SIN - GSA Advantage
Transcript of SIN - GSA Advantage
2115 Chapman Rd Suite 101 Chattanooga, TN 37421
Office: 888-305-8020 Fax: [email protected] Email:
423-624-6534
General Services Administration
Federal Supply Service
Federal Supply Schedule Price List
GSA Contract #
47QSMA20D08NB
FSC Schedule MAS 3FURNISHANCILLARY
NAICS: 33792 ,0 442291
Small Business, Service Disabled Veteran Owned Business
Federal ID # 46-1047198
Special Item Numbers
SIN 3FURNISH
SIN ANCILLARY
Lowest Priced Items
Hourly Rate:
SIN 3FURNISH (Window Treatments) Draper Recharge Motor Cable Extender - 96"
$16.00 Each
SIN ANCILLARY(Ancillary Services) New Window Treatments, Regular Business Hours without scaffolding $34.00 Each
Varies depending on job functions and only applies when regular installation rate do not apply. Labor rates attached. Job functions and rates must be agreed to in advance of project.
Maximum Order: SIN 3FURNISH $500,000.00
$100,000.00
Minimum Order:
SIN Ancillary
$100.00
Geographic Coverage:
Points of Production:
48 Contiguous States, and Washington, D.C.
Caco - Johnson City, TN
Discounts from Commercial Pricelist: SIN 3FURNISH % Varies from manufacturer and Supplies SIN ANCILLARY 5%
Quantity Volume Discounts:
$5,000.00- $9,999.99 2%
$10,000.00- $24,999.99 3 %
$25,000.00- $49,999.99 4 %
$50,000.00- $74,999.99 5%
$75,000.00- $99,999.99 6 %
$100,000.00- $199,999.99 8 %
$200,000.00- $299,999.99 10 %
$300,000.00- $399,999.99 51 %
$400,000.00- $499,999.99 20 %
Prompt Payment Terms :
Government Purchase Cards:
Foreign Items:
Time of Delivery:
Expedited Delivery:
Overnight and 2 Day Delivery:
Urgent Requirements:
FOB Points
Ordering Address:
3% 20 Days, Net 30
are accepted at or below micro-purchase threshold
are accepted above micro-purchase threshold
Not applicable
60 days ARO
Items available for expedited delivery are available, please contact supplier for rates
Please contact supplier for options
Agencies are encouraged to contact supplier for Urgent Requirement Purchases
Origin
Light Consultants, LLC.
2115 Chapman Rd. Suite 101 Chattanooga, TN 37421
888-305-8020 Ext. 117
Ordering Procedures: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405-3.
Payment Address: Light Consultants, LLC. Dba Blindsmax.com 2115 Chapman Rd. Suite 101 Chattanooga, TN 37421 United States
Warranty Provision: All items furnished shall be free from defects in materials and workmanship for a period of one (1) year from date of delivery.
All parts found to be defective within that period shall be replaced by contractor.
Export Packaging: Not Applicable
Terms & Conditions of Government Purchase card acceptance: are threshold micro-purchase below or at accepted
are threshold micro-purchase above accepted
Terms & Conditions of rental, Maintenance and repair: Not Applicable
Terms & Conditions of Installation: Not Applicable
Terms & Conditions for any other Services:
List of Services and Distribution Parts:
List of Participating Dealers:
Preventative Maintenance:
Special Attributes:
Section 508 Compliance:
DUNS Number:
Central Contractor Registration:
Not Applicable
Not Applicable
Caco, Inc. and School Safety Solutions Inc.
Not Applicable
A substantial number of fabrics now available have been milled from recycled plastic bottles and meet federal standards. Roller shades that significantly reduce heat loads are also available. Please visit www.blindsmax.com for more information.
Not Applicable
17-427-4076
Contractor is registered in the System for Award Management (SAM). Cage Code# 04EM34
TableCaco
Serenity Delta Avalon
1” 1” 1”
29 Page List -Price Malibu Aluminum 1” 28 Page List -Price Catalina Aluminum 27 Page List -Price Summit Aluminum
26 Page List -Price Spectrum Aluminum 20 Page List -Price Blinds Wood Faux Fast Cordless
17 Page List -Price Blinds Wood Faux 15 Page List -Price Blinds Wood
10 Page List -Price Shades Roller 6 Page - Commercial
Lists Price Commercial- Contents of
Retail Price Guide 2021
Serenity Roller Shades
Delta Woods
Avalon Faux Wood
Cordless Fast Faux
2” Aluminum
1” Aluminum eSp ctrum
1” Aluminum Summit
1” Aluminum Catalina
1” Aluminum Malibu
Table of Contents
Customer Service Polices 2-3
Serenity Roller Shades
Features, Options, Care & Operating Instructions 4
Pricing 5-7
Motorization 8
Warranty 9
Horizontals
▪ Wood Blinds
Delta Woods
Price Charts 10
Features & Options 11
▪ Faux Wood
Avalon Faux Wood
Price Charts 12-13
Price Chart, Features & Options 14
Fast Faux - Pricing & Features 15
Faux Arch 16
▪ 2” PVC Fashions Plus 17
Motorization 18
Warranty for Delta Woods, Avalon Faux Wood, Fast Faux & 2” PVC Fashions Plus 19
Aluminum Horizontals
▪ 2” Maxi Blind 20
▪ Spectrum Privacy Blind 21
▪ Summit 22
▪ Catalina 23
▪ Malibu 24
Slat Count & Stacking Charts 25
Slat Colors 26
Warranty 27
Dealers Choice Verticals
Standard Features & Options 28
Track Systems 29
Pattern and Louver Stacking Charts 30
Econ 2220 Pricing Charts 31-33
Excell 2200 Pricing Charts 34-36
Warranty 37
3
How to Measure
Inside mount
A. Measure the window opening at three different
places, and use the narrowest dimension when
ordering. Be exact! The factory will make the blind
slightly narrower so it won’t rub against the window
casing. (See A inside mount).
B. Measure the height of the window from the top
(soffit) down to the sill. NOTE: The finished blind length
may have a tolerance of +1/2” or -1/4”. (See B inside
mount).
CACO will automatically make a 1/2" deduction in
width for measurements submitted as inside mount.
Outside mount
Measure exact width and height of the area to be covered. It
is recommended that blinds overlap the window opening by
at least 1 1/2” on each side to insure privacy and control
sunlight. (See A outside mount). When installation is designed
for “no sill,” allow the blind to overlap the bottom of the
window casing by at least 1 1/2”. Blinds will be made to exact
measurements given. NOTE: The finished blind length may
have a tolerance of +1/2” or -1/4”. (See B outside mount).
CACO will not make any deductions for measurements
submitted as outside mount.
Inside Width (A)
Ou
tsid
e M
ou
nt
(B)
Insi
de
Mo
un
t (B
)
Sill Sill
Outside Width (A)
4
Serenity Roller Shades
Features, Options & Care Features ◦ Manual Clutch system operated via #10 stainless steel, plastic or painted steel bead chain.
◦ Varying diameters of aluminum tube to accommodate most any width.
◦ 1” aluminum internal hem bar.
◦ Available in many styles in Sun Shadow, Mermet decorative fabric and blackout fabrics. Fabric opaqueness varies from
translucent to room darkening.
◦ Alkenz and 3-G Mermet solar shading fabrics can still keep the view while blocking harmful UV rays from the sun. Easy to clean.
Options ◦ 3” or 4” flat or curved aluminum fascia
◦ Rollease CD120 Cassette System
◦ Rollease 5” Fascia Dual Shade System Colors available: Anodized Aluminum, White and Bronze
◦ Aluminum external bottom bar Colors available: White, Alabaster, Aluminum, Bronze, and Black
◦ Motorization, 12 volt DC or 110 volt AC with multiple control options. See motorized roller shade section
Surcharges ◦ External Clutch $10.00 per shade
◦ Galaxy Clutch $20.00 per shade
◦ Side Channels* $20.00 per ft (length of shade)
◦ Sill Channels* $8.00 per ft (width of shade)
Customer discount will be applied to additional charges for Clutches, Side and Sill channels.
* Round up to nearest foot¹
Cordless Options:
Please note we are currently working on a cordless option.
Roller Shade Price Groups
Fabric Style Fabric Width Price Chart Fabric Style Fabric Width Price Chart
3000 Net 1% 98” 4 E Screen 1% 98” 7
3000 Net 3% 98” 3 E Screen 3% 98” 6
3000 Net 5% 98” 2 E Screen 5% 98” 5
3000 Net 10% 98” 2 E Screen 10% 98” 5
3000 HT 3% 98” 4 Flocke 94” 9
3000 HT 5% 98” 3 M Screen 3% 98’ 6
3000 RR 98” 3 M Screen 5% 98” 5
4000 Net 3% 98” 3 Matte 72” 1
4000 Net 5% 98” 2 Matte 96” 4
4000 Net 10% 98” 2 Matte 118” 4
4000 L 98” 4 Mesa 98” 8
4700 P 98” 4 S Screen 98” 7
Ambient 98” 5 T Screen Deco 3% 122” 7
Avila 118” 8 T Screen Deco 5% 122” 6
Deco 3% 98” 7 Tempe 98” 6
Deco 5% 98” 6 View R 98” 3
CARE AND OPERATION Make sure brackets are mounted level or shade will roll
crooked.
IF YOUR SHADE DOES NOT ROLL STRAIGHT,
CORRECT AS FOLLOWS:
Example:
(Fig. A) - Shade veers toward right. Correct by lowering shade completely and place a piece of paper, indicated by arrow, as
close to the roller as possible. It acts as a shim.
(Fig. B) - Shade veers toward left. Correct by lowering shade completely and place a piece of paper, indicated by arrow, as close
to the roller as possible. It acts as a shim.
