SICOMIN Catalog

2010 3

Edition June 2010

Listing

Epoxy systems…for laminating 5 - 6for R.T.M. processes 7for "in house" prepreg 8for translucent laminates 8for impregnation of porous materials 8fire retardant 9for bonding 9for water and fish tanks 10for flexible laminating 10for fuel tank 11for wood 11for solvent free coating 11for foaming 160 to 600 kg/m3 12accelerator 13for casting 13for filling & fairing 14for under water application / wet substrate 15for gelcoating 15GreenEpoxy 16

Multiaxial reinforcementsE glass 17Carbon 18Aramid / E glass 18

FabricsFelts 19Carded for mould making 19Glass 19Aramid 19Carbon 19Carbon / Aramid 19Polyester 19Texalium / Colortex 19PTFE 26

Roving, roving matGlass 19

Tubular braid, Braid, tapesGlass, carbon 21

Unidirectionnal reinforcementsWoven E glass 20Carbon woven with E glass 20Carbon 20

MiscellaneousProducts for vacuum 22Products for infusion 23Accessories for vacuum or infusion 24Release agents 25 - 26Stiffeners OMEGA System 27Epoxy dispensing machine 32Soft coating 33Fillers 28 - 29Hand tools & accessories 30 - 31Accessories for kite board manufacturing 31

Core MaterialsSoft extruded polyethylene foam 35 kg/m3 27SPHERETEX : Fabrics for micro and macro sandwichs 20AIREX C51.60 : PU foam 36BALTEK : Balsa 34 - 35C71 ET : PVC foam 36AIREX : Linear P.V.C foam 37AIREX : Cross linked P.V.C foam 38AIREX : Microperforated Cross linked P.V.C foam 39AIREX : PET Foam 40AIREX : Foam fire resistant M1F1 41

Contents

Laminating epoxy systems

Resin HardenerQuantity Quantity Quantity

SR 1270 in Kg in Kg in KgSD 4990, SD 4999 (100 / 35 Weight) 363,80 1 x 200 7 x 23,4Laminating and curing at ambient temperatureSlow & Fast hardeners are mixable for adjustable working time.

SR 1500 266,00 1 x 200 6 x 11SD 2503 / 2505 / 2507 (100/33 Weight) 44,33 1 x 33,33 1 x 11Slow and standard hardeners for 16,00 1 x 12 1 x 4laminating and curing 4,39 1 x 3,3 1 x 1,09at room temperature. Tg 75°C 1,33 1 x 1 1 x 0,33

SR 1500 260,00 1 x 200 6 x 10SD 7561 (100/33) 44,33 1 x 33,33 10+1Long working time. Tg 92°C 15,60 1 x 12 1 x 3,6

4,30 1 x 3,3 1 x 11,38 1 x 1 1 x 0,38

SR 1620 238,00 1 x 200 4 x 9,5SD 2625, SD 2706 (100/19 Weight) 39,27 1 x 33 1 x 6,27Standard and fast hardener 11,90 1 x 10 1 x 1,9High wet out, high tack. Tg 90-97°C 4,40 1 x 3,7 1 x 0,7

1,19 1 x 1 1 x 0,19

SR 1700 268,50 1 x 220 5 x 9,7SD 2705 / 2706 (100/22 Weight) 42,70 1 x 33 1 x 9,7High modulus. Fast hardeners 13,42 1 x 11 1 x 2,42Highest mechanical properties 6,71 1 x 5,5 1 x 1,21of our range. Tg 103-109°C 1,22 1 x 1 1 x 0,22

SR 1700 305,80 1 x 220 3 x 28,6SD 2801 / 2803 / 2805 / 2806 (100/39 Weight) 45,90 1 x 33 3 x 4,3High modulus. Highest mechanical properties 15,30 1 x 11 1 x 4,3Slow and standard hardeners for 7,70 1 x 5,5 1 x 2,2laminating and curing. Tg 89-101°C 1,40 1 x 1 1 x 0,4

SR 1700 SD 7820 (100/36 Weight) 299,20 1 x 220 8 x 9,9Long working time, tooling 120°C 42,90 1 x 33 1 x 9,9Tg 140 °C 15,00 1 x 11 2 x 2

7,50 1 x 5,5 1 x 21,36 1 x 1 1 x 0,36

SR 1660 SD 1305 (100/32 Weight) Ultra slow 39,90 1 x 30 1 x 9,9Prepreg and thermoforming. Low exotherm. Tg 165°C

SD 2630 (100/31 Weight) Ultra slow 275,10 1 x 210 7 x 9,3For laminating or casting tooling, 39,30 1 x 30 1 x 9,3prepreg and thermoforming 13,10 1 x 10 1 x 3,1Low exotherm. Tg 150 °C 4,59 1 x 3,5 1 x 1,09

1,31 1 x 1 1 x 0,31

SD 7820 (100/32 Weight) Slow 279,30 1 x 210 7 x 9,9Prepreg and thermoforming 39,90 1 x 30 1 x 9,9Low exotherm. Tg 150°C 13,20 1 x 10 1 x 3,2

4,62 1 x 3,5 1 x 1,12

Detail of the kit

(Resin + Hardener)

Page 5

Laminating epoxy systems


in Kg in Kg in KgSR 8200 274,00 1 x 200 8 x 9,25SD 7201 / 7203 / 7204 / 7206 (100/37 Weight) 45,60 1 x 33,3 3 x 4,1Tg 92-94°C 16,40 1 x 12 2 x 2,2Mixable hardeners 8,20 1 x 6 1 x 2,2

1,37 1 x 1 1 x 0,37

SR 8200 261,98 1 x 200 6 x 10,33SD 8202 / 8203 / 8205 / 8206 (100/31 Weight) 43,63 1 x 33,3 1 x 10,33General working conditions, low toxicity, 15,72 1 x 12 2 x 1,86Hardeners mixable 7,86 1 x 6 1 x 1,86

