”(660)27 3/4”(705)
25 1/2”(648)19 3/4”(502)
30”(762)31 3/4”(806)
29 1/2”(749)23 3/4”(603)
32”(813)33 3/4”(857)
31 1/2”(800)25 3/4”(654)
34”(864)35 3/4”(908)
33 1/2”(851)27 3/4”(705)
36”(914)37 3/4”(959)
35 1/2”(902)29 3/4”(756)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-6
90”(
2286
)91
3/4”
(233
0)
891/
2”(2
273)
417/
8”(1
064)
403/
4”(1
035)
96”(
2438
)97
3/4”
(248
3)
951/
2”(2
426)
447/
8”(1
140)
433/
4”(1
111)
PSH1890 PSH2290 PSH2490 PSH2690 PSH3090 PSH3290 PSH3490 PSH3690
PSH1896 PSH2296 PSH2496 PSH2696 PSH3096 PSH3296 PSH3496 PSH3696
E EEE
E EEE
35 35 35 35 35 35 35 35
35 35 35 35 35 35 35 35
18”(457)19 3/4”(502)
17 1/2”(445)11 3/4”(298)DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE22”(559)
23 3/4”(603)
21 1/2”(546)15 3/4”(400)
24”(610)25 3/4”(654)
23 1/2”(597)17 3/4”(451)
26”(660)27 3/4”(705)
25 1/2”(648)19 3/4”(502)
30”(762)31 3/4”(806)
29 1/2”(749)23 3/4”(603)
32”(813)33 3/4”(857)
31 1/2”(800)25 3/4”(654)
34”(864)35 3/4”(908)
33 1/2”(851)27 3/4”(705)
36”(914)37 3/4”(959)
35 1/2”(902)29 3/4”(756)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-7
38”(965)39 3/4”(1010)
37 1/2”(953)31 3/4”(806)
42”(1067)43 3/4”(1111)
41 1/2”(1054)35 3/4”(908)
48”(1219)49 3/4”(1264)
47 1/2”(1207)41 3/4”(1060)
PSH3830 PSH4230 PSH4830
PSH3836 PSH4236 PSH4836
PSH3842 PSH4242 PSH4842
PSH3848 PSH4248 PSH4848
PSH3854 PSH4254 PSH4854
PSH3860 PSH4260 PSH4860
EEE
35 35 35
35 35 35
35 35 35
35 35 35
35 35 35
35 35 35
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
30”(
762)
313/
4”(8
06)
291/
2”(7
49)
117/
8”(3
02)
103/
4”(2
73)
36”(
914)
373/
4”(9
59)
351/
2”(9
02)
147/
8”(3
78)
133/
4”(3
49)
42”(
1067
)43
3/4”
(111
1)
411/
2”(1
054)
177/
8”(4
54)
163/
4”(4
25)
48”(
1219
)49
3/4”
(126
4)
471/
2”(1
207)
207/
8”(5
30)
193/
4”(5
02)
54”(
1372
)55
3/4”
(141
6)
531/
2”(1
359)
237/
8”(6
07)
223/
4”(5
78)
60”(
1524
)61
3/4”
(156
8)
591/
2”(1
511)
267/
8”(6
83)
253/
4”(6
54)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-8
PSH3866 PSH4266 PSH4866
PSH3872 PSH4272 PSH4872
PSH3878 PSH4278 PSH4878
PSH3884 PSH4284 PSH4884
EEE
EEE
EEE
EEE
35 35 35
35 35 35
35 35 35
35 35 35
38”(965)39 3/4”(1010)
37 1/2”(953)31 3/4”(806)
42”(1067)43 3/4”(1111)
41 1/2”(1054)35 3/4”(908)
48”(1219)49 3/4”(1264)
47 1/2”(1207)41 3/4”(1060)DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE
66”(
1676
)67
3/4”
(172
1)
651/
2”(1
664)
297/
8”(7
59)
283/
4”(7
30)
72”(
1829
)73
3/4”
(187
3)
711/
2”(1
816)
327/
8”(8
35)
313/
4”(8
06)
78”(
1981
)79
3/4”
(202
6)
771/
2”(1
969)
357/
8”(9
11)
343/
4”(8
83)
84”(
2134
)85
3/4”
(217
8)
831/
2”(2
121)
387/
8”(9
87)
373/
4”(9
59)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-9
PSH3890 PSH4290 PSH4890
PSH3896 PSH4296 PSH4896
EEE
EEE
35 35 35
35 35 35
38”(965)39 3/4”(1010)
37 1/2”(953)31 3/4”(806)
42”(1067)43 3/4”(1111)
41 1/2”(1054)35 3/4”(908)
48”(1219)49 3/4”(1264)
47 1/2”(1207)41 3/4”(1060)DAYLIGHT OPENING
FRAME SIZEROUGH OPENING
UNIT SIZE
90”(
2286
)91
3/4”
(233
0)
891/
2”(2
273)
417/
8”(1
064)
403/
4”(1
