Silens Pro Mega
description
Transcript of Silens Pro Mega
Silens-Pro Mega
Silens-Pro Mega
2
Rated load capacity: 1.300- 4.000Kg.Rated speed: 1m/sec or 1.6m/secEntrance configuration: Single, or double at 180º Control system: Altamira 2Lift car design: 220 Model Car & landing doors: From 1100 to 2100mm, according to modelMaximum travel: From 30 to 60m, according to model
Silens Pro Mega
Shopping centres
Hospitals Industry
Offices
Machine-roomless The Silens-Pro Mega®
is a lift with a rated load capacity of from 1300 to 4000Kg and a rated speed of 1 to 1.6 metres/second, which needs no machine room and so frees up available space and building design options.
The Silens-Pro Mega® is equipped as standard with the most up-to-date technology available: our precision car-to-landing levelling system*, a state-of-the-art control system, very hard-wearing lift cars – not to mention a wide range of optional extras to tailor each particular lift system to every project’s specific requirements.
Excellence supplied as standard
Exceptional ride comfortThe central suspension of the Silens-Pro Mega® car frame in combination with its Direct Approach System* delivers a supremely comfortable ride and optimum travel efficiency.
* Our car-to-landing Direct Approach System is available for systems of up to 1m/sec.
Gearless motors of the latest generationThe Silens-Pro Mega® is equipped with a powerful
and highly advanced permanent-magnet gearless drive system
which is environmentally-friendly, capable of handling loads of up to 4000Kg and characterised by its reliability, durability and high degree of energy efficiency.
33
Sturdier & lighterSilens-Pro Mega® lifts are extremely robust. The mechanical components are produced in a special high-strength steel, making them both light snd hard-wearing at the same time. This reduces the weight of the entire lift system, as well as significantly extending its useful life.
Maximumenergy efficiencyBuildings in the commercial sector are noted for their high operating costs and expensive energy bills. Silens-Pro Mega® lifts deliver major savings in a building’s energy consumption and financial costs.
Silens-Pro Mega® is a high-performance machine-roomless lift specially designed to handle heavy loads, such as in airports, shopping centres and hotels. Silens-Pro Mega® is a high-added-value solution for
sites with significant levels of passenger and goods traffic.
Lift carsbuilt to lastWe manufacture large-sized lift cars in a wide range of hard-wearing and longlas-ting materials, inclu-ding plastic laminates and stainless steel in a variety of finishes.
The sturdiness of our cars can be further boos-
ted by the installation of aluminium flooring, buffer rails,
kick plates and so on, acording to customer requirements.
Guaranteed quality for lift professionals
4
At IMEM, our almost fifty years’ experience of designing and manufacturing lifts makes us very aware of what lift professionals really need: lift systems which are competitive, reliable, easy to install and easy to maintain.
Installationeasy & straightforward
The Silens-Pro Mega® cuts installation time and saves money. Our installation procedure allows easy assembly of the lift system with greater access to the shaft throughout. We supply clear instructions, highly detailed packing lists and a range of product-specific assembly tools which make your work even more straightforward. The lift’s electrical components are supplied pre-tested and its connectors pre-assembled.
Technical supportfully comprehensive
Our team of engineers is dedicated to the systematic streamlining and effectiveness of your company’s operations. We provide detailed technical support, based on our wealth of practical experience, covering both the electrical and the mechanical aspects, from the start of installation works right through to maintenance operations.
Spare parts supplyfast and lifelong
The Silens-Pro Mega® is a lift system designed to be reliable and long-lasting. We guarantee you the efficient supply of spare parts as required, throughout its entire working life.
Easy to maintainand supremely reliable
The Silens-Pro Mega® is a high-performance lift system of proven reliability - making maintenance work a pleasure for any lift professional.