(Fig. A) (Fig. B)
5
Serenity Roller Shades
Price Charts – Group 1, Group 2 & Group 3
Group 1 Matte Fabric 72” wide
Group 2 3000 Net 5% 3000 Net 10% 4000 Net 5% 4000 Net 10% Fabric 98” wide
Group 3 3000 Net 3% 3000 HT 5% 3000 RR 4000 Net 3% View R Fabric 98” wide
* Any product to the right or below dark line will manufacture with heavy duty clutch and tube
* Any product in gray shaded area will require seam (not all fabrics can be seamed, check with customer service)
25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
3" Fascia 53 59 64 70 76 82 89 95 100 106 112 125 135 147
4" Fascia 58 65 71 78 85 92 99 105 112 120 126 140 153 166
CD120 Cassette 57 68 80 93 105 118 130 142 155 166 178 203
5” Fascia Dual Shade 111 122 131 140 149 159 168 178 188 197 206 225
External Bottom Bar 18 22 25 31 32 36 39 43 47 51 55 62 68 75
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 112 124 135 145 158 167 178 190 200 210 221 243 398 428
42” 115 127 139 149 162 173 185 196 208 219 231 254 408 442
48” 118 131 142 156 167 179 192 204 215 229 239 264 420 454
54” 122 134 146 160 172 185 198 210 223 236 249 275 432 468
60” 124 137 149 164 176 191 204 216 232 244 259 285 443 479
66” 126 140 156 168 182 197 210 226 238 315 334 369 568 615
72” 129 143 159 172 188 203 216 232 245 326 345 381 582 631
78” 132 146 163 178 193 208 223 239 254 337 356 394 596 647
84” 135 149 166 182 198 213 231 245 262 347 368 563 611 663
90” 137 154 170 187 204 220 236 253 269 358 378 575 625 679
96” 139 158 173 192 208 227 242 261 277 369 389 589 640 695
108” 144 164 181 200 219 237 256 275 293 389 556 614 667 727
120” 149 170 190 209 230 249 269 288 308 410 579 640 696 759
132” 157 176 197 218 239 261 281 303 324 432 600 665 726 790
144” 161 182 206 229 251 273 295 316 339 452 623 691 755 823
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 132 146 163 178 194 209 226 240 255 270 286 316 478 520
42” 137 154 170 187 204 220 237 254 270 286 303 336 501 544
48” 142 161 178 196 213 232 249 267 285 303 321 356 522 568
54” 146 166 185 204 222 242 262 280 300 318 337 375 544 592
60” 152 172 193 212 233 253 274 294 313 334 354 396 565 616
66” 158 178 200 221 242 264 286 307 329 349 372 414 588 640
72” 163 185 207 231 253 275 299 321 343 367 388 434 609 664
78” 167 191 214 238 263 286 310 334 358 381 405 453 631 688
84” 172 197 222 246 273 298 323 347 373 398 423 597 653 712
90” 176 204 230 256 281 308 335 360 387 412 440 616 843 921
96” 182 209 237 265 291 320 347 374 402 429 456 637 869 951
108” 193 221 252 281 311 341 372 402 431 461 606 676 924 1010
120” 203 235 267 300 332 364 397 428 461 493 640 714 977 1071
132” 212 246 281 315 351 386 421 455 490 524 674 754 1033 1132
144” 222 260 297 334 371 407 445 481 519 557 708 793 1087 1192
Width to: 25” 31” 37” 43” 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 135 151 167 184 199 214 232 246 264 279 297 329 491 534
42” 140 159 174 193 209 228 244 262 279 298 313 349 514 560
48” 145 165 182 202 220 239 259 276 295 313 333 370 538 586
54” 151 171 191 210 231 251 270 290 310 331 351 391 561 611
60” 157 178 199 220 241 263 284 305 326 347 370 411 585 637
66” 162 185 207 230 252 275 298 320 341 365 387 433 608 662
72” 167 192 214 238 263 286 310 334 358 381 405 453 631 689
78” 172 198 222 248 273 299 324 348 374 399 424 474 655 714
84” 178 204 231 257 284 310 336 363 389 416 442 620 677 740
90” 184 210 238 266 294 322 349 377 405 433 461 640 875 958
96” 188 216 246 276 305 334 363 392 421 449 478 661 904 990
108” 199 231 263 294 326 357 388 421 452 484 630 703 963 1055
120” 210 243 278 312 347 380 415 449 482 518 666 745 1021 1119
132” 220 257 294 332 369 405 442 478 515 552 703 787 1078 1182
144” 232 270 310 349 389 428 468 507 546 586 740 828 1137 1247
6
Serenity Roller Shades
Price Charts – Group 4, Group 5 & Group 6
Group 4 3000 Net 1% 3000 HT 3% 4000 L 4700 P Matte (96”) Matte (118”) Fabric 98” wide except were noted
Group 5 Ambient E Screen 5% E Screen 10% M Screen 5% Fabric 98” wide
Group 6 Deco 5% E Screen 3% M Screen 3% T Screen Deco 5% (122”) Tempe Fabric 98” wide except were noted
* Any product to the right or below dark line will manufacture with heavy duty clutch and tube
* Any product in gray shaded area will require seam (not all fabrics can be seamed, check with customer service
25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
3" Fascia 53 59 64 70 76 82 89 95 100 106 112 125 135 147
4" Fascia 58 65 71 78 85 92 99 105 112 120 126 140 153 166
CD120 Cassette 57 68 80 93 105 118 130 142 155 166 178 203
5” Fascia Dual Shade 111 122 131 140 149 159 168 178 188 197 206 225
External Bottom Bar 18 22 25 31 32 36 39 43 47 51 55 62 68 75
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 138 154 171 188 204 221 238 254 271 288 304 338 505 548
42” 144 163 179 198 215 234 252 270 288 305 324 360 529 576
48” 149 169 188 208 228 246 266 285 304 324 343 381 553 602
54” 156 176 197 216 237 260 279 300 320 342 363 403 578 629
60” 162 182 204 228 248 271 294 314 337 359 380 425 602 657
66” 166 190 213 236 261 282 306 331 353 377 400 446 626 682
72” 171 197 221 246 270 296 320 345 369 394 419 469 649 710
78” 177 203 230 255 281 308 334 360 386 412 438 491 675 736
84” 182 210 238 267 294 320 347 375 402 429 458 640 698 763
90” 188 216 246 275 303 333 362 389 419 447 476 661 902 989
96” 195 226 254 285 314 345 375 405 435 466 495 682 933 1022
108” 205 238 271 304 336 369 402 435 468 501 649 726 994 1090
120” 216 252 287 322 359 394 429 465 501 536 689 768 941 1157
132” 229 266 304 342 380 419 457 495 532 571 727 813 1114 1224
144” 239 279 320 362 402 443 484 525 565 607 764 857 1175 1291
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 142 161 178 195 212 230 247 264 281 299 316 351 523 569
42” 148 168 186 205 225 242 262 279 299 318 336 373 548 596
48” 154 174 195 215 236 255 275 296 315 335 355 397 573 623
54” 161 181 204 226 245 268 289 310 333 354 375 418 598 652
60” 167 191 212 236 257 281 303 328 348 373 394 440 623 679
66” 172 197 220 244 270 295 318 342 367 390 414 463 649 708
72” 178 204 230 255 281 307 332 357 382 409 435 486 674 735
78” 184 210 238 265 291 320 346 374 401 427 455 508 699 764
84” 191 218 247 275 303 332 360 389 416 446 474 662 724 792
90” 196 226 255 285 315 344 375 404 435 463 494 686 937 1024
96” 202 233 264 296 328 357 389 421 451 482 514 708 967 1059
108” 213 247 281 315 348 382 416 451 485 519 675 754 1031 1130
120” 226 262 299 335 373 409 446 482 519 557 713 798 1094 1200
132” 237 276 315 355 394 435 474 514 554 593 754 844 1157 1269
144” 248 290 333 375 418 460 503 545 588 630 793 888 1219 1339
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 153 172 191 209 228 246 265 282 303 322 340 377 560 608
42” 160 179 200 220 240 261 280 301 322 341 362 402 588 640
48” 166 188 209 232 252 274 296 318 340 362 384 426 614 668
54” 172 196 219 242 265 288 311 335 358 382 404 452 643 700
60” 178 203 228 252 278 303 328 353 377 402 426 476 671 731
66” 184 211 237 264 290 316 342 370 396 422 447 501 697 762
72” 192 219 247 274 303 331 358 386 414 441 470 525 725 792
78” 198 228 256 286 315 345 373 403 433 462 492 551 754 823
84” 204 235 266 297 328 358 389 421 452 482 513 713 780 854
90” 210 242 275 308 340 372 406 438 470 502 536 738 1010 1104
96” 216 251 285 319 353 387 421 455 489 523 557 763 1044 1142
108” 230 267 304 340 377 414 452 489 525 562 727 812 1112 1219
120” 242 281 323 363 403 443 484 523 562 604 770 862 1181 1296
132” 255 298 341 385 428 471 514 558 600 644 814 911 1251 1372
144” 268 314 360 407 453 500 545 591 638 684 857 961 1319 1449
7
Serenity Roller Shades
Price Charts – Group 7, Group 8 & Group 9
Group 7 Deco 3% Escreen 1% S Screen T Screen Deco 3% (122”) Fabric 98” wide except were noted
Group 8 Avila (118”) Mesa Fabric 98” wide except were noted
Group 9 Flocke Fabric 98” wide
* Any product to the right or below dark line will manufacture with heavy duty clutch and tube* Any product in gray shaded area will require seam (not all fabrics can be seamed, check with customer service
25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
3" Fascia 53 59 64 70 76 82 89 95 100 106 112 125 135 147
4" Fascia 58 65 71 78 85 92 99 105 112 120 126 140 153 166
CD120 Cassette 57 68 80 93 105 118 130 142 155 166 178 203
5” Fascia Dual Shade 111 122 131 140 149 159 168 178 188 197 206 225
External Bottom Bar 18 22 25 31 32 36 39 43 47 51 55 62 68 75
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 161 181 201 221 240 260 279 297 319 338 358 397 590 640
42” 168 189 210 231 253 274 295 316 338 359 380 424 619 674
48” 174 198 221 244 265 289 311 334 358 380 404 448 646 703
54” 181 206 230 255 279 303 328 353 376 403 426 475 677 737
60” 188 213 240 265 293 319 345 371 397 424 448 501 706 769
66” 193 223 249 277 305 333 360 390 416 444 471 528 734 802
72” 202 230 261 289 319 348 376 406 436 465 495 553 763 833
78” 208 240 269 301 332 364 393 425 456 487 518 579 793 866
84” 214 247 280 312 345 376 409 442 475 508 540 751 822 899
90” 222 255 290 325 358 392 428 461 495 529 564 777 1064 1162
96” 228 264 300 335 371 407 442 478 514 551 586 803 1099 1202
108” 242 281 321 358 397 436 475 514 553 592 765 855 1171 1282
120” 255 296 339 382 425 467 509 551 592 636 810 907 1243 1364
132” 268 313 359 405 451 496 541 587 632 678 858 960 1316 1444
144” 282 331 378 429 476 527 574 622 672 720 902 1011 1388 1526
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 179 202 225 246 268 290 311 332 357 378 400 444 659 715
42” 188 211 235 259 282 307 330 355 378 401 426 473 692 754
48” 195 221 246 273 296 323 348 373 400 426 452 501 723 786
54” 202 231 257 285 311 338 366 394 421 449 475 531 757 824
60” 210 239 268 296 328 357 386 414 444 473 501 561 790 860
66” 215 248 279 310 341 372 403 435 466 496 527 590 820 896
72” 226 257 291 323 357 390 421 454 488 520 553 618 853 932
78” 233 268 301 336 371 406 439 474 509 543 578 647 887 968
84” 240 276 313 349 386 421 458 495 531 568 604 839 919 1004
90” 247 285 324 363 400 438 478 515 553 591 631 868 1189 1299
96” 255 295 335 375 414 455 495 535 575 614 655 898 1229 1344
108” 270 314 358 400 444 488 531 575 618 661 855 956 1308 1434
120” 285 331 379 427 474 522 569 614 661 710 906 1014 1390 1525
132” 300 351 401 453 503 555 605 656 706 758 958 1072 1471 1614
144” 315 370 424 479 532 589 641 695 751 804 1008 1130 1552 1705
Width to: 25" 31" 37" 43" 49" 55" 61" 67" 73" 79" 85" 97" 108" 120"
Len
gth
to
: 36” 254 291 331 368 406 443 482 521 558 596 633 710 967 1058
42” 269 311 353 394 436 477 521 562 604 647 688 770 1035 1132
48” 286 331 375 423 468 513 558 604 651 695 741 832 1102 1205
54” 301 349 399 449 499 547 596 647 695 745 795 893 1169 1284
60” 316 369 423 475 528 581 633 688 741 795 848 954 1238 1359
66” 332 388 445 502 559 616 673 729 788 841 900 1015 1305 1433
72” 348 408 469 529 591 651 710 770 832 893 954 1075 1373 1509
78” 364 427 492 559 621 686 751 814 878 943 1005 1135 1442 1584
84” 378 447 514 584 652 721 788 856 924 993 1060 1370 1509 1658
90” 394 466 537 609 684 755 826 897 953 1040 1112
96” 409 487 561 637 713 789 863 938 1015 1091 1165
108” 440 524 607 691 774 857 938 1024 1105 1190 1433
120” 472 562 655 745 834 926 1016 1105 1198 1288 1540
132” 503 602 699 797 896 994 1093 1191 1288 1387 1645
144” 535 640 747 853 959 1063 1168 1275 1380 1487 1752
8
Serenity Roller Shades
Motorization
AUTOMATE | ARC™ (Automate Radio Communication) motors offer a wire free or wired motorization option that is an easy to use
and program solution to suit a large range of applications, with varying torques and speed levels.
