The first thing that I did was made the head, for the head I just used a box with a lot of segments in them and moved them around so that I clould get it to the right shape.

After I made the head I made the eyes, the eyes I wanted them to look like LED blubs sticking out. After I had the eyes done I began to do the neck, for the neck I made it so it moved using pistons and so it had a full degree of rotation.

After I had the head done I started on the body, the body was pretty basic but was a good base to build on, after I had the body done I started on the arm, the arm was quite difficult to make it how I wanted it to look, I made the shoulders socket look like it had plates so it could move all the way around it.

The hands I made pretty basic, they are goood enough so that they can do a lot of stuff such as pick things up and so on.

After the arms where done I started to build on the body, the first thing I did was make the flux capacitor, it was pretty difficult to make because of all the bends in the pipes but I only needed one of them to make it.

After I almost had everything done I started top work on the hover ball which is how it moves around, original I wanted to make it go from a square in to a circle at the end but was unable to do that, so what I ended up doing was make the hover ball and connect it to the square.

I then began to decorate the sidekick so that it would look a bit better. The first bit of decoration was a bit on top of it, it was pretty easy to make and didn't take long but came out very good.

After having a look around I thought the back of it look very blank so I decide to put a tank on the back of it help in with straps, I thing that the tank came out very well and makes a very good bit of decoration for the back.

After completing the model I then went through and added surfaces to each bit I wanted textures on them.