Silens-Pro Mega® compliance with standards
The lift system is supplied compliant with EN 81-1:2001 + A3:2010 and Directive 95/16/EC. On request, it can also be supplied compliant with EN 81-21:2009, EN 81-70:2003, EN 81-72:2003 & EN 81-71:2005 - among others.
Complete safetyfor passengers & staff
The Silens-Pro Mega® comes equipped with all the elements required to anticipate and prevent accidents, to enable two-way communication and to facilitate fast and efficient passenger release.
Ride comfortexceptional
The Silens-Pro Mega®’s Direct Approach System* is supplied as standard, providing passengers with a smooth and precise ride and delivering spot-on car-to-landing stopping accuracy.
Sustainability& energy-saving
Our Direct Approach System also reduces travel time compared to lifts unequipped with it. Both this feature and a major im-provement in the lift car braking system cut the system’s energy consumption.
Integrated designsolution
The entire Silens-Pro range has been de-signed, manufactured and tested from start to finish by IMEM Lifts - producing a highly competitive global solution of pro-ven quality & reliability.
5
A lift systemat the cutting edge
* Our car-to-landing Direct Approach System is available for systems of up to 1m/sec.
Lift car 220• Finishes available in plastic laminates in a choice of colours and stainless steel in a range of textures.• Lift car fronts in standard stainless steel.• Standard stainless steel upper and lower skirtings.• Stainless steel handrails, available in various formats.• Hardwearing floor finishes available in rubber, stainless steel, Polysafe and aluminium.• 1/2-width mirror, max. size 1400mm width x 1180mm height, or full-wall mirror (two-panel).• Lighting fluorescent or with LED spots.• Car ceiling and hatchway finishings in white or stainless steel skinplate.• Stainless steel car operating panel, in standard or half-column format.
Interior stylingLift car 220
PCEN
PCMTKPCENK PCSTK
PCIN PCEB PCMT
BEE1
BEE3 BEE4
BEE2
PEEN
PEEN PEEN
PEEN
PEIN
PEIN
DEEPV (3’’)
PEIN
PEIN
PEMT PEMT
* HLE0C fixed onto wall with built-in box & HLE0 fixed directly onto landing door lintel (fixings visible).
** HLE5: EN 81-70 compliant for cars with 50mm entrance return.
*** HLE6C fixed onto wall with built-in box & HLE6 fixed directly on to landing door frame (fixings visible).
DIS
PLAY
SIN
-CA
R P
USH
BU
TTO
NS
KEY
ED B
UTT
ON
S FO
R
SPEC
IAL
FUN
CTI
ON
SE
LEC
TIO
N
LAN
DIN
G S
IGN
ALI
SATI
ON
SE
MI-
FLU
SH M
OD
ULE
S
LAN
DIN
G B
UTT
ON
PA
NEL
S
HA
LF-C
OLU
MN
BU
TTO
N P
AN
EL: B
CE2
HLE1C
HLE4C
HLE0C/HLE0*
HLE3C
HLE6C/HLE6 ***
LAN
DIN
G S
IGN
ALI
SATI
ON
SU
RFA
CE-
MO
UN
TED
MO
DU
LES
HLE1 HLE3
HLE4HLE2
HLE2C
**HLE5
DCTFT (7’’)
DCEGH (5’’)
DCEPH (3’’)
STA
ND
AR
D B
UTT
ON
PA
NEL
: BC
CE
BU
TTO
N P
AN
EL: B
CE1
8
CEI
LIN
G L
IGH
TIN
G
WA
LL F
INIS
HES
SPOT LED
F-S
F-E
P270
Elephant Skin
P260
Linen finish
P222
P280
P412
P422
P432
EVA
CU
ATI
ON
H
ATC
HW
AYSTAINLESS STEEL
HA
ND
RA
ILS
PSI4 EN81-70
PSI3
PSI2 EN81-70
PSI1
PL-I PL_MSPL_PVC
BU
FFER
RA
ILS
FLO
OR
FIN
ISH
ES S45GN S42GB
S3AL
S52GN
S2_I S35_I
Stainless steel
