Simpson Strongtie Concrete Repair and Strengthening Systems

(800) 999‑5099

www.strongtie.com

Repair, Protection and Strengthening Systems for Concrete and Masonry

Product Guide

F‑R‑PG13

2 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999‑5099 | strongtie.com

Repair Protect

Strengthen

Repair, Protection and Strengthening Systems for Concrete and MasonryRepair, Protection and Strengthening Systems for Concrete and Masonry

3F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999‑5099 | strongtie.com

A Shared Commitment to Innovation …

In 2011, Simpson Strong-Tie acquired Fox Industries, Inc., a company founded in 1969 by Douglas Fox that produces a wide range of products that repair, protect and strengthen concrete, masonry, steel and wood structures. This acquisition supports our ongoing strategy to expand our product offering for the global industrial, commercial and infrastructure markets.

Stronger Together

Since entering the anchoring industry in 1994, Simpson Strong-Tie has become a trusted manufacturer of chemical, mechanical and direct-fastening product solutions for residential, industrial and commercial markets. Our history and demonstrated expertise in development, testing and manufacturing of highly-technical, performance-critical products are now joined by Fox Industries’ 40+ years of experience of producing innovative, contractor-tested product solutions. This experience, proven track record, and experienced field and technical support allows Simpson Strong-Tie to offer our unique brand of service to customers in industrial, commercial and infrastructure markets. We are proud to introduce our Repair, Protection and Strengthening Systems for Concrete and Masonry.

FOX INDUSTRIESE N G I N E E R E D P R O D U C T S

®



The Simpson Strong-Tie Company Inc. was founded in Oakland, California and has been manufacturing wood-to-wood and wood-to-concrete connectors since 1956. Since then, Simpson Strong-Tie has grown to be the world’s largest manufacturer of construction connectors. In recent years the company’s growth has included expanding its product offering to include pre-manufactured shearwalls, anchor systems for concrete and masonry, collated fastening systems and repair, protection and strengthening systems for concrete and masonry.

Simpson Strong-Tie Company Inc. services include:• Quality products value-engineered for the lowest installed

cost at the highest rated performance levels.• Most thoroughly tested and evaluated products in the industry.• Strategically-located manufacturing and/or warehouse facilities.• Field Engineering support.• National code agency listings.• National factory sales team.• In-house R&D, and tool and die professionals.• In-house product testing and quality control engineers.• Member of ACI, AITC, ASTM, ASCE, CAMA, CSI, ICC,

ICRI, NBMDA, NLBMDA, PATMI, SETMA, STAFDA, NFBA, WTCA and local organizations.

• Various D.O.T. approvals.

Simpson Strong‑Tie Quality PolicyWe help people build safer structures economically. We do this by designing, engineering and manufacturing “No Equal” structural connectors and other related products that meet or exceed our customers’ needs and expectations.Everyone is responsible for product quality and is committed to ensuring the effectiveness of the Quality Management System.

Karen Colonias Chief Executive Officer

Terry Kingsfather President

Limited WarrantyThis Limited Warranty must be read in conjunction with the information and specifications in this catalog and on the www.strongtie.com website, including the General Notes, General Instructions for the Installer, General Instructions for the Designer, General Principles of Products and Services, Building Codes, Corrosion Information and Terms & Conditions of Sale, along with any other information or specifications published by Simpson Strong-Tie Company Inc. This Limited Warranty is effective as of the date of publication of this catalog. Please consult www.strongtie.com for the warranty information applicable on the date of purchase. Unless otherwise noted below, this Limited Warranty applies to all Simpson Strong-Tie® products (“Products”).Simpson Strong-Tie Company Inc. warrants each Product to be free from defects in materials, manufacturing and design when properly specified, installed, and maintained, and when used in accordance with the design limits and the structural, technical, and environmental specifications on the website, in this catalog or on the Product package or label. This warranty is void and does not apply to (a) any Product purchased from an unauthorized dealer, retailer or distributor, (b) deterioration or defects in any Product due to environmental conditions or inadequate or improper maintenance, (c) any failure or defect caused by improper installation, (d) any use of a Product in temperatures and environmental conditions outside the ranges specified for such Product on the website, in this catalog or on the Product package or label, (e) any use of a Product outside of its shelf-life specifications, (f) any failure or damage caused by a third-party product, (g) any use of a Product in a structure that does not comply with all applicable building codes, laws, rules and regulations, or (h) any non-catalog or modified ProductSimpson Strong-Tie® Products are designed for a wide variety of structural and non-structural uses. Each Product is designed for the load capacities and uses listed on the website, in this catalog or on the Product package or label. Additional performance limitations for specific Products may be listed on the website, in this catalog or on the Product package or label. All applicable specifications must be carefully reviewed before using any Product. Simpson Strong-Tie Company Inc. assumes no liability for confirming that any Product is appropriate for an intended use, and each intended use of a Product must be reviewed and approved by qualified professionals.Due to the particular characteristics of potential impact events such as earthquakes and high velocity winds, the specific design and location of the

structure, the building materials used, the quality of construction, or the condition of the soils or substrates involved, damage may nonetheless result to a structure and its contents even if the loads resulting from the impact event do not exceed Simpson Strong-Tie Company Inc.’s specifications and the Products are properly installed in accordance with applicable building codes, laws, rules and regulations.Product demonstrations and similar services provided by Simpson Strong-Tie Company Inc. are based on Simpson Strong-Tie Company Inc.’s present knowledge and experience, are conducted for illustrative or instructive purposes only, do not constitute a warranty of Product capabilities or specifications and do not modify the applicable warranty set forth herein. Simpson Strong-Tie Company Inc. assumes no liability for any representations or statements during such Product demonstrations or other similar services. In the event of any inconsistency between any information provided during any such demonstration or service, and the information in this catalog, on the Product package or label or on the website, the information in this catalog, on the Product package or label or on the website shall govern.All warranty obligations of Simpson Strong-Tie Company Inc. Shall be limited, at its discretion, to either repairing the defective product or providing a replacement for the defective product. This remedy constitutes Simpson Strong-Tie Company Inc. sole obligation and liability and the sole and exclusive remedy of purchaser.The limited warranty herein is expressly in lieu of all other warranties, and, where lawful, Simpson Strong-Tie Company Inc. Disclaims all other warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose and warranties arising from course of performance, course of dealing or trade usage. In no event will Simpson Strong-Tie Company Inc. Be liable for incidental, consequential, punitive or special damages or direct or indirect loss of any kind, including but not limited to property damage and personal injury. Simpson Strong-Tie Company Inc. entire liability is limited to the purchase price of the defective product. Some states do not allow limitations on implied warranties, or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply. This limited warranty gives specific legal rights. Other rights that vary from state to state may be applicable.



General PrinciplesAssessment, Planning, Preparation, Execution . . . . . . . . . . . . . . .6–7Causes of Concrete Deterioration . . . . . . . . . . . . . . . . . . . . . . . . .8–9

General Concrete RepairMetal Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11Bonding Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–13Repair Mortars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–18Repair Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Admixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Crack RepairEpoxy (Low Viscosity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21–25Epoxy (Gel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Methyl Methacrylate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27ETI Cartridge Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28ETI Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Non-Structural Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30–32

Joint SealingPrimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Flexible Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34–36Semi‑Rigid Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Performance CoatingCementitious Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38–39Epoxy Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40–46Water Repellents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47–48Decorative/Protective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49–51

Specialty ProductsRail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52–56Grouts (Cementious) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57–58Grouts (Epoxy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59FX‑70® Structural Repair and Protection System . . . . . . . . . . . .60–61Underwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Epoxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64‑65Curing Compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

21–29Crack Repair

52–65Specialty Products

10–20General Concrete Repair

38–51Performance Coating

33–37

Non-Structural Injection

Joint Sealing

30–32

This Product Guide does not provide complete installation and safety information. For detailed information regarding product use, surface preparation, mixing, application, limitations, and safety warnings, refer to the Product Data Sheet(s), Material Safety Data Sheet(s) and other information and specifications available at www.strongtie.com or by calling (800) 999-5099. It is the responsibility of each purchaser and user of each Product to determine the suitability of the Product for its intended use. Prior to using any Product, consult a qualified design professional for advice regarding the suitability and use of the Product, including whether the capacity of any structural building element may be impacted by a repair. As jobsite conditions vary greatly, a small-scale test patch is required to verify product suitability prior to full-scale application. The installer must read, understand and follow all written instructions and warnings contained on the product label(s), Product Data Sheet(s), Material Safety Data Sheet(s) and the www.strongtie.com website prior to use. For industrial use only by qualified applicators. Proposition 65: Products contained within this document contain materials listed by the state of California as known to cause cancer, birth defects, or reproductive harm. KEEP OUT OF REACH OF CHILDREN!



Because each jobsite presents a unique challenge, your local Simpson Strong-Tie representative is available to help you evaluate the condition and develop a customized product selection and repair plan based upon:• Type of failure• Physical access considerations• Downtime or in-service

time requirements• Budget• Site considerations

1. AssessmentBefore initiating any RPS plan, it is imperative to conduct a thorough evaluation of the substrate or structure to be repaired. Many factors can contribute to the deterioration of concrete and masonry structures, including poor worksmanship or design, cracking, embedded-metal corrosion, delaminations and others. Properly assessing the deterioration and its cause should involve a qualified engineer who can determine if the design capacity of the structure has been impacted and what implications it may have on the repair strategy. Other factors to consider are access to the repair site, time to complete the repair, impact on operations, budget and others. A thorough assessment of all factors will help develop the best repair strategy for the building owner.

Repair, protection and strengthening of concrete and masonry is a complex procedure that presents unique challenges on every jobsite. Following the four-step process of assessment, planning, preparation and execution increases the likelihood of an efficient, successful repair.

General Principles

2. Planning



A well-executed plan, implemented by well-qualified contractors trained in the application of the products being used will result in a successful repair. Simpson Strong-Tie offers workshop and on-site training and support by field representatives with decades of field experience. Contact your local representative, call 800-999-5099, or visit www.strongtie.com for more information.

3. Preparation

Execution of these steps will increase the likelihood of a successful and lasting repair.

4. Execution

The success of any repair program depends heavily on proper preparation of the site to be repaired. Factors to consider include:• Implementing a safety program• Limiting access to the site• Demolition and removal of damaged

building components or systems• Surface preparation of substrate• Proper staging and storage

of repair materials• Proper mixing of the selected

repair materials



In order to effectively assess, plan, prepare and execute a successful repair, protection and strengthening (RPS) strategy for concrete and/or masonry, it is important to understand the root cause of the deterioration. Understanding the service conditions of the structure and matching the appropriate product(s) to the performance requirements of the project will ensure a lasting repair tailored to the specific needs of the owner.

The two main factors that influence concrete performance are:

• Placement Issues (this page) • Service Condition Issues (see p.9)

Concrete failures can be the result of a combination of placement and/or service condition issues. Cracking, spalling, leaking, premature or excessive wear, scaling, settlement, deflection and disintegration are examples of conditions that lead to concrete failure. Understanding these failure modes and their root cause is necessary to develop a successful repair strategy.

Placement IssuesProper concrete placement is essential to not only satisfy the design and service requirements of the structure, but also to reduce the potential for premature deterioration and reduction of expected lifespan. Identifying defects in the assessment stage of an RPS project is important in order to develop the proper repair plan to address the specific cause of the damaged concrete.

One of the most common defects in concrete is cracking. Cracking can be caused by inadequate substrate or sub-base preparation, high water-to-cement ratio, improper curing methods, poor concrete consolidation, timing of control-joint installation and many other placement factors. Cracking can also be caused by design-related issues such as inadequate reinforcement or insufficient control-joint spacing.

Excess water increases the water-to-cement ratio of concrete and increases workability; however, this benefit is not without cost. The additional water eventually evaporates in the hydration (curing) process, leaving a porous network of capillary voids and lower overall strength.

Excess water can also lead to segregation, or the settling of large aggregates to the bottom of the matrix, resulting in reduced structural capacity and increased likelihood of cracking.

Proper curing involves maintaining an adequate moisture content and temperature in freshly placed concrete to allow for full hydration (curing) of the cement while the concrete develops its intended design strength. The absence of moisture stops the hydration process which can lead to lower strengths. Rapid moisture loss of freshly-placed concrete can also lead to plastic shrinkage cracking, which are random shallow cracks on the surface of the concrete.

Poor consolidation can result from improper vibration and/or poor mix design. If the concrete does not fully consolidate around the reinforcing steel, design capacity may not be reached, and cracking can result.

Concrete expands and contracts with temperature changes. When these contraction forces exceed the tensile strength of the concrete, cracking can occur. To influence where this cracking will occur, control joints are installed, but the design and timing of control-joint installation are vital to their effectiveness.

Reinforcing steel (rebar) is used to increase the tensile strength of concrete. When tensile forces acting upon a concrete element exceed its tensile strength a crack may occur. Reinforcing steel controls the width of the crack and can prevent complete failure of the element.

Causes of Concrete Deterioration

When planning an RPS strategy for deteriorated concrete, one must consider and address the following in‑service factors:

• Environmental conditions

• Chemical exposure

• Exposure to water and mobile debris

• Concrete properties (strength, type, aggregate, etc.)

Common placement issues with concrete:Bug HolesCause: Entrapment of air bubbles on the formed concrete surface.Effect: Uneven concrete surface, increased porosity due to increased surface area, and poor appearance.

Rock PocketsCause: Improper consolidation between large aggregates and cement mortar during the placement process creates large voids in concrete.Effect: Reduction in strength and increased potential for water intrusion, corrosion of reinforcing steel and reduced abrasion resistance.

HoneycombingCause: Improper consolidation of concrete due to lack of vibration or improper mix design.Effect: Reduction in strength and increased potential for water intrusion, corrosion of reinforcing steel and reduced abrasion resistance.

Cold JointsCause: Delays in concrete placement where the initial lift of concrete hardens before subsequent lifts are placed, resulting in a visible lineation and substandard bond between layers. Effect: Water intrusion through the cold joint and corrosion of reinforcing steel.



Chemical AttackCauses: Exposure to acid rain, de-icing salts, in-service chemicals and naturally occurring sulfates in soils and ground water dissolve the cement matrix which results in aggregate loss.

Effects: Loss of concrete cover and subsequent corrosion of reinforcing steel.

Assessing potential exposure before construction or repair can prevent premature deterioration. Specific cement types, water-repellent sealers or chemically-resistant barrier coatings are all common preventative measures to protect concrete against chemical attack.

Alkali-Aggregate ReactionCause: A chemical reaction between the alkali in cement and high-silica content aggregate forms a gel around the aggregate, preventing proper bond between the aggregate and cement.