035)
96”(
2438
)97
3/4”
(248
3)
951/
2”(2
426)
447/
8”(1
140)
433/
4”(1
111)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-10
11 3/4”(298)[2]35 1/2”(902)
36”(914)37 3/4”(959)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
PSH3630-2
15 3/4”(400)[2]43 1/2”(1105)
44”(1118)45 3/4”(1162)
17 3/4”(451)[2]47 1/2”(1207)
48”(1219)49 3/4”(1264)
19 3/4”(502)[2]51 1/2”(1308)
52”(1321)53 3/4”(1365)
23 3/4”(603)[2]59 1/2”(1511)
60”(1524)61 3/4”(1568)
25 3/4”(654)[2]63 1/2”(1613)
64”(1626)65 3/4”(1670)
27 3/4”(705)[2]67 1/2”(1715)
68”(1727)69 3/4”(1772)
29 3/4”(756)[2]71 1/2”(1816)
72”(1829)73 3/4”(1873)
PSH4430-2 PSH4830-2 PSH5230-2 PSH6030-2 PSH6430-2 PSH6830-2 PSH7230-2
PSH3636-2 PSH4436-2 PSH4836-2 PSH5236-2 PSH6036-2 PSH6436-2 PSH6836-2 PSH7236-2
PSH3642-2 PSH4442-2 PSH4842-2 PSH5242-2 PSH6042-2 PSH6442-2 PSH6842-2 PSH7242-2
PSH3648-2 PSH4448-2 PSH4848-2 PSH5248-2 PSH6048-2 PSH6448-2 PSH6848-2 PSH7248-2
PSH3654-2 PSH4454-2 PSH4854-2 PSH5254-2 PSH6054-2 PSH6454-2 PSH6854-2 PSH7254-2
PSH3660-2 PSH4460-2 PSH4860-2 PSH5260-2 PSH6060-2 PSH6460-2 PSH6860-2 PSH7260-2
PSH3666-2 PSH4466-2 PSH4866-2 PSH5266-2 PSH6066-2 PSH6466-2 PSH6866-2 PSH7266-2
PSH3672-2 PSH4472-2 PSH4872-2 PSH5272-2 PSH6072-2 PSH6472-2 PSH6872-2 PSH7272-2
PSH3678-2 PSH4478-2 PSH4878-2 PSH5278-2 PSH6078-2 PSH6478-2 PSH6878-2 PSH7278-2
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
8616
)72
”(18
29)
733/
4”(1
873)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
969)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
E E E E
E
E
E
E
E
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
2 WIDE SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-11
PSH3684-2 PSH4484-2 PSH4884-2 PSH5284-2 PSH6084-2 PSH6484-2 PSH6884-2 PSH7284-2
PSH3690-2 PSH4490-2 PSH4890-2 PSH5290-2 PSH6090-2 PSH6490-2 PSH6890-2 PSH7290-2
PSH3696-2 PSH4496-2 PSH4896-2 PSH5296-2 PSH6096-2 PSH6496-2 PSH6896-2 PSH7296-2
387/
8”(9
87)
831/
2”(2
121)
84”(
2134
)85
3/4”
(217
8)
373/
4”(9
59)
417/
8”(1
064)
891/
2”(2
273)
90”(
2286
)91
3/4”
(233
0)
403/
4”(1
035)
447/
8”(1
140)
951/
2”(2
426)
96”(
2438
)97
3/4”
(248
3)
433/
4”(1
111)
E E E E
E E E E
E E E E
11 3/4”(298)[2]35 1/2”(902)
36”(914)37 3/4”(959)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15 3/4”(400)[2]43 1/2”(1105)
44”(1118)45 3/4”(1162)
17 3/4”(451)[2]47 1/2”(1207)
48”(1219)49 3/4”(1264)
19 3/4”(502)[2]51 1/2”(1308)
52”(1321)53 3/4”(1365)
23 3/4”(603)[2]59 1/2”(1511)
60”(1524)61 3/4”(1568)
25 3/4”(654)[2]63 1/2”(1613)
64”(1626)65 3/4”(1670)
27 3/4”(705)[2]67 1/2”(1715)
68”(1727)69 3/4”(1772)
29 3/4”(756)[2]71 1/2”(1816)
72”(1829)73 3/4”(1873)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
2 WIDE SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-12
31 3/4”(806)[2]75 1/2”(1918)
76”(1930)77 3/4”(1975)
35 3/4”(908)[2]83 1/2”(2121)
84”(2134)85 3/4”(2178)
41 3/4”(1060)[2]95 1/2”(2426)
96”(2438)97 3/4”(2483)
PSH7630-2 PSH8430-2 PSH9630-2
PSH7636-2 PSH8436-2 PSH9636-2
PSH7642-2 PSH8442-2 PSH9642-2
PSH7648-2 PSH8448-2 PSH9648-2
