Sika Wet Precast More than Admixtures ® Sealing as ... up security system at waterstop with:
Transcript of Sika Wet Precast More than Admixtures ® Sealing as ... up security system at waterstop with:
Sika® Wet PrecastMore than Admixtures
2 3
Concrete Production1
Concrete Production1
Surface Appearance2 Protection 4
Bonding 6
Repair 3
Anchoring 7
Anchoring 7
Anchoring 7
Sealing 5
Sealing 5
Grouting 8
Grouting 8
Bonding 6
Repair 3
Repair 3
Bonding 6
Protection 4
9
Grouting 8
Bonding 6
Basement Waterproofing
4 5
Swift concrete production with ensured concrete performance Aesthetic surface appearance with Sika
Concrete Production Surface Appearance 1 2
Are you looking for a high initial workability in combination with a target slump life?
Do you want to produce self-compacting concrete?
Do you need fast early strength development without any accelerator?
Do you want to boost early strength development with an accelerator system?
Workability improvement
High early strength development
Extended durability
Special aesthetical requirements
Do you intend to achieve highest concrete durability?
Do you want to fulfill special durability requirements?
Do you want to produce colored concrete precast elements?
Do you want to produce concrete with reduced blow hole risk?
�High range water reduction combined with required workability time: Sika® ViscoCrete®
�Secured production of self-compacting concrete even in the presence of difficult raw materials: Sika® ViscoCrete® Sika® Stabilizer®
�Highest water reduction leading to fast early strength development: Sika® ViscoCrete®-20 HE / -30 HE
�Effective acceleration: SikaRapid®-1 (hardening accelerator) for reduced / eliminated heat / steam curing SikaRapid®-2 (set accelerator) for ensured early green strength
�Extended longevity of concrete with highest concrete impermeability: Sika® ViscoCrete® + SikaFume®
�Durability enhancement with regard to shrinkage crack reduction, fire resistance or impact resistance: SikaFiber®
�Efficient production of colored concrete with different kind of dosing systems: Sika® ColorFlo®
�Surface improving admixture with no side effect on other concrete parameters: Sika® PerFin®
Do you need a certain technology?
Do you have special requirements regarding Ecology, Health and Safety?
Do you want to produce with surface application?
Do you need a surface retarder for mold application?
Production of exposed aggregate concrete
Aesthetical coating
Improved finishing of concrete surfaces
Do you want to use a colored coating system for non accessible elements?
Do you want to produce non accessible fair-faced concrete elements with a brilliant appearance?
Do you want to improve the finishing of concrete surfaces?
Mold release agent
�Full oil based standard mold release agent: Sika® Separol® F
�Solvent based mold release agent: Sika® Separol® S
�Environmentally friendly water based emulsion mold release agent leading to best surface appearance: Sika® Separol® W
�Efficient production of exposed aggregate surfaces: Sika® Rugasol® liquid
�Surface retardation applied on the formwork: Sika® Rugasol® paste
�Easy and fast finishing of concrete surfaces: SikaFilm®
�Improved concrete stickiness leading to fast and easy finishing: Sika® ViscoCrete®
�Aesthetic colored coating with protection against aggressive atmospheric influences: Sikagard®-680 S BetonColor
�Transparent glaze for protection against weathering: Sikagard®-674 Lasur W
6 7
Fast and easy repair with extended longevity Extended service life and aesthetic surface appearance
Repair Protection 3 4
What kind of crack do you want to repair?Small, non-structural, < 2 mm width?
Structural crack, > 2 mm width?
Do you have aesthetic issues (color, finish, etc.)?
Do you need an epoxy based mortar?
Repair of cracks
Repair of broken edges
Refurbishment of honey combs and pore filling
Repair of structural concrete spallings
Do you have any aesthetic requirements?
Do you have a layer thickness < 50 mm?
