Simulation Editor Basic Features
description
Transcript of Simulation Editor Basic Features
Simulation EditorSimulation EditorBasic FeaturesBasic Features
Simulation EditorSimulation EditorBasic FeaturesBasic Features
FRAMES-2.0 WorkshopU.S. Nuclear Regulatory Commission
Bethesda, MarylandNovember 15-16, 2007
Pacific Northwest National LaboratoryRichland, Washington
2
PurposePurposePurposePurpose
Visually constructs a Conceptual Site Model
Documents comments
Limit changes to the CSM
Chooses models
Locks in models
Describes how models communicate with one another
Provides user friendly interfaces for Choosing models Locking in models Inputting user-defined data Viewing graphical or tabular output results
Allows for Monte Carlo analyses
3
Global Workspace:Information available to all modules in the Local Workspace
Local Workspace
Icons
Logo
Tool Bar
4
Provides the user with an opportunity to make notes about a simulation. This is very handy, especially if the user has a series of runs with titles like run1, run2, run3, etc. The user can log the differences in the simulations using the Comments section.
5
Customize Menu:Customizes the look and feel of the workspace in the Simulation Editor
Icon Traffic Light:• Black: Icon chosen• Red: Model chosen• Yellow: Data InputYellow: Data Input• Green: Run successful
6
CorrespondingIcons
The Object Id is the system’s referencing nomenclature.
User-definedName
7
DATABASES• Geospatial Place Holder• Constituent selector and properties• Aquatic Benchmarks (e.g., ERED) by effect and constituent (mg/kg)• Aquatic Organism selector and physical properties (e.g., ERED)• Currently not deployedMODELS• Real-world media transport modules• User-Defined (i.e., known) input to any model• Superimposes output from multiple modules• Synchronizes initial time and time-varying output from multiple modules• Exposure, Intake, Risk/Hazard/Dose modules• Summarizes GENII Results• Risk Assessment Guidelines for Superfund Tables• Ecological Hazard Quotients (WEAP)• Illustrative Example of Stand-alone modulesSYSTEM• Sensitivity/Uncertainty Modules (Sampler, Iterator, Summarizer)VIEWERS• Graphical and Tabular Viewers
Icon Palette
8
MEPAS 5.0 Source in an AquiferThis is a user-defined personalized note associated with the Source module. These notes are constructed by the user and will be displayed when the curser is held over the icon, when "Show Notes" is checked under the Customize menu.
9
10
ToolsProvides the user with one location for tools that allow easy application of programs.
Help
11
Connect/Disconnect linkageLock model in IconUser-defined personalized note for iconChoose model and nameInput user-defined dataRun model executableDelete IconGraphical/Tabular viewers of output
Right-Click Over Icon
12
Right-Click Over Icon
13
User chooses model
General Info
14
Applicable Models
Non-applicable Models
General Info
15
Model Description:Describes the model, how the model works, who to contact, etc.
Scheme Properties:Presents a description of the schemes
Consumes/Produces:Documents the DICs that the model• consumes• produces
General Info User Interface