2,31 2 x 1 1 x 0,31

SR 8200 TH 1 274,00 1 x 200 8 x 9,25SD7201 / 7203 / 7204 / 7206 (100/37 Weight) 28,20 1 x 20 2 x 4,1Thixotropic version of SR 8200for vertical substrate verticale. Tg 92-94°C

SR 8500General working conditions from 20°Cand warmer temperatures, low toxicity 2 hardeners(ultra slow and ultra fast which can be mixed)

SD 8601 Ultra slow (100/35 Weight) Tg 87°C 270,00 1 x 200 7 x 10

38,60 1 x 28,6 1 x 1016,20 1 x 12 2 x 2,14,05 1 x 3 1 x 1,051,35 1 x 1 1 x 0,35

SD 8603 Slow (100/35 Weight) Tg 88°C 270,00 1 x 200 7 x 10( 50 % SD 8601 and 50% SD 8605)

SD 8605 270,00 1 x 200 7 x 10Ultra fast (100/35 Weight) Tg 91°C 38,60 1 x 28,6 1 x 10Mixable with SD 8601 16,20 1 x 12 2 x 2,1

4,05 1 x 3 1 x 1,051,35 1 x 1 1 x 0,35

SR 8500 261,98 1 x 200 6 x 10,33SD 8202 or SD 8203 (100/31 Weight) 38,93 1 x 28,6 1 x 10,33Excellent cost / thermal performance ratio 15,72 1 x 12 2 x 1,86Tg 120-123°C 3,93 1 x 3 1 x 0,93

1,31 1 x 1 1 x 0,31

SR 8500 TH 2 270,00 1 x 200 7 x 10SD8601 Ultra slow (100/37,5 Weight) Tg 87°C 38,60 1 x 28,6 1 x 10Thixotropic version of SR 8500for vertical substrate verticale.

SD 8605 270,00 1 x 200 7 x 10Ultra fast (100/35 Weight) Tg 91°C 38,60 1 x 28,6 1 x 10Mixable with SD 8601

Detail of the kit(Resin + Hardener)

Page 6

SR 1710 Injection 302,40 1 x 224 8 x 9,8SD 8822 (100/35 Weight) Slow hardener 37,80 1 x 28 1 x 9,8High modulus, high mechanical 16,20 1 x 12 1 x 4,2 properties. Low viscosity. 6,75 1 x 5 1 x 1,75Tg 101°C 2,70 1 x 2 1 x 0,7

SR 1710 Injection 275,52 1 x 224 8 x 6,44SD 8824 (100/23 Weight) 34,44 1 x 28 1 x 6,44Standard hardener 14,76 1 x 12 1 x 2,76Low viscosity 6,15 1 x 5 1 x 1,15Tg 96°C 2,46 1 x 2 1 x 0,46

SR 1710 Injection 303,20 1 x 224 8 x 9,9SD 7820 (100/36 Weight) 38,00 1 x 28 1 x 10Infusion system for part or mould. Tg 130°C 16,32 1 x 12 1 x 4,32

6,75 1 x 5 1 x 1,752,72 1 x 2 2 x 0,36

SR 1710 Injection 292,00 1 x 224 8 x 8,5SD 8731 (100/29 Poids) Slow hardener. 36,50 1 x 28 1 x 8,5Mixable with SD 8734 14,24 1 x 11 1 x 3,24Low viscosity. Tg 100°C 6,51 1 x 5 1 x 1,51

2,60 1 x 2 1 x 0,6

SR 1710 Injection 292,00 1 x 224 8 x 8,5SD 8734 (100/29 Poids) Standard hardener. 36,50 1 x 28 1 x 8,5Mixable with SD 8731 14,24 1 x 11 1 x 3,24Low viscosity. Tg 99°C 6,51 1 x 5 1 x 1,51

2,60 1 x 2 1 x 0,6

SR 8100 258,80 1 x 200 6 x 9,8Excellent cost/performance ratio 41,30 1 x 31,5 1 x 9,8SD 8822 (100/31 Weight) 15,70 1 x 12 1 x 3,7Slow hardener 7,35 1 x 5,6 1 x 1,75Low viscosity. Tg 90°C 2,90 1 x 2,2 1 x 0,7

SR 8100 244,00 1 x 200 2 x 22SD 8824 (100/22 Weight) 38,43 1 x 31,5 1 x 6,93Standard hardener 14,64 1 x 12 1 x 2,64Low viscosity. Tg 81°C 6,83 1 x 5,6 1 x 1,23

2,69 1 x 2,2 1 x 0,49

SR 8100 254,00 1 x 200 2 x 27SD 8731 (100/22 Weight or 3/1 Volum) 40,00 1 x 31,5 1 x 8,5Slow hardener, mixable with SD 8734 15,24 1 x 12 1 x 3,24Low viscosity. Tg 88°C 7,11 1 x 5,6 1 x 1,51

2,80 1 x 2,2 1 x 0,6

SR 8100 254,00 1 x 200 2 x 27SD 8734 (100/22 Weight or 3/1 Volum) 40,00 1 x 31,5 1 x 8,5Fast hardener, mixable with SD 8731 15,24 1 x 12 1 x 3,24Low viscosity. Tg 90°C 7,11 1 x 5,6 1 x 1,51

2,80 1 x 2,2 1 x 0,6

SR 1720 / SD 7840 280,00 1 x 220 8 x 7,5(100/26 Weight or 100/32 Volum) 36,50 1 x 29 1 x 7,5Infusion, tooling. Tg 200°C 13,86 1 x 11 1 x 2,86

1,26 1 x 1 1 x 0,26

Epoxy systems for R.T.M., Infusion processes

Page 7

Epoxy systems for hot processes

Resin Hardener

Quantity Quantity Quantityin Kg in Kg in Kg

SR 8500 / SZ 8525 (100/25 Weight) 250,00 1 x 200 2 x 25Clear system for industrial scale production 35,75 1 x 28,6 1 x 7,15as skis or leisure items. Tg 114°C 15,00 1 x 12 1 x 3Typical cycle time: 10min at 100°C 7,50 1 x 6 1 x 1,5

