Sin título - rodrigomorenog.files.wordpress.com · Title: Sin título Created Date: 20160817010951Z
Sin título-1 · Sin título-1.cdr Author: Diego Created Date: 10/14/2016 5:10:16 PM ...
3
Third Angle * The allowable tolerance of dimension is ± 5mm *The dimension can be changed for improvement without notice. RING BLOWER VACUUM & PRESSURE PB-201 www.pacificblowers.com - Call Us: (305) 718-8895 - Fax: (305) 722-7387 - info@pacificblowers.com Single Phase
Transcript of Sin título-1 · Sin título-1.cdr Author: Diego Created Date: 10/14/2016 5:10:16 PM ...
Third Angle
* The allowable tolerance of dimension is ± 5mm
*The dimension can be changed for improvement without notice.
RING BLOWER VACUUM & PRESSURE
PB-201
www.pacificblowers.com - Call Us: (305) 718-8895 - Fax: (305) 722-7387 - [email protected]
Single Phase
60Hz50Hz
ADVANTAGES
* Low noise 66dB
* Continuous, low-maintenance operation
* Saves space and electricity
* Trouble-free installation
* Easy replacement of parts
* Outboard bearings yielding longer life
* Dual voltage 110/230
PRODUCT OPTIONS
* 1-1/2” Relief Valve (recommended)
* Inlet Filter (recommended)
* Check Valve (recommended)
* Silencer (recommended)
* Liquid filled gauge (recommended)
* Enclosed motor starter (recommended)
* Filter motor gauge (recommended)
* Belt-driven bare shaft blowers are
available upon request (Special Order)
* Explosion proof motors available upon
request (Special Order)
[Class 2/Groups E,F,G/Division 1 Certified]
* The performances above were measured under conditions of air temperature 20ºC and
atmospheric pressure 1,013 mbar
* The allowable tolerance of the perfomance value is ± 10%
* The sound level was measured at a distance of 1.5m with the fully open inlet and outlet ports
* The continuous operation can be made at a point below the curve, however, the continuous
operation nearby the rated pressure point may cause a motor breakdown. In the case of
continuous operation close to the rated pressure, it is strongly recommended to use the
pressurerelief valve.
* The allowable tolerance of the performance value is ± 10%
PERFORMANCE CURVES
PhaseMotor
(HP)
Motor
(Kw)
Current (A)
110 / 220 V
Flow
(cfm)
Flow
(m3/min)
Flow
(m3/hr)
Max
Pressure
(in H2O)
Max
Pressure
(mmAq)
Max
Pressure
(psig)
Max
Pressure
(mbar)
Max
Vacuum
(in H2O)
Max
Vacuum
(mmAq)
Max
Vacuum
(psig)
Max
Vacuum
(mbar)
Sound
Level
(dB/A)
Weight
(lbs.)
Weight
(Kg)
Diameter
(INLET/OUTLET)
inch
1 1,0 0,75 12.6/ 6.3 102 2,9 174 47 1200 1,7 118 44 1100 1,56 108 66 45 20 1 1/2
PhaseMotor
(HP)
Motor
(Kw)
Current (A)
110 / 220 V
Flow
(cfm)
Flow
(m3/min)
Flow
(m3/hr)
Max
Pressure
(in H2O)
Max
Pressure
(mmAq)
Max
Pressure
(psig)
Max
Pressure
(mbar)
Max
Vacuum
(in H2O)
Max
Vacuum
(mmAq)
Max
Vacuum
(psig)
Max
Vacuum
(mbar)
Sound
Level
(dB/A)
Weight
(lbs.)
Weight
(Kg)
Diameter
(INLET/OUTLET)
inch
1 0,85 0,63 10.4 / 5.2 81 2,3 138 47 1200 1,7 118 47 1200 1,7 118 66 45 20 1 1/2
Single Stage Regenerative Blowers / 1 Phase (110 / 220 V) - 60Hz
Single Stage Regenerative Blowers / 1 Phase (110 / 220 V) - 50Hz
50Hz 60Hz
All Pacific blowers are available in unassembled kits for either pressure or vacuum applications.
These kits include:
Vacuum* Silencer* Inlet Filter* Relief Valve* Vacuum Gauge* Flow Meter (optional)
Pressure* Relief Valve* Check Valve* Pressure Gauge* Inlet Filter* Flow Meter (optional)* Silencer (optional)
KPPB-201 - Pressure Kit Drawing
(14,64")
(18.03")
(11,21")
1 1/2 NPT
(12,05")
(2,95") (3,74")
(18,09")
(1,81") (4,53")
(8,86")
(10,04")
(10,63")
1 1/4 NPT
336,8mm
(5,12") (3,27")(8.07")
(9.06")
459,5mm
306,07mm
74,93mm 95mm
457,96mm
255mm
255,04mm
115,06mm
371,85mm
284,73mm
45,97mm
KVPB-201 - Vacuum Kit Drawing
686,81mm(27,04")
270mm
130,04mm 83,05mm
(13,26")
204,94mm
230,12mm
Kit Vacuum Pump 1-1/2" NPT KVPB-201
Kit Pressure Pump 1-1/2" NPT KPPB-201