Features include:
• Automate motorization available in 1 A/C Wired style or 3 Li-ion Battery styles to suit your project.
• Leveling control
• Simple limit setting and adjustment
• 3 operational speed settings available
• Favorite position
• 2-way RF communication
• 5 year motor warranty
Lithium Ion Battery Wire Free Motorization AUTOMATE | Li-ion ARC motors offer a wire free, rechargeable, easy to use and program solution. Automate motors feature a
charge-management circuit that adjusts the amount of electrical current feeding the battery. As a battery reaches its maximum
charge, the circuit will limit the current eventually shutting off power once the battery is fully charged.
• Rechargeable built-in Li-ion battery with up to 500 up and down cycles per charge. These numbers are impacted by shade size
and fabric weight, but on average our motors in prevalent size shades are able to last about a year and half under normal
operation (one cycle per day).
• Optional solar powered charger
• Minimum Widths:
LI-ION 1.1nm 24”
LI-ION 2.0nm 30”
LI-ION 3.0nm 34”
• Maximum sizes. Please note sizes listed are base on average and can vary based on fabric:
LI-ION 1.1nm 84” x 84”
LI-ION 2.0nm 120” x 120”
LI-ION 3.0nm 144” x 144”
Automate ARC Li-ion Motors:
• LI-ION 1.1nm $135 Net
• LI-ION 2.0nm $160 Net
• LI-ION 3.0nm $212 Net
• 12v Wall Charger $23 Net
• Solar Panel $130 Net
AC Motorization Automate | AC tubular motors combine the simple, intuitive features of ARC “Automate Radio Communication” with the higher
lifting capacity of an AC motor for larger shade applications.
• Minimum width: 34”
• Maximum size based on average and can vary based on fabric: 120” x 120”
Automate ARC AC Motors:
• ACRF $250 Net
Wireless Controls Automate | Compatible with all ARC motors, Paradigm remotes and switches feature a contemporary design with touch sensitive
controls.
• Controls include 2 remote styles and 3 cut in wall switches
• Optional Automate Pulse Hub with Wi-Fi built in to automate shades to be controlled from your smart phone or tablet. A local
wireless network will be required.
Automate Remote Control:
• Paradigm 1 Channel Remote $38 Net
• Paradigm 15 Channel Remote $45 Net
• Paradigm 1 Channel Cut in Wall Switch $30 Net
• Paradigm 2 Channel Cut in Wall Switch $34 Net
• Paradigm 15 Channel Cut in Wall Switch $38 Net
• Automate Pulse Hub $175 Net
9
Serenity Roller Shades
Warranty
CACO, Inc. will extend a limited lifetime warranty on Serenity Roller Shade clutches not to exceed 25
years, 3 years on plastic bead chain for roller shade operation, a limited lifetime warranty on interior use
Alkenz fabrics not to exceed 25 years, a limited 10 year warranty on interior use Mermet Fabrics, a limited
5 year warranty on interior use vinyl fabrics and a 5 year limited warranty on Automate motors. Each
shade is warrantied to be free from defects in materials and workmanship to the original owner, provided
that the shades were installed in a residential dwelling, properly installed in a window, door or other interior
area for which they intended, maintained and cleaned with the manufacturer recommendations.
Damage resulting from misuse, abuse, exposure to the elements, including but not limited to exposure to
salty air, discoloration due to sunlight or passage of time, exposure to humidity, accidents, alterations or
normal wear and tear upon the shades are not covered by this warranty. Some fading or reduction in
color intensity may occur and should not be deemed defective. Returns for the above mentioned reasons
are not warrantied.
The obligation of CACO’s manufactured products and its distributors is limited to repair or replacement of
the blinds or components found to be defective, at our option, provided the blinds are returned to an
authorized CACO dealer or distributor and accompanied by “proof of purchase”. CACO is not
responsible for any labor costs associated with fabricating alterations, measuring, or installation and to
include shipping charges.
This warranty is exclusive and in lieu of all other obligations, liabilities, or warranties. In no event shall CACO
be liable or responsible for incidental or consequential damages, or for any other direct or indirect
damage, loss, cost, expense, or fee. Some states do not allow the exclusion or limitations of incidental or
consequential damages, so this limitation may not apply to you. This warranty gives you specific rights,
and you may also have other rights, which vary from state to state.
10
Wood Horizontal Blinds
2” Delta Woods
2” Delta Woods Painted
3600-White 3413-Snow White 3421-Almost White 3401-Alabaster
2 1/2” Delta Woods Painted
W600-White W413-Snow White W421-Almost White W401-Alabaster
*Due to weight limitations, blinds in the shaded area to the right of the dashed line are recommended to be manufactured two or
three blinds under one headrail. Blinds in this area will not be warrantied if made as one blind. To price multiple blinds under one
headrail, price each blind separately and add together for total cost.
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 79 92 109 118 127 140 149 162 199 206 213 243 274 304 333
36 92 104 121 131 141 154 167 185 224 236 241 273 305 337 366
42 100 115 135 144 155 173 186 207 251 258 273 308 343 378 412
48 107 122 147 160 171 188 206 227 276 292 306 345 384 423 460
54 119 137 162 174 185 207 224 252 299 323 343 384 425 464 504
61 132 149 175 188 201 223 245 276 323 353 373 417 461 503 547
66 142 163 189 202 216 240 271 300 356 384 409 457 504 558 609
73 157 178 201 216 233 260 293 326 386 409 453 485 536 584 632
78 174 199 220 238 252 287 324 355 404 453 514 557 612 665
84 192 219 242 259 276 318 358 393 456 514 543 627 692
90 201 232 254 273 291 337 380 417 482 543 573 646
96 211 241 266 286 307 355 401 440 509 573 587 682
102 216 246 272 294 315 363 413 452 523 587 601
108 220 252 279 303 323 375 423 461 537 601
114 231 262 291 316 340 383 434 473 546
120 240 274 305 331 357 392 444 484 555
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 91 106 125 136 146 161 171 186 229 237 245 279 315 349 383
36 106 120 139 151 162 177 192 213 257 271 277 314 351 387 421
42 115 132 155 166 178 199 214 238 289 297 314 354 394 434 434
48 123 140 169 184 197 216 237 261 317 336 352 397 441 486 487
54 137 157 186 200 213 238 257 290 344 371 394 441 489 533 534
61 152 171 201 216 231 256 282 317 371 406 429 479 530 578 578
66 163 187 217 232 248 276 311 345 409 441 470 525 579 641 646
73 180 205 231 248 268 299 337 375 444 470 521 557 616 671 667
78 200 229 253 274 290 330 372 408 464 521 591 640 703 764
84 221 252 278 298 317 366 411 452 524 591 624 721 795
90 231 267 292 314 334 387 437 479 554 624 659 743
96 243 277 306 329 353 408 461 506 585 659 675 784
102 248 283 313 338 362 417 475 520 601 675 691
108 253 290 321 348 371 431 486 530 617 691
114 266 301 334 363 391 440 499 544 628
120 276 315 351 380 410 451 510 556 638
Delta Wood Cordless Surcharge (Maximum Length 84”)
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84
54 54 54 54 54 54 54 54 54 105 105 105 105
Deco Wood Valance
Sculptured Valance standard
on 2” Delta Wood blinds.
Deco Valance Shown with
Rout-less Wood Blind
11
Wood Horizontal Blinds
2” Delta Woods 2” Delta Woods Stained
3700-Natural 3701-Maple 3704-Golden Oak
3402-Rosewood 3707-Mahogany 3604-Walnut 3901-Espresso 7419-Black
*Due to weight limitations, blinds in the shaded area to the right of the dashed line are recommended to be manufactured two or
three blinds under one headrail. Blinds in this area will not be warrantied if made as one blind. To price multiple blinds under one
headrail, price each blind separately and add together for total cost.
Standard Features ◦ Valance, slat and bottom rail from hand selected kiln dried
hardwood
◦ Deco crown valance
◦ Trapeziod bottom rail
◦ Color coordinated components, ladders and cords
◦ Durable 2” x 2” steel headrail
◦ Limited Lifetime Warranty
◦ Standard valance returns for outside mount installation
2 3/4"
◦ Wand tilt, cord tilt optional (Effective December 15th 2018
Wand tilt will be standard, cord tilt will have to be
requested)
◦ Cord control lengths are 40% of blind length. Effective
December 15th 2018 this will be the new standard, however
a different cord length can be requested.
Optional items◦ Valance returns for inside mount installation no charge
when requested
◦ One common tilt control for multiple blinds (must be
requested)
◦ Cord tilter optional at no charge. Effective December 15th
2018 Wand tilt will be standard.
◦ Custom cord control lengths. Effective December 15th 2018
40% of blind length will be standard.
Surcharges◦ Multiple blinds under one head rail: price each blind
separately and add together
◦ Motorized tilt feature see page 18
◦ Cotton cloth tapes, 1” or 1 1/2”, 20% up charge, not
available in 2 ½” blinds or cordless
◦ Rout-less feature 2” slats, 15% up charge
◦ Extra valance material $3.80/ft. net cost
◦ Blinds under 12” have a $12.00 surcharge
◦ Cut outs per side or center $14.00
◦ Fire retardant finish is available by quotation
Special Notes ◦ Spacing between multiple blinds under one head rail is 1/4"
◦ Valance measurements are from inside miter to inside miter
◦ Standard valance returns for outside mount installation 2 3/4"
◦ Smallest return size is 1/2"
◦ Split controls only on blinds 12” - 22 1/2"
◦ Controls any position on blinds 22 5/8” (cord or wand tilt)
◦ Minimum width available is 9” (tilt only)
◦ Maximum single blind width is 78”; maximum overall width is 96”
◦ Minimum length is 12”
◦ Maximum length is 126”
◦ Maximum area is 45 sq.ft.