PSH7654-2 PSH8454-2 PSH9654-2
PSH7660-2 PSH8460-2 PSH9660-2
PSH7666-2 PSH8466-2 PSH9666-2
PSH7672-2 PSH8472-2 PSH9672-2
PSH7678-2 PSH8478-2
E E
E E E
E E E
E E E
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
861)
72”(
1829
)73
3/4”
(187
3)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
916)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
2 WIDE SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-13
PSH7684-2 PSH8484-2
PSH7690-2
E
E E38
7/8”
(987
)83
1/2”
(212
1)84
”(21
34)
853/
4”(2
178)
373/
4”(9
59)
417/
8”(1
064)
891/
2”(2
273)
90”(
2286
)91
3/4”
(233
0)
403/
4”(1
035)
31 3/4”(806)[2]75 1/2”(1918)
76”(1930)77 3/4”(1975)
35 3/4”(908)[2]83 1/2”(2121)
84”(2134)85 3/4”(2178)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
2 WIDE SINGLE-HUNG SIDE LOAD
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-14
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
861)
72”(
1829
)73
3/4”
(187
3)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
916)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
387/
8”(9
87)
831/
2”(2
121)
84”(
2134
)85
3/4”
(217
8)
373/
4”(9
59)
PSH243630-3P PSH244830-3P PSH246030-3P PSH247230-3P
PSH243636-3P PSH244836-3P PSH246036-3P PSH247236-3P
PSH243642-3P PSH244842-3P PSH246042-3P PSH247242-3P
PSH243648-3P PSH244848-3P PSH246048-3P PSH247248-3P
PSH243654-3P PSH244854-3P PSH246054-3P PSH247254-3P
PSH243660-3P PSH244860-3P PSH246060-3P PSH247260-3P
PSH243666-3P PSH244866-3P PSH246066-3P PSH247266-3P
PSH243672-3P PSH244872-3P PSH246072-3P PSH247272-3P
PSH243678-3P PSH244878-3P PSH246078-3P PSH247278-3P
PSH243684-3P PSH244884-3P PSH246084-3P PSH247284-3P
257/
8”(6
57)
317/
8”(8
10)
377/
8”(9
62)
437/
8”(1
114)
497/
8”(1
267)
557/
8”(1
419)
617/
8”(1
572)
677/
8”(1
724)
737/
8”(1
876)
797/
8”(2
029)
17 3/4”(451)[2]83 1/2”(2121)
84”(2134)85 3/4”(2178)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
31 7/8”(810)17 3/4”(451)[2]95 1/2”(2426)
96”(2438)97 3/4”(2483)
43 7/8”(1114)17 3/4”(451)[2]107 1/2”(2731)
108”(2743)109 3/4”(2788)
55 7/8”(1419)17 3/4”(451)[2]119 1/2”(3035)
120”(3048)121 3/4”(3092)
67 7/8”(1724)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
3 WIDE SINGLE-HUNG SIDE LOADCENTER PICTURE WITH 24” FLANKER
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-15
PSH246630-3P
PSH246636-3P
PSH246642-3P
PSH246648-3P
PSH246654-3P
PSH246660-3P
PSH246666-3P
PSH246672-3P
PSH246678-3P
PSH246684-3P
17 3/4”(451)[2]143 1/2”(3645)
144”(3658)145 3/4”(3702)
91 7/8”(2334)
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
816)
72”(
1829
)73
3/4”
(187
3)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
969)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
387/
8”(9
87)
831/
2”(2
121)
84”(
2134
)85
3/4”
(217
8)
373/
4”(9
59)
257/
8”(6
57)
317/
8”(8
10)
377/
8”(9
62)
437/
8”(1
114)
497/
8”(1
267)
557/
8”(1
419)
617/
8”(1
572)
677/
8”(1
724)
737/
8”(1
876)
797/
8”(2
029)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT
## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