Effects: The gel expands in the presence of water, creating tension cracking around surface aggregate and delaminations. Surface cracking promotes water intrusion which can lead to metal corrosion and spalling.

Careful selection of aggregates and consideration of silica content can help prevent alkali-aggregate reactions.

Erosion/AbrasionCauses: Airborne or waterborne debris moving across the concrete surface.

Effects: Progressive section loss can lead to inadequate concrete cover and corrosion of the reinforcing steel, reducing structural capacity.

High-strength, dense concrete and specialty abrasion-resistant coatings are the most effective means to resist erosion and abrasion.

Service Condition IssuesCommon service condition issues with concrete:

Corrosion of MetalsCauses: Chloride intrusion, oxygen-water exposure, corrosive chemical environment surrounding reinforcing steel, drop in alkalinity, improper rebar placement.

Effects: Corrosion and subsequent expansion of reinforcing steel leads to cracking and spalling, reducing the structural capacity of the concrete.

Using concrete with a low water-to-cement ratio and proper rebar placement with adequate concrete cover are common measures used to prevent metal corrosion.

Freeze-Thaw Causes: Water-saturated concrete, combined with temperature cycling above and below 32°F (0°C).

Effects: Concrete absorbs water into its pores. When the water in the pores freezes, it expands, causing scaling and delaminations.

High-strength concrete mix designs that incorporate air-entraining admixtures yield the best defense against freeze-thaw damage. Specialty coatings and water repellents are also commonly used to minimize water absorption and prevent freeze-thaw damage.


10 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999‑5099 | strongtie.com10

METAL PRIMERS

Concrete RepairGeneral

Where to Use• Priming reinforcing steel to

protect against corrosion• As a corrosion‑resistant steel primer

for protective coating systems

Features• High zinc content provides superior

corrosion protection of steel• Excellent bond to steel• Can be shop or field applied• Ready to use, simply stir and apply• Single‑component product• Fast drying

Application Rate• 4–5 DFT mils total applied in two coats • 300‑400 ft.2/gal. (7.3‑9.8 m2/L) per

coat depending on surface profile• 775–1,000 lin. ft./gal. (60–80 m/L) for #4 rebar• 600–825 lin. ft./gal. (45–65 m/L) for #5 rebar

Limitations• Do not apply to surfaces below 45°F (7°C)• Do not apply to surfaces above 95°F (35°C)• Not recommended for use under

high‑solvent, low‑solids coatings or lacquer‑type products

• Do not apply to damp or wet surfaces

FX‑406Zinc‑Rich Primer

FX‑406 Zinc‑Rich Primer is a single‑component, fast‑drying, zinc‑rich coating designed to protect steel from corrosion by combining a barrier coating with the sacrificial galvanic protection of zinc.

Packaging / SKU• 1 quart can

(FX406‑QT)• 1 gallon can

(FX406‑1)

ColorGray

StorageStore dry between 40–95°F (4–35°C)

Shelf Life2 years in unopened packaging

CSI Specification 03 01 20 Maintenance of Concrete Reinforcing



Ge

neral C

on

crete Re

pair

METAL PRIMERS

Where to Use• Priming reinforcing steel to

protect against corrosion• To prime and protect reinforcing steel

subject to immersion conditions• For additional protection of steel

in corrosive environments such as marine structures, areas subject to de‑icing salts, chemical plants, etc

• As a corrosion‑resistant steel primer for protective coating systems

Features• 6‑hour pot life at 72°F (22°C)• Can be applied by brush, roller or spray• High performance for immersion applications• Superior chemical and solvent resistance

to single‑component zinc primers• High zinc content provides superior

corrosion protection of steel• Excellent bond to steel• Can be shop or field applied

Application Rate• 4–5 DFT mils total applied in two coats • 375–450 ft.2/gal. (9.2–11 m2/L) per

coat depending on surface profile.• 950–1,150 lin. ft./gal. (75–90 m/L) for #4 rebar• 775–950 lin. ft./gal. (60–75 m/L) for #5 rebar

Limitations• Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C)• Do not thin• Do not apply to damp or wet surfaces• Do not apply in thickness greater

than 5 mils DFT per coat

FX‑408Zinc‑Rich Epoxy Primer

FX‑408 Zinc‑Rich Epoxy Primer is a two‑component, zinc‑rich coating designed to protect steel from corrosion by combining a chemical‑resistant epoxy barrier coating with the sacrificial galvanic protection of zinc.

Packaging / SKU1 gallon kit (FX408KT1)

ColorGray

Mixing Ratio5A:1B



CSI Specification 03 01 20 Maintenance of Concrete Reinforcing



Ge

ner

al C

on

cret

e R

epa

ir

BONDING AGENTS

Where to Use• Bonding new concrete or repair

mortar to existing concrete• For warm‑weather applications • Where longer open times are required

Features• Bonds to both damp and dry concrete• Can be applied by brush,

roller, spray or squeegee• 60 minute pot life at 70°F (21°C)• 8 hour open time at 70°F (21°C)

for repair mortar installation

Application Rate• 60–100 ft.2/gal. (1.5–2.5 m2/L) depending

on substrate porosity and surface profile

Limitations• Do not apply to surfaces below 60°F (16°C)• Do not apply to surfaces above 110°F (43°C)• Repair mortars must be applied

while FX‑792LPL is still tacky• Material is a vapor barrier after cure,

contact Simpson Strong‑Tie for use in exterior on‑grade applications

• Existing concrete should be fully cured prior to application

FX‑792LPLLong Pot Life Epoxy Bonding Agent

FX‑792LPL Long Pot Life Epoxy Bonding Agent is a two‑component, 100% solids, moisture‑tolerant epoxy resin designed to increase the bond between freshly placed repair mortars or concrete mixes and existing concrete.

Specification ComplianceFX‑792LPL exceeds the performance requirements of ASTM C 881, Type II, Grade 2, Class C.

Packaging / SKU• 3 gallon kit

(FX792LPLKT3)• 15 gallon kit

(FX792LPLKT15)• 150 gallon kit

(FX792LPLKT150)

ColorAmber

Mixing Ratio2A:1B



CSI Specification 03 01 00 Maintenance of Concrete

Where to Use• Bonding new concrete or repair

mortars to existing concrete

• Features• Bonds to both damp and dry concrete• 25‑minute pot life at 75°F (24°C)• 3‑hour open time at 75°F (24°C)

for repair mortar installation • Can be applied by brush,

roller, spray or squeegee

Application Rate• 60–100 ft.2/gal. (1.5–2.5 m2/L) depending

on substrate profile and porosity

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 95°F (35°C)• Material is a vapor barrier after cure,

contact Simpson Strong‑Tie for use in exterior on‑grade applications

• Repair mortars and concrete mixes must be applied while FX‑752 is still tacky

• Existing concrete should be fully cured prior to application

FX‑752Epoxy Bonding Agent

FX‑752 All‑Purpose Epoxy Bonding Agent is a 100% solids, two‑component, moisture‑tolerant epoxy system designed to increase the bond between freshly placed repair mortars or concrete mixes and existing concrete.

Specification ComplianceFX‑752 exceeds the performance requirements of ASTM C 881, Type II, Grade 2, Class B.

Packaging / SKU• 1/2 gallon kit

(FX752KT2QT)• 2 gallon kit

(FX752KT2)• 10 gallon kit

(FX752KT10)

ColorGray

Mixing Ratio1A:1B






Ge

neral C

on

crete Re

pair

BONDING AGENTS

Where to Use• Bond new concrete or repair

mortar to existing concrete• Integral admixture for thinset

patching and stucco mixes

Features• Not a vapor barrier• Bonds to both damp and dry concrete• Improves adhesion of Portland

cement‑based products• Non‑emulsifying• Ready to use, simply stir and apply• Water based and non‑toxic• Can be applied by brush,

roller, spray or squeegee

Application Rate• Bonding Agent: 200–250 ft.2/gal.

(4.9–6.1 m2/L) depending on substrate profile and porosity

• Admixture: Approximately 4 gallons (15.1 L) per 94 lb. (42.6 kg) of Portland cement

Limitations• Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 95°F (35°C)• Repair mortars and concrete mixes must be

applied while FX‑Bondcrete is still tacky• FX‑Bondcrete may increase air content

when used as an admixture• Not compatible with solvent‑based

curing compounds as an admixture• Protect FX‑Bondcrete from freezing;

discard if freezing occurs

FX‑BondcreteLatex Bonding Agent and Admixture

FX‑Bondcrete Latex Bonding Agent and Admixture is a single‑component product designed to improve the bond between freshly placed repair mortars or concrete mixes and existing concrete. It also improves the bond of thin‑set patching, masonry mortars and stucco mixes as an integral admixture.

Specification ComplianceFX‑Bondcrete exceeds the performance requirements of ASTM C 1059, Type II.

Packaging / SKU• 1 gallon jug

(FXBONDCRETE‑1)• 5 gallon pail

(FXBONDCRETE‑5)• 50 gallon drum

(FXBONDCRETE‑50)

ColorMilky White

StorageStore dry between 40–95°F (4–35°C). Protect from freezing.





Ge

ner

al C

on

cret

e R

epa

ir

REPAIR MORTARS

Where to Use• Parking facilities, industrial plants,

walkways, bridges, tunnels, dams, balconies and elevated structures

• Horizontal concrete surfaces• Vertical and overhead concrete surfaces

as a form‑and‑pour material• Above, below and on‑grade applications• Free‑flowing repair mortar for

hard to reach areas• Leveling mortar

Features• Ready to use, simply add potable water• Pourable and pumpable• High early strength• High compressive, flexural,

and bond strengths• Excellent freeze/thaw resistance• Can be extended with up to 30 lb. (13.6 kg)

per bag with 3/8 in. (0.9 cm) coarse aggregate

Yield• 0.43 ft.3 (0.012 m3) per 50 lb.

(22.7 kg) bag (neat)• 0.62 ft.3 (0.018 m3) per 50 lb.

(22.7 kg) bag (extended)

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Minimum 1/2 in. (1.3 cm) application

thickness for vehicular traffic; 1/4 in. (0.6 cm) for foot traffic

• Maximum 3 in. (7.6 cm) application thickness neat

• Do not mix partial bags• Not compatible with solvent‑

based curing compounds• Avoid contact with aluminum surfaces

FX‑261Flowable Polymer Repair Mortar

FX‑261 Flowable Polymer Repair Mortar is a cementitious, high‑strength, single‑component, polymer‑modified, structural repair mortar enhanced with silica fume for pour and pump applications.

Packaging / SKU• 50 lb. bag

(FX261)

ColorDark gray


Shelf Life1 year in unopened packaging


Where to Use• Full or partial‑depth concrete repairs• On‑grade or below‑grade applications• Horizontal and formed vertical/

overhead applications• Tunnels, roads, balconies, parking

decks, elevated structures

Features• Pourable and pumpable• Normal set time• High bond strength• Excellent freeze/thaw resistance• Ready to use, just add potable water

Yield• 0.50 ft.3 (0.014 m3) per 60 lb. (27.2 kg) bag

Limitations• Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C)• Minimum 1 in. (2.5 cm) application thickness• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑32AECHigh‑Performance Air‑Entrained Concrete Mix

FX‑32AEC High‑Performance Air‑Entrained Concrete Mix is a single‑component concrete that incorporates a corrosion inhibitor, air entrainment and a high‑range water reducer for easy placement and workability.


(FX32AEC)• 3,000 lb. bulk bag

(FX32AEC‑B3000)

ColorGray


Shelf Life• 60 lb. bag: 1 year in

unopened packaging• 3,000 bulk bag:

6 months in unopened packaging




Ge

neral C

on

crete Re

pair

REPAIR MORTARS

Where to Use• Structural repair material for parking facilities,

industrial plants, walkways, bridges, tunnels, dams and elevated structures

• Vertical, horizontal and overhead repair• Above, below and on‑grade applications• Piers, sea walls and marine structures• Manholes, wet wells, water treatment

facilities, sewers and lift stations

Features• High‑early and ultimate strengths• Ideal for wet in‑service environments• Silica fume enhanced for low permeability• Minimal rebound in low‑pressure

spray applications• May be hand applied• Excellent freeze/thaw resistance• Available in bulk bags for jobsite efficiency• Ready to use, simply add potable water

Yield• 0.45 ft.3 (0.013 m3) per 55 lb. (24.9 kg)

Limitations• Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C)• Minimum 3/8 in. (0.9 cm) application thickness• Maximum vertical lift thickness of 2 in.

(5.1 cm); 1.5 in. (3.8 cm) overhead• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑262Sprayable Repair Mortar

FX‑262 Sprayable Repair Mortar is a cementitious, single‑component, shrinkage‑compensated, fiber‑reinforced, silica fume‑enhanced, structural repair mortar with integral corrosion inhibitor designed for low‑pressure spray and trowel applications.


(FX262)• 55 lb. pail

(FX262P)• 2,500 lb. bulk bag

(FX262‑B2500)

ColorDark gray



unopened packaging• 2,500 bulk bag: 6

months in unopened packaging


Where to Use• Partial‑depth concrete repairs• Above, below or on‑grade applications• Vertical and overhead applications• Tunnels, bridges, balconies, parking

decks, elevated structures, water treatment facilities and marine structures

Features• Ready to use, simply add potable water• Fiber‑reinforced• High early strength• Can be installed in lifts up to 3 in. (7.6 cm)

vertically and 1.5 in. (3.8 cm) overhead• Excellent freeze/thaw resistance• Abrasion resistant• Low permeability

Yield• 0.45 ft.3 (0.013 m3) per 50 lb.

(22.7 kg) bag or pail

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Not compatible with solvent‑

based curing compounds• Minimum 1/4 in. (0.6 cm) application thickness• Maximum 3 in. (7.6 cm)

application thickness per lift• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑263Rapid‑Hardening Vertical/Overhead Repair Mortar

FX‑263 Rapid‑Hardening Vertical/Overhead Repair Mortar is a cementitious, single‑component, fiber‑reinforced, polymer‑modified, silica fume‑enhanced, structural repair mortar with integral corrosion inhibitor designed for vertical and overhead applications. Available in regular and slow‑setting (FX‑263S) formulations.