SIPREG :Epoxy systems for "in house" prepregsSR 121 / KTA 21 (100/21 Weight) 242,00 1 x 200 2 x 21Cure starting at 90°C 36,32 1 x 30 2 x 3,16

SR 1258Epoxy mono composing. Cure starting at 100°C 3,00 1 x 3Colorless after hardening. Storage in the cold.Life cycle limited to ambient temperature.


in Kg in Kg in KgSR GLASS ONE Standard clear epoxy system. Tg 78°C 350,00 1 x 250 10 x 10SD Glass One (100/39 Weight or 2/1 Vol.) 35,60 1 x 25,6 1 x 10or 5,00 1 x 3,6 1 x 1,4SD 7561, slow hardener 5 x 1 5 x 0,72 5 x 0,28

1,00 1 x 0,72 1 x 0,28

SURF CLEAR (100/38 Weight or 2/1 Vol.) High mechanical performance. Clear epoxy system 323,00 1 x 233 9 x 10SD SC, Fast hardener Tg 84°C 36,00 1 x 26 1 x 10or 5,00 1 x 3,6 1 x 1,4SD 7561, slow hardener Tg 91°C 5 x 1 5 x 0,72 5 x 0,28

1,00 1 x 0,72 1 x 0,28


SR 5311 in Kg in Kg in KgSD 1010.1 (100/28,5 Weight or 3/1 Vol) 38,55 1 x 30 1 x 8,55Standard hardener 1,30 1 x 1 1 x 0,3Mix viscosity below 100 cPs at 25°C

Impregnation epoxy systems ( cracks in marble, stone or wood attacked by insects)

(Resin + Hardener)


Clear epoxy systems for sailboards, surfs, models…

(Resin + Hardener)

Detail of the kit

Detail of the kit

Page 8

Fire resistant epoxy systems SR 1500 i Laminates M1 approved, Self extinguishing 70,00 2 x 30 1 x 10SD 2505 (100/17 Weight), Tg 76°C 35,00 1 x 30 1 x 5Tg 76°C 7,09 1 x 6 1 x 1,09

SR 1126 FAR 25 Approved, Self extinguishing 36,00 1 x 30 1 x 6Laminates UL94 / V0 approved. New generation of fire 5,58 1 x 4,65 1 x 0,93retardant system. Intumescent, halogen free. Tg 90°C 0,90 1 x 0,75 1 x 0,15SD 8203 (100/20 Weight)

PB270i with DM02 24,90 1 x 19,5 3 x 1,8(100/28 Weight) Hardener for thick section 6,80 1 x 5 1 x 1,8

PB270i with DM03 24,15 1 x 19,5 3 x 1,55(100/22 Weight) Hardener for thin section 6,55 1 x 5 1 x 1,55

PB370i with DM02 32,20 1 x 25 4 x 1,8(100/26 Weight) Hardener for thick section 6,80 1 x 5 1 x 1,8


Fire resistance certificationsHomologation FAR 25-853 (a)

Smoke certification Standards AIRBUS, NBS smoke chamber Standards BOEING, NBS smoke chamberABD 031 document, issue F BOEING D6-51377 documentMethod : AITM 2.0007 Method / BSS 7238

Smoke toxicity certification Certification AIRBUS Certification BOEINGABD 031 document, issue F BOEING document D6-51377Method : AITM 3.0005 Method / BSS 7239

Epoxy bonding pastes


in Kg in Kg in KgSR 5700 / SD 5703 7,20 1 x 5 1 x 2,2

1,44 1 x 1 1 x 0,440,72 1 x 0,5 1 x 0,22

Composites, alloys, plastics (100/44 Weight or 2/1 Volume)

Aerobond SR 7300 / SD 7303 (100/40 Weight) 7,00 1 x 5 2 x 1Aluminium, laminates, steel & wood 1,40 1 x 1 1 x 0,4structural bonding

SR 3-10 / SD 10' Unfilled 10 minutes bonding paste (1/1 Weight or Volume) 4,00 1 x 2 1 x 2

1,00 1 x 0,5 1 x 0,5SR 5600 Ratio in volume 1 / 1 Good adhesion on wet surface See page 11

FAR 25 approval.

(Resin + Hardener)Detail of the kit

Structural thixotrop bonding for superior adhesionOffers possibility to glue most of the material

SR 1126 / SD 8203

Page 9

SR 1170 WHITE / SD 4072 WOOD (slow) 30,00 1 x 20 2 x 5(2/1 by Weight or Volume) Final color Wood 6,00 1 x 4 2 x 1Filled epoxy system for fillet-joint and bonding 1,50 1 x 1 1 x 0,5For wooden structures

SR 1170 WHITE / SD 4075 WOOD (fast) 30,00 1 x 20 2 x 5(2/1 by Weight or Volume) Final color Wood 6,00 1 x 4 2 x 1Filled epoxy system for fillet-joint and bonding 1,50 1 x 1 1 x 0,5For wooden structures

SR 1170 WHITE / SD 2052 BLACK (slow) 30,00 1 x 20 2 x 5(2/1 by Weight or Volume) Final color Grey 6,00 1 x 4 2 x 1Filled epoxy system for fillet-joint and bonding 1,50 1 x 1 1 x 0,5For composites structures

SR 1170 WHITE / SD 2055 BLACK (fast) 30,00 1 x 20 2 x 5(2/1 by Weight or Volume) Final color Grey 6,00 1 x 4 2 x 1Filled epoxy system for fillet-joint and bonding 1,50 1 x 1 1 x 0,5For composites structures

Epoxy laminating system for aquacultureSR 8500/ SD 2324 47,80 1 x 28,6 2 x 9,6Clear, food grade epoxy system 20,00 1 x 12 1 x 8For fish and water tanks (100/67 Weight). 5,00 1 x 3 1 x 2

