SILICONE FLUIDS, EMULSIONS AND RESINS · • Oil & gas – defoamers, demulsifiers, hydrophobizing...
Transcript of SILICONE FLUIDS, EMULSIONS AND RESINS · • Oil & gas – defoamers, demulsifiers, hydrophobizing...
PARTNERS IN PROGRESS | INNOVATIVE SOLUTIONS
SILICONE FLUIDS, EMULSIONS AND RESINSSilicone Fluids, Emulsions, and Resins Serve Many Applications
WACKER, a world-leading producer ofsilicones, offers a broad range of perfor-mance-enhancing products supported by hands-on technical support and decades of experience.• WACKER® functional fluids and
emulsions• WACKER® silicone glycols• WACKER® polydimethysiloxane fluids• WACKER® release agents• GENIOPLAST® Pellet S for plastics• SILFOAM® antifoam agents• SILRES® silicone resins
22
Silicone Fluids, Emulsions and Resins Characteristics
Product Type Product Name Form Chemistry Diluent SiliconeContent(%)
Viscosity(cps)
Aminofunctional
WACKER® AF 21 Fluid Amino PDMS None > 90 2,000
WACKER® AF 23 Fluid Aminoethyl aminopropyl None > 95 4,500
WACKER® F756 Fluid Amino PDMS None 100 20
WACKER® F784 Fluid Amino PDMS None 100 60
AntifoamEmulsions (Food Grade)
SILFOAM® SE 11 Emulsion PDMS + auxiliaries Water 5 400 – 1,000
SILFOAM® SE 20 Emulsion PDMS + auxiliaries Water 13 400 – 1,000
SILFOAM® SE 21 Emulsion PDMS + auxiliaries Water 10 1,000 – 5,000
SILFOAM® SE 23 Emulsion PDMS + auxiliaries Water 30 3,000 – 15,000
SILFOAM® SE 33 Emulsion PDMS + auxiliaries Water 20 1,000 – 2,000
Antifoamemulsions
SILFOAM® SE 24 Emulsion PDMS + auxiliaries Water 10 300 – 7,000
SILFOAM® SE 2210 Emulsion PDMS + auxiliaries Water 10 400 – 1,000
Glycol WACKER® SG 3381 Fluid Silicone glycol None 100 180 – 250
High heat coatingemulsions
SILRES® M97E Emulsion Methyl resin Water 53 10 – 5,000
SILRES® MP 50E Emulsion Methyl phenyl resin Water 50 100 – 200
High heatcoating fluids
SILRES® MSE 100 Fluid Methyl polysiloxane (methoxy functional) None 100 20 – 35
SILRES® REN 50Fluid
Methyl phenyl resin (hydroxyl functional) Xylene/n-Butanol
50 135 – 185
SILRES® REN 80 Fluid Methyl phenyl resin (hydroxyl functional) Xylene 82 2,000
High heat coating powders
SILRES® 604 Flakes Methyl phenyl resin (hydroxyl/alkoxy) None 100 N/A
SILRES® MK Powder Powder Methyl resin None 100 N/A
Hydroxyl functional WACKER® F1006 Fluid Hydroxyl PDMS None 100 90
Non-functionalfluids, emulsionsand pellets
WACKER® AK Fluids-LV Fluid PDMS None 100 50 – 500
WACKER® AK Fluids-HVFluid PDMS
None 100 1,000 – 600,000
WACKER® E35 /E60 Series
Emulsion PDMSWater 35 / 60 100 –1,000
GENIOPLAST®
Pellet SPellet Ultrahigh molecular weight PDMS gum
None 65 N/A
Phenyl functional AP 1000 Stab Fluid Phenyl PDMS None 100 1,000
Releaseagents
WACKER® E155 Fluid Proprietary None 100 225
Release Agent TN Fluid Proprietary None 100 900 – 1,500
Siliconeintermediates
SILRES® IC 232 Fluid Methyl phenyl polysiloxane (methoxy functional)
None 100 50 – 80
SILRES® SY 231 Fluid Methyl phenyl polysiloxane (methoxy functional)
None 100 120
Weatheringresistance
SILRES® HP 1250 Fluid Phenyl resin (glycidoxy functional) None 100 90 – 135
SILRES® HP 2000 Fluid Methyl phenyl resin (amino functional) Xylene 90 100 – 400
3
Applications
Product Name AntifoamAgent /Defoamer
ChemicalResis-tance
Coefficientof FrictionReducer
Gloss Lubricant Release Agent
Textile Softener or Fiber Treatment
Tempera-tureResistance
WaterRepel-lency
Weather Resistan-ce
WACKER® AF 21 • • •
WACKER® AF 23 • • •
WACKER® F756 • • • • • •
WACKER® F784 • • • • • • • •
SILFOAM® SE 11 • • •
SILFOAM® SE 20 • • •
SILFOAM® SE 21 • • •
SILFOAM® SE 23 • • •
SILFOAM® SE 33 • • •
SILFOAM® SE 24 • • •
SILFOAM® SE 2210 • • •
WACKER® SG 3381 • • • • •
SILRES® M97E • • • • • • • • • •
SILRES® MP 50E • • • • • •
SILRES® MSE 100 • • • • • • •
SILRES® REN 50 • • • • • •
SILRES® REN 80 • • • • • •
SILRES® 604 • • •
SILRES® MK Powder • • • • • • • • • •
WACKER® F1006 • • • • • • •
WACKER® AK FluidsLV
• • • • • • • • • • • • • • • • •
WACKER® AK FluidsHV
• • • • • • • • • • • • •
WACKER® E35 / E60 Series
• • • • • • • • • • • • •
GENIOPLAST®
Pellet S• • • • • •
AP 1000 Stab • • • • • • • • • • • •
WACKER® E155 • • • • • •
Release Agent TN • • • • • • • • •
SILRES® IC 232 • • • •
SILRES® SY 231 • • • •
SILRES® HP 1250 • • •
SILRES® HP 2000 • • •
• • • Highly recommended • • Recommended • Suitable
4 4
Benefits Markets
Advantages Auto-motive
Chemical Process-ing
Food & Bever-age
Industrial Coatings & Paints
Household, Industrial, Institutional
Oil & Gas
Pla-stics
Texti-les
Extremely soft hand & wrinkle recovery • • •
Softening agent for cotton with excellent slickness • • •
Detergent & corrosion resistant in polishes • • • • • •
Detergent resistance & good gloss for aqueous systems • • • • • •
Food & Kosher certified with excellent water dispersibility • • • • • • • • •
Food & Kosher certified with rapid foam knockdown • • • • • • • • •
Food grade suppressant for use in high shear applications • • • • • • • • •
Chemical & dilution stable for long-lasting foam control • • • • • • • • •
Food & Kosher certified for quick foam knockdown • • • • • • • • • • •
Alkali resistant with excellent water dispersibility • • • • • • • • • • •