◦ Allowances:
Blind width (i.m./i.b.) 1/2"
Blind width (o.m./o.b.) exact
Blind length (i.m./i.b.) +/- 1/8"
Blind length (o.m./o.b.) +/- 1/8"
Cordless Option◦ Wand Tilt standard
◦ Single Blinds only, no multiple blinds on
one headrail
◦ Minimum width 17” O.M.
◦ Maximum single blind 84” x 84”
◦ Minimum length 24”
◦ Maximum length 84”
◦ Blinds may raise up to 1” when
completely lowered
◦ When blinds are completely raised the
stack may drop up to 3”
Stacking Chart (these are approximate
measurements)
2” Delta Woods
Cloth
Tapes
Braided
Ladder
12’’ 4” 4”
24” 5” 5”
36” 6” 5 7/8”
48” 7” 6 3/4”
60” 8 1/2” 7 5/8”
72” 10” 8 1/2”
84” 11 1/2” 9 5/8”
96” 13” 10 1/4”
108” 14 1/2” 11 3/8”
120” 16” 12 1/4”
Delta Wood Ladder/Tape
Schedule 2 Ladder 8 1/2”-36
3 Ladder 36 1/8”-58”
4 Ladder 58 1/8”-84”
5 Ladder 84 1/8”-108”
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 82 96 115 125 136 147 160 171 211 218 225 258 289 320 353
36 97 112 128 140 148 165 177 196 239 249 256 288 322 356 387
42 105 120 142 153 166 183 198 219 266 274 289 326 362 399 434
48 115 131 155 168 182 200 218 242 292 309 324 365 408 448 487
54 127 144 172 184 197 219 239 267 316 344 362 407 452 492 534
61 140 160 185 200 214 238 260 292 343 373 395 443 489 534 578
66 151 173 201 215 231 255 286 319 376 409 434 484 534 592 646
73 165 188 214 231 244 277 312 346 409 434 461 515 569 619 667
78 183 209 234 251 268 305 344 375 428 480 531 589 647 702
84 203 234 257 275 292 338 381 416 485 543 598 666 733
90 214 244 269 288 309 357 404 441 513 575 633 685
96 223 256 282 304 326 376 426 464 539 605 667 723
102 227 261 288 312 336 386 437 478 555 622 686
108 235 267 295 320 344 396 448 489 571 636
114 243 279 309 336 361 406 459 501 578
120 254 289 322 352 379 415 471 514 587
Delta Wood Cordless Surcharge (Maximum Length 84”)
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84
54 54 54 54 54 54 54 54 54 105 105 105 105
12
Faux Wood Horizontal Blinds
Avalon Faux Wood 2” Faux Wood Braided Ladder
FW-01 Bright White FW-02 Snow White FW-03 Antique White FW-04 Alabaster
EFW-01 Embossed Bright White EFW-02 Embossed Snow White EFW-03 Embossed Antique Whiite EFW- Embossed Alabaster
2 1/2” Faux Wood Braided Ladder
FW-02 Snow White FW-03 Antique White FW-04 Alabaster
*Due to weight limitations, blinds in the shaded area right of the dashed line are recommended to be manufactured 2 or 3 blinds
on 1 headrail. Blinds in this area will not be warrantied if made as one blind. To price multiple blinds under one headrail, price
each blind separately and add together for total cost.
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 70 76 82 90 98 109 116 125 135 151 174 182 192 222 252
36 76 82 90 102 108 121 130 140 149 167 191 207 222 252 281
42 81 90 102 108 114 130 142 152 159 180 205 224 243 271 301
48 90 99 108 114 123 140 152 164 173 197 222 242 260 291 321
54 97 105 114 123 133 151 164 173 191 211 237 259 281 310 338
61 102 111 121 131 143 157 173 186 199 225 255 278 300 330 358
66 108 116 130 142 152 170 184 198 213 253 270 295 320 347 377
73 115 124 136 149 159 180 193 211 226 255 289 316 341 370 400
78 121 131 144 156 168 191 208 222 242 269 304 331 356 393
85 124 135 148 160 174 196 213 230 247 277 313 342 370
90 127 140 152 166 179 199 219 237 253 284 323 354 384
96 141 152 167 182 197 220 242 260 280 316 352 388
102 146 158 175 191 205 230 252 271 292 330 368
108 152 166 182 198 215 242 262 282 304 344
114 157 173 192 208 223 252 274 296 316
120 164 178 200 216 231 263 287 309 326
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 73 78 85 93 101 112 120 130 140 155 179 188 198 229 259
36 78 85 93 105 111 124 133 144 154 171 197 212 229 259 289
42 84 93 105 111 118 133 145 156 164 186 211 231 249 280 310
48 93 102 111 118 126 144 156 169 178 203 229 248 268 300 330
54 100 109 118 126 137 155 169 178 197 218 245 267 289 320 349
61 105 114 124 134 147 162 178 191 205 232 263 286 309 340 368
66 111 120 133 146 156 176 189 204 220 260 279 303 329 358 389
73 119 127 141 154 164 186 199 218 233 263 298 325 352 381 412
78 124 134 148 160 173 197 213 229 248 278 314 341 366 404
85 127 140 153 166 179 202 220 236 255 285 322 353 381
90 132 144 156 170 185 205 225 245 260 292 333 364 396
96 145 156 171 188 203 226 248 268 288 325 362 399
102 151 163 180 197 211 236 259 280 301 340 379
108 156 170 188 204 222 248 269 290 314 355
114 162 178 198 213 230 259 282 304 325
120 169 184 207 223 237 270 296 319 336
Avalon Faux Wood Cordless Surcharge (Maximum Length 84”)
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84
54 54 54 54 54 54 54 54 54 105 105 105 105
13
Faux Wood Horizontal Blinds
Avalon Faux Wood 2” Faux Wood Embossed Wood Tones Braided Ladder EFW-06 Birch EFW-07 Maple EFW-08 Cherry EFW-09 Mahogany
2” Faux Wood Premium Printed Braided Ladder
PFW-351 Natural PFW-353 Pecan PFW-354 Oak PFW-356 Chestnut PFW-357 Mahogany
*Due to weight limitations, blinds in the shaded area to the right of the dashed line are recommended to be manufactured two or
three blinds under one headrail. Blinds in this area will not be warrantied if made as one blind. To price multiple blinds under one
headrail, price each blind separately and add together for total cost.
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 76 81 89 98 105 118 125 136 146 163 187 197 209 241 271
36 81 89 98 110 116 132 140 151 162 180 208 223 241 271 303
42 88 98 110 116 123 140 153 164 173 195 221 243 262 293 325
48 98 107 116 123 134 151 164 178 186 213 241 260 281 315 346
54 104 113 123 134 143 163 178 186 208 227 257 280 303 335 366
61 110 120 132 141 154 170 186 200 215 244 276 300 324 356 387
66 116 125 140 153 164 184 198 214 230 273 292 319 345 376 408
73 124 135 147 162 173 195 210 227 245 276 312 341 368 400 432
78 132 141 155 169 181 208 224 241 260 291 330 357 391 425
85 135 146 159 174 187 212 230 248 266 299 337 369 400
90 138 151 164 179 193 215 235 257 273 305 349 381 414
96 152 164 180 197 213 237 260 281 302 341 379 418
102 157 171 188 208 221 248 271 293 316 356 398
108 164 179 197 214 232 260 282 304 330 371
114 170 186 209 224 242 271 296 320 341
120 178 192 216 233 249 285 309 334 353
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84 90 96
Len
gth
to
: 30 81 88 97 105 113 125 135 146 156 175 200 212 223 257 292
36 88 97 105 118 124 141 149 162 174 193 222 240 257 292 326
42 96 105 118 124 133 149 164 176 186 209 237 260 281 315 351
48 105 114 124 133 143 162 176 190 199 229 257 280 302 337 371
54 112 122 133 143 154 175 190 199 222 245 277 301 326 360 393
61 118 130 141 151 166 182 199 215 231 262 296 322 347 382 415
66 124 135 149 164 176 197 213 230 247 293 314 342 370 403 437
73 134 145 157 174 186 209 224 245 263 296 335 367 396 430 464
78 141 151 167 181 195 222 241 257 280 313 354 384 412 456
85 145 156 173 187 200 227 247 266 287 321 363 397 430
90 148 162 176 191 208 231 254 277 293 329 410 410 445
96 163 176 193 212 229 255 280 302 325 367 408 449
102 170 184 203 222 237 266 292 315 338 382 427
108 176 191 212 230 249 280 303 327 354 400
114 182 199 223 241 259 292 319 343 367
120 190 207 232 252 268 304 332 359 378
Avalon Faux Wood Cordless Surcharge (Maximum Length 84”)
Width to: 21 24 29 32 36 42 48 54 60 66 72 78 84
54 54 54 54 54 54 54 54 54 105 105 105 105
14
Horizontal Blinds
Avalon Faux Wood Standard Features ◦ Valance, slat and bottom rail are manufactured from space age PVC foam along UV inhibitors to
provide longer color fastness with a UV rating of 500+ hours
◦ Flame retardant (meets NFPA small scale flame test)
◦ Moisture, heat and fade resistant
◦ Slats are solid color all the way through
◦ 2” Designer whites in both smooth and embossed finishes
along with optional wood stain finishes; 2 1/2" available in
smooth white finishes
◦ Trapeziod bottom rail
◦ Color coordinated components, ladders and cords
◦ Durable 2” x 2” steel headrail
◦ Limited Lifetime Warranty
◦ Wand tilt, cord tilt optional (Effective December 15th 2018 Wand tilt will be standard, cord tilt will have
to be requested)
◦ Cord control lengths are 40% of blind length. Effective December 15th 2018 this will be the new
standard, however a different cord length can be requested.
Optional items ◦ Valance returns for inside mount installation n/c when requested
◦ One common tilt control for multiple blinds (must be requested)
◦ Maxi wand length 60”, a clear wand is available after 60”
◦ Cord tilt optional, Effective December 15th 2018 Wand tilt will be standard, cord tilt will have to be
requested
◦ Custom cord control lengths. Effective December 15th 2018 40% of blind length will be standard.
Surcharges ◦ Multiple blinds under one head rail: price each blind separately and add together
◦ Motorized tilt feature see page 18 for options and price
◦ Cotton cloth tapes, 1” or 1 1/2”, 20% up charge
◦ Rout-less feature 2” slats, 15% up charge
◦ Blinds under 12” have a $12.00 surcharge
◦ Cut outs per side or center $14.00
Special Notes ◦ Standard valance returns for outside mount installation 2 3/4"
◦ Valance measurements are from inside miter to inside miter
◦ Spacing between multiple blinds under one head rail is 1/4"
◦ Smallest retun size is 1/2"
◦ Split controls only on blinds 12” - 22 1/2"
◦ Both controls available on one side (wand tilt only)
◦ Minimum width available 9” (tilt only)
◦ Maximum single blind width 78: overall with 96”
◦ Minimum length 12”
◦ Maximum length 120”
◦ Maximum area is 40 sq.ft.