1,67 1 x 1 1 x 0,67

Flexible epoxy systemsSR 8150 232,00 1 x 200 4 x 8SD 815 B1 Fast hardener (83% elongation) 34,80 1 x 30 3 x 1,6(100/16 Weight). Post cuisson OBLIGATOIRE 11,60 1 x 10 1 x 1,6

3,48 1 x 3 1 x 0,48

SD 815 B2 Standard hardener (109% elongation) 238,00 1 x 200 4 x 9,5(100/19 Weight). Post cuisson OBLIGATOIRE 35,70 1 x 30 3 x 1,9

11,90 1 x 10 1 x 1,93,57 1 x 3 1 x 0,57

SD 815 B3 Slow hardener (95% elongation) 252,00 1 x 200 2 x 26(100/26 Weight). Post cuisson OBLIGATOIRE 37,80 1 x 30 3 x 2,6

12,60 1 x 10 1 x 2,63,78 1 x 3 1 x 0,78

SD 815 B4 Ultra slow hardener (100% elongation) 252,00 1 x 200 2 x 26(100/26 Weight). Post cuisson OBLIGATOIRE 37,80 1 x 30 3 x 2,6

12,60 1 x 10 1 x 2,63,78 1 x 3 1 x 0,78

Filled epoxy systems for fillet-joint and structural assembling

Page 10

Wood epoxy systems


LAMINATING AND BONDING in Kg in Kg in KgSR 5550 258,20 1 x 200 6 x 9,7Multi-purpose wood epoxy system 42,70 1 x 33 1 x 9,7SD 5502, 5503, 5504, 5505, 5506 15,48 1 x 12 2 x 1,74 (100/29 Weight or 3/1 Volume) 7,74 1 x 6 1 x 1,74

3,87 1 x 3 1 x 0,871,29 1 x 1 1 x 0,29

SR 8450 348,00 1 x 240 4 x 27Multi-purpose wood epoxy system 87,00 2 x 30 1 x 27For tropical conditions. 15,95 1 x 11 1 x 4,95SD 8451, 8453, 8454 7,97 1 x 5,5 1 x 2,47(100/45 Weight or 2/1 Volume) 3,20 1 x 2,2 1 x 1

1,45 1 x 1 1 x 0,45BONDINGSR 5600 Ratio in volume 1 / 1 Good adhesion on wet surface

SD 5602 Slow hardener 370,00 1 x 200 1 x 170 (100/85 Weight or 1/1 Volume) 49,00 1 x 26,5 1 x 22,5

9,80 1 x 5,3 1 x 4,51,85 1 x 1 1 x 0,85

SD 5604 Standard hardener 370,00 1 x 200 1 x 170 (100/85 Weight or 1/1 Volume) 49,00 1 x 26,5 1 x 22,5

9,80 1 x 5,3 1 x 4,51,85 1 x 1 1 x 0,85

SR 5700 / SD 5703 7,20 1 x 5 1 x 2,21,44 1 x 1 1 x 0,440,72 1 x 0,5 1 x 0,22

Composites, alloys, plastics (100/44 Weight or 2/1 Volume)Can works with a very hight pourcentage of moisture contant in the wood.

Qty (L)EP 217 5,001 st coat impregnation diluent for hard wood 1,00for SR 5550 & SR 8450 0,50Max dilution 2/1 by Volume

Solvent free epoxy coatingsSR 434 / SD 4341 (100/39 Weight) White 34,75 1 x 25 1 x 9,75Paint for swimming pools, boat interiors… 6,95 1 x 5 1 x 1,95

Epoxy system for fuel tankSR 8500 238,80 1 x 200 4 x 9,7SD 2705 Standard hardener (100/20 by Weight) 34,32 1 x 28,6 2 x 2,86Laminating system for diesel tank 14,42 1 x 12 1 x 2,42

7,21 1 x 6 1 x 1,213,60 1 x 3 1 x 0,61,22 1 x 1 1 x 0,22


Structural thixotrop bonding for superior adhesionp y gtogether

Page 11


in Kg in Kg in KgPB170 with DM02 34,00 1 x 25 1 x 9(100/36 Weight) 6,80 1 x 5 1 x 1,8DM 02 Hardener for thick section. Tg 90°C 0,68 1 x 0,5 1 x 0,18

PB170 with DM03 32,75 1 x 25 1 x 7,75(100/31 Weight) 6,55 1 x 5 1 x 1,55DM03 Hardener for thin section. Tg 92°C 0,66 1 x 0,5 1 x 0,16

PB170 with DM06 35,00 1 x 25 1 x 10(100/40 Weight or 2/1 Volum) 7,00 1 x 5 1 x 2DM06 Hardener for thin section. Tg 90°C 0,70 1 x 0,5 1 x 0,2

PB250 / PB400 / PB600 with DM02 34,00 1 x 25 1 x 9(100/36 Weight) (100/37 Weight) (100/35 Weight) 6,80 1 x 5 1 x 1,8DM 02 Hardener for thick section. Tg 85-97°C 0,68 1 x 0,5 1 x 0,18

PB250 / PB400 / PB600 with DM03 32,75 1 x 25 1 x 7,75(100/31 Weight) (100/32 Weight) (100/30 Weight) 6,55 1 x 5 1 x 1,55DM03 Hardener for thin section. Tg 88-92°C 0,66 1 x 0,5 1 x 0,16

PB250 / PB400 / PB600 with DM06 35,00 1 x 25 1 x 10(100/40 Weight or 2/1 Volum) 7,00 1 x 5 1 x 2DM06 Hardener for thin section. Tg 90°C 0,70 1 x 0,5 1 x 0,2

PB250 / SD5602 Slow hardener 47,50 1 x 25 1 x 22,5Does not need post curing. Tg 58-60°C. 9,50 1 x 5 1 x 4,5Works on wet surface 0,95 1 x 0,5 1 x 0,45(100/90 Weight, 1/1 Volum)

PB250 / SD5604 Standard hardener 47,50 1 x 25 1 x 22,5Does not need post curing. Tg 58-60°C. 9,50 1 x 5 1 x 4,5Works on wet surface 0,95 1 x 0,5 1 x 0,45(100/90 Weight, 1/1 Volum)

PB270i with DM02 24,90 1 x 19,5 3 x 1,8(100/28 Weight) Hardener for thick section 6,80 1 x 5 1 x 1,8

PB270i with DM03 24,15 1 x 19,5 3 x 1,55(100/22 Weight) Hardener for thin section 6,55 1 x 5 1 x 1,55



PB350 S with SD1249.17 1400,00 1 x 1000 2 x 200Sprayable version for 2 K machine 280,10 1 x 200 3 x 26,7Manufacturing of lightened laminate100/40 Weight or 2/1 Vol.