1300-2000Kg at speeds of up to 1.6m/sec
RATEDLOAD(Kgs)
Nº OFPEOPLE
ROPINGRATIO
MAXRATEDSPEED(m/s)
ENTRANCESNº / ANGLE
CAR SIZE SHAFT SIZE(car
height 2200mm)
PITDOORTYPE
MAX DOOR WIDTHWIDTH DEPTH WIDTH DEPTH*
1350 18
2:1 1,6 m/s
1 / 0º
1200 2450
21002750
3600(1 m/s)
3850(1,6 m/s)
1300 (1 m/s)
1400 (1,6 m/s)
Telesc 2H PL1100
2 / 180º 2850 Telesc 2H PL1100
1 / 0º2450
2750 Central 2H PL1100
2 / 180º 2850 Central 2H PL1100
1500 20
1 / 0º
1300 2400
22002700 Telesc 2H PL1100
2 / 180º 2800 Telesc 2H PL1100
1 / 0º2450
2700 Central 2H PL1100
2 / 180º 2800 Central 2H PL1100
1600 21
1 / 0º
1400 2400
23002700 Telesc 2H PL1200
2 / 180º 2800 Telesc 2H PL1200
1 / 0º2450
2700 Central 2H PL1100
2 / 180º 2800 Central 2H PL1100
2000 26
1 / 0º
1500 2700
24003000 Telesc 2H PL1300
2 / 180º 3100 Telesc 2H PL1300
1 / 0º2450
3000 Central 2H PL1100
2 / 180º 3100 Central 2H PL1100
Operational ranges (standard system)Maximum travel Up to 60 metres
Shaft Pit Standard minimum: 1300mm (1m/s) 1400mm (1.6m/s) Headroom Standard min. (2200mm car): 3600mm (1m/s) 3850mm (1.6m/s) Reduced min. (2050mm car): 3450mm (1m/s) 3700mm (1.6m/s)
Car Minimum depth 1400mm Maximum depth 2700mm Minimum width 1200mm Maximum width 2500mm Standard height 2200mm (opción 2050mm y 2100mm)
Standard shaft & car dimensions * Dependent on door type and entrance return ** 3450mm reduced headroom option for lift speed = 1m/s and 3700mm option for lift speed = 1.6m/s with 2050mm car height.
9
Technicaldata
HEA
DR
OO
MPI
TTR
AVEL
HEADROOM**
CA
R H
EIG
HT
10
2100-2900Kg at speeds of up to 1.6m/sec
RATEDLOAD(Kgs)
Nº OFPEOPLE
ROPINGRATIO
MAXRATEDSPEED(m/s)
ENTRANCESNº / ANGLE
CAR SIZE SHAFT SIZE(car
height 2200mm)
PITDOORTYPE
MAX DOOR WIDTHWIDTH DEPTH WIDTH DEPTH*
2100 28
2:1 1,6 m/s
1 / 0º
1600 2500
25502800
3700(1 m/s)
3900(1,6 m/s)
1400 (1 m/s)
1500 (1,6 m/s)
Telesc 2H PL1400
2 / 180º 2900 Telesc 2H PL1400
1 / 0º3000
2800 Central 2H PL1400
2 / 180º 2900 Central 2H PL1400
2200 29
1 / 0º
1600 2600
25502900 Telesc 2H PL1400
2 / 180º 3000 Telesc 2H PL1400
1 / 0º3000
2900 Central 2H PL1400
2 / 180º 3000 Central 2H PL1400
2300 30
1 / 0º
1600 2800
25503100 Telesc 2H PL1400
2 / 180º 3200 Telesc 2H PL1400
1 / 0º3000
3100 Central 2H PL1400
2 / 180º 3200 Central 2H PL1400
2500 33
1 / 0º
1600 3000
25503300 Telesc 2H PL1400
2 / 180º 3400 Telesc 2H PL1400
1 / 0º3000
3300 Central 2H PL1400
2 / 180º 3400 Central 2H PL1400
2900 38
1 / 0º
1800 3000
27503300 Telesc 2H PL1500
2 / 180º 3400 Telesc 2H PL1500
1 / 0º3000
3300 Central 2H PL1400
2 / 180º 3400 Central 2H PL1400
Operational ranges (standard system)Maximum travel Up to 30 metres
Shaft Pit Standard minimum: 1400mm (1m/s) 1500mm (1.6m/s) Headroom Standard min. (2200mm car): 3700mm (1m/s) 3900mm (1.6m/s) Reduced min. (2050mm car): 3450mm (1m/s) 3700mm (1.6m/s)
Car Minimum depth 2000mm Maximum depth 3350mm Minimum width 1500mm Maximum width 2900mm Standard height 2200mm (2050mm & 2100mm options available)
Standard shaft & car dimensions * Dependent on door type and entrance return ** 3550mm reduced headroom option for lift speed = 1m/s and 3750mm option for lift speed = 1.6m/s with 2050mm car height.