Alkaline & high temperature stable • • • • • • • • • • • • •
Proppant processing additive for surfactancy & demulsification • • •
For medium-hard coatings, compatible with organics • • • •
Binder for heat resistant water-borne paints • • • •
Ambient temperature cure with high inorganic content • • •
Heat resistance up to 650 °C with medium hardness • • •
Heat resistance up to 650 °C & excellent corrosion protection • • •
Heat resistance up to 650 °C & color stable to 250 °C • • •
High reactivity with excellent thermal stability • • •
Very reactive for use in industrial processes • • • • • •
Antifoam for oil & gas, lubricant for plastic & rubber • • • • • • • • • • • • • •
Antifoam for oil & gas, temperature resistant • • • • • • • • • • • • • •
Water-based with good gloss • • • • • • • • •
Reduces extruder torque & improves surface properties • • • • • • •
Excellent temperature resistance • • •
Most releases per application, use with urethane • • •
Diecasting release, use when painting or bonding needed • • •
Intermediate in silicone polyester and acrylics • • •
Intermediate in silicone polyester, for coil coatings • • •
May react with amine curatives or acid-functional resins • • •
Hardener for epoxy resins or isocyanate high solids coatings • • •
5
WACKER SILICONES is one of the larg-est silicone manufacturers worldwide with over 3,000 highly specialized and innovative products. The division’s port-folio includes silicone fluids, emulsions and resins for a variety of applications.
FEATURESSilicones are extremely versatile chemicals that demonstrate a wide range of proper-ties. They are sold in various forms.• Fluids – silicone oil that are sometimes
functional and come in a wide range of viscosities
• Emulsions – silicone in a water based form
• Powders• Pellets
SILICONE SOLUTIONS – FLUIDS, EMULSIONS, RESINS
ADVANTAGESSome of the advantages of silicone are:• Low surface tension gives spreading for
defoamers• Resistant to extreme heat and cold• Chemically resistant• Provides gloss• Enhances electrical conductivity• Remarkable electrical insulating proper-
ties• Imparts water repellency• Environmentally and toxicologically safe• UV protection and corrosion resistance
on metal substrates
APPLICATIONSSilicones are used in many different appli-cations including:• Antifoam agents – quick foam knock-
down and long-lasting foam suppression• Chemical processing – lubricants and
diluents• High heat coatings – resins for tempera-
ture resistance• Oil & gas – defoamers, demulsifiers,
hydrophobizing agents, lubricants• Plastics – improved throughput and
surface properties• Polishes – gloss and water repellency• Release agents• Textiles – softeners• Coatings – UV protection and corrosion
resistance
66
1002
us/0
1.14
YOUR PARTNERS FORSHARED VALUES – SHARED SUCCESSWACKER offers you a local presence through our distribution partner BRENNTAG. You gain the knowledge of local experts, who are in turn supported by a global network. You will have the advantage of our unique experiences for your applications and markets.
Wacker Chemical Corporation has part-nered with BRENNTAG in our North and Middle America regions. BRENNTAG Group operates a global network with more than 450 locations in more than 70 coun-tries.
Through their extensive network of customer service centers, warehouses and technical support laboratories, BRENNTAG ensures accessible, responsible and timely delivery of WACKER’s silicone products. In addition, BRENNTAG's technical sales representatives offer complete, compre-hensive and consistent service to effective-ly and efficiently support your business.
For product, technical, or safety questions, please direct your inquiries to the BRENNTAG Solutions Group shown below.
BRENNTAG Companies
Brenntag North America United States
Brenntag Canada Canada
Brenntag Latin America Mexico, Central America, Caribbean, Colombia, Venezuela & Ecuador
WACKER's silicone product lines are represented as follows:
BRENNTAG Solutions Group: 888-9ASK-4BSG, [email protected]
www.brenntagnorthamerica.com www.brenntagla.com
The data presented in this information sheet are in accordance with the present state of our knowledge but we do not guarantee its accuracy, completeness or reliability. The information pre-sented does not and is not intended to absolve the user from carefully checking all supplies immediately on receipt and making its own determination as to the suitability of the product for pur-chaser's or user's use. We reserve the right to alter product constants within the scope of technical process or new developments. The recommendations made in this information sheet should be checked by preliminary trials because of conditions during processing over which we have no control, especially where other companies' raw materials are also being used. The information provided by us does not absolve the user from the obligation of investigating the possibility of infringement of third parties' rights and, if necessary, clarifying the position. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the product for a particular purpose.