Foaming epoxy systems Tg1 149°C possible, contact us.

Foaming epoxy systems 170 to 600 kg / m3Detail of the kit

FAR 25 approval.

(Resin + Hardener)

Page 12

Casting epoxy systems


in Kg in Kg in KgSR 8500 288,20 1 x 200 3 x 29,4Unfilled casting system (100/47 Weight) 42,04 1 x 28,6 2 x 6,72SD 7160 Ultra Slow or SD 1213 Slow 8,94 1 x 6 1 x 2,94For 5L casting and up to 5 cm thick laminate 1,49 1 x 1 1 x 0,49

SR 1500 SD 597.20 (100/25 Weight) Casting system 250,00 1 x 200 5 x 10For 100L casting with fillers to be added. 163,32 4 x 33,33 3 x 10Minimum post curing at 80°C 40,85 1 x 33,33 1 x 7,52

SR 1690 298,00 1 x 200 4 x 24,5Optical quality casting system 80,00 2 x 27 1 x 26SD 7160 (100/49 Weight) 14,90 1 x 10 1 x 4,9Ultra slow hardener 7,45 1 x 5 1 x 2,45

1,49 1 x 1 1 x 0,49

SR TOPCLEAR SL 63,82 1 x 23,5 6 x 6,72Optical quality casting system. 9,74 2 x 3,4 1 x 2,94Depending on the hardener ratio it can gives rigidor flexible casting. SD 1213 (100/86 Weight)

SR CA 85 Casting and chokingUnderwater cure, good fire resistance 31,26 1 x 25 2 x 3,13SD 8451 (100/25 Weight) Slow hardener 6,25 1 x 5 1 x 1,25

SD 8601 (100/17.5 Weight) 29,32 1 x 25 1 x 4,32Very slow hardener 5,88 1 x 5 1 x 0,88(SD 8605 accelerator)

SD 7160 (100/24 Weight) 31,00 1 x 25 2 x 3Ultra slow hardener 6,20 1 x 5 1 x 1,2


SR 5311 295,00 1 x 220 3 x 25SD 597.20 (100/34 Weight) 40,20 1 x 30 1 x 10,2Ultra low viscosity, very low exothermic peak 13,40 1 x 10 1 x 3,4Large casting, minimum post-cure at 90°C 1,34 1 x 1 1 x 0,34Tg 98°C

Epoxy accelerator

Quantity Quantityin Kg in Kg

SA 300 0.1 to 1% by Weight in the resin 0,50 1 x 0,50,20 1 x 0,2

Accelerator

(Resin + Hardener)Detail of the kit

Page 13

Epoxy systems for filling & fairingSR 1610 / SD 2613 / Mix'Fill 30Resin / Hardener / Light filler formulation for thick fairings(100 / 47 / 120 Weight or 2 / 1 / 8 Volum)

Quantity Quantity QuantityQty (Kg) in Kg in Kg in Kg

Kit for 895 liters of filler 652,80 1 x 240 4 x 28,2 6 x 50Kit for 258 liters of filler 188,20 2 x 30 1 x 28,2 2 x 50Kit for 37 liters of filler 26,70 1 x 10 1 x 4,7 2 x 6Kit for 18 liters of filler 13,35 1 x 5 1 x 2,35 1 x 6Kit for 4 liters of filler 2,79 1 x 1,05 1 x 0,49 1 x 1,25

SR 1610 / SD 2613 / Mix'Fill 10Very light filler formulation for finishing fairing, easy to sand & does not clog sandpaper(100 / 47 / 40 Weight or 2 / 1 / 8 Volume)

Quantity Quantity QuantityQty (Kg) in Kg in Kg in Kg

Kit for 660 liters of filler 448,80 1 x 240 4 x 28,2 4 x 24Kit for 165 liters of filler 112,20 2 x 30 1 x 28,2 1 x 24Kit for 28 liters of filler 18,70 1 x 10 1 x 4,7 1 x 4Kit for 14 liters of filler 9,35 1 x 5 1 x 2,35 1 x 2Kit for 3 liters of filler 1,96 1 x 1,05 1 x 0,49 1 x 0,42

Resin SR 1610 Hardener SD 2613 Filler MixFill 30

Filler MixFill 30Resin SR 1610 Hardener SD 2613

Page 14

Epoxy systems for humid, wet and underwater applications


in Kg in Kg in KgSR 632 / SD 7262 (100/48 Weight or 2/1 Vol.) For fast laminating at low temperature 14,80 1 x 10 2 x 2,4température. 1,48 1 x 1 1 x 0,48

SR 5700 / SD 5703 7,20 1 x 5 1 x 2,2

1,44 1 x 1 1 x 0,440,72 1 x 0,5 1 x 0,22

Composites, alloys, plastics (100/44 Weight or 2/1 Volume)Can works with a very hight pourcentage of moisture contant in the wood.