Packaging / SKUStandard Formulation:• 50 lb. bag

(FX263)• 50 lb. pail

(FX263P)Slow‑Set Formulation:• 50 lb. bag

(FX263S)• 50 lb. pail

(FX263SP)

ColorDark gray






Ge

ner

al C

on

cret

e R

epa

ir

REPAIR MORTARS

Where to Use• Partial or full‑depth concrete repairs• Above, below and on‑grade applications• Vertical and overhead applications• Tunnels, parking decks, marine structures,

manholes, sewers, water treatment facilities• Ideal for large‑scale concrete repairs

Features• Ready to use• Pre‑mixed with sand• Can be wet or dry applied• Low rebound/less waste• Excellent finishing characteristics • Shrinkage compensated


Limitations• Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C)• Minimum 1/4 in. (0.6 cm) application thickness• Maximum 6 in. (15.2 cm) thickness per lift• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑288RTUReady to use Shotcrete Mortar

FX‑288RTU Ready to use Shotcrete Mortar is a cementitious, single‑component, micro silica‑enhanced, fiber‑reinforced, structural repair mortar with air entrainment designed for both wet and dry‑process shotcrete applications.


(FX288RTU)

ColorDark gray



CSI Specification 03 37 13 Shotcrete

Where to Use• Partial or full‑depth concrete repairs• Above, below and on‑grade applications• Vertical and overhead applications• Tunnels, parking decks, marine structures,

manholes, sewers, water treatment facilities• Ideal for large‑scale concrete repairs

Features• Economical concentrate• Can be wet or dry applied• Low rebound/less waste• Excellent finishing characteristics

reduce finish labor cost• Shrinkage compensated

Yield• 1.45 ft.3 (0.04 m3) per 52 lb. (23.6 kg)

when combined with 150 lb. (68 kg) of ASTM C 33 sand

Limitations• Do not apply to surfaces below 45°F (7°C) • Do not apply to surfaces above 90°F (32°C)• Minimum 1/4 in. (0.6 cm) application thickness• Maximum 6 in. (15.2 cm) thickness per lift• Sand must meet ASTM C 33 requirements• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑288Shotcrete Mortar Concentrate

FX‑288 Shotcrete Mortar is a cementitious, single‑component, micro silica‑enhanced, fiber‑reinforced, structural repair mortar concentrate with air entrainment designed for both wet‑ and dry‑process shotcrete applications. FX‑288 requires 150 lb. (68 kg) ASTM C 33‑compliant sand to be added per bag at the jobsite.


(FX288)

ColorDark gray



CSI Specification 03 37 13 Shotcrete



Ge

neral C

on

crete Re

pair

REPAIR MORTARS

Where to Use• Partial‑depth concrete repairs• Above, below and on‑grade applications• Vertical, horizontal and overhead applications• Corrosive environments• Manholes, sewers, and wastewater

treatment facilities

Features• Ready to use, simply add potable water• High early strength• Does not contain Portland cement• Excellent hydrogen sulfide resistance• Can be applied by hand or by low‑

pressure spray equipment

Yield• 0.5 ft.3 (0.014 m3) per 60 lb.

(27.2 kg) bag or pail

Limitations• Do not apply to surfaces below 32°F (0°C)• Do not apply to surfaces above 90°F (32°C)• Minimum 1/2 in. (1.3 cm) application thickness• Maximum 2 in. (5.1 cm)

application thickness per lift• Do not mix partial bags

FX‑293Calcium Aluminate Repair Mortar

FX‑293 Calcium Aluminate Repair Mortar is a single‑component, fiber‑reinforced patching mortar designed for hydrogen sulfide resistance in corrosive wastewater applications. Packaging / SKU

• 60 lb. bag (FX293)

• 60 lb. pail (FX293P)

ColorDark gray




Where to Use• Partial‑depth concrete repairs• On‑grade or below‑grade repairs• Horizontal and formed vertical/

overhead applications• Concrete paving repair, roads,

bridges, parking structures, runways, overlays, and bridge joint nosing

• In‑service refrigeration and freezer floors • Post‑tension closure pours

and keyway grouting

Features• Convenient pre‑measured system• Resistant to freeze/thaw cycles• Excellent resistance to sulfates,

de‑icing chemicals and acids• Rapid‑curing• Extendable up to 100% by weight

for deep patches/overlays• Cold weather patching as

low as ‑15°F (‑26°C)

Yield• 0.5 ft.3 (0.014 m3) per FX826KT1‑1 kit• 2.5 ft.3 (0.07 m3) per FX286KT5‑5 kit

Limitations• Do not apply to surfaces below ‑15°F (‑26°C)• Do not apply to surfaces above 90°F (32°C)• Minimum 1/4 in. (0.6 cm) application

thickness; maximum 2 in. (5.1 cm) neat• Installations over 2 in. (5.1 cm) thick

must be extended between 50‑100% with coarse, oven‑dried aggregate

• Maximum 6 in. (15.2 cm) thickness per lift• Apply only in well‑ventilated areas• Surfaces must be primed with FX‑826 Primer• Do not apply to damp or wet surfaces• Material is a vapor barrier after cure.

Concrete surface must not exhibit an active moisture vapor drive.

FX‑826Polymer Mortar

FX‑826 Polymer Mortar is a two‑component, flowable, rapid‑hardening, chemical‑resistant, methyl methacrylate (MMA) resin mortar designed for concrete repairs that require high early strength.

Packaging / SKU1 gallon kit (FX826KT1‑1) contains:• 1 gallon can of

Component “A” (FX826‑1A)

• (1) 60 lb. bag of Component “B” (FX826‑B)

5 gallon (FX286KT5‑5) contains:• 5 gallon pail of


• (5) 60 lb. bags of Component “B” (FX826‑B)

ColorDark tan


Shelf Life3 months




Ge

ner

al C

on

cret

e R

epa

ir

REPAIR MORTARS

Where to Use• Partial and full‑depth concrete repairs• On‑grade or below‑grade repairs• Horizontal and formed vertical applications• Bridges, roadways, runways, parking decks,

elevated structures, water treatment facilities, utilities, powerplants, industrial facilities

Features• Ready to use, simply add potable water• High early strength• Excellent workability and

finishing characteristics• Freeze/thaw resistant• Provides fast turnaround


Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Minimum application thickness

is 1 in. (2.5 cm)• Maximum installation depth is 6 in. (15.2 cm)• Do not mix partial bags• Avoid contact with aluminum surfaces

FX‑928Fast‑Setting Concrete Mix

FX‑928 Fast Setting Concrete Mix is a single‑component, rapid‑hardening concrete mix with integral corrosion inhibitor designed for horizontal and formed vertical repairs where a quick turnaround with minimal downtime is required.


(FX928CON)• 3,000 lb. bulk bag

(FX928CON‑B3000)

ColorGray



unopened packaging• 3,000 lb. bulk bag:

6 months in unopened packaging


Where to Use• Active leaking conditions such as bell

and spigot joints or storm drains • Honeycomb patching in concrete• Used with injection products

as a fast‑setting plug

Features• Ready to use, simply add potable water• Fast‑setting repair mortar• May be placed in actively leaking conditions• Forms watertight seal to concrete

and masonry base materials


Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Avoid contact with aluminum surfaces

FX‑922Fast‑Setting Hydraulic Cement Mortar

FX‑922 Fast‑Setting Hydraulic Cement Mortar is a rapid‑hardening mortar designed for stopping active leaks in concrete and general patching of concrete and masonry. Packaging / SKU

• 50 lb. pail (FX922)

ColorGray






Ge

neral C

on

crete Re

pair

REPAIR EPOXY

Where to Use• Joint repairs• Mortar when combined with FX‑701 Graded

Silica Filler for heavy‑traffic floor repairs• For vertical and overhead concrete patching• Vertical, horizontal and

overhead crack sealing• Securing ports and paste over for

pressure injection applications• As a jacket joint sealer and top‑bevel

material for the FX‑70® Structural Repair and Protection System

Features• Bonds well to most construction materials• Bonds to dry or damp surfaces• Easily applied with trowel or putty knife• Can be feather edged

Yield• 231 in.3/gal. (0.001 m3/L) neat• 350 in.3/gal. (0.0015 m3/L) when

mixed 1 part by volume with FX‑701 Oven‑Dried Graded Silica Filler

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• 1 in. (2.5 cm) maximum lift thickness

for vertical and overhead repairs• Material is a vapor barrier after cure.

Concrete surface must not exhibit an active moisture vapor drive.

• Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings

• Product may discolor if exposed to direct sunlight

• Not recommended for large exterior repairs or applications subject to large thermal change

• Not for use as a structural anchoring adhesive• Do not exceed one part by volume FX‑701

Graded Silica Filler for mortar mixes

Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives.

FX‑763Low‑Modulus Trowel‑Grade Epoxy

FX‑763 Low‑Modulus Trowel‑Grade Epoxy is a two‑component, 100% solids, moisture‑tolerant, non‑sag epoxy designed for vertical, horizontal, and overhead applications and uses.

Specification ComplianceFX‑763 exceeds the performance requirements of ASTM C 881, Type I, Grade 3, Class B.



(FX763KT15)

ColorMixed Epoxy: Gray

Mixing Ratio2A:1B






Ge

ner

al C

on

cret

e R

epa

ir

ADMIXTURES

Where to Use• Admixture in concrete mixes where increased

slump and workability are desired• Admixture in grout mixes where increased

fluidity and minimized shrinkage are desired

Features• Improves flowability and workability • Increases initial set time• Contains no calcium chloride, salt,

sugar or foaming agents

Application Rate• 1/2 to 1 lb. (0.23 to 0.45 kg) of powder

or 16‑32 fl. oz. (0.45‑0.9 L) per 100 lb. (45.4 kg) of cement

Limitations• Protect FX‑32CA Liquid from freezing;

discard if freezing occurs• Do not exceed recommended dosage rates

FX‑32CAHigh‑Range Water Reducer

FX‑32CA Catalytic Agent is a high‑range water‑reducing admixture for Portland cement‑based grouts, mortars and concrete mixes. FX‑32CA allows up to 25% reduction in mix water while maintaining excellent workability and increased set time. Available as a powder or liquid.

Specification ComplianceFX‑32CA exceeds the performance requirements of ASTM C 494 Type F.

Packaging / SKUPowder:• 30 lb. pail

(FX32CAP‑30P)• 300 lb. drum

(FX32CAP‑300D)Liquid:• 1 gallon pail

(FX32CAL‑1)• 5 gallon pail

(FX32CAL‑5)• 55 gallon drum

(FX32CAL‑55)

StorageStore dry between 40–95°F (4–35°C). Protect liquid from freezing.


CSI Specification 03 30 00 Cast‑in‑Place Concrete

Where to Use• As a concrete or grout admixture where

increased strength, abrasion resistance and reduced permeability are desired

• Where low‑permeability concrete is required• Marine applications, bridge decks,

parking decks, grouting• For overlay applications

Features• Increases compressive and flexural strength• Reduces permeability• Increases abrasion resistance

Application Rate• 1.5–2.5 gallons (5.7–9.5 L) per 100 lbs.

(45.4 kg) of cement

Limitations• The use of an air‑entraining agent is highly

recommended in areas where freeze/thaw conditions may be experienced

• For best results, add FX‑32SFA on‑site. In‑transit conditions may adversely affect the performance of FX‑32SFA.

• Protect FX‑32SFA from freezing. Discard if freezing occurs

• Do not exceed recommended dosage rates

FX‑32SFAMicro Silica Fume Admixture

FX‑32SFA Micro Silica Fume Admixture is a high‑performance concrete and grout admixture designed to increase compressive and flexural strength, improve abrasion resistance and reduce permeability in concrete and grout mixes.

Specification ComplianceFX‑32SFA exceeds the performance requirements of ASTM C 1240.

Packaging / SKU• 1 gallon pail

(FX32SFLIQUID‑1)• 5 gallon pail

(FX32SFLIQUID‑5)

StorageStore dry between 40–95°F (4–35°C). Protect from freezing


CSI Specification 03 30 00 Cast‑in‑Place Concrete


RepairCrack

EPOXY – LOW‑VISCOSITY

Where to Use• Pressure injection of static

cracks up to 1/4 in. (6.4 mm)• For underwater pressure‑

injection applications• As a binder for cold‑weather anchor

and base plate grouting

Features• Structural formulation• Applications as low as 30° (‑1°C)• Low‑viscosity over a wide temperature range• Can be used with metered

pressure‑injection equipment

Yield• 231 in.3/gal. (0.001 m3/L) neat• 300–600 in.3/gal. (0.0013–0.0026 m3/L)

when mixed 1‑3 parts by volume with FX‑701 Oven‑Dried Graded Silica Filler

Limitations• Do not apply to surfaces below 30°F (1°C)• Do not apply to surfaces above 80°F (27°C)• Material is a vapor barrier after cure. When

used as a grout, concrete surface must not exhibit an active moisture vapor drive.

• For use in non‑moving cracks only

Limitations (cont’d)• Not for use in actively leaking or seeping

cracks. Remove active hydrostatic pressure before attempting injection.

• For cracks wider than ¼ in. (0.6 cm), consult a qualified engineer


• Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair mortar

• When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm)

• Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking.

• When used as a binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture


FX‑741LVLow‑Viscosity Cold‑Weather Structural Epoxy

FX‑741LV Low‑Viscosity Cold‑Weather Structural Epoxy is a fast‑setting, two‑component, 100% solids, moisture‑tolerant structural epoxy designed for pressure injection of cracks and as a grout binder in low‑temperature applications.

Specification ComplianceFX‑741LV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class A and B.

Packaging / SKU• 15 oz. side‑by‑

side dual cartridge (FX741LVCTG)

• 3 gallon kit (FX741LVKT3)



ColorMixed Epoxy: Straw

Mixing Ratio2A:1B

Mixed Viscosity• 1,800 cps at 40°F (4°C)• 500 cps at 70°F (21°C)







Cra

ck R

epa

ir


cracks up to 1/4 in. (0.6 cm)• Underwater pressure injection• As a binder for anchor and

base plate grouting

Features• Structural formulation• Low viscosity• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• Can be used with metered




Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Material is a vapor barrier after cure. When

used as a grout, concrete surface must not exhibit an active moisture vapor drive.

• For use in non‑moving cracks only• Not for use in actively leaking or seeping





• Not recommended for use as a mortar for repairs subject to large thermal change


• Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking



FX‑751LVLow‑Viscosity Structural Injection Epoxy

FX‑751LV Low‑Viscosity Structural Injection Epoxy is a two‑component, 100% solids, moisture‑tolerant, structural epoxy designed for pressure injection of concrete cracks.

Specification ComplianceFX‑751LV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class B.