�Refurbishment of small cracks (< 2 mm): Sikadur® injection resin
�Repair of large cracks (> 2 mm): Sika® MonoTop® (cemetitious repair) Sikadur®-31 CF (epoxy repair)
�Repair of broken edges: Sika® MonoTop® repair mortars
�Solution to achieve a fine texture: SikaRefit® fine mortars
�Epoxy based repair mortar: Sikadur®-41 CF (epoxy mortar)
�Repair with high aesthetic appearance (fine texture): SikaRefit®-2000
�High quality repair with no special aesthetic requirments: Sika® MonoTop®-723 N (pore sealer)
Sika® MonoTop®-412 N (repair mortar)
�Safe repair of structural concrete decays with a thickness layer smaller than 50 mm: Sika® MonoTop®-412 N (repair mortar) Sikadur®-41 CF (epoxy mortar)
Do you have any technical requirements (freeze/thaw resistance, penetration depth, etc.)?
Do you expect a risk of further cracks on the concrete surface (< 0.5 mm)?
Do you expect a risk of slight mechanical attack?
Protection systems against weathering
Protection system against chemicals
Concrete curing
What kind of chemical exposure to you expect?
Do you want to apply a coating subsequently?
Protection of fair faced concrete elements
� High performance hydrophobic impregnation: Sikagard®-706 Thixo Sikagard®-705 L
�Standard hydrophobic impregnation solution: Sikagard®-705 S
�Elastic protection system suitable for crack-bridging: Sikagard®-545 W Elastofill Sikagard®-550 W Elastic
�Rigid protection system for slight mechanical loading: Sikagard®-704 S
Sikagard®-680 S BetonColor
�Secured protection against high chemical attack with epoxy coatings: Sikagard®-63 N
Sikafloor®-390 Thixo�Protection against medium attack for tubbing
segments: Sikafloor®-155 W
�Efficient concrete curing on which organic based coating can be applied without substrate preparation: Sikafloor® ProSeal W
�Curing with high water retaining action (substrate preparation required): Antisol® MP-10
8 9
What kind of joint do you want to seal – connection joint?Expected movement?Kind of substrate?
�Sealing of connection joints (non-porous substrate)�25% movement capacity with High E-Modulus (HM)�Highly UV stable, solvent and NCO free Sikaflex® AT Connection Advanced Technology�Sealing of connection joints (porous substrate)�PU Technology with High E-Modulus (HM) Sikaflex® Construction
Durable connection with fast and easy sealing Efficient erection and durable bonding
Sealing Bonding 5 6
What kind of joint do you want to seal-movement joint?Expected movement between concrete and concrete?
Sealing of movement joints
Sealing of connection joints
Sealing in different climatic conditions
Special application
What are the application circumstances?Ambient conditions – hot or cold? What is the required movement capability?
Joint for construction of sewage treatment plants?Sealing of joints in contact with potable water?Sealing of joints in car parks and industrial floors?
�In areas with varying temperatures from -20 to 60 °C high movements are expected; a sealant with a low modulus, even in colder areas is needed. Sikaflex® AT Façade
Sikaflex® PRO 2 HP�Sealing in hot ambient conditions Sikaflex® Construction
Bonding to which kind of substrate?
Do you need to transmit high forces (compressive, tensile, shear)?
How do you install the gasket in the connecting sleeve? Bonding or installation in concrete?
Bonding of gasket
Bonding with special application
Big applications
Do you have bonding of concrete elements in contact with drinking water?
How big is the application – do you need special equipment for efficient application?