◦ Allowances Blind width inside mount 1/2", length +/- 1/8”
Cordless Option ◦ Wand Tilt standard
◦ Single Blinds only, no multiple blinds on one headrail
◦ Minimum width 17” O.M.
◦ Maximum single blind 84” x 84”
◦ Minimum length 24”
◦ Maximum length 84”
◦ Blinds may raise up to 1” when completely lowered
◦ When blinds are completely raised the stack may drop up to 3”
Avalon Faux Wood
Stacking Chart (these are approximate
measurements)
Cloth
Tapes
Braided
Ladder
12’’ 4” 4”
24” 5” 5”
36” 6” 5 7/8”
48” 7” 6 3/4”
60” 8 1/2” 7 5/8”
72” 10” 8 1/2”
84” 11 1/2” 9 5/8”
96” 13” 10 1/4”
108” 14 1/2” 11 3/8”
120” 16” 12 1/4”
Avalon Faux Wood
Ladder/Tape Schedule 2 Ladder 9”-23 1/2"
3 Ladder 23 5/8”-37”
4 Ladder 37 1/8”-50 1/2”
5 Ladder 50 5/8”-64”
6 Ladder 64 1/8”-77 1/2”
7 Ladder 77 5/8”-91”
8 Ladder 82 1/8”-94”
15
Faux Wood Horizontal Blinds
Fast Faux 2” Cordless Fast Faux
FF02 White FF03 Antique White
Width to: 24 28 32 36 42 48 54 60 66 72
Len
gth
to
: 48 81 90 94 103 125 139 153 168 182 209
54 88 93 103 114 130 153 165 181 203 233
60 87 97 108 127 144 161 177 194 223 256
66 93 105 117 137 155 175 193 217 249 276
72 100 112 133 147 167 189 208 240 275 296
2” Express Cordless Fast Faux
FF02 White
Width to: 24 28 32 36 42 48 54 60 66 72
Len
gth
: 48 74 82 86 94 114 127 140 153 166 190
54 78 84 94 104 118 140
60 82 88 98 115 131 146 161 177 203 233
66 85 95 106 124 141
72 91 102 121 134 152 170 189 218 250 270
Specification Cordless Fast Faux Cordless Express Fast Faux
Customize Width & Length Width Only
Available Colors FF02 White & FF03 Antique white FF02 White only
Minimum Width 18” 18”
Minimum Length 36” 48”
Maximum Width 72” 72”
Maximum Length 72” 72”
Standard Features ◦ 2” Steel “low-profile” head rail
◦ 2” PVC foam standard rectangular bottom rail
◦ 2” Flat PVC foam 3mm slats (500 hour)
◦ 3 1/4” Crown PVC foam valance with groove for hidden plastic installation clip
◦ Custom returns available at no charge
◦ Easy operating wand tilter
◦ Braided ladder is 44mm
◦ Steel box brackets have a hinged face
◦ Standard controls only -tilt left
◦ Single blinds only (no 2 or 3 under one head rail) multiple blinds must be butted together
◦ All standard freight policies apply
◦ Blinds may raise up to 1” when completely lowered
◦ When blinds are completely raised the stack may drop up to 3”
◦ 1-Year limited warranty on head rail and components.
◦ 5 -year limited warranty on valance, slats and bottom rail.
Surcharges ◦ Common valance to cover multiple blinds - $2.00 per foot net
17
PVC Horizontal Blinds
2” PVC Fashion Plus 2” PVC
Standard II Curved
Width to: 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92
Len
gth
to
: 42 91 96 103 113 126 136 148 155 164 185 197 213 222 254 280
48 96 103 115 124 139 151 160 169 182 206 218 235 247 280 311
54 103 115 124 131 151 160 174 183 197 219 240 254 268 303 336
60 115 124 131 140 160 174 185 197 213 240 256 275 289 325 359
66 120 131 140 153 169 185 197 215 231 259 276 294 315 355 389
72 128 139 153 162 183 197 213 231 243 276 299 315 336 379 416
78 136 151 160 174 195 211 231 243 262 294 315 336 355 401 445
84 144 155 169 183 206 219 243 259 276 312 333 355 379 427 472
90 153 164 179 195 215 240 254 275 289 325 355 375 401 453 499
96 160 174 188 206 231 247 268 287 311 347 371 395 421 478 528
2” PVC
Cadiz Hampton Fresno Maderia Natural Weave Rustic Wilde Wood
Width to: 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92
Len
gth
to
: 42 175 185 197 213 237 255 277 299 316 358 379 405 429 483 531
48 185 200 220 232 261 281 300 323 341 393 421 440 476 531 583
54 197 220 237 255 286 309 331 346 375 423 455 483 514 583 640
60 216 232 246 269 300 331 357 380 408 455 489 520 556 624 689
66 232 251 269 293 326 354 375 408 431 489 520 558 596 669 743
72 246 266 289 311 346 375 408 432 493 520 566 599 640 720 794
78 255 281 300 331 365 405 431 466 528 556 596 640 674 767 846
84 277 296 320 346 393 423 451 489 556 589 635 674 720 812 899
90 289 313 341 365 412 455 484 520 583 620 669 714 757 858 952
96 300 331 362 367 431 475 512 553 620 658 707 751 801 905 1001
Faux Crown Valance
Width to: 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92
Retail 14 17 22 24 27 29 34 37 40 44 46 51 58 64 72
PVC Fashion Plus Cordless Option (Width up to 84” & Length up to 84”)
Width to: 23 26 29 32 36 40 44 48 52 57 62 67 72 82
Retail 54 54 54 54 54 54 54 54 54 54 54 105 105 105
*Due to weight limitations, blinds in the shaded area to the right of the dashed line are recommended to be manufactured two or
three blinds under one headrail. Blinds in this area will not be warrantied if made as one blind.
Standard Features ◦ Wand tilt, cord tilt optional (Effective December 15th 2018 Wand tilt will be standard, cord tilt will have to be requested)
◦ Standard II PVC blinds are manufactured with color coordinated steel head rail, bottom rail, cords and ladder, all other colors
will be manufactured with white or alabaster
◦ Cord control lengths are 40% of blind length. Effective December 15th 2018 this will be the new standard, however a different
cord length can be requested.
Surcharges ◦ Common valance to cover multiple blinds - $2.00/ft net
◦ Cut out per side $14
◦ Cut out center $21
◦ 2 on 1 headrail $40
◦ 3 on 1 headrail $54
◦ 1” & 1 1/2" tapes add 15% to price
◦ Vertical valance $2.25 per linear foot
◦ Striping charge $18 plus $9 each additional color
◦ Blinds under 12” $12 surcharge
2” Fashion Plus
Ladder/Tape Schedule 2 Ladder 8 1/2”-32
3 Ladder 32 1/8”-52”
4 Ladder 52 1/8”-72”
5 Ladder 72 1/8”-92”
6 Ladder 92 1/8”-112”
Cordless Option ◦ Wand Tilt standard
◦ Single Blinds only, no multiple blinds on one headrail
◦ Minimum width 17” O.B.
◦ Maximum single blind 84” x 84”
◦ Maximum length 84”
◦ Blinds may raise up to 1” when completely lowered
◦ When blinds are completely raised the stack may drop up to 3”
Special Notes ◦ Minimum Width 9” O.B.
◦ Minimum Length 6”
◦ Maximum Width 108” O.B.
◦ Maximum Length 96”
◦ Blinds <22” Split Controls (LR)
◦ Average Weight per Blind = approx.. 1.2 Lbs per Sq. Ft.
◦ Split Controls only on 12” – 22 1/2"
18
Horizontal Blinds
Tilt Motorization
12 Volt DC Battery Powered Tilt Motor
Remote control window coverings are so easy. With a push of a button you can watch as your
fashionable blinds tilt to conveniently provide shade from the sun. With the use of patented
Somfy technology there is no need for unsightly and expensive wiring.
Up to 30 lbs. suspended weight
• Size Standards:
2” Aluminum Maxi Blinds = 96 sq. ft.
2” Delta Wood Blinds = 54 sq. ft.
2” Avalon Fauxwood Blinds = 36 sq. ft.
• Minimum blind width 18”
• Range – 65 ft. line of site RTS
• Limited Lifetime Warranty
RTS Motor
• Motor installed $145 Net
• Single battery wand (batteries included) $55 Net
• Single battery wand (batteries not included) $24 Net
• 12 Volt DC Plug-in Transformer $89 Net
• Telis 1 RTS Remote (single channel) $56 Net
• Telis 4 RTS Remote (4 channel with all function) $73 Net
• Telis 16 RTS Remote (16 channel with all function) $230 Net
• DecoFlex 1 wall switch (single channel) $130 Net
• DecoFlex 2 wall switch (2 channel) $134 Net
• DecoFlex 5 wall switch (5 channel) $138 Net
• MyLink Wi-Fi to Radio Interface (Smart device compatible) $280 Net
• Solar Power Pack (batteries included) $115 Net
Parts
• Battery tube harness (connect 2 battery tubes) $2 Net
• 10” Battery extension cable $5 Net
• 48” Battery extension cable $6 Net
• 96” Battery extension cable $7 Net
19
Warranty
Delta Woods, Avalon Faux Wood and 2” PVC Fashions Plus
CACO, Inc. will extend a limited lifetime warranty on Delta Woods, a limited lifetime warranty on the head
rail and components for Avalon and 2” PVC Fashions Plus; a limited 5-year warranty on Avalon valance,
slats and bottom rail; a limited 3-year warranty on 2” PVC Fashions Plus valance and slats. Somfy 2”Tilt
Motor has a limited lifetime warranty. Each blind is warranted to be free from defects in materials and
workmanship to the original owner and limited to manually operated products only, provided that the
blinds were: 1.) Installed in a residential dwelling. 2.) Properly installed in accordance with the installation
instructions which accompany each blind to be installed in a window, door or other interior area for which
they were intended. 3.) Maintained and cleaned in compliance with the manufacturers
recommendations.
Damage resulting from misuse, abuse, exposure to the elements, including but not limited to exposure to
salty air, discoloration due to sunlight or passage of time, exposure to humidity, accidents, the use of
steam, bleach, or any caustic abrasive, or solvent based cleaners, alterations or normal wear and tear
upon the blinds are not covered by this warranty. Cord wear shall be considered as normal wear and
tear. Some minor warping, natural variations in the grain, color, fading or discoloration may occur within
time (these are considered part of the aging process for wood painted, stained and clear finishes) and
should not be deemed defective. Avalon Faux Wood blinds are manufactured with PVC foam and
contain no lead additives. Variations in grain and texture may appear randomly in slats, valance and
bottom rail. Slight variations in color, as well as minimal warping may also occur. These are all natural
occurring tendencies when dealing with PVC foam products and are considered acceptable. Returns
for the above mentioned reasons are not warranted.
Cordless Delta Woods, Avalon Faux Wood and 2” PVC Fashions Plus. CACO, Inc. will extend a limited 1-
year warranty on any blind built with the cordless option.
This warranty is exclusive and in lieu of all other obligations, liabilities, or warranties. In no event shall CACO
be liable or responsible for incidental or consequential damages, or for any other direct or indirect
damage, loss, cost, expense or fee. Some States do not allow the exclusion or limitations of incidental or
consequential damages, so this limitation may not apply to you.