HEADROOM**
HEA
DR
OO
MPI
TTR
AVEL
CA
R H
EIG
HT
3000-4000Kg at speeds of up to 1m/sec
RATEDLOAD(Kgs)
Nº OFPEOPLE
ROPINGRATIO
MAXRATEDSPEED(m/s)
ENTRANCESNº / ANGLE
CAR SIZE SHAFT SIZE(car
height 2200mm)
PITDOORTYPE
MAX DOOR WIDTHWIDTH DEPTH WIDTH DEPTH*
3000 40
4:1 1 m/s
1 / 0º 2000 2850 3250 3150
4200 1300
Central 4H PL1700
2 / 180º 2000 2800 3250 3200 Central 4H PL1700
1 / 0º 2200 2550 3450 2850 Central 4H PL1900
2 / 180º 2200 2500 3450 2900 Central 4H PL1900
3500 46
1 / 0º 2200 2950 3450 3250 Central 4H PL1900
2 / 180º 2200 2900 3450 3300 Central 4H PL1900
1 / 0º 2400 2700 3650 3000 Central 4H PL2000
2 / 180º 2400 2650 3650 3050 Central 4H PL2000
4000 53
1 / 0º 2200 3300 3450 3600 Central 4H PL1900
2 / 180º 2200 3250 3450 3650 Central 4H PL1900
1 / 0º 2500 2900 3750 3200 Central 4H PL2100
2 / 180º 2500 2850 3750 3250 Central 4H PL2100
Operational ranges (standard system)Maximum travel Up to 30 metres
Shaft Pit Standard minimum: 1300mm Headroom Standard min. (2200mm car): 4200mm Car Minimum depth 2600mm Maximum depth 4000mm Minimum width 1600mm Maximum width 3000mm Standard height 2200mm
Standard shaft & car dimensions * Dependent on door type and entrance return
11
HEADROOM
HEA
DR
OO
MPI
TTR
AVEL
CA
R H
EIG
HT
May-13
All the information contained in this catalogue is the property of IMEM Lifts. The partial or total reproduction of its contents without the prior written authorisation of IMEM is strictly forbidden. The distribution or copying of photographs, logos or any other graphic material contained herein is strictly forbidden, IMEM Lifts being the acknowledged sole proprietor of all intellectual property rights pertaining.
IMEM Lifts reserves the right to modify the specifications, options and colours presented in this catalogue. All the illustrations shown have a purely indicative character. The colours and materials of the delivered products may differ slightly from those in the catalogue.
Wardrobe
C/ Adarzo 167-B. 39011 Peñacastillo Santander, Spain
Tel: (00 34) 942 34 60 20Fax: (00 34) 942 35 53 64
EXPORT DEPARTMENT