3 WIDE SINGLE-HUNG SIDE LOADCENTER PICTURE WITH 24” FLANKER
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-16
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
816)
72”(
1829
)73
3/4”
(187
3)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
969)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
387/
8”(9
87)
831/
2”(2
121)
84”(
2134
)85
3/4”
(217
8)
373/
4”(9
59)
257/
8”(6
57)
317/
8”(8
10)
377/
8”(9
62)
437/
8”(1
114)
497/
8”(1
267)
557/
8”(1
419)
617/
8”(1
572)
677/
8”(1
724)
737/
8”(1
876)
797/
8”(2
029)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
43 7/8”(1114)23 3/4”(603)[2]95 1/2”(2426)
96”(2438)97 3/4”(2483)
107 1/2”(2731)108”(2743)
109 3/4”(2788)
119 1/2”(3035)120”(3048)
121 3/4”(3092)
55 7/8”(1419) 67 7/8”(1724)31 7/8”(810)23 3/4”(603)[2] 23 3/4”(603)[2] 23 3/4”(603)[2]
131 1/2”(3340)132”(3353)
133 3/4”(3397)
PSH303630-3P PSH304830-3P PSH306030-3P PSH307230-3P
PSH303636-3P PSH304836-3P PSH306036-3P PSH307236-3P
PSH303642-3P PSH304842-3P PSH306042-3P PSH307242-3P
PSH303648-3P PSH304848-3P PSH306048-3P PSH307248-3P
PSH303654-3P PSH304854-3P PSH306054-3P PSH307254-3P
PSH303660-3P PSH304860-3P PSH306060-3P PSH307260-3P
PSH303666-3P PSH304866-3P PSH306066-3P PSH307266-3P
PSH303672-3P PSH304872-3P PSH306072-3P
PSH303678-3P PSH304878-3P PSH306078-3P
PSH303684-3P PSH304884-3P PSH306084-3P
E E E
E E E
E E E
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
3 WIDE SINGLE-HUNG SIDE LOADCENTER PICTURE WITH 30” FLANKER
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-17
117/
8”(3
02)
291/
2”(7
49)
30”(
762)
313/
4”(8
06)
103/
4”(2
73)
147/
8”(3
78)
351/
2”(9
02)
36”(
914)
373/
4”(9
59)
133/
4”(3
49)
177/
8”(4
54)
411/
2”(1
054)
42”(
1067
)43
3/4”
(111
1)
163/
4”(4
25)
207/
8”(5
30)
471/
2”(1
207)
48”(
1219
)49
3/4”
(126
4)
193/
4”(5
02)
237/
8”(6
07)
531/
2”(1
359)
54”(
1372
)55
3/4”
(141
6)
223/
4”(5
78)
267/
8”(6
83)
591/
2”(1
511)
60”(
1524
)61
3/4”
(156
8)
253/
4”(6
54)
297/
8”(7
59)
651/
2”(1
664)
66”(
1676
)67
3/4”
(172
1)
283/
4”(7
30)
327/
8”(8
35)
711/
2”(1
816)
72”(
1829
)73
3/4”
(187
3)
313/
4”(8
06)
357/
8”(9
11)
771/
2”(1
969)
78”(
1981
)79
3/4”
(202
6)
343/
4”(8
83)
387/
8”(9
87)
831/
2”(2
121)
84”(
2134
)85
3/4”
(217
8)
373/
4”(9
59)
PSH363630-3P257/
8”(6
57)
317/
8”(8
10)
377/
8”(9
62)
437/
8”(1
114)
497/
8”(1
267)
557/
8”(1
419)
617/
8”(1
572)
677/
8”(1
724)
737/
8”(1
876)
797/
8”(2
029)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
PSH364830-3P PSH366030-3P
PSH363636-3P PSH364836-3P PSH366036-3P
PSH363642-3P PSH364842-3P PSH366042-3P
PSH363648-3P PSH364848-3P PSH366048-3P
PSH363654-3P PSH364854-3P PSH366054-3P
PSH363660-3P PSH364860-3P PSH366060-3P
PSH363666-3P PSH364866-3P PSH366066-3P
PSH363672-3P PSH364872-3P
PSH363678-3P PSH364878-3P
PSH363684-3P PSH364884-3P
43 7/8”(1114) 55 7/8”(1419)31 7/8”(810)
131 1/2”(3340)132”(3353)
133 3/4”(3397)
107 1/2”(2731)108”(2743)
109 3/4”(2788)
29 3/4”(756)[2]119 1/2”(3035)
120”(3048)121 3/4”(3092)
29 3/4”(756)[2] 29 3/4”(756)[2]