This warranty gives you specific rights, and you may also have other rights, which vary from state to
state.
20
Warranty
Fast Faux
CACO, Inc. will extend a limited 1-year warranty on Fast Faux, a limited 5-year warranty valance, slats
and bottom rail. Each blind is warrantied to be free from defects in materials and workmanship to the
original owner and limited to manually operated products only, provided that the blinds were: 1.) Installed
in a residential dwelling. 2.) Properly installed in accordance with the installation instructions which
accompany each blind to be installed in a window, door or other interior area for which they were
intended. 3.) Maintained and cleaned in compliance with the manufacturers recommendations.
Damage resulting from misuse, abuse, exposure to the elements, including but not limited to exposure to
salty air, discoloration due to sunlight or passage of time, exposure to humidity, accidents, the use of
steam, bleach, or any caustic abrasive, or solvent based cleaners, alterations or normal wear and tear
upon the blinds are not covered by this warranty. Cord wear shall be considered as normal wear and
tear. Fast Faux blind products are manufactured with PVC foam and contain no lead additives. Variations
in grain and texture may appear randomly in slats, valance and bottom rail. Slight variations in color, as
well as minimal warping may also occur. These are all natural occurring tendencies when dealing with
PVC foam products and are considered acceptable. Returns for the above mentioned reasons are not
warrantied.
This warranty is exclusive and in lieu of all other obligations, liabilities, or warranties. In no event shall CACO
be liable or responsible for incidental or consequential damages, or for any other direct or indirect
damage, loss, cost, expense or fee. Some States do not allow the exclusion or limitations of incidental or
consequential damages, so this limitation may not apply to you.
This warranty gives you specific rights, and you may also have other rights, which vary from state to
state.
21
Aluminum Horizontal Blinds
Signature Series 2” Maxi Braided Ladder
Cloth Tape
2” Aluminum Cordless Option (Width up to 84” & Length up to 84”)
Width to: 23 26 29 32 36 40 44 48 52 57 62 67 72 82
Retail 54 54 54 54 54 54 54 54 54 54 54 105 105 105
Standard Features ◦ 2” wide .008 gauge slats in designer colors
◦ 2” X 2” heavy duty head rail
◦ Durable polyester color coordinated lift cord
◦ Fully enclosed bottom rail
◦ Wand tilt Standard, Cord tilt optional at no charge
◦ Standard valance and hold down brackets included at no charge
◦ Limited Lifetime Warranty
◦ For Color availability see page 27
◦ Cord control lengths are 40% of blind length. Effective December
15th 2018 this will be the new standard, however a different cord
length can be requested.
Cordless Option ◦ Wand Tilt standard
◦ Single Blinds only, no multiple blinds on one headrail
◦ Minimum width 17” O.B.
◦ Maximum single blind 84” x 84”
◦ Minimum length 24”
◦ Maximum length 84”
◦ Blinds may raise up to 1” when completely lowered
◦ When blinds are completely raised the stack may drop up
to 3”
Optional items ◦ Valance returns for inside mount installation no charge when requested
◦ One common tilt control for multiple blinds (must be requested, cord tilt recommended)
Surcharges ◦ Smallest width available on 9” tilt only.
◦ Blinds under 12” require a surcharge of $38
◦ 2 Blinds per head rail: less than 142 inches add $91; over 142-192 inches $105
◦ 3 Blinds per head rail: less than 142 inches add $115; over 142-192 inches-$170
◦ Spacing between blinds for 2 or 3 under one head rail is 1/4” Maximum single blind area is 35 sq. ft.
◦ Cutout per side $49
◦ Cutout center $66
◦ Striping blinds add $39.00 for the first extra color and $15.00 for each additional color. Sketch required for color positions..
◦ Double slatted blinds: 2 colors for a Duo-Color effect. Base price plus 50%. Specify color for convex (top) & concave (bottom).
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 120”
Len
gth
to
: 42” 89 98 102 112 124 133 144 154 164 186 198 212 223 253 277 318 342 375
48” 98 102 115 121 138 146 159 171 180 204 219 234 247 277 304 347 377 412
54” 102 115 122 132 146 160 174 182 196 221 239 253 269 303 336 378 411 446
60” 114 121 132 143 159 174 186 198 214 240 255 275 291 328 361 411 443 483
66” 120 131 143 153 174 186 198 216 225 257 275 293 313 352 388 437 476 519
72” 127 139 149 162 181 197 214 225 243 275 296 315 336 378 415 469 511 557
78” 133 146 160 174 194 211 224 243 260 293 316 336 355 401 443 499 542 591
84” 143 155 171 182 204 221 241 257 276 313 335 355 378 428 471 529 575 631
90” 149 164 177 192 217 237 254 275 291 328 352 377 399 452 499 559 608 664
96” 159 174 188 204 225 249 269 287 306 347 376 396 421 476 526 591 642 700
102” 165 181 197 214 240 260 281 303 323 363 396 415 443 501 556 621 675 737
108” 175 189 206 223 252 275 296 318 340 379 411 436 464 526 586 652 709 774
114” 181 198 217 234 261 285 312 335 355 399 428 458 488 552 608 685 742 809
120” 188 206 224 243 275 299 322 347 372 415 446 478 507 575 636 715 777 845
126” 196 217 236 254 278 313 337 363 388 433 466 499 532 600 664 744 808 880
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 120”
Len
gth
to
: 42” 104 113 118 131 143 154 168 179 189 217 229 245 259 294 321 369 396 434
48” 113 118 134 140 161 171 183 199 209 237 254 271 288 321 354 404 437 478
54” 118 134 142 152 171 184 202 212 227 256 277 294 313 352 389 438 476 518
60” 132 140 152 165 183 202 216 229 247 279 295 317 338 382 420 476 515 562
66” 140 152 165 178 201 216 229 251 262 299 319 340 363 408 452 505 553 603
72” 147 161 175 188 211 229 247 262 283 319 344 364 389 438 482 543 592 645
78” 154 171 184 202 224 244 261 283 302 340 366 389 413 465 516 580 629 686
84” 167 181 199 212 237 256 280 299 320 363 387 413 438 496 546 616 668 733
90” 175 189 205 223 252 275 294 317 339 382 408 437 464 524 578 651 706 771
96” 183 202 219 236 262 289 313 335 355 404 436 461 489 553 611 686 745 814
102” 192 211 229 247 279 302 325 352 376 422 459 482 515 582 645 721 783 856
108” 203 220 240 259 292 317 344 371 395 441 476 505 539 611 679 757 825 900
114” 211 229 252 271 304 331 361 387 413 464 498 532 566 640 706 796 862 940
120” 219 240 260 283 317 346 374 404 431 482 518 555 589 668 739 831 902 981
126” 227 252 274 294 331 363 392 421 452 503 541 580 617 697 771 865 940 1021
22
Aluminum Horizontal Blinds
Signature Series 1” Spectrum Privacy Spectrum 8
Spectrum 6
Standard Features ◦ 1” wide aluminum slats in designer colors
◦ The valance-less 1” x 1 1/2” durable steel, convexly shaped head rail provides a neat appearance when installed with hidden
brackets
◦ Spectrum’s head rail offers a built-in light blocking lip
◦ Wand tilter with clutch mechanism
◦ Control location tilter left, lift cord right
◦ Durable polyester color coordinated lift cords and color coordinated plastic components
◦ Almost invisible braided polyester color coordinated ladders with 18mm spacing
◦ Hidden route holes (complete privacy and room darkening)
◦ Limited Lifetime Warranty
◦ For Color availability see page 27
◦ Cord control lengths are 40% of blind length, however a different cord control length can be requested.
Optional items ◦ Valance returns for inside mount installation no charge when requested
◦ Control location options
Surcharges ◦ Perforated 30% surcharge
◦ Smallest width available on 5 1/2” tilt only.
◦ Blinds under 12” require a surcharge of $38 ◦ 2 Blinds per head rail: less than 142 inches add $91; over 142-192 inches $105
◦ 3 Blinds per head rail: less than 142 inches add $115; over 142-192 inches-$170
◦ Spacing between blinds for 2 or 3 under one head rail is 1/4” Maximum single blind area is 35 sq. ft.
◦ Cutout per side $49
◦ Cutout center $66 ◦ Striping blinds add $39.00 for the first extra color and $15.00 for each additional color. Identify color positions for slats with a
sketch and specify colors to be used for Head rail, Bottom rail, Braided Ladders and Cords.
◦ Double slatted blinds: 2 colors may be selected for a Duo-Color effect. Determine base price of blind and increase by 50%.
Specify color for convex (top) & concave (bottom), also for Head rail, Bottom rail, Cords, Braided Ladder and deluxe valance.
Cordless Options: Please note we are currently working on a cordless option.
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 120”
Len
gth
to
: 42” 82 89 96 103 115 124 133 143 153 173 183 197 206 238 257 292 317 344
48” 89 96 106 113 127 138 145 155 167 188 202 215 229 262 283 319 347 379
54” 96 106 114 120 138 146 160 169 181 205 219 234 247 284 311 348 378 414
60” 104 113 120 131 145 160 172 183 197 222 237 252 268 308 332 378 411 447
66” 109 120 131 142 157 172 183 198 211 238 253 272 288 332 359 404 440 479
72” 117 127 140 149 168 182 197 211 226 253 274 289 311 355 384 433 471 515
78” 124 138 146 160 180 195 209 226 241 272 289 311 328 379 412 461 500 548
84” 132 144 155 169 188 205 223 238 254 288 308 328 348 404 434 488 533 582
90” 140 153 167 179 200 218 235 252 271 302 326 347 369 426 459 518 563 613
96” 145 160 174 187 211 231 247 266 284 319 342 367 389 449 486 548 593 645
102” 154 168 182 197 222 241 259 280 299 337 361 384 411 471 513 573 625 682
108” 160 175 189 206 233 252 274 294 315 351 378 404 428 496 540 602 657 715
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 120”
Len
gth
to
: 42” 76 80 86 95 105 113 121 129 140 157 167 179 188 213 235 266 287 315
48” 80 86 97 104 116 124 134 142 151 173 183 197 208 235 259 291 315 345
54” 86 97 104 109 124 135 145 154 165 186 201 213 226 255 283 317 344 376
60” 96 104 109 119 134 145 156 167 180 202 215 232 243 277 303 344 374 408
66” 101 108 119 128 144 156 167 181 192 216 233 247 264 297 327 369 400 436
72” 106 116 127 137 153 166 180 192 205 233 249 264 283 317 351 395 431 469
78” 113 124 135 145 165 179 191 205 220 247 264 283 299 340 374 420 456 498
84” 120 131 142 154 173 186 203 216 234 262 281 299 317 360 396 446 486 529
90” 127 140 151 163 181 201 213 232 245 277 297 315 338 381 419 472 514 559
96” 134 145 159 172 192 208 226 242 259 291 313 335 355 401 444 498 541 589
102” 140 153 166 180 202 220 237 255 274 307 328 351 374 421 467 523 571 621
108” 145 160 174 188 211 232 249 269 286 320 344 367 391 444 492 549 597 652
23
Aluminum Horizontal Blinds
Signature Series 1” Summit Summit 8
Spectrum 6
Standard Features ◦ The valance-less 1” x 1 1/2” steel, convexly shaped head rail provides a neat appearance when installed with hidden brackets
◦ Summit’s head rail offers a built-in light blocking lip
◦ Operation precise and easy with snap-in components that include nickel-plated steel rollers for the lift cords to ride smoothly on
◦ Choice of 1” aluminum slats in either 6 or 8 gauge
◦ For Color availability see page 27
◦ Color coordinated braided ladder and lift cords
◦ 21.5 mm ladder spacing
◦ Color coordinated plastic components
◦ Hold down brackets included at no charge
◦ Limited Lifetime Warranty
◦ Cord control lengths are 40% of blind length, however a different cord control length can be requested.