SR CA 85 Casting and chokingUnderwater cure, good fire resistance

SD 8605 (100/17 Weight) Fast hardener 29,32 1 x 25 1 x 4,32

SD 8451 (100/25 Weight) Slow hardener 31,26 1 x 25 2 x 3,136,25 1 x 5 1 x 1,25

SD 8601 (100/17.5 Weight) 29,32 1 x 25 1 x 4,32Very slow hardener 5,88 1 x 5 1 x 0,88



Gel coat


in Kg in Kg in KgSG 162 CS Abrasion resistant gel 5,00 1 x 4,57 1 x 0,43for tooling with service temp. up to 60°C 1,00 1 x 0,91 1 x 0,09SD 2625 (100/9,5 Weight) Brush viscosity

SG 520 Blue For tooling with a 4,13 1 x 3,13 1 x 1service temp. up to 60°C. Brush viscosity 1,32 1 x 1 1 x 0,32SD 5202 (100/32 Weight)

SG 715 White or black 25,40 1 x 20 2 x 2,7Excellent UV stability, sprayable 6,35 1 x 5 1 x 1,35SD 802 (100/27 Weight) 1,27 1 x 1 1 x 0,27

EP 960 Spraying solvent for 1,00epoxy gelcoat SG 715. 0,50

SG 166 GM Black brush 31,00 1 x 25 1 x 6For tooling, Tg1 max 148°C 4,96 1 x 4 1 x 0,96SD 902 (100/24 Weight) 1,24 1 x 1 1 x 0,24

ER Translucent Gel Coat Fast or Slow 28,00 1 x 20 1 x 8Translucent Epoxy Gel Coat ED Hardener 5,00 1 x 3,57 1 x 1,43Service Temperature 70°C (100/40 Weight) 1,40 1 x 1 1 x 0,4


p y gtogether

(Resin + Hardener)

Structural thixotrop bonding for superior adhesion

Detail of the kit

Page 15


in Kg in Kg in Kg280,10 1 x 200 3 x 26,7

GP 505 (100 / 40 Weight) 35,00 1 x 25 1 x 10Epoxy system to be formulated with 7,00 1 x 5 1 x 2a high percentage of biomass carbon 1,40 1 x 1 1 x 0,4content, Tg 74°C

GREENONE (100 / 38 Weight) 276,00 1 x 200 (2x28)+(2x10)Epoxy system to be formulated with 35,00 1 x 25 1 x 10a high percentage of biomass carbon 6,90 1 x 5 1 x 1,9content. 1,39 1 x 1 (1x0,11)+(1x0,28)Clear epoxy system for sailboards, surfs, models. SD GlassOne (100 / 38 Weight)

Detail of the kit

(Resin + Hardener)

GREENPOXY 55

SICOMIN has researched on the means to decrease the impact of its activity on global warming,proposing today a range of products formulated in this spirit.GRΞENPOXY 55 is our first epoxy system to be formulated with a high percentage of biomass carbon content. SICOMIN’s point of view is that it is the carbon assessment, rather than the modified molecules, which is the most representative quality measure. The formulation of an epoxy system is a compromise between various usual characteristics. “Traditional” organic chemistry offers a vast choice of raw materials, while the “green” sourced raw materials are still rare. GRΞENPOXY 55 is an epoxy system with a single hardener, where 55 % of the molecular structure is of plant origin. Modification of the reactivity will be possible, but might reduce the percentage of “green” components within the product. GRΞENPOXY 55 has 55 % of its molecular structure originating from plants. We measure this percentage according to the origin of carbons which the molecule contains.The fictitious molecule illustrated below contains 11 carbons, 6 being from biomass origin. It thus contains 55 % of “green” carbon.The hardener GP 505 follows the same logic and contains a maximum rate of carbon coming from the biomass.

GRΞENPOXY 55 has an average viscosity enabling the manufacturing of various parts

Applications

- Hand lamination for tooling or industrial parts- RTM processes (infusion, injection…)- Filament winding- Hot or cold press- Casting- Bonding

Page16

SICOMIN Multiaxial Fabrics

Approx.References Weight Length

E Glass 0° +45° 90° -45° Mat g / sq.m roll.(lm)

Unidirectionnals L 400/30 331 55 386 104L 500 415 55 50 520 76L 600 567 24 591 67L 950 850 108 958 41

L 606/30 605 55 50 710 57

Stitched rovings LT 300 144 168 312 128LT 576 288 312 600 67LT 630 630 63LT 850 413 432 845 47

LT 1212 606 600 1206 33LT 1700 850 850 1700 23

Stitched non crimp + CSM LT M 600/300 331 300 300 931 43LT M 850/300 413 432 300 1145 35

Biaxials BX 300 152 152 304 132BX 311 1 151 1 151 1 305 129BX 400 200 200 400 100BX 450 224 224 448 89BX 600 305 305 610 66BX 800 400 400 800 50

BX 1000 500 500 1000 40

Biaxials + CSM BX M 370/80 179 179 80 438 91BX M 390/90 200 200 90 490 82

BX M 400/200 200 200 200 600 67BX M 450/100 226 226 100 552 72BX M 600/225 300 300 230 830 48BX M 700/100 339 339 110 788 51BX M 800/300 400 400 300 1100 36

High drape BX 550 HD 550 73Biaxials BX 936 HD 468 468 936 43

Triaxials TLX 560 288 136 136 560 71 TLX: Longitudinal Triaxial TLX 710 288 209 209 706 57

TLX 860 288 288 288 864 46TLX 1000 561 221 221 1003 40TLX 1200 288 476 476 1240 32

Triaxiaux + mat TLX M 800/300 288 250 250 788 51 TLX: Longitudinal Triaxial

TTX: Triaxiaux transvers. TTX 600 217 165 217 599 67TTX 1200 300 614 300 1214 33

Quadriaxials QX 600 142 150 142 150 584 68QX 700 280 150 140 150 720 56QX 840 285 150 285 150 870 45

QX 1000 288 235 240 235 998 40QX 1178 283 301 283 301 1168 34

Quadriaxial + matQX M 800/225 288 170 192 170 230 1050 38QX 1178/225 283 301 283 301 225 1393 28

(*) Price by roll of 50-60 Kg. Consult us for prices by quantity. Unidirectionnal and biaxal fabrics can be cut in tape, consult us.E glass Mutiaxial fabrics can be, on demand, stitched on CSM 100, 225, 300 or 450 g/sq.m. HD : Biaxial fabrics with "High Drape" stitching.

