SIMOTICS GP/SD VSD10-Line - Sales...
Transcript of SIMOTICS GP/SD VSD10-Line - Sales...
-
Restricted / © Siemens AG 2014. All Rights Reserved. siemens.com/simotics-gp
SIMOTICS GP/SD VSD10 lineSales slides
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 2 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
The new motors SIMOTICS GP/SD – VSD10 linein response to new market trends
The challenge:Electric power costs significantly impact the competitiveness ofcompanies.Solution:Using converter-fed motors, energy costs can be slashed by up to70%.
The challenge:General establishment of regionally different MEPS* requirements
Solution:Power Drive System (PDS) that can be globally used is preparedfor future system standards
The challenge:Increase efficiency from planning and commissioning up tooperationSolution:System components that are optimized with one another, startingfrom the initial investment up to operating data and availability
*MEPS: Minimum Efficiency Performance Standard
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 3 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
SIMOTICS GP/SD – VSD10 line supplementsSIMOTICS GP/SD in the power range up to 200kW
DC motors
SIMOTICS ®
High-voltagemotors
GP
Low-voltage motors
for line and converter operation
SD XP DP TN DC HVHT
Direct Current High Voltage
FD
GeneralPurpose
DefinitePurpose
Trans-standard
SevereDuty
Explosionprotected
HighTorque
FlexibleDuty
Motors
for motion control applications
Servo Main Linear Torque
S M L T
1LE1
mot
ors
optim
ized
for
line
oper
atio
n(D
OL)
1LE1
mot
ors
optim
ized
for
line
oper
atio
n(D
OL)
Power rating in kW
SH: Basis 4-pole
2,2 20015100 112 132 160 180 200 225 250 280 315
SIMOTICS GP
SIMOTICS SD
GP
SD
1LE1
.9co
nver
ter
optim
ized
mot
ors
(VSD
)
1LE1
.9co
nver
ter
optim
ized
mot
ors
(VSD
) SIMOTICS GPVSD 10 Line
SIMOTICS SD VSD10 Line
TN
FD
9080
GP
SD
0,55
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 4 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
SIMOTICS GP/SD – VSD10 line can be operated withall SINAMICS converters
SINAMICS G SINAMICS S
G120C G120 G120P G110D/G120D
G130 G150 G180 S120(AC/AC)
S120(DC/AC)
S150(AC/AC)
G130
G150
G120PG120
Cab
inet
Cab
inet
Cha
ssis
Cha
ssis
Blo
cksi
zeB
lock
size
G120P
SIMOTICS GP/SD VSD 10
S120
S120
S120
Boo
k-si
zeB
ook-
size S120
Power rating in kW
SH: Basis 4-pole
2,2 200100100 112 132 160 180 200 225 250 280 3159080
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 5 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
SIMOTICS GP/SD – VSD10 line offers a whole wealth ofadvantages when operated with SINAMICS converters
Guaranteedmotor power when fedfrom a converter
+
Motor protectionoptions alreadyintegrated as standard
+
Fast and straightforwardcommissioning bytransferring the motorcode to the converter
+
Lower systemcosts based on perfectlyharmonized andcoordinated components
+
Flexible operation (4Q)possible with SINAMICSG/S converters(ALM,SLM,BLM)
+Top highlights
Suited for frequentswitching operation cyclesdue to low moment ofinertia
+
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 6 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
Integrated Drive System
• Motor assigned to the preferred converterin the new Catalog supplement SIMOTICSstandard motors (D81.1)
• Couplings assigned to the preferred motorsin the Catalog SINAMICS G120P (D35)
• Motor can be integrated via SINAMICS andPROFINET into TIA
Fully integrated drive components and energyefficiency offer clear advantages in operation
Value added topics
Energy efficiency• Can be combined with SINAMICS energy-
efficient functions, such as energy recovery,ECO mode and energy balancing
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 7 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
The SIMOTICS GP/SD – VSD10 line based on a well-proven motor platform
AdvantagesFeatures / Functions
• Platform concept
• Identical power density asSIMOTICS GP/SD linemotors
• Low moment of inertia
• Insulated bearings forSH280/315 as standard(optionally, from SH 225)
• KTY temperature sensorincluded as standard
• Optional vibrationmonitoring
Benefits
• Simple retrofit and spareparts stocking
• Wide range of options forcustomization
• Same mounting dimen-sions as standard motors(identical shaft height)
• Reduced energy demandwhen frequent switchingoperation cycle
• Increased plant andsystem availability
• Operating conditions canbe monitored at any time
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 8 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
SIMOTICS GP/SD – VSD10 line and SINAMICSconverters are a strong team
Features/functions
• Converter-specific powerdata
• Simple commissioning dueto predefined parametersin SINAMICS G120
• Optimum voltageutilization when operatedwith SINAMICS G
• Special insulation system
• Converter motor accordingto IEC 60034-25
Benefits
• Guaranteed output power• No derating
• Commissioning andmaintenance time andcosts are reduced
• Motor losses are reduced• Operational reliability is
increased
• 4Q operation withSINAMICS G/S (ALM, SLM,BLM) possible without anyrestrictions
• Can be used in all of themain international marketswithout any additionalEnergy Label(e.g. EISA, ErP)
Advantages
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 9 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
SIMOTICS GP/SD – VSD10 line from 2.2kW up to200kW
SIMOTICS GP/SD VSD10Frame size SIMOTICS GP: SH100 – SH160 (aluminum)
SIMOTICS SD: SH100 – SH315 (cast iron)
Power range / SH 2.2 kW – 200 kW (referred to a 4-pole machine)Efficiency class Prepared for future IES classesNo. of poles 4-poleSpeed 1500 rpm (50Hz) / 1800 rpm (60Hz) /
2610 rpm (87Hz version)
Voltage Converter input voltage: 400V (50Hz) / 480V (60Hz) / 230V (50Hz)Motor terminal voltage: 380V (50Hz) / 440V (60Hz) / 220V (50Hz)
Certificates CE, (UL, CSA-S is planned)
Degree of protection Standard IP 55 / optional: IP 56, IP65Temperature class 155(F) according to 155(F)Cooling method Self cooled and separately ventilated
An overview of the technical data
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 10 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
Developed for applications with standardrequirements regarding converter operation
Pumps
• Optimized for square-law characteristics inconjunction with SINAMICS G120P
• Optimized for rotating and oscillating pumps
Fans
• Optimized for radial and axial fans• Ideal drive system for fluid flow machines
Conveyor technology
• Ideal for frequently changing duty cycles• Also for a wide constant torque range (87Hz
characteristic)
Applications
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 11 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
Utilize the SIMOTICS GP/SD – VSD10 line to increaseyour cost effectiveness
Reduce your investment andoperating costs …
• by using the platform concept
• by using system advantageswith SINAMICS G120 (P)
-
2014-April
Restricted / © Siemens AG 2014. All Rights Reserved.Page 12 simotics-gp-sd-vsd10-line-sales-slides-en.pptx; I DT LD P
Thank you for your attention!
Ing.Miloslav Karlik
I DT LD
E-Mail: [email protected]
siemens.com/simotics-gp