Optional items ◦ Valance returns for inside mount installation no charge when requested
◦ Control location options
Surcharges ◦ Perforated 30% surcharge
◦ Smallest width available on 5 1/2” tilt only.
◦ Blinds under 12” require a surcharge of $38 ◦ 2 Blinds per head rail: less than 142 inches add $91; over 142-192 inches $105
◦ 3 Blinds per head rail: less than 142 inches add $115; over 142-192 inches-$170
◦ Spacing between blinds for 2 or 3 under one head rail is 1/4” Maximum single blind area is 35 sq. ft.
◦ Cutout per side $49; Cutout center $66 ◦ Striping blinds add $39.00 for the first extra color and $15.00 for each additional color. Identify color positions for slats with a
sketch and specify colors to be used for Head rail, Bottom rail, Braided Ladders and Cords.
◦ Double slatted blinds: 2 colors may be selected for a Duo-Color effect. Increase base price by 50%. Specify color for convex
(top) & concave (bottom), also for Head rail, Bottom rail, Cords, Braided Ladder and deluxe valance.
Cordless Options: Please note we are currently working on a cordless option.
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122” 132” 142”
Len
gth
to
: 42” 75 80 86 94 104 112 120 129 138 156 166 179 187 216 233 264 287 312 336 356
48” 80 86 97 102 115 124 132 141 152 172 183 195 207 238 257 289 315 343 367 392
54” 86 97 103 109 124 133 144 154 164 185 199 212 224 258 281 316 342 375 400 426
60” 95 102 109 118 132 144 156 166 179 201 215 228 243 280 301 342 373 405 434 462
66” 100 108 118 128 143 156 166 179 191 216 229 246 262 301 326 366 398 434 466 497
72” 106 116 127 136 153 165 179 191 205 229 248 262 281 322 347 393 426 466 498 533
78” 112 124 133 144 163 177 189 205 218 246 262 281 298 343 373 418 454 497 533 567
84” 119 131 141 154 172 185 203 216 231 261 280 298 316 366 394 443 483 526 564 601
90” 127 138 151 162 181 198 213 228 244 274 296 315 335 386 417 469 511 556 597 638
96” 132 144 158 171 191 208 224 241 258 289 309 333 353 407 440 497 538 585 628 674
102” 140 153 165 179 201 218 235 254 271 305 327 347 373 427 464 520 566 619 663
108” 145 158 172 187 211 228 248 266 285 318 342 366 388 449 489 545 595 648 697
114” 153 166 181 195 219 239 260 280 298 335 359 384 407 472 511 573 622 679
120” 158 172 188 205 228 249 269 291 312 347 375 400 425 493 534 597 652
126” 164 181 197 213 239 261 283 302 326 364 391 417 444 504 556 622 678
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122” 132” 142”
Len
gth
to
: 42” 71 76 81 89 98 105 113 120 132 146 156 167 177 199 219 248 269 294 316 336
48” 76 81 91 97 108 116 125 134 141 161 172 183 195 219 242 273 294 322 346 367
54” 81 91 98 102 116 126 136 144 154 174 187 199 213 239 265 296 321 351 377 402
60” 89 97 102 112 125 136 146 156 168 188 201 216 226 258 283 321 348 381 407 435
66” 95 102 112 120 135 146 156 169 179 202 217 232 246 278 306 345 375 408 438 466
72” 100 108 118 127 143 155 168 179 192 217 234 246 265 296 327 369 402 438 468 500
78” 105 116 126 136 154 167 179 192 205 232 246 265 279 317 349 392 425 465 500 535
84” 113 121 134 144 161 174 189 202 217 245 262 279 296 337 371 417 455 496 531 566
90” 118 132 140 152 169 187 200 216 229 258 278 294 315 356 392 441 480 523 561 600
96” 125 136 147 161 179 196 213 225 243 273 292 313 331 376 415 465 505 551 591 633
102” 132 143 155 168 188 205 221 239 255 287 307 327 348 393 437 489 534 581 625
108” 136 148 163 177 198 216 234 251 268 300 321 344 365 415 459 514 558 608 655
114” 143 156 169 183 206 223 244 262 279 315 338 361 382 435 480 537 584 638
120” 147 163 177 192 216 235 254 274 293 327 351 377 401 455 501 563 612
126” 154 169 185 200 223 245 266 284 306 343 366 392 417 473 523 585 636
24
Aluminum Horizontal Blinds
Signature Series 1” Catalina Catalina 8
Catalina 6
Standard Features ◦ 1” wide aluminum slats in designer colors
◦ 1” x 1 1/2” heavy duty head rail
◦ 21.5 mm ladder spacing
◦ Fully enclosed sculptured bottom rail
◦ Wand tilter with clutch mechanism
◦ Durable polyester color coordinated lift cords
◦ Almost invisible braided polyester color coordinated ladders
◦ For Color availability see page 27
◦ Cord control lengths are 40% of blind length, however a different cord control length can be requested.
Optional items◦ Valance returns for inside mount installation no charge when requested
◦ Control location options
Surcharges◦ Perforated 30% surcharge
◦ Smallest width available on 5 1/2” tilt only.
◦ Blinds under 12” require a surcharge of $38
◦ 2 Blinds per head rail: less than 142 inches add $91; over 142-192 inches $105
◦ 3 Blinds per head rail: less than 142 inches add $115; over 142-192 inches-$170
◦ Spacing between blinds for 2 or 3 under one head rail is 1/4” Maximum single blind area is 35 sq. ft.
◦ Cutout per side $49
◦ Cutout center $66
◦ Striping blinds add $39.00 for the first extra color and $15.00 for each additional color. Identify color positions for slats with a
sketch and specify colors to be used for Head rail, Bottom rail, Braided Ladders and Cords.
◦ Double slatted blinds: 2 colors may be selected for a Duo-Color effect. Determine base price of blind and increase by 50%.
Specify color for convex (top) & concave (bottom), also for Head rail, Bottom rail, Cords, Braided Ladder and deluxe valance.
Cordless Options Please note we are currently working on a cordless option.
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122” 132” 142”
Len
gth
to
: 42” 77 83 89 97 107 116 124 134 143 162 172 184 194 222 241 273 296 322 347 366
48” 83 89 100 105 119 129 136 145 156 177 188 201 215 246 266 299 324 354 379 404
54” 89 100 106 113 129 137 148 159 171 191 205 219 232 267 289 325 353 386 414 441
60” 98 105 113 122 136 148 161 172 184 207 221 236 251 288 312 353 384 418 447 477
66” 103 112 122 134 147 161 172 184 197 222 238 254 271 312 337 378 412 448 481 513
72” 109 119 132 140 157 171 184 197 212 238 256 272 289 332 359 406 441 481 514 551
78” 116 129 137 148 169 182 196 212 224 254 272 289 307 354 385 431 468 513 551 586
84” 122 136 145 159 177 191 209 222 238 271 288 307 325 378 406 457 499 543 583 621
90” 132 143 156 167 186 204 219 236 253 283 306 324 345 399 429 485 527 574 616 659
96” 136 148 163 176 197 215 232 249 266 299 319 344 364 420 455 513 556 604 648 696
102” 144 157 171 184 207 224 242 261 280 315 338 359 384 441 480 536 585 639 683
108” 149 163 178 194 217 236 256 276 294 327 353 378 401 463 505 563 615 669 720
114” 157 172 186 201 225 246 268 288 307 345 372 397 420 487 527 591 641 701
120” 163 178 195 212 236 257 279 300 321 359 386 414 440 509 552 617 672
126” 171 186 203 219 246 271 292 313 337 376 404 429 459 520 574 642 700
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122” 132” 142”
Len
gth
to
: 42” 71 75 81 88 98 105 113 120 131 146 155 167 176 198 219 248 268 293 315 335
48” 75 81 91 97 107 116 125 133 141 161 172 183 194 219 241 272 294 321 345 366
54” 81 91 98 102 116 126 136 144 154 174 187 198 212 238 264 296 320 349 376 400
60” 89 97 102 111 125 136 146 155 167 187 201 215 226 257 282 320 347 380 406 434
66” 95 101 111 119 135 146 155 169 179 202 216 231 245 277 305 344 374 407 437 465
72” 99 108 118 127 142 155 167 179 191 216 233 246 264 296 326 367 400 437 467 498
78” 105 116 126 136 153 166 178 191 205 231 246 264 278 316 348 391 424 464 498 533
84” 113 121 133 144 161 174 189 202 217 244 261 278 296 337 371 416 454 494 528 564
90” 118 131 140 151 169 186 199 215 227 257 277 294 315 355 391 440 479 521 560 598
96” 125 136 147 160 179 195 212 225 242 272 292 312 329 375 414 464 503 549 588 631
102” 132 142 155 167 187 205 220 238 254 286 306 326 347 392 436 487 532 578 623
108” 136 148 162 176 197 215 233 251 267 299 320 343 364 414 458 513 556 606 654
114” 142 155 169 183 206 223 244 261 278 315 337 360 381 434 479 536 583 636
120” 147 162 177 191 215 235 254 273 292 326 349 376 399 454 499 561 609
126” 154 169 185 199 223 244 265 283 305 342 365 391 416 471 521 583 634
25
Aluminum Horizontal Blinds
Signature Series 1” Malibu Malibu 8
Malibu 6
Standard Features ◦ 1” wide aluminum slats in designer colors
◦ 1” x 1 1/2” heavy duty head rail
◦ 22.5 mm ladder spacing
◦ Wand tilter with clutch mechanism
◦ Control location options
◦ Durable polyester color coordinated lift cords
◦ Almost invisible braided polyester color coordinated ladders
◦ For Color availability see page 27
◦ Cord control lengths are 40% of blind length, however a different cord control length can be requested.
Optional items◦ Valance returns for inside mount installation no charge when requested
◦ Control location options
Surcharges◦ Perforated 30% surcharge
◦ Smallest width available on 5 1/2” tilt only.
◦ Blinds under 12” require a surcharge of $38
◦ 2 Blinds per head rail: less than 142 inches add $91; over 142-192 inches $105
◦ 3 Blinds per head rail: less than 142 inches add $115; over 142-192 inches-$170
◦ Spacing between blinds for 2 or 3 under one head rail is 1/4” Maximum single blind area is 35 sq. ft.