Weight in g / sq.m

Page 17

SICOMIN Multiaxial Fabrics

Aramid / References Weight Length

Glass 0° +45° 90° -45° Mat g / sq.m roll.(lm)

Biaxial ARE BX 400 200 0 200 400 100

HR CarbonBiaxials C BX 150 (1) 75 75 150 262

C BX 200 (1) 100 100 200 200C BX 300 150 150 300 133C BX 400 200 200 400 100C BX 440 220 220 440 91C BX 600 290 290 580 68C BX 800 400 400 800 50

Triaxiaux transvers. C TTX 750 245 268 245 758 53

(*) Price by roll of 50 kg.Consult us for prices by quantityNB : Fabrics are delivered in 1,25 m wide and approx. 50 kgUnidirectionnal and biaxal fabrics can be cut in tape, consult us.For the references not present on this price list, consult our sales department(1) 100 ml by roll

Weight in g / sq.m

Page 18

Woven fabricsFABRICS References Weight Weave Larg.

Felts (g / sq.m ) (cm)Polyester Armstrim 50 50 Felt 50Woven fabricsGlass 2048 48 plain 96,5

2086 86 plain 1052106 106 plain 110

2125 C 125 plain 802160 160 plain 82

2208 C 206 plain 802210 202 plain 802210 202 plain 1303160 162 Twill 2/2 1003200 202 Twill 2/2 1203300 300 Twill 2/2 1003400 400 Twill 2/2 100

Carded (for mould) V 100 100 plain 100V 205 205 plain 100V 500 500 plain 100

Aramid K 120 61 plain 120K 145 115 plain 100K 281 171 plain 120K 336 220 plain 120K 323 285 plain 120K 322 300 plain 100

Carbon C 95 (Yarn 1 K) 95 plain 100C 450 (Yarn 3 K) 193 plain 100C 450S(Yarn 3 K) 193 Twill 2/2 100

193 plain 127193 Twill 2/2 127

C 430 (Yarn 3 K) 285 plain 120C 430 S (Yarn 3 K) 285 Twill 2/2 120

Carbon / Aramid KC 639 170 plain 120

Polyester Diolen 14 K 158 plain 125

Peeltex Peel ply see page 22-23

Roving Weight WeaveReferences (g / m2) width

Nature of filament (cm)E Glass R270 270 plain 100

R400 400 plain 100R500 500 plain 100

RS600 400 plain 127RS800 500 plain 127

TINTED GLASS FABRICTEX3200ALU 200 Twill 2/2 120

300 Twill 2/2 80

COLORTEX 200 Twill 2/2 127200 Twill 2/2 127

(*) Prices by roll. Consult us for prices by quantity. Other products available on demandCOLORTEX RED

C 450 (Yarn 12 K) powedered 1 faceC 450 S (Yarn 12 K) powedered 1 face

TEX3300GRAPHITE

Page 19

Unidirectionnals

Nature of filament References Weight Weave Width

(g / m2) (cm)Woven E glass

4190 190 UD tape (81/19) 100

4220 220 UD tape (93/7) 100

4290 290 UD tape (90/10) 100

UDV 300 300 UD tape 1030

UDV 600 600 UD tape 5103060

Carbon woven glass UDC-160 160 Woven UD 104Powedered 1 face

Carbon CX 125 125 Non woven 5(thermoplastic binder) UD tape 10

30

Carbon woven UDC 300 300 UD tape 510153060

Carbon woven UDC 600 600 UD tape 51015203050

(*) Prices by roll. Consult us for prices by quantity.Other products available on demand.

SPHERETEX: Fabrics for micro & macro sandwich structures

Plain weave impregnated with Thickness Weight lm byhollow microspheres (mm) (g /sq.m) roll 110.1,5 1,5 + 0,1 110 100110.1,5 SN Soft version 1,5 + 0,1 110 100170. 2 2,0 + 0,2 170 70170.2 SN Version soft 2,0 + 0,2 170 70Thicknesses and weights submit to tolerances.(*) Prices by roll. Consult us for prices by quantity.

Page 20

Tubular braid, flat braid, tape

Tubular braid 45°Carbon (g / lm ) (g / m² )Tubular carbon braid 45° diam 15 mm 14 297Tubular carbon braid 45° diam 30 mm 41 435Tubular carbon braid 45° diam 50 mm 54 345

E glass (g / lm ) (g / m² )Tubular glass braid 45° diam 60 mm 115 610Tubular glass braid 45° diam 80 mm 148 590

Flat braid 30°E glass (g / lm ) (g / m² )Flat glass braid 30° width 50 mm 34 680Flat glass braid 30° width 100 mm 46 460

Carbon (g / lm ) (g / m² )Flat carbon braid 30° width 50 mm 45 900

Tape 0°E glassGlass UD tape 174 g/sq.m width 15 mmGlass UD tape 174 g/sq.m width 25 mmGlass UD tape 174 g/sq.m width 50 mm

Glass UD tape 350 g/sq.m width 15 mmGlass UD tape 350 g/sq.m width 25 mmGlass UD tape 350 g/sq.m width 50 mm

CarbonCarbon UD tape 174 g/sq.m width 15 mmCarbon UD tape 174 g/sq.m width 25 mmCarbon UD tape 174 g/sq.m width 50 mm

Carbon UD tape 350 g/sq.m width 15 mmCarbon UD tape 350 g/sq.m width 25 mmCarbon UD tape 350 g/sq.m width 50 mm

Others specialities on demand: Aramid braid, elastic carbon UD braid ...