Packaging / SKU• 15 oz. side‑by‑side

dual cartridge (FX751LVCTG)




ColorMixed Epoxy: Light Straw

Mixing Ratio2A:1B

Mixed Viscosity800 cps at 72°F (22°C)







Crack R

epair


cracks up to 1/4 in. (0.6 cm)• Underwater pressure injection• Gravity‑feed flood‑coat crack

filling on horizontal decks• As a binder for anchor and

base plate grouting

Features• Structural formulation• Super‑low viscosity• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• Penetrates hairline cracks as

small as 0.002 in. (0.05 mm)• Can be applied by squeegee or

roller for flood‑coat applications• Can be used with metered

pressure injection equipment

Application Rate/Yield• 231 in.3/gal. (0.001 m3/L) neat• 300–600 in.3/gal. (0.0013–0.0026 m3/L)


• For flood‑coat applications: 150–200 ft.2/gal. (3.6–4.9 m2/L) depending on surface profile and porosity

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Material is a vapor barrier after cure.

When used as a grout or coating, concrete surface must not exhibit an active moisture vapor drive.

• Not for use on exterior slab on‑grade coating applications

• For use in non‑moving cracks only• Product may discolor if exposed

to direct sunlight • Not for use in actively leaking or seeping








FX‑770SLVSuper Low Viscosity Structural Epoxy

FX‑770SLV Super Low Viscosity Structural Epoxy is a two‑component, 100% solids, moisture‑tolerant epoxy designed for pressure injection of concrete cracks, gravity‑feed flood‑coat crack filling applications and grout binder.

Specification ComplianceFX‑770SLV exceeds the performance requirements of ASTM C 881, Type I and IV, Grade 1, Class B.

Packaging / SKU• 15 fl. oz. side‑by‑side

dual cartridge (FX770SLVCTG)

• 3 gallon kit (FX770SLVKT3)



ColorMixed Epoxy: Light Amber

Mixing Ratio2A:1B







Cra

ck R

epa

ir



cracks up to 1/4 in. (0.6 cm)• Underwater pressure‑injection• Gravity‑feed flood‑coat crack

filling on horizontal decks• As a binder for anchor and

base plate grouting

Features• Low viscosity• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• High‑strength formulation• Can be applied by squeegee or

roller for flood‑coat applications• Can be used with metered









• For use in non‑moving cracks only• Not for use in actively leaking or seeping




• When used as a base plate grout or repair mortar, minimum application thickness is 1/2 in. (1.3 cm). Maximum installation depth is 3 in. (7.6 cm).




FX‑771LVLow‑Viscosity High‑Modulus Epoxy

FX‑771LV Low‑Viscosity High‑Modulus Epoxy is a two‑component, 100% solids, moisture‑tolerant epoxy designed for gravity‑feed flood‑coat or pressure injection of concrete cracks and a grout binder.

Specification ComplianceFX‑771LV exceeds the performance requirements of ASTM C 881, Type I, Grade 1, Class B.

Packaging / SKU• 15 fl. oz. side‑by‑side

dual cartridge (FX771LVCTG)





Mixing Ratio2A:1B







Crack R

epair


Where to Use• Pressure injection of static cracks

up to 1/4 in. (0.6 cm) (0.6 cm)• Gravity‑feed flood‑coat crack

filling on horizontal decks• For underwater pressure‑injection• As a binder for anchor and

base plate grouting

Features• Low viscosity• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• Extended working time permits deep

penetration of cracks and porous surfaces• High‑strength formulation• Can be applied by squeegee, broom or roller

for gravity‑feed flood‑coat applications• Can be used with metered

pressure injection equipment







• For use in non‑moving static cracks only• Not for use in actively leaking or seeping


• For cracks wider than 1/4 in. (0.6 cm), consult a qualified engineer





• Epoxy grouts can crack due to thermal stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking.


FX‑791LVLPLLow‑Viscosity Long Pot Life Epoxy

FX‑791LVLPL Low‑Viscosity Long Pot Life Epoxy is a two‑component, 100% solids, moisture‑tolerant, long pot life epoxy designed for pressure injection of concrete cracks, gravity‑feed flood‑coat crack filling applications, and as a grout binder for warm weather applications.

Specification ComplianceFX‑791LVLPL exceeds the performance requirements of ASTM C 881, Type I, Grade 1, Class C.


(FX791LVLPLKT3)• 15 gallon kit

(FX791LVLPLKT15)• 150 gallon kit

(FX791LVLPLKT150)


Mixing Ratio2A:1B







Cra

ck R

epa

ir

EPOXY – GEL

Where to Use• Threaded rod, rebar, dowel and pin anchoring• Securing ports and paste over for

pressure‑injection applications• Vertical and horizontal crack sealing• Pressure injection in cracks

over 1/8 in. (0.3 cm)• Pick‑proof sealant

Features• Gel viscosity• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• Can be feather edged• Excellent chemical resistance to petroleum

products and wastewater exposure• Excellent resistance to freeze/thaw cycles

Yield• 231 in.3/gal. (0.001 m3/L) neat• 36 in.3 (0.0006 m3) per cartridge

Limitations• Do not apply to surfaces below 40°F (4°C) • Do not apply to surfaces above 90°F (32°C)• For use in non‑moving cracks only• Not for use in actively leaking or seeping





FX‑715Epoxy Gel

FX‑715 Epoxy Gel is a gel‑viscosity, two‑component, high‑solids, moisture‑tolerant, thixotropic epoxy designed for pressure injection of concrete cracks. FX‑715 is suitable for vertical and horizontal crack sealing, securing injection ports, anchoring, doweling, and general concrete repair applications.

Specification ComplianceFX‑715 exceeds the performance requirements of ASTM C 881 Type I, Grade 3, Class B.


dual cartridge (FX715CTG)

• 2 gallon kit (FX715KT2)



ColorMixed: Gray

Mixing Ratio1A:1B






Crack R

epair

METHYL METHACRYLATE

Where to Use• Concrete sealer• Gravity‑feed flood‑coat crack sealing• Exterior and unoccupied interior applications• Bridge decks, roads, floors,

parking structures, in‑service refrigeration and freezer flooring

Features• Fast‑curing• Warm and cold weather

formulations available• Application temperature as low as

40°F (4°C) for standard formulation, ‑20°F (‑29°C) for winter formulation

• Super‑low viscosity• Can be applied by spray,

squeegee, broom or roller• UV‑resistant when cured

Application Rate• For flood‑coat applications:

100 ft.2/gal. (2.5 m2/L), depending on surface profile and porosity

Limitations• Minimum installation temperature is

40°F (4°C) for standard formulation, ‑20°F (‑29°C) for winter formulation

• Maximum installation temperature is 100°F (37°C) for standard formulation and 80°F (26°C) for winter “W” formulation

• Surface must be completely dry prior to application

• Apply only in well‑ventilated areas• For horizontal use only • For use in non‑moving cracks only• When used neat, maximum crack

width is 1/8 in. (0.3 cm). Extended with FX‑701 Oven‑Dried Graded Silica Filler, maximum crack width is 1/4 in. (0.6 cm).

• Material is a vapor barrier after cure. Concrete surface to receive coating must not exhibit an active moisture vapor drive.

• FX‑821MMA is designed to penetrate, but will leave a slight gloss finish that will wear over time

FX‑821MMASuper Low Viscosity Methyl Methacrylate Resin

FX‑821MMA Super Low Viscosity Methyl Methacrylate Resin is a two‑component, fast‑curing, methyl methacrylate (MMA) resin designed for densifying porous concrete and for gravity‑feed flood‑coat treatment of concrete cracks as small as 0.002 in. (0.05 mm). FX‑821MMA is available in both standard and fast‑setting winter “W” versions for cold weather applications.

Packaging / SKUStandard Formulation• 1 gallon kit

(FX821MMAKT1)• 5 gallon kit

(FX821MMAKT5)• 50 gallon kit

(FX821MMAKT50)Winter Formulation• 1 gallon kit

(FX821WMMAKT1)• 5 gallon kit

(FX821WMMAKT5)• 50 gallon kit

(FX821WMMAKT50)

ColorClear

Mixing RatioPre‑proportioned kit. Use entire contents of all components.

Viscosity6 cps at 75°F (24°C)


Shelf Life6 months in unopened packaging

CSI Specification 07 18 00 Concrete Rehabilitation



Cra

ck R

epa

ir

ETI CARTRIDGE SOLUTIONS

ETI‑SLV Super‑Low Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from hairline to 1⁄4 in. (6 mm) in width. At 350 cps (mixed), ETI‑SLV may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports. ETI‑SLV cures to a uniform black color, is packaged in 16 oz. (475 mL) side‑by‑side dual cartridges that includes an Opti‑Mix static mixing nozzle and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 1, Class B.

Uses: Structural repair of cracked concrete, waterproof sealant, suitable for dry or damp (non‑flowing) repairs.

ETI‑SLV Super‑Low Viscosity Injection Epoxy

ETI‑LV22 Low‑Viscosity Injection Epoxy

ETI‑LV Low‑Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from 1⁄64 in. (0.4 mm) to 1⁄4 in. (6 mm) in width. ETI‑LV has a mixed viscosity of 1,750 cps, may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports, and is suitable for use in potable water applications. ETI‑LV cures to a uniform amber color, is packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that includes an Opti‑Mix static mixing nozzle, and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 1, Classes B & C; NSF/ANSI Standard 61 (22 in.2 ⁄ 1000 gal.).


ETI‑GV Gel‑Viscosity Injection Epoxy is a two‑component, high‑solids epoxy formulated for structural repair of cracks in concrete ranging from 3⁄32 in. (2.4 mm) to ¼ in. (6 mm) in width. ETI‑LV has a gel viscosity that reduces under pressure for increased flowability, and may be gravity‑fed or pressure injected with E‑Z‑Click™ injection ports. ETI‑GV cures to a uniform grey color, is packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include an Opti‑Mix static mixing nozzle, and exceeds the performance requirements of ASTM C 881 Type I and IV, Grade 3, Classes B & C.


ETI‑GV22 Gel‑Viscosity Injection Epoxy

CIP is a fast‑curing, two‑part epoxy paste‑over material. It is used to seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP sets up rigid and can either be left on the concrete or ground or chiseled off at the completion of a crack injection job. Packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include a static mixing nozzle.

CIP Paste Over

CIP‑F is a flexible, peelable and fast‑curing polyurea paste‑over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP‑F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste‑over. Packaged in 22 oz. (650 mL) side‑by‑side dual cartridges that include a static mixing nozzle.

CIP‑F Peelable Paste Over

PASTE‑OVER ADHESIVES



Crack R

epair

ETI ACCESSORIES

The Opti‑Mix® static mixing nozzle is specifically designed for crack injection epoxies and ensures thorough mixing of epoxy components. For use with both low‑viscosity and gel‑viscosity ETI formulations. Flow regulators ensure that resin and hardener flow at equal rates and prevent mixed epoxy from flowing back out of the nozzle into the cartridge. This ensures thorough mixing and prevents mixed product from curing in the neck of the cartridge, causing blockage.

EMNO22 Opti‑Mix® Mixing Nozzle

E‑Z‑Click™ Injection System

The E‑Z‑Click injection system is comprised of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E‑Z‑Click injection fitting installs onto the end of the Opti‑Mix mixing nozzle and clicks onto the E‑Z‑Click™ ports during injection. Maximum installation pressure of 150 psi.• Positive connection eliminates messy leakage, minimizing

waste and clean‑up • No drilling of ports: E‑Z‑Click ports perform while pasted to the surface

of the concrete. No drilling required for most applications • Disconnect the fitting from the E‑Z‑Click part and the epoxy stops

flowing, no leaky mess • After injecting, pull the head of the E‑Z‑Click port out to close it

and prevent leakage • One person can work faster without having to hold the tube on the port

EDT22SManual Dispensing Tool for 1:1 and 2:1 Adhesive Cartridges

The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high‑volume, continuous use. The tool can be easily converted from dispensing a 20 or 22 oz. (570 or 650 mL) 1:1 ratio cartridge to a 16 oz. (475 mL) 2:1 ratio cartridge.

EDTA22PPneumatic Dispensing Tool for 20 and 22 oz. Adhesive Cartridges

The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time‑saving ground‑level doweling. The heavy‑duty tool comes with a custom, blow‑molded plastic carrying case.


InjectionNon‑Structural

Where to Use• Sealing water leaks above and below‑grade• Pressure‑injection water stopping• Foundations, tunnels, manholes, tanks,

sewer pipe joints, dams, mines, reservoirs

Features• Expands up to 7 times original

volume unrestricted• Non flammable• Can be injected by manual pumps or

high‑pressure injection equipment• Gel time can be accelerated with

the addition of FX‑Accelerator

• Non corrosive

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Product will discolor if exposed

to direct sunlight• Resistance to in‑service chemical

exposure must be confirmed for compatibility prior to application

• FX‑3 JETSET is extremely sensitive to moisture. Keep containers tightly closed to prevent moisture from coming into contact with the material as very small amounts can begin the reaction process.

• JETSET products are packed under a nitrogen blanket to prevent contact with atmospheric moisture. Once the original packaging has been opened, shelf life can be expected to be significantly reduced. Do not open containers until ready to use and close immediately to protect remaining contents.

• Do not exceed 10% by volume addition of FX‑Accelerator

FX‑3 JETSETHydrophilic Polyurethane Injection Grout

FX‑3 JETSET is a low‑viscosity, single‑component, moisture‑activated, TDI‑hydrophilic, expanding polyurethane grout designed to stop and prevent water leaks. FX‑3 JETSET reacts with water and expands to form flexible closed‑cell waterproof foam that prevents water infiltration through cracks in concrete.

Packaging / SKU• 20 fl. oz. side‑by‑

side dual cartridge (FX3JETSET‑CTG)

• 1 quart can (FX3JETSET‑QT)

• 1 gallon can (FX3JETSET‑1)

• 5 gallon pail (FX3JETSET‑5)

• 50 gallon drum (FX3JETSET‑50)

ColorLight yellow

Viscosity750 +/‑ 250 cps at 75°F (24°C)



CSI Specification 03 64 00 Injection Grouting



Non‑S

tructural Injection

NON‑STRUCTURAL INJECTION

Where to Use• Sealing water leaks above and below‑grade• Pressure‑injection water stopping• Foundations, tunnels, manholes, tanks,

sewer pipe joints, dams, mines, reservoirs

Features• Expands up to 5 times original

volume unrestricted• Non flammable• Variable gel times with the

addition of FX‑Accelerator• Can be injected by manual pumps or

high‑pressure injection equipment

• Very low shrinkage in cured state

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Product will discolor if exposed





• Proper use of FX‑5 JETSET requires a minimum of 1% by volume addition of FX‑Accelerator to properly react. Do not exceed 10% by volume.

