SIEMENS KNX System Components - · PDF fileThe data contained herein are subject to change...

© Opternus Components GmbH, February 2016 KNX System Components System Components TP-UART2/2+ the next generation KNX transceivers • Compatible with its predecessor • Enhanced features, 3,3V or 5V power supply • 50mA • TP-UART2+ with 115.2kBaud hostcontroller interface at 3,3V or 5V and 25mA at 20V KNX microcontrollers, SIEMENS the NEC 78F series already contain the KNX BCU 2.5 system software. In combination with the TP-UART, it is the ideal chipset for fast development of KNX applications. • Package: 64-PIN-TQFP 7x7 mm BIM M13x series, consists of the chipsets (TP-UART + KNX microcontroller) mounted with all necessary components. • Contains the BCU 2.5 system • BIM M130 8K Flash • BIM M131 16K Flash • BIM M132 48K Flash OEM Devices available in neutral or customized version • Power supplies • Line couplers • Actuators for lighting and shading control • Occupancy sensors • DALI gateways • USB interfaces • IP routers/IP gateways • Thermostats and more Transceivers BIM Modules KNX System Stack OEM Devices

Upload
nguyenthuy
Category

Documents
view
217
download
2

Embed Size (px):

Transcript of SIEMENS KNX System Components - · PDF fileThe data contained herein are subject to change...

X S

yste

m C

ompo

nent

System Components

TP-UART2/2+ the next generation KNX transceivers• Compatible with its predecessor• Enhanced features, 3,3V or 5V power supply• 50mA• TP-UART2+ with 115.2kBaud hostcontroller interface

at 3,3V or 5V and 25mA at 20V

KNX microcontrollers,

SIEMENS

theNEC78FseriesalreadycontaintheKNXBCU2.5systemsoftware.IncombinationwiththeTP-UART,itistheidealchipsetforfastdevelopmentofKNXapplications.•Package:64-PIN-TQFP7x7mm

BIM M13x series,consistsofthechipsets(TP-UART+KNXmicrocontroller)mountedwithallnecessarycomponents.•ContainstheBCU2.5system•BIMM1308KFlash•BIMM13116KFlash•BIMM13248KFlash

OEM Devicesavailableinneutralorcustomizedversion•Powersupplies•Linecouplers•Actuatorsforlightingandshadingcontrol•Occupancysensors•DALIgateways•USBinterfaces• IProuters/IPgateways•Thermostatsandmore

Transceivers

BIM Modules

KNX System Stack

OEM Devices

Page 2: SIEMENS KNX System Components - · PDF fileThe data contained herein are subject to change without notice. Opternus does not warent for correctness or completeness of this document

The data contained herein are subject to change without notice. Opternus does not warent for correctness or completeness of this document

Opternus Components GmbH, Bahnhofstr. 5, D-22941 BargteheideTel: +49 4532 2044 0, Fax+49 4532 2044 25

[email protected] - online shop: www.opternus.com

KNX Development Tool PackageThe development tool package contains everything needed to write an applica-tion program: the evaluation board, the Renesas E1 microcomputer develop-ment system and the BIM Tools soft-ware. A size limited version of the IAR embedded workbench is available at www.renesas.eu free of charge.

€ 398,-plus VAT

KNX Starter KitFor commissioning and testing we offer a KNX hardware environment consisting of a power supply, an Interface (alternatively RS232, USB or IP), a push button sensor and a 230V/2x10A actor. Furthermore 2 meters of KNX cable and the corresponding product database. Optional is the Tool Software ETS-Light available. The ETS- Light version is limited to a max. of 20 devices per project.

€ 299,-plus VAT

System Components

X T

ools

and

Pac

kage

TP-UART2 Test boardTP-UART2 only Normal mode5V supply selectedV20 availableAll host interface signals available

€ 35,80plus VAT

TP-UART2/2+ Evaluation board TP-UART 2 and TP-UART 2+ versionsEvaluation board with adjustable para-meter

€ 148,- / € 198,-plus VAT