Bonding of concrete elements
� Bonding to different substrates: Sikadur®-31 CF Sikadur®-30
�Bonding with transmission of high forces: Sikadur®-30 Sikadur®-31 SBA
�Highly durable, easy to install bonding of rubber gasket in connecting sleeve: Sikaflex®
�Bonding of concrete elements with drinking water contact: Sikadur®-31 DW (with drinking water approvals)
�Special application equipment for big adhesive applications: Sikadur®-33 with Comix
�Sealing of movement joints�25% movement capacity with Low E-Modulus (LM)�Highly UV and color stability, solvent and NCO free Sikaflex® AT Façade�Sealing of movement joints�Excellent tear resistance with Low E-Modulus (LM) Sikaflex® PRO 2 HP
�High mechanical and chemical resistance�25% movement capacity with High E-Modulus (HM)�Good adhesion to different substrates �Excellent tear resistance�Conforms to ISO 11600 F 25 HM�ISEGA Certificate for foodstuff area usage Sikaflex® PRO 3 WF
10 11
Fast, easy and safe anchoring Grouting solutions for different technical challenges
Anchoring Grouting 7 8
Is this a regulated or non regulated application?
Do you have special needs regarding the curing due to early loading or changing ambient conditions?
Installation of anchors after element production
Early loading
Anchoring solution where mechanical anchors do not work
Special substrates
Installation of anchors within a small concrete layer?
Installation of Anchors in special substrates such as light weight concrete etc.?
�Anchoring for non regulated applications: AnchorFix®-1
�Post fixing of anchors for regulated applications: AnchorFix®-2 AnchorFix®-3+
�Anchoring with shorter pot life for early loading and cold ambient conditions: AnchorFix®-1 / AnchorFix®-2
�Application in hot climate conditions: AnchorFix®-3+ with extended pot life
�Use of bonded anchors instead of mechanical anchors: AnchorFix®-1 / AnchorFix®-2 AnchorFix®-3+
�Application in critical substrates (in terms of staining): AnchorFix®-3+ (epoxy)
Do you need a cementitious based grout?
Do you have special requirements regarding early loading?
Do you have special requirements regarding dynamic loading?
Load requirements
Temperature requirements
Special requirements
Do you do grouting at low temperatures?
Do you expect excessive service temperatures?
Do you need material for grouting with good bond strength to steel?
Do you need grout which is exposed to chemicals?
Grouting of post tensioned prestressing tendons
�Filling of post tensioning ducts with cementitious grout: SikaGrout®-300 PT
�Grouting with subsequently early applied loads: Sikadur®-42
�Grouting of parts exposed to dynamic loads: Sikadur®-42
�Grouting at ambient temperatures below + 5 °C: Sikadur®-12 Pronto
�Grout resisting service temperatures above 60 °C: SikaGrout®-311 / -314 / -318
�Grouting with good bond strength to steel: Sikadur®-42
�Grouting of parts exposed to chemicals: Sikadur®-42
© S
ika
Serv
ices
AG
/ BU
Conc
rete
/ W
et P
reca
st F
ull R
nge
Supp
ort /
CM
S / g
ho /
01.2
011
Sika Services AG | Business Unit Concrete | Tüffenwies 16 | CH-8048 Zürich Switzerland
Phone +41 58 436 40 40 | Fax +41 58 436 41 50 | www.sika.com
Durable structural waterproofing of precast constructions
Basement Waterproofing 9
Do you want to produce a waterproof vapor proof basement?
Do you want to produce a watertight concrete structure with joint sealing?
Basement with outside sealing
Watertight concrete structure
Watertight concrete structure
Injection systems
Do you want to produce a watertight concrete structure from outside?
Do you want to seal leakages on site?
�Surface sealing from outside with direct bond between concrete and membrane: SikaProof ®
�Surface sealing from outside with a compartmental waterstopping system Sikaplan® sheet membrane and Sika® Waterbar
�Sealing as watertight concrete system: Sika® ViscoCrete® and Sika®-1
�Joint sealing: Sika® Waterbar Tricosal® Tricomer® / Elastomer SikaSwell®
�Sealing as watertight concrete system: Sika® ViscoCrete® and Sika®-1
�Joint sealing: Sikadur-Combiflex® SG Sika® Dilatec®
�Fast and safe injection of cracks on site: Sika®-Injection System
�Fast and safe injection of construction joints or back up security system at waterstop with: SikaFuko®