simoneau - Myrggo · PLANT CARACTERISTICS ⦿ 30 tons of lifting capability ⦿ 23 foot clearance...
Transcript of simoneau - Myrggo · PLANT CARACTERISTICS ⦿ 30 tons of lifting capability ⦿ 23 foot clearance...
Simoneau Presentation
SIMONEAU’S HISTORY
• 1984: Establishment of a maintenance/repair company.
• 1992: Boilermaking Manufacturer’s Licence.
• 1994: Construction of a 44,000 s.f. plant.
• 1999: Simoneau designs and supplies boilers in association with
Thermodesign.
• 2013: Acquisition of Servitech Energy, a well established service
company in Quebec.
• To date Simoneau has shipped world wide over 300 CUSTOM MADE and
REFURBISHED boilers.
• 150 full time employees.
• Capacity of up to 200 000 hours of work.
SIMONEAU INTEGRATED OFFER
⦿ Engineering/Design ⦿ Manufacturing ⦿ Installation ⦿ Distribution/Spare Parts ⦿ Maintenance ⦿ Refurbishment & Upgrades ⦿ Training Center
PLANT CARACTERISTICS⦿ 30 tons of lifting capability ⦿ 23 foot clearance under the crane hooks ⦿ 12 full size doors ⦿ 44,000 s.f. plant ⦿ Plate rolling capacity up to ½’’ ⦿ Welding: any plate thickness ⦿ Plate bending capability = ⅜’’ thick x 10’ long ⦿ Tube bending: up to 2 ½’’ in diameter x 50’ long ⦿ 2 bending machines ⦿ Longitudinal fin welder up to 24’ long ⦿ Plasma cutting table, 20’ x 10’ ⦿ X-rays and stress relief are subcontracted ⦿ ASME Quality Control System ⦿ Important boiler tubes and pipes inventory
LABOR FORCE SKILLS
⦿ Assemblers ⦿ Welders ⦿ Pipe fitters ⦿ Boilermakers ⦿ Engineers ⦿ Project Managers ⦿ Administration ⦿ Quality Control ⦿ Combustion Technician ⦿ Start up & Commissioning Technician
PLANT IS ASME CERTIFIED
CERTIFICATION
• ASME/ National Board • Sect. I – « S » Stamp • Sect. IV – « H » Stamp • Sect. VIII, div. 1 – « U » Stamp • « R » Stamp
QUALITY CONTROL
Certified by:
• National Board of Boiler and Pressure Vessel
• American Society of Mechanical Engineers (ASME)
• Canadian Welding Bureau and the TEMA Standards.
Simoneau meets all applicable jurisdiction standards
• ASME, National Board (US), B31.1, B31.3 (US Piping)
• B51 (CDN)
SERVICES OFFERING AND PRODUCT LINE
Provides design and engineering services:
• Custom design of new installations or replacement.
• Existing boilers performance analysis.
• Boiler design upgrades for increased performances.
• Thermodesign represents more than 150 years of combined experience in boiler design.
THERMODESIGN
AQT SERIES
AQT (Flex-tube, Watertube Boilers)
• 20 HP to 70,000 PPH of high & low pressure steam
➢ Saturated or superheated steam
• AQT is provided with integrated finned tube economizer
➢ Provides 85% combustion efficiency burning natural gas
• AQT provides advantages over packaged firetube boilers
• AQT provides an excellent alternative to “D” Type Boilers
AQT Watertube Boiler High pressure Steam with Integrated Economizer,
provides 85% Combustion Efficiency burning natural gas
High efficiency Boiler High pressure steam up to 650 psig
Integrated Economizer
AQT Advantages • Staggered tubes for maximum heat transfer • Rear water wall – no refractory • Tubes expanded and flared in steam drum • Manway in steam drum • Pipe sized downcomers • Natural water circulation – no pumps needed • Provide structural supports • Boiler can be laid on either side • Integrated finned tube economizer
➢ Providing 85% efficiency ➢ Becomes 3 – pass boiler with economizer
• Ease of tube replacement ➢ 3’ to 5’ either side
• Smaller foot-print than firetube
High efficiency Boiler 600 HP, High pressure Steam c/w Integrated
economizerWater Inlet
To Economizer
Feed Water Inlet to Control Valve
Simoneau HTHW Generator “The next generation in producing high temperature, high
pressure hot water”
• Design Features
• Capacities up to 75 mmbtu/hr
• Design pressures up to 500 psig
• Temperatures up to 400 °F
• Delta T to 150 °F
• 2-pass flue gas contact with staggered tube arrangement for maximum heat transfer
• Balanced heat transfer to prevent thermal shock, steaming and hot spots
• Optional integrated finned tube economizer available on most capacities
Simoneau HTHW Generator 10 mmbtu/hr, installed in USA at USI
Large Capacity Watertube Boilers
• 20,000 PPH to 250,000 PPH
• Saturated or superheated steam
• “D” type – Long history and dependable performances
• “A” type – Provides more “over-the-road” transportability
• Waste Heat Recovery Boilers – designed per application
D-TYPE SERIES
Boiler pressure parts being assembled in our plant
D-TYPE 40,000 PPH
D-Type field erected boilers Capacity: 132 tons/hr
300,000 PPH of superheated steam Mud drum
A-TYPE SERIES
“A”-Type Boiler 80 tons/hr
Superheated steam
Open bottom A–Type , 100,000 PPH
for wood-fired combustion
Superheater being installed in the boiler
4 x 80 Tons A-Type Boilers
We provide detailed P & ID Drawings with Operating/Instruction Manuals for all Equipment
Simoneau designs & manufactures deaerators to provide quality feed
water for watertube boilers
Deaerators Designed up to 350,000 PPH capacity
Spray Valves with Tray Design
Bell type deaerator Deaerating capacity of
95,000 PPH
Deaerators designed up to 20,000 PPH with “spray
valves”, without external bell
350,000 PPH deaerator trial fit
Complete “Power Island” Capability
Design, Engineering and manufacturing of ASME
Equipment
ALGERIAPOWER ISLAND
Design, Engineering and Manufacturing of ASME Equipment
AQT 1500 BD 48’’ x 60’’
THANK YOU!