E E
E E
E E
E E E
E E E
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONSVALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT## INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZINGE UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.
CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.
Note: Elevations shown DO NOT have exterior trim. Subtract 1/2”(12.7) from M.O.(Masonry Opening) for Unit Sizes. Masonry openings above include Sill Nose, see Trim Optionspage for Sill Nose specifications. For other Trim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page.
3 WIDE SINGLE-HUNG SIDE LOADCENTER PICTURE WITH 36” FLANKER
Single-Hung Windows
Premium Vinyl
SCALE: 1/8” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-18
5/8” FLAT GBG BAR 1” CONTOUR GBG BAR
7/8” SDL BAR 1 1/8” SDL BAR
1”5/8”
3/16”5/16”
7/8” 1 1/8” 1 3/8”
3/16”3/16”
3/16”
STANDARD GLASS 3/16” GLASS 1/4” GLASS
1 1/2” 1 1/2”
1 1/2”1 1/2”1 1/2”
1 1/2” 1 1/2” 1 1/2”
1 3/8” SDL BAR
SASH GLAZING OPTIONS: 4” SCALE
Single-Hung Windows
Premium Vinyl
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-19
STANDARD PRAIRIE PRAIRIE SASH
COLONIAL TOP SASH1/2 LITE
COLONIAL TOP SASH
GRILLES & SDL LITE PATTERNS
Single-Hung Windows
Premium Vinyl
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-20
VERTICAL SECTION
3 1/4”
5/8” 5/8”
1 1/4” 1 15/16”
3 1/4”
5/8” 5/8”
1 1/4” 1 15/16”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Day
light
Ope
ning
Gla
ssSi
ze
Scre
enSi
ze
Uni
tSi
ze
1/2”
1 3/8”
1”
1/2”
1/2”
1”
2 7/16”
1/2”
1/2”
2 3/16”
SINGLE-HUNG SIDE LOADNAILING FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-21
HORIZONTAL SECTION
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
Sash Size
Daylight Opening
Glass Size
Unit Size
1/4” 1/4”
3/8”
1 3/16”
2 5/16”
1 3/16”
3/8”
2 5/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
1 7/16”
1”
1/2”
1”
1/2”
1 7/16”
SINGLE-HUNG SIDE LOADNAILING FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-22
VERTICAL SECTION
Day
light
Ope
ning
Gla
ssSi
ze
1/2”
1/2”
Gla
ssSi
ze
Day
light
Ope
ning
SINGLE-HUNG SIDE LOAD WITH TRANSOMNAILING FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-23
HORIZONTAL SECTION
Sash Size
Daylight Opening
Glass Size
Unit Size
3/8”
1 3/16” 1 3/16”
3/8”
2 5/16”Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
2 5/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
1/4”
1 3/8”
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
1/4”
1 7/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
2 WIDE SINGLE-HUNG SIDE LOADNAILING FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-24
HORIZONTAL SECTION
1/4”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
2 5/16”
Unit Size
Rough Opening
Frame Size
3 WIDE SINGLE-HUNG SIDE LOAD WITH CENTER PICTURENAILING FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-25
VERTICAL SECTION
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Day
light
Ope
ning
Gla
ssSi
ze
Scre
enSi
ze
Uni
tSi
ze
1/2”
1 3/8”
1”