FX‑5 JETSETHydrophobic Polyurethane Injection Grout

FX‑5 JETSET is a low‑viscosity, two‑component, MDI‑hydrophobic, expanding polyurethane grout designed to stop and prevent water leaks. FX‑5 JETSET reacts in the presence of water and expands to form a flexible closed‑cell waterproof foam that prevents water infiltration.

Packaging / SKU5 gallon kit (FX5JETSETKT5.25) contains: • 5 gallon pail

(FX5JETSET‑5)• 1 quart can of

FX‑JETSET Accelerator (FXJETACC‑QT)

ColorLight Yellow

Viscosity1,050 +/‑ 200 cps at 75°F (24°C)






Non

‑Str

uctu

ral I

njec

tion

NON‑STRUCTURAL INJECTION

Where to Use• Sealing water leaks above and below‑grade• Pressure‑injection water stopping• Foundations, tunnels, manholes,

tanks, sewer pipe joints, mines

Features• Non‑expanding flexible gel• Variable set times with the

addition of FX‑Accelerator• Non flammable• Suitable for use in wet or

submerged environments• Can be injected by manual pumps or

high‑pressure injection equipment• Super‑low viscosity material for

maximum penetration• Very‑low shrinkage when dry• For use in both static and dynamic cracks

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Product may discolor if exposed





• Do not exceed 10% by volume addition of FX‑Accelerator

FX‑30 JETSETSuper Low Viscosity Hydrophobic Polyurethane Injection Gel

FX‑30 JETSET is a super low viscosity, single‑component, MDI‑hydrophobic, non‑expansive polyurethane gel designed to stop and prevent water leaks. FX‑30 JETSET reacts with water to form a permanently flexible closed‑cell waterproof gel that prevents water infiltration.

Packaging / SKU• 1 gallon can

(FX30JETSET‑1)• 5 gallon pail

(FX30JETSET‑5)

ColorLight yellow

Mixed Viscosity 15 cps at 75°F (24°C)





SealingJoint

PRIMERS

Where to Use• To increase adhesion between

substrate and sealant• Joint sealant applications

subject to immersion• Recommended with FX‑570/571/572/573

Features• Ready to use• For use with concrete, masonry, and wood• Can be applied by brush, roller or spray• Up to 8‑hour open time at 72°F (22°C)

Application Rate• 300 ft.2/gal. (7.4 m2/L), depending

on surface profile and porosity

Limitations• Do not apply to surfaces below 40°F

(4°C) or if temperatures are expect to fall below minimum temperature for 4 hours following application

• Do not apply to surfaces above 100°F (38°C)• Sealant must be installed within 8 hours of

primer application. Re‑apply if exceeded

FX‑57XSealant Primer

FX‑57X Sealant Primer is a single‑component, fast drying, moisture‑curing primer designed to increase the bond between the substrate and polysulfide sealants. Packaging / SKU

• 1 quart can (FX57XPRIMER‑QT)

• 1 gallon can (FX57XPRIMER‑1)

ColorClear



CSI Specification 07 92 00 Joint Sealants



Join

t Sea

ling

FLEXIBLE SEALANTS

Where to Use• Expansion joints in concrete and masonry• Window and door frames• Pipe penetrations, flashings,

roofing applications

Features• Paintable• UV resistant• Bond to most common construction

materials without a primer• For vertical and horizontal applications• Suitable for above and

below‑grade applications• Remains flexible after cure• +/‑ 25% movement capability• Non staining

Yield• 36 in.3 (0.0006 m3) per sausage• 24 lin. ft. (7.3 m) per sausage using ¼ in.

deep x ½ in. wide (0.6 cm x 1.3 cm) joint size

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 100°F (38°C)• Minimum 1/4 in. (6 mm) installation depth• Maximum 1/2 in. (12.7 mm) installation depth• Surface to receive sealant

must be completely dry• An active vapor drive can cause

sealant to gas and bubble• Adhesion and product compatibility

testing must be performed prior to over‑coating FX‑516 to verify compatibility

• Do not wet tool with solvent or soapy water• Horizontal joints subject to traffic

should be 1/2 in. (12.7 mm) thick • Not recommended for immersion

service applications• Dynamic joints require the use of

backer rod or bond‑breaker tape

FX‑516Elastomeric Sealant

FX‑516 Elastomeric Sealant is a single‑component, non‑sag, moisture‑cured, elastomeric joint sealant designed for 25% movement in dynamic construction joints. FX‑516 bonds well to most common construction materials to provide a watertight seal.

Specification ComplianceFX‑516 exceeds the performance requirements of ASTM C 920 Type S, NS, Class 25; TT‑S‑00230C; USDA Approved.

Packaging / SKU• 20 oz. sausage pack

(FX516GRAY‑20S)

ColorAvailable in gray, other colors available by special order.






Joint S

ealing

Where to Use• Expansion joints in concrete and masonry• Precast panels, parking decks,

water treatment facilities• Secondary containment with

limited chemical exposure• Immersion in‑service environments

Features• Bond to most common construction

materials without a primer• In‑service temperature range of

‑40 to 250°F (‑40 to 121°C)• +/‑25% movement capacity• Excellent chemical resistance• Long in‑service lifecycle• UV resistant

Yield• 346 in.3 (0.0057 m3) per kit• 230 lin. ft. (70 m) per kit using ¼ in. deep

x ½ in. wide (0.6 cm x 1.3 cm) joint size

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 95°F (35°C)• Surface to receive sealant


sealant to gas and bubble• Do not wet tool with solvent or soapy water• FX‑57X primer is recommended for all

installations subject to immersion• Allow FX‑570/571 to cure for a minimum of 7

days prior to placing into immersion service

• Adhesion testing is required for all painted or coated substrates to verify adhesion properties prior to use

• Horizontal joints subject to traffic should be a minimum of 1/2 in. (1.3 cm) thick

• Minimum joint width is 1/4 in. (0.6 cm)• Dynamic joints require the use of


FX‑570/571Polysulfide Joint Sealants

FX‑570/571 Polysulfide Joint Sealants are two‑component, chemically‑cured, elastomeric joint sealants designed to provide a watertight seal in dynamic construction joints. Available in non‑sag (FX‑570) and self‑leveling (FX‑571) versions, FX‑570/571 bond well to most common construction materials, have excellent UV and chemical resistance and long expected service life.

Specification ComplianceFX‑570/571 exceeds the performance requirements of ASTM C 920, Class 25, Grade NS (FX‑570), Grade P (FX‑571); GSA TT‑S‑0227E.

Packaging / SKU• 1.5 gallon kit

(FX570KT1.5)• 1.5 gallon kit

(FX571KT1.5)

ColorMixed: Dark gray





FLEXIBLE SEALANTS



Join

t Sea

ling

Where to Use• Expansion joints in concrete and masonry• Precast panels, parking decks,

water treatment facilities• Secondary containment with

limited chemical exposure• Immersion in‑service environments

Features• Bond to most common construction

materials without a primer• In‑service temperature range of

‑40 to 250°F (‑40 to 121°C)• Excellent chemical resistance• Long in‑service lifecycle• UV resistant

Yield• 346 in.3 (0.0057 m3) per kit• 230 lin. ft. (70 m) per kit using ¼ in. deep

x ½ in. wide (0.6 cm x 1.3 cm) joint size

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 95°F (35°C)• Surface to receive sealant


sealant to gas and bubble• Do not wet tool with solvent or soapy water• FX‑57X primer is recommended for all

installations subject to immersion• Allow FX‑572/573 to cure for a minimum of 7

days prior to placing into immersion service• Adhesion testing is required for all

painted or coated substrates to verify adhesion properties prior to use

• Horizontal joints subject to traffic should be a minimum of 1/2 in. (1.3 cm) thick

• Minimum joint width is 1/4 in. (0.6 cm)• Dynamic joints require the use of


FX‑572/573Bioactivity‑Resistant Polysulfide Joint Sealants

FX‑572/573 Bioactivity‑Resistant Polysulfide Joint Sealants are two‑component, chemically‑cured, elastomeric joint sealants designed to provide a watertight seal in dynamic construction joints with increased resistance to bioactivity encountered in wastewater treatment plants. Available in self‑leveling (FX‑572) and non‑sag (FX‑573) versions, FX‑572/573 bond well to most common construction materials, and have excellent UV and chemical resistance properties to extend their expected in‑service lifecycle.

Specification ComplianceFX‑572/573 exceeds the performance requirements of ASTM C 920, Type M, Class 25, Grade NS (FX‑573), Grade P (FX‑572), Use NT, T, M; GSA TT‑S‑0227E Type 1 (FX‑572), Type 2 (FX‑573), Class A.

Packaging / SKU• 1.5 gallon kit

(FX572KT1.5)• 1.5 gallon kit

(FX573KT1.5)

ColorMixed: Dark gray





FLEXIBLE SEALANTS



Joint S

ealing

SEMI‑RIGID SEALANTS

Where to Use• Warehouses and distribution centers• Industrial and commercial concrete floors• As a rapid‑curing joint filler for non‑moving

horizontal joints in concrete

Features• Return to full traffic in 1 hour at 70°F (21°C)• Low odor• Self leveling• Excellent chemical and abrasion resistance• Easy to use dual cartridges with

static mixing nozzles available• Bulk systems must be installed with

metered plural‑dispensing equipment• In‑service temperature range

‑45 to 200°F (‑42‑93°C)• Protects joint edges from edge

spalling under load

Yield• 231 in.3/gal. (0.001 m3/L) neat• 36 in.3 (0.0006 m3) per cartridge• 8 lin. ft. (2.4 m) per cartridge at 1 ½ in.

deep x ¼ in. wide (3.8 cm x 0.6 cm)• 51 lin. ft. per gallon (4.1 m/L) at 1 ½ in.

deep x ¼ in. wide (3.8 cm x 0.6 cm)

Limitations• Do not apply to surfaces below 35°F (2°C)• Do not apply to surfaces above 95°F (35°C)• Not for use in dynamic joints• Requires specialty mixing and placing

equipment for bulk applications• Must be dispensed through

a static mixing system• Surface to receive sealant

must be completely dry• Adhesion and product compatibility testing

must be performed prior to over‑coating FX‑562 to verify compatibility

• For interior use only• For horizontal use only • Floor must be level

FX‑562Rapid‑Curing Polyurea Joint Filler

FX‑562 Rapid‑Curing Polyurea Joint Filler is a 100% solids, two‑component, self‑leveling, fast‑curing, semi‑rigid polyurea joint filler designed to fill control joints in commercial and industrial concrete floors subject to heavy forklift traffic and joint edge spalling.


dual cartridge (FX562CTG)



ColorMixed: Light gray

Mixing Ratio1A:1B

StorageStore dry between 40–80°F (4–27°C).




CoatingPerformance

CEMENTITIOUS COATINGS

Where to Use• Horizontal and vertical surfaces• Above‑grade, on‑grade and

below‑grade applications• Waterproofing and damp‑proofing

concrete and masonry• Interior and exterior applications• To protect concrete and masonry

from freeze/thaw cycles• To even out surface color variations

on newly repaired concrete

Features• Trowel or slurry consistency• Convenient pre‑measured kit• Excellent bond strength• Can be applied by brush,

roller, spray, or trowel• Not a vapor barrier when used

for damp‑proofing

Application RateDamp‑proofing: 20 WFT mils total applied in one coat, 80 ft.2/gal. (2 m2/L) depending on surface profile and porosityWaterproofing: 40 WFT mils total applied in two coats, 80 ft.2/gal. (2 m2/L) per coat depending on surface profile and porosity


(7°C) or if temperatures are expected to fall below minimum temperature for 24 hours following application

• Do not apply to surfaces above 90°F (32°C) • Protect liquid component from

freezing; discard if freezing occurs• Protect coating from rain and

freezing temperatures for 24 hours following installation


• Do not apply at application rates less than 40 ft.2/gal. (1 m2/L)

• Service conditions for horizontal applications should be limited to foot traffic

• Allow a minimum of 24 hours at 75°F (24°C) air‑curing before exposing installed FX‑207 to submerged conditions. Lower temperatures will extend required air‑curing time

• Avoid contact with aluminum surfaces

FX‑207Slurry Seal

FX‑207 Slurry Seal is a two‑component, polymer‑modified cementitious coating designed for waterproofing and damp‑proofing concrete and masonry substrates. Packaging / SKU

3.3 gallon kit (FX207KT1‑1) contains: • 1 gallon jug of


• 40 lb. bag of Component “B” (FX207B)

ColorGray




CSI Specification 07 16 00 Cementitous Waterproofing



CEMENTITIOUS COATINGS

Perform

ance C

oating

Where to Use• DOT Applications: Bridges, pilings,

parapets, retaining walls• Commercial: pre‑cast and tilt‑up wall

panels, CMU block, foundations, stucco, parking structures

• As a protective and decorative coating for concrete and masonry

• Waterproofing and damp‑proofing concrete and masonry

• Freeze/thaw and de‑icing salt protection• For vertical and overhead applications• Interior and exterior applications• Above and below‑grade applications

Features• Fine texture• Good hiding properties• Not a vapor barrier• Durable and abrasion resistant• Excellent weathering properties• Low odor• Non flammable• Easy to apply• Pre‑measured kit

Application Rate• 16‑32 WFT mils total applied in two coats • 100‑200 ft.2/gal. (2.4‑4.9 m2/L) per coat

depending on surface profile and porosity



• Do not apply to surfaces above 90°F (32°C) • Protect FX‑214 from freezing;

discard if freezing occurs• Protect coating from rain and

freezing temperatures for 24 hours following installation


• Mudcracking may occur if applied in excess of 100 ft.2/gal. (2.4 m2/L) per coat

• Avoid contact with aluminum surfaces

FX‑214Polymer Cementitious Coating

FX‑214 Polymer Cementitious Coating is a two‑component, polymer‑modified, cementitious, protective and decorative coating designed for waterproofing and damp‑proofing concrete and masonry structures.

Packaging / SKU5 gallon kit (FX214xxxKT3‑1) contains:• 3 gallons of liquid

Component “A” in a 5 gallon pail (FX214‑3A)

• (1) 45 lb. bag of Component “B” (FX214xxx‑B)

ColorAvailable in white, tan or gray. Other colors available by special order.


StorageStore dry between 40–95°F (4–35°C). Protect liquid component from freezing.