◦ Cutout per side $49
◦ Cutout center $66
◦ Striping blinds add $39.00 for the first extra color and $15.00 for each additional color. Identify color positions for slats with a
sketch and specify colors to be used for Head rail, Bottom rail, Braided Ladders and Cords.
◦ Double slatted blinds: 2 colors may be selected for a Duo-Color effect. Determine base price of blind and increase by 50%.
Specify color for convex (top) & concave (bottom), also for Head rail, Bottom rail, Cords, Braided Ladder and deluxe valance.
Cordless Options
Please note we are currently working on a cordless option.
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122”
Len
gth
to
: 42” 71 75 81 86 98 105 113 121 131 146 156 167 177 198 219 248 271 293
48” 75 81 91 97 108 117 124 133 142 161 173 182 196 219 241 273 296 322
54” 81 91 97 103 117 125 136 144 155 175 186 198 212 238 264 296 322 352
60” 88 97 103 111 124 136 146 156 167 188 201 215 227 257 284 322 348 381
66” 95 103 111 121 136 146 156 169 179 202 216 232 246 278 306 344 375 407
72” 101 108 120 127 143 155 167 179 194 216 234 247 264 296 327 369 400 438
78” 105 117 125 136 154 166 179 194 205 232 247 264 279 316 351 393 426 465
84” 112 122 133 144 161 175 191 202 217 245 262 279 296 337 369 416 454 495
90” 120 131 141 152 172 185 200 215 231 257 278 296 314 356 392 442 481 523
96” 124 136 147 161 179 197 212 226 242 273 292 313 332 375 414 465 505 551
102” 131 143 155 167 188 205 221 238 254 286 307 327 348 393 437 488 533 582
108” 137 148 161 177 198 215 234 252 268 299 322 343 365 414 460 514 559 608
Width to: 23” 26” 29” 32” 36” 40” 44” 48” 52” 57” 62” 67” 72” 82” 92” 102” 112” 122”
Len
gth
to
: 42” 61 65 69 75 83 91 98 103 112 126 134 143 151 169 187 212 231 252
48” 65 69 77 82 93 100 106 114 120 137 146 157 166 187 207 233 252 276
54” 69 77 82 88 100 107 116 124 133 148 161 169 181 204 225 253 276 301
60” 76 82 88 96 106 116 125 134 144 162 172 184 195 220 242 276 297 326
66” 80 86 96 103 115 125 134 144 154 173 185 198 211 238 261 296 320 348
72” 85 94 102 108 122 133 144 154 164 185 200 212 225 253 280 316 343 376
78” 91 100 107 116 132 142 153 164 176 198 212 225 239 272 299 336 363 398
84” 97 104 114 124 137 148 163 173 185 209 224 239 253 287 317 356 388 423
90” 102 112 120 131 145 161 171 184 197 220 238 252 269 305 336 377 411 447
96” 106 116 127 137 154 166 181 194 207 233 249 267 283 321 354 398 433 471
102” 112 122 133 144 162 176 189 204 218 245 262 280 297 337 375 418 456 497
108” 116 127 139 151 169 184 200 215 231 255 276 294 313 354 393 438 478 520
26
Aluminum Horizontal Blinds
Signature Series 2” & 1” Aluminum Slat Count & Stacking Chart Slat count
Blind
Length
2”
Maxi
Spectrum
8/6
Summit
8/6
Catalina
8/6
Malibu
8/6
Blind
Length
2”
Maxi
Spectrum
8/6
Summit
8/6
Catalina
8/6
Malibu
8/6
Blind
Length
2”
Maxi
Spectrum
8/6
Summit
8/6
Catalina
8/6
Malibu
8/6
12 6 16 15 13 13 45 25 62 56 52 50 77 44 108 97 90 86
13 6 17 16 14 14 46 26 64 57 53 51 78 44 109 98 91 87
14 7 19 17 16 15 47 27 65 59 55 52 79 45 111 99 92 88
15 8 20 18 17 16 48 27 67 60 56 53 80 46 112 101 94 89
16 9 22 19 18 17 49 28 68 61 57 54 81 46 113 102 95 91
17 9 23 21 19 18 50 28 70 62 58 56 82 47 115 103 96 92
18 10 25 22 20 19 51 29 71 64 59 57 83 47 116 104 97 93
19 10 26 23 21 21 52 29 73 65 60 58 84 48 118 106 98 94
20 11 27 24 23 22 53 30 74 66 62 59 85 48 119 107 99 95
21 12 29 26 24 23 54 31 75 68 63 60 86 49 121 108 101 96
22 12 30 27 25 24 55 31 77 69 64 61 87 50 122 109 102 97
23 13 31 28 26 25 56 32 78 70 65 62 88 50 123 111 103 98
24 13 33 29 27 26 57 32 79 71 66 63 89 51 125 112 104 100
25 14 34 31 29 27 58 33 81 73 68 65 90 51 126 114 105 101
26 14 36 32 30 28 59 33 82 74 69 66 91 52 128 115 107 102
27 15 37 33 31 30 60 34 84 75 70 67 92 52 129 116 108 103
28 16 38 34 32 31 61 35 85 77 71 86 93 53 130 117 109 104
29 16 40 36 33 32 62 35 87 78 72 87 94 54 132 118 110 105
30 17 41 37 34 33 63 36 88 79 73 88 95 54 133 120 111 106
31 17 43 38 36 34 64 36 89 81 74 89 96 55 135 121 113 107
32 18 44 39 37 35 65 37 91 82 76 91 97 55 136 122 114 109
33 18 46 41 38 36 66 37 92 83 77 92 98 56 137 123 115 110
34 19 47 42 39 37 67 38 94 84 78 93 99 57 139 125 116 111
35 20 49 43 40 39 68 39 95 85 79 94 100 57 140 126 117 112
36 20 50 44 42 40 69 39 97 87 81 95 101 58 142 127 118 113
37 21 51 45 43 41 70 40 98 88 82 96 102 58 143 128 120 114
38 21 53 47 44 42 71 40 99 89 83 97 103 59 144 130 121 115
39 22 54 49 45 43 72 41 101 90 84 98 104 59 146 131 122 116
40 22 55 50 46 44 73 42 101 92 85 100 105 60 147 132 123 118
41 23 56 51 47 45 74 42 104 93 87 101 106 61 149 133 124 119
42 24 58 52 49 47 75 43 105 94 88 102 107 61 150 135 126 120
43 24 60 54 50 48 76 43 106 95 89 103 108 62 152 136 127 121
44 25 61 55 51 49
Stacking Chart (these are approximate measurements)
Blind
Length
2’ Aluminum Maxi
Braided Ladder
2’ Aluminum Maxi
Cloth Ladder Spectrum 8/6 Summit 8/6 Catalina 8/6
Malibu
8/6
24” 4 1/4” 5” 2 3/4” 2 3/4” 2 3/4” 2 3/4”
36” 4 1/2” 5 7/8” 3” 3” 3” 3”
48” 4 5/8” 6 3/4” 3 1/4” 3 1/4” 3 1/4” 3 1/4”
60” 5 1/8” 7 5/8” 3 5/8” 3 1/2” 3 1/2” 3 1/2”
72” 5 3/8” 8 1/2” 3 7/8” 3 7/8” 3 7/8” 3 3/4”
84” 5 5/8” 9 5/8” 4 1/4” 4 1/8” 4 1/8” 4”
96” 5 7/8” 10 1/4” 4 1/2” 4 5/8” 4 3/8” 4 1/4”
108” 6 1/8” 11 3/8” 4 7/8” 4 7/8” 4 3/4” 4 5/8”
120” 6 1/2” 12 1/4” 5 1/4” 5 1/8” 5” 4 7/8”
27
Horizontal Blinds
2” & 1” Available Aluminum Slat Colors
Color 2” Maxi 1” Spectrum 6/ 8 1” Summit 6/ 8 1” Catalina 8 1” Catalina 6 1” Malibu 8 1” Malibu 6
C001 White A+ *DP A+ *DP A+ *DP A+ *DP A+ *DP A+ *DP
C005 White Gloss A
C006 Raw Umber A *DP A *DP
C026 Smokey Grey A A *DP A *DP A *DP A *DP A *DP A *DP
C031 Fawn A A *DP A *DP A *DP A *DP
C034 Aluminum A *DP A *DP A *DP A *DP A *DP A *DP
C042 Matte White A+ *DP A+ *DP A+ *DP A+ *DP
C062 Char Brown A A *DP A *DP A *DP A *DP A *DP A *DP
C065 Almost Gloss White C+
C069 Dove Grey A *DP A *DP
C100 Vanilla A *DP A *DP
C112 Alabaster A A *DP A *DP A *DP A *DP A *DP A *DP
C121 Brushed Aluminum A A *DP A *DP A *DP A *DP
C205 White Satin A A *DP A *DP
C233 Black Satin A A *DP A *DP A *DP A *DP
C386 Snow Cap A A *DP A *DP A *DP A *DP A *DP A *DP
C544 True White A+ *DP 6 Only A+ *DP 6 Only A+ *DP A+ *DP
C771 Mercury A
Perforated Colors 8 Gauge only
AP005 White Gloss A 8 only A A
AP010 Grey A+ 8 only A+ A+
AP033 Pitch Black A+ 8 only A+ A+
AP064 Aluminum Texture A+ 8 only A+ A+
AP112 Alabaster A 8 only A A
Legend:
A Available C+ Contract orders only *DP Dust Protector
A+ Available (Head rail, bottom rail and brackets will be matched as close as possible to slat color
28
Warranty
Signature Series Aluminum
There is a limited lifetime warranty on corded Signature Series horizontal aluminum blind that is properly
installed in a residential dwelling. Each blind is warrantied to be free from defective components and
workmanship for as long as the blind remains installed as originally intended and is owned by the original
consumer.
Damage resulting from misuse, abuse, exposure to the elements, including, but not limited to exposure to
salty air, humidity, discoloration due to sunlight or passage of time, accidents, the use of steam, bleach,
or any caustic or abrasive or solvent based cleaners, alterations or normal wear and tear are not covered
by this warranty.
Cordless Signature Series Blinds. CACO, Inc. will extend a limited 1-year warranty on any blind built with
the cordless option.
The obligation of CACO’s Signature Series Blinds and its distributors is limited to repair or replacement of
the blinds or components found to be defective, at our option, provided the blinds are returned to an
authorized CACO dealer or distributor and accompanied by “proof of purchase”. CACO is not
responsible for any labor costs associated with fabricating alterations, measuring, or installation and to
include shipping charges.
This warranty does not include any conditions resulting from damages caused by accidents, alterations,
misuse, or failure to follow instructions with respect to measurement, installation, cleaning or
maintenance.
Commercial Pricelist – Installation Services Installer fee per blind/shade 0” – 48” $21.67
Installer fee per blind/shade 49” – 60” $25.79
Installer fee per blind/shade 61” – 72” $27.85
Installer fee per blind/shade 73” – 84” $31.98
Installer fee per blind/shade 85” – 96” $35.07
Installer fee per blind/shade 97” – 108” $37.13
Installer fee per blind/shade 109” – 120” $46.42
Installer fee per blind/shade 121” – 132” $52.61
Installer fee per blind/shade 133” – 144” $58.80
Prices effective 03/24/2021