1/2”
1/2”
1”
2 15/16”
1/2”
1/2”
2 11/16”
3 3/8”7/16”
5/8”3”
3 3/8”7/16”
5/8”
3”
SINGLE-HUNG SIDE LOADFLUSH FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-26
HORIZONTAL SECTION
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
Sash Size
Daylight Opening
Glass Size
Unit Size
1/4” 1/4”
3/8”
1 3/16”
2 13/16”
1 3/16”
3/8”
2 13/16”
1 7/16”
1”
1/2”
1”
1/2”
1 7/16”
3 3/8”
7/16”
5/8”
3”3 3/8”
7/16”
5/8”
3”
SINGLE-HUNG SIDE LOADFLUSH FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-27
HORIZONTAL SECTION
Sash Size
Daylight Opening
Glass Size
Unit Size
3/8”
1 3/16” 1 3/16”
3/8”
2 13/16”Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
2 13/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
1/4”
1 3/8”
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
1/4”
1 7/16”
3 3/8”
7/16”
5/8”
3” 3 3/8”
7/16”
5/8”
3”
2 WIDE SINGLE-HUNG SIDE LOADFLUSH FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-28
HORIZONTAL SECTION
1/4”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
2 13/16”
Unit Size
Rough Opening
Frame Size
3 3/8”
7/16”
5/8”
3”
3 WIDE SINGLE-HUNG SIDE LOAD WITH CENTER PICTUREFLUSH FIN
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-29
VERTICAL SECTION
3 1/4”
5/8” 5/8”
1 1/4” 1 15/16”
3 1/4”
5/8” 5/8”
1 1/4” 1 15/16”
Fram
eSi
ze
Roug
hO
peni
ng
Sash
Size
Gla
ssSi
ze
Day
light
Ope
ning
Day
light
Ope
ning
Gla
ssSi
ze
Scre
enSi
ze
Uni
tSi
ze
1/2”
1 3/8”
1”
1/2”
1/2”
1”
1 5/16”
1/2”
1/2”
1 1/16”
SINGLE-HUNG SIDE LOADBOX FRAME
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-30
HORIZONTAL SECTION
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
Sash Size
Daylight Opening
Glass Size
Unit Size
1/4” 1/4”
3/8”
1 3/16”
1 3/16”
1 3/16”
3/8”
1 3/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
1 7/16”
1”
1/2”
1”
1/2”
1 7/16”
SINGLE-HUNG SIDE LOADBOX FRAME
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-31
HORIZONTAL SECTION
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
Sash Size
Daylight Opening
Glass Size
Unit Size
3/8”
1 3/16” 1 3/16”
3/8”
1 3/16”Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
1 3/16”
Frame Size
Rough Opening
Sash Size
Glass Size
Daylight Opening
1/4”
1 3/8”
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
1/4”
1 7/16”
2 WIDE SINGLE-HUNG SIDE LOADBOX FRAME
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
Architectural Detail ManualJuly 2010 JELD-WEN reserves the right to change specifications without notice. Page 3-32
HORIZONTAL SECTION
1/4”
3 1/4”
5/8”
5/8”
1 1/4”
1 15/16”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Glass Size
Daylight Opening
1”
1/2”
1”
1/2”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
Sash Size
Daylight Opening
Glass Size
3/8”
1 3/16” 1 3/16”
3/8”
1 3/16”
Unit Size
Rough Opening
Frame Size
3 WIDE SINGLE-HUNG SIDE LOAD WITH CENTER PICTUREBOX FRAME
Single-Hung Windows
Premium Vinyl
SCALE: 4” = 1’
![M.O [7] - Paralisia Facial](https://static.fdocuments.net/doc/165x107/5438ce15afaf9fbe2e8b49ea/mo-7-paralisia-facial.jpg)