CSI Specification 09 97 23 Coatings for Concrete and Masonry


Where to Use• Commercial and industrial applications

requiring moderate chemical resistance• Primary/secondary containment• Water/wastewater: clarifiers, digesters, sludge

thickener tanks, lift stations, manholes• Food processing plants:

walls, trenches, sumps• Marine applications: protection from

salt spray and water intrusion in immersion service applications

• Petrochemical applications• Above and below‑grade applications

Features• Excellent chemical and abrasion resistance

in wastewater and other industiral applicatons• Exceptional resistance to

hydrogen sulfide (H2S) gas• Resists abrasion and staining• Suitable for immersion service• Can be applied to damp (SSD) concrete• Self‑priming for most applications• Can be fabric‑reinforced for added durability• Very low odor

Application Rate• 16–20 DFT mils total applied in two coats • 160–200 ft.2/gal. (3.9‑4.9 m2/L) per coat


Limitations• Do not apply to surfaces below 45°F (7°C)• Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure.

Concrete surface to receive coating must not exhibit an active moisture vapor drive.



• Resistance to in‑service chemical exposure must be confirmed for compatibility prior to applicaton

• Installations subject to immersion service must be verified to be holiday free

FX‑70‑9®

Epoxy Coating

FX‑70‑9 Epoxy Coating is a 100% solids, two‑component, moisture‑tolerant, high‑build protective coating designed to protect steel, concrete and wood.

Specification ComplianceFX‑70‑9 complies with UDSA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact.


(FX70‑9xxxKT3)• 15 gallon kit

(FX70‑9xxxKT15)

ColorAvailable in gray, dark gray, tan and white; other colors available by special order.

Mixing Ratio2A:1B

Mixed Viscosity 13,300 +/‑ 1000 cps at 75°F (24°C)



CSI Specification 09 96 56 Epoxy Coating

EPOXY COATINGS


Per

form

ance

Coa

ting



EPOXY COATINGS

Perform

ance C

oating


requiring moderate chemical resistance and high abrasion resistance

• Primary/secondary containment• Pond/tank lining system• Water/wastewater: protective lining for

steel and concrete tanks, digesters• Marine applications: to protect

concrete, steel, and wood piles and other structural marine elements

Features• Excellent chemical resistance in wastewater

and other tank lining applications• High‑build system• Excellent abrasion resistance• Suitable for in immersion service• Can be applied to damp (SSD) concrete• Self‑priming for most applications• Low odor

Application RateFX 70‑9® Epoxy Coating:• 80 WFT mils total applied in two fabric

saturant coats and one topcoat

FX 70®‑10 Fabric: • Applied in 2 layers with all splices

overlapped 2 in. (5.1 cm) minimum

Fabric Saturant Coats: • FX‑70‑9® Epoxy Coating at 50 ft.2/gal.

(1.2 m2/L) with one layer of FX 70®‑10 Fabric embedded and back‑rolled wet

Topcoat: • FX‑70‑9® Epoxy Coating applied

at 80 ft.2/gal. (2 m2/L)





• Resistance to in‑service chemical exposure must be confirmed for compatibility prior to applicaton

• Installations subject to immersion service must be verified to be holiday‑free

FX‑70®‑10Field‑Formed Protective System

FX‑70‑10 Field‑Formed Protective System is a high‑build, chemical‑resistant, fabric‑reinforced, multi‑layer protective epoxy coating system designed for high abrasion environments. The FX‑70‑10 Field‑Formed Protective System consists of two layers of fiberglass fabric encapsulated in three coats of FX‑70‑9 Epoxy Coating.

Specification ComplianceFX‑70‑10 complies with USDA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact.

Packaging / SKUFX‑70®‑10 Fabric:• 4 in. x 150 ft.

(FXGRF4X50)• 6 in. x 150 ft.

(FXGRF6X50)• 12 in. x 150 ft.

(FXGRF12X50)• 38 in. x 375 ft.

(FXGRF38X125)FX‑70®‑9 Epoxy Coating:• 3 gallon kit

(FX70‑9xxxKT3)• 15 gallon kit

(FX70‑9xxxKT15)

ColorAvailable in gray, dark gray, tan and white; other colors available by special order.

Mixing Ratio2A:1B


Shelf Life• FX‑70®‑10 Fabric:

4 years in unopened packaging

• FX‑70‑9® Epoxy Coating: 2 years in unopened packaging

CSI Specification 09 96 56 Epoxy Coatings



Per

form

ance

Coa

ting

EPOXY COATINGS

Where to Use• Above and below‑grade applications• Commercial and industrial applications

requiring moderate chemical resistance• Primary and secondary containment• Wastewater applications• Marine applications• Petrochemical applications

Features• Moderate chemical resistance in wastewater

and other industrial applications• Flexible and impact resistant• Suitable for immersion service• Chemical and abrasion resistant• Self‑priming for most applications

Application Rate• 16–20 DFT mils total applied in two coats • 135–170 ft.2/gal. (3.3–4.2 m2/L) per coat





• Resistance to in‑service chemical exposure must be confirmed for compatibility prior to application


FX‑420Coal‑Tar Epoxy

FX‑420 Coal‑Tar Epoxy is a high‑solids, two‑component, coal‑tar epoxy coating designed to protect steel, concrete, and wood from chemical exposure.

Specification ComplianceFX‑420 exceeds the performance requirements of Corp. of Engineers C‑200, Federal Specification DOD‑P‑23236 (SHIPS), and SSPC 16‑91.



(FX420KT25)

ColorMixed: Black

Mixing Ratio1A:4B

Mixed Viscosity6,000 cps at 75°F (24°C)






EPOXY COATINGS


requiring moderate chemical resistance• Primary and secondary containment• Wastewater applications• Marine applications• Manhole linings• Petrochemical applications

Features• Moderate chemical resistance in wastewater

and other industrial applications• Suitable for intermittent high‑

temperature exposure• Flexible and impact resistant• Suitable for immersion service• Chemical and abrasion resistant• Can be spray‑applied up to

40 WFT mils in one coat• Self‑priming for most applications

Application Rate• 20–80 DFT mils total applied in two coats• 40–160 ft.2/gal. (1–3.9 m2/L) per coat






• Installations subject to immersion service must be verified to be holiday free

FX‑421High‑Build Coal‑Tar Epoxy

FX‑421 High‑Build Coal‑Tar Epoxy is a 100% solids, two‑component, moisture‑tolerant coal‑tar epoxy coating designed to protect steel, concrete, and wood from chemical exposure.

Specification ComplianceFX‑421 High Build Coal‑Tar Epoxy exceeds the performance requirements of Corp. of Engineers C‑200, Federal Specification DOD‑P‑23236 (SHIPS), and SSPC 16‑91.



(FX421KT25)

ColorMixed: Black

Mixing Ratio2A:3B





Perform

ance C

oating



Where to Use• Epoxy binder for broadcast

overlay coating systems• Epoxy binder for floor toppings• Epoxy mortar for rout‑and‑seal crack filler

Features• Applications as low as 40°F (4°C)• Self‑priming for broadcast

coating applications• Low‑modulus binder for

rout‑and‑seal applications• Can be applied by spray,

squeegee, roller or trowel• Moisture tolerant, can be applied

to damp (SSD) concrete

Application Rate/YieldBroadcast System: • 42–46 DFT mils applied in three coats


Prime Coat: • 150 ft.2/gal. (3.7 m2/L)

Broadcast Coat: • 100 ft.2/gal. (2.5 m2/L) with FX‑701

Oven‑Dried Graded Silica Filler at a rate of 3/4 lbs. per ft.2 (3.6 kg per m2)

Seal Coat: • 80–100 ft.2/gal. (2.0‑2.5 m2/L)

Grout/Mortar:• 231 in.3/gal. (0.001 m3/L) neat• 300–600 in.3/gal. (0.0013–0.0026 m3/L)

when mixed 1–3 parts by volume with FX‑701 Oven‑Dried Graded Silica Filler



• Not recommended for exterior slab on‑grade applications


• Compatible with FX‑701 Oven‑Dried Graded Silica Filler. Alternative aggregates must be oven‑dried


FX‑761MLow‑Modulus Epoxy

FX‑761M Low‑Modulus Epoxy is a low‑viscosity, two‑component, 100% solids, moisture‑tolerant epoxy designed for broadcast flooring systems, grouting and rout‑and‑seal applications.

Specification ComplianceFX‑761M exceeds the performance requirements of ASTM C 881, Type III, Grade 1, Class B.


(FX761MKT3)• 15 gallon kit

(FX761MKT15)• 150 gallon kit

(FX761MKT150)

ColorMixed Epoxy: Dark amber

FinishLow gloss

Mixing Ratio2A:1B




CSI Specification 03 01 00 Maintenance of Concrete 07 18 00 Traffic Coatings

Per

form

ance

Coa

ting

EPOXY COATINGS



Perform

ance C

oating

EPOXY COATINGS

Where to Use• As a binder for anchor and

base plate grouting • Repair mortar for dry or damp

surfaces and bridge decks• Epoxy mortar for floor toppings• Epoxy binder for broadcast

overlay coating systems

Features• High strength• Fast cure

Application Rate / YieldBroadcast System: • 42–46 DFT mils applied in three coats


Prime Coat: • 150 ft.2/gal. (3.7 m2/L)

Broadcast Coat: • 100 ft.2/gal. (2.5 m2/L) with FX‑701

Oven‑Dried Graded Silica Filler at a rate of 3/4 lbs. per ft.2 (3.6 kg per m2)

Seal Coat: • 80–100 ft.2/gal. (2.0‑2.5 m2/L)

Grout/Mortar:• 231 in.3/gal. (0.001 m3/L) neat• 300–600 in.3/gal. (0.0013–0.0026 m3/L)

when mixed 1–3 parts by volume with FX‑701 Oven‑Dried Graded Silica Filler



• Not recommended for exterior slab on‑grade applications


• Not recommended for large exterior repairs or applications subject to large thermal change when used as a repair motar



• When used as an epoxy binder, use FX‑701 Oven‑Dried, Graded Silica Filler to prevent encapsulating moisture

Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives. .

FX‑775Medium‑Viscosity Epoxy

FX‑775 Medium‑Viscosity Epoxy is a two‑component, 100% solids, moisture‑tolerant, medium‑viscosity structural epoxy designed for use as a grout binder and floor coating.

Specification ComplianceExceeds ASTM C 881, Types I and IV, Grade 2, Class B.




(FX775KT150)

ColorLight Straw

Mixing Ratio2A:1B




CSI Specification 03 01 00 Maintenance of Concrete 07 18 00 Traffic Coatings



Per

form

ance

Coa

ting

EPOXY COATINGS


requiring extreme chemical and high‑temperature resistance

• Primary and secondary containment• Chemical Processing/Petrochemical:

tank linings, floors, sumps, trenches• Power: FGD scrubber boxes,

condensers, heat exchangers, tank linings, sumps, trenches, floors

• Water/wastewater: clarifiers, digesters, sludge thickener tanks, lift stations, manholes

• Food‑processing plants: walls, ceilings, floors, trenches, sumps

Features• Extreme chemical resistance in wastewater

and other industrial applications• Excellent resistance to aggressive

acids, bases and petroleum products at a wide temperature range (Sulfuric Acid, Sodium Hydroxide, Skydrol)

• Can be force‑cured to increase chemical resistance

• Resists abrasion and staining• Suitable for immersion service• Self‑priming for most applications• Can be fabric reinforced for added durability• Can be applied by brush, roller, or spray

applied with plural‑component equipment

• Very‑low odor

Application RatePrimary Containment/Immersion Service: • 45–50 DFT mils total applied in two coats• 65–70 ft.2/gal. (1.6–1.7 m2/L) per coat


Secondary Containment: • 30–35 DFT mils total applied in two coats • 90–105 ft.2/gal. (2.2–2.6 m2/L) per coat








FX‑3110SWChemical‑Resistant Novolac Epoxy

FX‑3110SW Chemical‑Resistant Novolac Epoxy is a 100% solids, two‑component, high‑build coating designed to protect steel, concrete, and wood from aggressive chemical exposure in secondary containment and immersion‑service applications.

Specification ComplianceComplies with USDA Food and Safety Inspection Services acceptance for meat and poultry plants for incidental food contact.


(FX3110SWxxxKT3)• 15 gallon kit

(FX3110SWxxxKT15)

ColorGray or tile red, other colors available by special order.

Mixing Ratio2A:1B




CSI Specification 09 96 00 High Performance Coatings



Perform

ance C

oating

WATER REPELLENTS

Where to Use• Damp proofing of new and remedial

concrete, masonry, brick, block and stone• Parking decks, bridges and precast panels• Horizontal and vertical surfaces• Exterior applications

Features• Single component; Ready to use• Easily applied with hand‑pumped

spray equipment• Can be applied by brush, roller,

squeegee, or spray• Not a vapor barrier• Helps prevent mold growth and efflorescence

Application Rate• Concrete: 100–200 ft.2/gal. (2.4–4.8 m2/L)• Brick: 100–200 ft.2/gal. (2.4–4.8 m2/L)• CMU: 80–150 ft.2/gal. (1.9–3.6 m2/L)

Actual application rate may vary due to surface profile and/or porosity.

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 100°F (38°C)• Can cause slight variations

(darkening) in surface color or appearance on some substrates

• Not designed to bridge moving cracks• Do not dilute• Protect from rain for 12 hours

following installation• Mask and protect all adjacent

surfaces to protect from overspray

FX‑425Penetrating Water Repellant

FX‑425 Penetrating Water Repellent is a single‑component, 40% solids, solvent‑based sealer which combines a proprietary blend of silane, siloxane, and solvent to provide maximum penetration into concrete, masonry, and stone. FX‑425 is clear, forming an invisible hydrophobic barrier that repels water and protects the substrate from freeze/thaw cycles and chloride intrusion.


(FX425‑1)• 5 gallon pail

(FX425‑5)• 50 gallon drum

(FX425‑50)

ColorClear



CSI Specification 07 19 23 Water Repellents



Per

form

ance

Coa

ting

WATER REPELLENTS

Where to Use• Damp proofing of new and remedial

concrete and masonry• Parking decks, bridges, precast

panels, brick, block and stone• Horizontal and vertical surfaces• Interior and exterior applications

Features• Does not require masking of

windows or painted surfaces• Can be applied by brush, roller,

squeegee, or spray• Not a vapor barrier• Easily applied with hand‑pumped

spray equipment

Application Rate• Concrete: 200–400 ft.2/gal. (4.8–9.8 m2/L)• Brick: 200–400 ft.2/gal. (4.8–9.8 m2/L)• CMU: 160–300 ft.2/gal. (3.9–7.3 m2/L)

Actual application rate may vary due to surface profile and/or porosity.

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 100°F (38°C)• Can cause slight variations

(darkening) in surface color or appearance on some substrates

• Not designed to bridge moving cracks• Do not dilute• Protect from rain for 12 hours

following installation• Protect all adjacent surfaces from overspray

FX‑427Pure Silane Sealer

FX‑427 Pure Silane Sealer is a single‑component, high‑solids silane sealer designed to penetrate deeply into concrete and masonry. FX‑427 is clear, forming an invisible hydrophobic barrier that repels water and protects the substrate from freeze/thaw cycles and chloride intrusion.


(FX427‑1)• 5 gallon pail


(FX427‑50)

ColorClear



CSI Specification 07 19 16 Silane Water Repellents



Perform

ance C

oating

DECORATIVE/PROTECTIVE

Where to Use• Commercial building façades• Concrete and masonry substrates• New and remedial applications• Exterior applications• Vertical and overhead surfaces• Tilt‑wall and precast panels• Block and brick masonry• Retaining walls• Various DOT applications

Features• Combination water repellent

and architectural coating• Superior weathering resistance• Extended service life• High‑hiding matte finish• Penetrating hydrophobic barrier• Improves freeze/thaw resistance• High vapor transmission rate• Self cleaning/resists chalking• Mold and mildew resistant• Excellent adhesion properties• Water based• Low VOC• Can be applied by brush, roller, or spray

Application RateFX‑460 Topcoat: • 5–8 DFT mils total applied in two coats • 190–300 ft.2/gal. (4.6–7.4 m2/L) per coat


FX‑460 Primer:• 150–300 ft.2/gal. (3.6–7.4 m2/L)



• Do not apply to surfaces above 90°F (32°C)• Protect from freezing; discard

if freezing occurs• For vertical and overhead applications only• Not designed to bridge moving cracks• Adhesion and product compatibility

testing must be performed prior to over‑coating existing coatings

• Topcoat must be installed within 14 days of FX‑460 Primer application

• Protect coating from rain for 4 hours following installation

FX‑460High‑Performance Breathable Coating System

FX‑460 High‑Performance Breathable Coating System is a long‑lasting, self‑cleaning, decorative and protective coating combined with a penetrating, water repellent‑primer (FX‑460 Primer) for unparalleled protection of concrete and masonry structures. The FX‑460 High‑Performance Breathable Coating System utilizes a technologically advanced water‑based silicone resin backbone that chemically bonds to the substrate to form a tough quartz‑like mineral finish with outstanding weathering characteristics.

Packaging / SKUFX‑460• 1 gallon can

(FX460xxx‑1)• 5 gallon pail

(FX460xxx‑5)• 50 gallon drum

(FX460xxx‑50)FX‑460 Primer• 1/2 gallon can

(FX460P‑2QT)• 1 gallon can

(FX460P‑1)• 5 gallon pail

(FX460P‑5)• 50 gallon drum

(FX460P‑50)

ColorGray, tan and white; other colors available by special order.



CSI Specification 09 97 23 Concrete & Masonry Coatings



Per

form

ance

Coa

ting



Features• Bridges hairline cracks• Remains flexible at low temperatures• Excellent color retention• Low dirt pick‑up• Excellent hiding properties• Breathable• Water based• Low VOC• Fast drying• Can be applied by brush, roller, or spray

Coverage Rate• 16 DFT mils total applied in two coats • 100 ft.2/gal. (2.4 m2/L) per coat depending

on surface profile and porosity




if freezing occurs• For vertical, overhead and non‑traffic

bearing horizontal applications• Static cracks larger than 1/32 in. (0.8 mm)

must be filled and detailed prior to coating application

• Dynamic cracks must be filled with an appropriate joint sealant according to manufacturer's installation instructions

• Adhesion and product compatibility testing must be performed prior to over‑coating existing coatings and sealants


FX‑501Elastomeric Coating

FX‑501 Elastomeric Coating is a single‑component, flexible, water‑based acrylic elastomer designed as a protective architectural coating with exceptional elongation properties for concrete, masonry and stucco.


(FX501xxx‑1)• 5 gallon pail

(FX501xxx‑5)• 50 gallon drum

(FX501xxx‑50)

ColorGray and white; other colors available by special order.



CSI Specification 09 97 23 Coatings for Concrete and Masonry



Perform

ance C

oating



Features• Excellent color retention• 100% acrylic resin• Good hiding properties• Breathable• Water based• Low VOC• Fast drying• Can be applied by brush, roller or spray

Application Rate• 2.5–5 DFT mils total applied in two coats • 275–550 ft.2/gal. (6.7–13.5 m2/L) per coat





if freezing occurs• For vertical and overhead applications only• Not designed to bridge moving cracks• Adhesion and product compatibility

testing must be performed prior to over‑coating existing coatings


FX‑505Water‑Based Acrylic Coating

FX‑505 Water‑Based Acrylic Coating is a single‑component, fast‑drying, protective architectural coating for concrete, masonry and stucco. Packaging / SKU

• 1 gallon can (FX505xxx‑1)

• 5 gallon pail (FX505xxx‑5)

• 50 gallon drum (FX505xxx‑50)

ColorGray and white; other colors available by special order.



CSI Specification 09 97 23 Concrete & Masonry Coatings


ProductsSpecialty

RAIL

Where to Use• Railroad crossings• Embedded rail• Flangeway filler• Applications requiring impact resistance• Transit and port facility rail systems• Gantry rail

Features• Field‑mixed and easily placed• Excellent electrical resistance• Impact and freeze/thaw resistant• Impact resistant• Excellent resistance to petroleum

products, salts and mild acids• Provides quick turnaround

and return to service

Application Rate/YieldPrimer: • 10–16 WFT mils total applied in one coat • 100–150 ft.2/gal. (2.5–3.7 m2/L) per coat

depending on surface profile and porosityMortar: • 1.4 ft.3 (0.04 m3) per unit

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Minimum installation thickness 1 in. (2.5 cm) • Maximum 4 in. (10.2 cm) lifts• Material is a vapor barrier after cure.


FX‑120Elastomeric Mortar System

FX‑120 Elastomeric Mortar System is a three‑component elastomeric mortar that combines a specially formulated epoxy and recycled rubber granule aggregate to control stray electrical current, isolate vibration, and dampen noise for embedded rail applications. FX‑120 is chemical‑resistant, unaffected by freeze/thaw cycles and flexes under impact/loading. Used with FX‑120P Primer (sold separately).

Packaging / SKUKit (FX120KT5‑2) includes:• 2.5 gallon pail of

Component “A” (FX120‑2.5A)

• 2.5 gallon pail of Component “B” (FX120‑2.5B)

• (2) 25 lb. bags of Component “C” (FX120‑C)

FX‑120 Primer• 2 gallon kit

(FX120PRIMEKT2)

ColorBlack

Mixing Ratio1A:1B Mortar: 50 lb. Component “C” per 5 gallons mixed epoxy






Where to Use• Embedded rail anchorage• Railroad crossings• Flangeway filler• Transit and port facility rail systems• Gantry rail

Features• Excellent electrical resistance properties• Impact and vibration resistant• Freeze/thaw resistant• Chemical resistant• Moisture tolerant• Fast curing

• Shore A Hardness: 60

Yield• 0.5 ft.3 (0.014 m3) per kit

Limitations• Do not install on surfaces below 40°F (4°C). • Do not apply to surfaces above 90°F (32°C)• Do not thin or use solvents


FX‑583Polyurethane Isolation Grout

FX‑583 Polyurethane Isolation Grout is a three‑component anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX‑583 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal.

Packaging / SKUPre‑proportioned kit (FX583KT2.1‑1) is a 5 gallon pail containing:• 1.85 gallon can

of Component “A” (FX583‑1.85A)

• 1 quart can of Component “B” (FX583‑.25B)

• 25 lb. (11.3 kg) of Component “C” (FX583‑C)

ColorGray; other colors available by special order.

Mixing RatioPre‑proportioned kit. Use entire contents of all components



CSI Specification 03 60 00 Grouting

Sp

ecialty P

rod

ucts

RAIL



Where to Use• Embedded rail anchorage• Railroad crossings• Flangeway filler• Bridge header repair• Transit and port facility rail systems• Gantry rail

Features• Excellent electrical resistance properties• Impact and vibration resistant• Freeze/thaw resistant• Chemical resistant• Moisture tolerant• Fast curing• Shore A Hardness: 85


Limitations• Do not install on surfaces below 40°F (4°C). • Do not apply to surfaces above 90°F (32°C)• Do not thin or use solvents

Please note: This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems for Concrete and Masonry catalog or www.strongtie.com for code-listed structural anchoring adhesives

FX‑587High‑Durometer Polyurethane Isolation Grout

FX‑587 High‑Durometer Polyurethane Isolation Grout is a three‑component, anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX‑587 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal.

Packaging / SKUPre‑proportioned kit (FX587KT2.05‑1) consists of:• 1.8 gallon pail of

Component “A” (FX587‑1.8A)

• 1 quart can of Component “B” (FX587‑.25B)

• (1) 40 lb. bag of Component “C” (FX587‑C)

ColorBlack

Mixing RatioPre‑proportioned kit. Use entire contents of all components




Sp

eci

alty

Pro

du

cts

RAIL



Sp

ecialty P

rod

ucts

Where to Use• Railway anchor bolt grouting

Features• Provides fast turnaround• Low temperature applications

down to 20°F (‑7°C)• Excellent chemical resistance• Pourable• High strength

Yield• 0.175 ft.3 (0.005 m3) per 25 lb. (11.3 kg) kit• 0.35 ft.3 (0.01 m3) per 50 lb. (22.7 kg) kit

Limitations• Do not apply to surfaces below 20°F (‑7°C)• Do not apply to surfaces above 60°F (16°C)


FX‑816Low‑Temperature Polyester Grout

FX‑816 Low‑Temperature Polyester Grout is a three‑component, 100% solids, fast‑setting, flowable, polyester‑based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications below 50°F (10°C).

Packaging / SKU25 lb. pre‑proportioned kit (FX816KT25) is a 3.5 gallon pail consisting of:• ½ gallon can of

Component “A” (FX816‑.5A)

• 4 fl. oz. jar of Component “B” (FX816‑.03B)

• 20 lb. bag of Component “C” (FX816‑C20)

50 lb. pre‑proportioned kit (FX816KT50) is a 5 gallon pail consisting of:• 1 gallon can of




ColorTan


StorageStore dry between 45–80°F (7–27°C).

Shelf Life3 months


RAIL

56 F‑R‑PG13 ©2013 Simpson Strong‑Tie Company Inc. (800) 999‑5099 | strongtie.com56


RAIL

Sp

eci

alty

Pro

du

cts

Where to Use• Railway anchor bolt grouting

Features• Provides fast turnaround• For installations between 50°F

(10°C) and 90°F (32°C) • Excellent chemical resistance• Pourable• High strength

Yield• 0.175 ft.3 (0.005 m3) per 25 lb. (11.3 kg) kit• 0.35 ft.3 (0.01 m3) per 50 lb. (22.7 kg) kit

Limitations• Do not apply to surfaces below 50°F (10°C)• Do not apply to surfaces above 90°F (32°C)


FX‑830Polyester Grout

FX‑830 Polyester Grout is a three‑component, 100% solids, fast‑setting, flowable, polyester‑based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications above 50°F (10°C).

Packaging / SKU25 lb. pre‑proportioned kit (FX830KT25) is a 3.5 gallon pail consisting of:• ½ gallon can of

Component “A” (FX830‑.5A)



50 lb. pre‑proportioned kit (FX830KT50) is a 5 gallon pail consisting of:• 1 gallon can of




ColorTan



Shelf Life3 months




GROUTS (CEMENTITIOUS)

Sp

ecialty P

rod

ucts

Where to Use• For grouting base plates, column bearings,

bridge bearing seats, pump bases, tank bases, generators and compressors

• As a pre‑stress deck beam keyway grout • Grouting of anchor bolts,

rebar and dowel bars • In sulfate‑rich environments such

as wastewater treatment facilities and marine environments

Features• Minimum application thickness

of 1/2 in. (1.3 cm) neat • Remains highly fluid for applications

requiring extended working time • Initial set time of 4 hours for

extended working time • High compressive strengths and high

early strengths for quick turnaround • Excellent freeze/thaw resistance • Excellent resistance to oils, water

and sulfates • Can be pumped or poured • Can be extended with up to 30 lb. (13.6 kg)

per bag with 3/8 in. (0.9 cm) coarse aggregate• Ready to use, simply add potable water

Yield• 0.5 ft.3 (0.014 m3) per 55 lb.

(24.9 kg) bag (neat) • 0.68 ft.3 (0.019 m3) per 55 lb. (24.9 kg)

bag extended with 30 lbs. (13.6 kg) 3/8 in. (0.9 cm) coarse aggregate

Limitations• Do not apply to surfaces below 35°F (2°C)• Do not apply to surfaces above 90°F (32°C)• Maximum 161 fl. oz. (4.76 L) of

water per 55 lb. (24.9 kg) bag • Minimum application thickness

of 1/2 in. (1.3 cm) • Maximum lift thickness of 3 in. (7.6 cm) neat


FX‑228®

High‑Strength Non‑Shrink Precision Grout

FX‑228® High‑Strength Non‑Shrink Precision Grout is a high‑performance, non‑metallic grout developed for long working time and rapid strength gain.

Specification ComplianceFX‑228 exceeds the performance requirements of ASTM C 1107 Grades A, B and C and Corps of Engineers CRD C 621.


(FX228)



CSI Specification 03 62 00 Non‑Metallic Non Shrink Grout



GROUTS (CEMENTITIOUS)

Sp

eci

alty

Pro

du

cts

Where to Use• For grouting base plates, column bearings,

bridge bearing seats, pump bases, tank bases, generators and compressors

• As a pre‑stress deck beam keyway grout • Grouting of anchor bolts,

rebar and dowel bars• In sulfate‑rich environments such

as wastewater treatment facilities and marine environments

Features• Minimum application thickness

of 1/2 in. (1.3 cm) neat • High compressive strengths and high‑

early strengths for quick turnaround • Excellent freeze/thaw resistance • Excellent resistance to oils, water

and sulfates • Can be extended with up to

30 lb. (13.6 kg) per bag with 3/8 in. (0.9 cm) coarse aggregate

• Ready to use, simply add potable water

Yield• 0.5 ft.3 (0.014 m3) per 55 lb.

(24.9 kg) bag (neat) • 0.68 ft.3 (0.019 m3) per 55 lb. (24.9 kg)

bag extended with 30 lb. (13.6 kg) of 3/8 in. (0.9 cm) coarse aggregate

Limitations• Do not apply to surfaces below 35°F (2°C)• Do not apply to surfaces above 90°F (32°C)• Maximum 161 fl. oz. (4.76 L) of

water per 55 lb. (24.9 kg) bag • Minimum application thickness

of 1/2 in. (1.3 cm) • Maximum lift thickness of 3 in. (7.6 cm) neat


FX‑229Non‑Metallic Non‑Shrink Construction Grout

FX‑229 Non‑Metallic Non‑Shrink Construction Grout is a high‑performance, non‑metallic grout developed for long working time and rapid strength gain. Packaging / SKU

• 55 lb. bag (FX229)



CSI Specification 03 62 00 Non‑Metallic Non Shrink Grout



GROUTS (EPOXY)

Sp

ecialty P

rod

ucts

Where to UseTo seat and support machinery and equipment operating under heavy load, high‑impact, torque and other high‑stress conditions:

• Transportation industry utilities• Grout pads• Crushers• Generators• Anchor bolts• Millers• Steam turbines• Crane rails• Blowers• Transformers• Lathes• Power plants• Oil and gas transmission• Pulp and paper mills• Petrochemical plants• Water and wastewater facilities

Features• Pre‑proportioned, self‑contained

package provides consistent results• Moisture tolerant, can be used on

dry and damp (SSD) surfaces• Superior chemical resistance

compared to cement‑based grouts• May be placed up to 3 in. (7.6 cm) thick


Limitations• Do not apply to surfaces below 50°F (10°C)• Do not apply to surfaces above 90°F (32°C) • Material is a vapor barrier after cure.

Concrete surface to receive grout must not exhibit an active moisture vapor drive.

• Minimum application thickness is 1/2 in. (1.3 cm).

• Maximum installation depth is 3 in. (7.6 cm).• Epoxy grouts can crack due to thermal

stress. Do not form more than 4 in. (10.2 cm) beyond the plate to limit thermal cracking



FX‑1200Industrial Epoxy Grout

FX‑1200 Industrial Epoxy Grout is a three‑component, flowable, self‑leveling grout composed of 100% solids epoxy resin and proprietary aggregate. Packaging / SKU

Pre‑proportioned kit (FX1200KT) is a 6 gallon pail containing: • 1 gallon pail of

component “A” (FX1200‑1A)

• 1/2 gallon can of component “B” (FX1200‑.5B)

• 50 lb. bag of component “C” (FX1200‑C)


Shelf Life2 years

CSI Specification 03 63 00 Epoxy Grouting



FX‑70® STRUCTURAL REPAIR AND PROTECTION SYSTEM

Sp

eci

alty

Pro

du

cts

Attack of structures at the waterline is commonplace in marine environments. Tidal action, river current, salt water exposure, chemical intrusion, floating debris, marine borers, electrolysis and general weathering are all examples of factors affecting the lifecycle of structures in marine environments addressed by the FX‑70® Structural Repair and Protection System.

FX‑70®

To protect the structure from external attack, the FX‑70 Structural Repair and Protection System starts with a high‑strength fiberglass interlocking jacket. The tongue‑and‑groove seamed jacket provides a corrosion‑resistant shell to the repair site, ranges from 1/8 in. to ½ in. thickness, and is UV‑resistant.

High‑Strength Grouting MaterialsFX‑70‑6 Hydro‑Ester® Multi‑Purpose Marine Epoxy Grout and FX‑225 Non‑Shrink Non‑Metallic Underwater Grout are both high‑strength, water‑insensitive repair compounds. FX‑70‑6 MP provides excellent bond to concrete, steel, wood and other common building materials. These products displace existing water and can easily be placed into the FX‑70 jacket without the costly building of cofferdams or dewatering of the repair site. FX‑70‑6 MP is ideal for repairs to structures with less than 25% section loss, and is commonly combined with FX‑225 to reduce material cost on large jobs or to repair structures with greater than 25% section loss.

Advantages• Repair damage in‑place, no need

to dewater or take structure out of service

• High‑strength materials bond well to various substrate materials

• Corrosion‑free system prevents deterioration, weathering and erosion

• Accommodates piles of various shape and size

• System is low‑maintenance following repair

• Safe for use in marine‑life habitats

• UV‑resistant

The State of Maryland chose the FX‑70® Structural Repair and Protection System to repair and protect more than 300 damaged piles of the Chesapeake Bay Bridge in the mid‑1980s. A follow‑up inspection of these piles in 2012 showed no deterioration since installation.



FX‑70® STRUCTURAL REPAIR AND PROTECTION SYSTEM

H‑shaped

Square

Octagon

Round

Custom sizes

Technical SpecificationsProperty Test Method Result

Water Absorption ASTM D 570 1% Max

Compressive Strength — 18,000 psi min.

Ultimate Tensile Strength ASTM D 638 15,000 psi min.

Flexural Strength ASTM D 796 25,000 psi min.

Flexural Modulus of Elasticity ASTM D 790 700,000 psi min.

Barcol Hardness ASTM D 2583 45 +/‑ 5

Each FX‑70 jacket is custom made to the precise specifications of each repair project. As the pioneer in jacket repair, Fox Industries, Inc. (now a part of Simpson Strong‑Tie) has refined production and quality control standards over the past 40 years to ensure only the highest‑quality products are shipped to the jobsite. Hand‑made and assembled in the U.S.A., the FX‑70 jacket has over 40 years of in‑service performance.

FX‑70 Jackets are available in the following shapes: • Round H‑Pile• Square Octagonal

Sp

ecialty P

rod

ucts



UNDERWATER

Sp

eci

alty

Pro

du

cts

Where to UseMost underwater applications, including: • Pools• Piers• Concrete aquariums• Sumps and pits

Features• Ready to use, simply add potable water• Dry pack by hand, no forming necessary• Excellent bond, even underwater


Limitations• Do not apply to surfaces below 35°F (2°C)• Do not apply to surfaces above 90°F (32°C)• Condition material to 50°F

(10°C) prior to placement

FX‑70‑8DPUnderwater Repair Mortar

FX‑70‑8DP Underwater Repair Mortar is a single‑component, rapid‑hardening, cementitious repair mortar designed for hand‑pack applications underwater. Packaging / SKU

• 50 lb. (22.7 kg) bag (FX70‑8DP)


ColorGray



Where to Use• Underwater repair of concrete,

wood and steel• Non‑structural underwater

repair of marine structures

Features• May be applied underwater• Hand mixed• Bonds well to wet surfaces• Paste viscosity

Limitations• Do not apply to surfaces below 50°F (10°C)• Do not apply to surfaces above 100°F (38°C)• Minimum lift thickness of 1/8 in. (0.3 cm)• Maximum lift thickness of 2 in. (5.1 cm)

This product has not been evaluated for resisting long-term sustained loads in anchor applications. Refer to the current Anchoring and Fastening Systems catalog or www.strongtie.com for code-listed structural anchoring adhesives.

FX‑764Splash Zone and Underwater Paste

FX‑764 Splash Zone and Underwater Paste is a two‑component, 100% solids, moisture‑tolerant, non‑sag, trowel‑grade epoxy designed for use in underwater applications. FX‑764 is ideal for underwater crack sealing, securing injection ports, anchoring, doweling, pinning, and general repair of concrete, steel and wood.

Packaging / SKU• 1/2 gallon kit

(FX764KT2QT)• 2 gallon kit



(FX764KT10)

ColorGray

Mixing Ratio1A:1B






EPOXY

Sp

ecialty P

rod

ucts

Where to Use• Pitted steel repair• Stripped threads• Pump impellers• I‑Beam patching• Pumps and valves

Features• Bonds well to most steel surfaces• Heat resistant to 400°F (204°C)• When cured can be machined,

drilled, tapped and sanded• Can be mixed by hand

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 90°F (32°C)• Do not use in‑service conditions

above 400°F (204°C)• Allow FX‑738 Metal‑Filled Epoxy Paste to

fully cure before drilling or machining

FX‑738Metal‑Filled Epoxy Paste

FX‑738 Metal‑Filled Epoxy is a two‑component, 100% solids, moisture‑tolerant, non‑sag, trowel‑grade epoxy designed to repair most metal surfaces found in transportation, industrial, marine, petrochemical and power generation facilities. Available in standard and slow‑set (FX‑738S) versions.

Packaging / SKUStandard Set:• 1 kg. kit

(FX738KT1KG)• 1 gallon kit

(FX738KT1)Slow Set:• 1 kg. kit

(FX738SKT1KG)• 1 gallon kit

(FX738SKT1)

ColorGray

Mixing Ratio3A:1B



FILLERS

Where to Use• For use as a filler in epoxy resin systems• Non‑skid wear course in various

broadcast coating systems

Features• Oven‑dried prior to packaging• Moisture content 0.1%• Hardness MOH scale: 7 minimum • Consistent gradation• Convenient packaging

FX‑701Oven‑Dried Graded Silica Filler (Medium)

FX‑701 Oven‑Dried Graded Silica Filler is a special blend of medium‑sized aggregates designed for use with various epoxy resin systems and broadcast flooring applications. Packaging / SKU

60 lb. bag (FX701‑60)





SOLVENTS

Sp

eci

alty

Pro

du

cts

Where to Use• Cleaning of pumps, hoses and injection

ports used to inject FX‑JETSET products • To prevent build‑up of FX‑JETSET

product in pumping equipment or hoses when job conditions require interruption of injection process

Features• Formulated to be compatible

with most injection/pumping equipment, gaskets and hoses

• Designed not to swell or break down solvent resistant gaskets

• Soaking aid for removing urethane build‑up

Limitations• FX‑JETSET Cleaner is FLAMMABLE!

Keep away from high heat, open flame, or other sources of ignition

• Do not apply to surfaces above 100°F (38°C)• Use only in well‑ventilated areas • Compatibility with specific pump equipment/

hoses/gaskets must be tested prior to use • Do not use on hot equipment.

Allow to cool prior to use.

FX‑JETSET CleanerFX‑JETSET Cleaner is a specially formulated solvent designed to dissolve and remove partially or fully cured FX‑JETSET products from pumping equipment, hoses, ports, and other installation components.


(FXJETCLEAN‑1)• 5 gallon pail

(FXJETCLEAN‑5)

ColorLight Amber


Shelf Life4 years

Where to Use• Cleaning of pumps, hoses and injection

ports used to inject FX‑JETSET products • To prevent build‑up of FX‑JETSET

product in pumping equipment or hoses when job conditions require interruption of injection process

Features• Non flammable• Formulated to be compatible



• Soaking aid for removing urethane build‑up

Limitations• Do not apply to surfaces above 100°F (38°C)• Use only in well‑ventilated areas • Compatibility with specific pump equipment/

hoses/gaskets must be tested prior to use • Do not use on hot equipment.

Allow to cool prior to use

FX‑JETSET Safety CleanerFX‑JETSET Safety Cleaner is a specially formulated, non‑flammable solvent designed to dissolve and remove partially or fully cured FX‑JETSET products from pumping equipment, hoses, ports, and other installation components.


(FXJETCLEAN‑S1)• 5 gallon pail

(FXJETCLEAN‑S5)

ColorLight Amber


Shelf Life4 years



SOLVENTS

Sp

ecialty P

rod

ucts

FX‑Epoxy Cleaner


(FXEC‑1)• 5 gallon pail

(FXEC‑5)



FX‑Epoxy Cleaner is a specially formulated solvent designed to clean and remove epoxy residue from installation equipment and other surfaces.

Where to Use• Cleaning of pumps, hoses,

installation and spray equipment

Features• Formulated to be compatible



• Soaking aid for removing epoxy build‑up• VOC exempt

Limitations• FX‑Epoxy Cleaner is FLAMMABLE!

Keep away from high heat, open flame, or other sources of ignition.

• Do not apply to surfaces above 100°F (38°C) • Use only in well‑ventilated areas• Compatibility with specific pump equipment/

hoses/gaskets must be tested prior to use• Do not use on hot equipment.

Allow to cool prior to use.

Where to Use• Curing and sealing freshly placed concrete • For dust‑proofing concrete• As an economical low‑build clear floor sealer• Suitable for interior or exterior applications

Features• Low odor• Quick dry and water cleanup• Can be applied by brush, roller or spray• UV resistant• Low VOC• Non flammable

Application Rate• 150 ft.2/gal. (3.7 m2/L) as a curing

and sealing compound• 200–400 ft.2/gal. (4.9–9.8 m2/L) per coat

as sealer, 2 coats recommended

Limitations• Do not apply to surfaces below 40°F (4°C)• Do not apply to surfaces above 110°F (43°C)• Protect from freezing; discard

if freezing occurs. • Protect from rain until fully cured• Use of FX‑15 can impair the adhesioin of

subsequent coatings, overlays, toppings, sealants, and penetrating sealers. Test for compatibility to insure system compatibility.

• Will not prevent rubber tire marks • Product compatibility testing

must be performed prior to over‑coating existing sealers

FX‑15Water‑Based Cure and Seal

FX‑15 Water‑Based Cure and Seal is an acrylic emulsion, resistant to yellowing from UV exposure. It is designed to prevent rapid water loss during the curing process of freshly placed concrete. Applied to hardened concrete, FX‑15 has a glossy sheen that protects concrete from staining and reduces dusting.

Specification ComplianceFX‑15 exceeds the performance requirements of ASTM C 309 and AASHTO M‑148 Type 1, Class B.

Packaging / SKU• 5 gallon pail


(FX15‑50)

ColorLiquid: White Dry: Clear



CSI Specification 03 39 00 Concrete Curing

CURING COMPOUNDS



NOTES

Don't replace. Repair in place.

With 40+ years of proven performance, our FX-70® structural repair and protection system repairs concrete, steel and wood piles and protects against further deterioration. From custom-manufactured fiberglass jackets to underwater epoxies and cementitious grouts, we have cost-effective, practical, long-term solutions for your repair projects.

Since 1956, Simpson Strong-Tie has brought innovative solutions to customers’ construction challenges. To learn more about our products that repair, protect and strengthen, call us at 800-999-5099 or visit www.strongtie.com/rps.

800-999-5099www.strongtie.com

This flier is effective until June 30, 2014, and reflects information available as of September 1, 2013. This information is updated periodically and should not be relied upon after June 30, 2014; contact Simpson Strong-Tie for current information and limited warranty or see www.strongtie.com.

© 2013 Simpson Strong-Tie Company Inc. • P.O. Box 10789, Pleasanton, CA 94588 F-R-PG13 9/13 exp. 6/14

Simpson Strongtie Concrete Repair and Strengthening Systems

Services

Transcript of Simpson Strongtie Concrete Repair and Strengthening Systems