Weight

Weight

Page 21

Accessories for vacuum

Widthof the fabric

Bleeder (cm)Bleedex High permeability bleeder 75

Feltrex 150 Bleeder for thin laminate 150 g / m2 75Feltrex 300 Bleeder for thick laminate 300 g / m2 75

Release filmPerforex Plastic film micro-perforated 90Limits the resin flow, ease the peeling of vacuum consumables

Peel plyPeeltex 2,5 100Peelply with green and blue stripes. 5 100Tear resistant peel ply 10 100Temperature resistance: 130°C 15 100

20 10030 10080 100160 100

Peeltex Fluo 15 100Green peelply 20 100Temperature resistance 130°C 30 100

80 100127 100

PeeltexEco 2,5 100Peelply with red stripes for polyester or 5 100low temperature epoxy applications. 10 100

15 10020 10030 10080 100100 100127 100160 100

Vacuum filmTubular PE bag 90 Sold by linear meter

Nylex 50µm nylon vacuum film 200 100Temperature resistance: 150°C 300 100

Nylex 75µm nylon vacuum film 100Temperature resistance: 150°C

Vacuum tapeSealtex Tacky tape 13 mBy box of 22 rolls 22 x 13 mTemperature resistance over 80°C

Microperforated PVC foams dedicated to vaccum processes see page 39

Sealtex

Nylex Bleedex or Feltrex Perforex Peeltex

Mould

Vaccum

Laminate

Page 22

Accessories for vacuum infusion

Widthof the fabric

Drainage net (cm)Resipass 305 100

Vacuum filmTubular PE bag 90

by linear meter

Nylex 50µm nylon vacuum film 200Temperature resistance: 150°CNylex 75µm nylon vacuum film 100Temperature resistance: 150°C

Release filmPerforex Plastic film micro-perforated 90Limit the resin flow, ease the peeling of vacuum consumables

Peel plyPeeltex 2,5 100Peelply with green and blue stripes. 5 100Tear resistant peel ply 10 100Temperature resistance: 130°C 15 100

20 10030 10080 100160 100

Peeltex Fluo 15 100Green peelply 20 100Temperature resistance 130°C 30 100

80 100127 100

PeeltexEco 2,5 100Peelply with red stripes for polyester or 5 100low temperature epoxy applications. 10 100

15 10020 10030 10080 100100 100127 100160 100

Vacuum tapeSealtex Tacky tape 13 mTemperature resistance over 80°C. By box of 22 rolls 22 x 13 m

Microperforated PVC foams dedicated to vaccum processes see page 39Omega profiles " infusion grade"- consult us

Sealtex

Laminate

Tube

Perforex Peeltex

Mould

Vacuum

Vacuum film

Infusion ramp Drainage net

Page 23

Accessories for vacuum and infusion processes.

T Nylon fitting 1/4For the pipes ID 8mm - OD 10mm

Straight PE fitting 8 mmFor the pipes ID 8mm - OD 10mm

T PE fitting 8 mmFor the pipes ID 8mm - OD 10mm

Quick Connexion 3/8 Int .Diam. 10 mmFor the pipes ID 8mm - OD 10mm

Straight PE fitting 90° 12 mmFor the pipes ID 12mm - OD 15mm

Straight PE fitting 12 mmFor the pipes ID 12mm - OD 15mm

PE Pipe diam. 8-10 mm in 25 ml. PE Pipe diam. 10-12 mm in 25 ml. PE Pipe diam. 12-15 mm in 25 ml.

Spiral PE pipe Diam 10-12 mm in 20 mlPermit the resin to transfer under the vacuum bag.

Vacuum gage 1/4" - 1200 to 0,0 mbar

Page 24

Pack size

Release agents Liter(s) Kg

Cirex PV6 3,8 2,85Sprayable sealer for one off release, create a surface film.Ideal to seal a pattern made from porous material (Wood, plaster, medium…)

Cirex Si 111 1 0,8Thixotropic paste release agent 5 4Ideal for technical flanges on RTM toolings or porous substrates

Cirex Si 112 5Versatile yellow wax, use till 50°C. Avoid "fish eyes" for moulding without gelcoat.

Cirex FK 1000P 0,4 0,426Wax for high temperature application, epoxy, polyester, vinylester resins till 200°CHigh gloss.

Cirex Si 022 1 0,84Sealer for semi-permanent release agent. 5 4,2Avoid build up in mould

Cirex Si 023 1Concentred sealer for semi-permanent release agent. 5Avoid build up in mould. Godd resistance when walking in the mould.

Bouche-Pores W1 1 0,84Warerbased sealer for Si 041 WB 5 4,2

Cirex Si 040 WBWaterbased release agent for epoxy, polyester and vinylester resins 1 0,84till 250 °C. Avoid fish eyes and -release. 5 4,2Compatible with sealer Si 022 and Si 023.

Cirex Si 041 WB 1 0,84Universal water based release agent for all kind of polymers till 420°C. 5 4,2Compatible with sealer Bouche-Pores W1.

Cirex Si 042 5 4,25Semi-permanent release agent for epoxy, polyester and vinylester. High gloss. Release till 390°C. Very efficient on all type of substratesCompatible with sealer Si 022 and Si 023.

Cirex Si 043 5 3,75Concentred semi-permanent realease agent for epoxy, polyester, vinylester and phenolic resin. sliding effect, excellent for mould with a big draw and low taper.Very efficient on metallic mould.Service temperature till 400°CCompatible with sealer Si 022 and Si 023.

Cirex Si 60 1 0,8White viscous semi-permanent release agent for epoxy, polyester 5 4and vinylester till 180°C.Compatible with Cirex Si 023, avoid fish eyes and pre-releaseCan be use on wax.

Page 25

Pack size

Release agents (suite) Liter(s) Kg

Cirex Si 65 N 5 4Semi-permanent release agent for epoxy, polyester and vinylester resin.till 180°C. Easy to polish.Compatible with Cirex Si 023, avoid fish eyes and pre-release

Cirex Si 66 5 4,05Semi-permanent release agent for epoxy, polyester and vinylester resin.till 180°C. Easy to polish.Compatible with Cirex Si 023, avoid fish eyes and pre-release

Cirex Si 68 1 0,78Permits the release of solvented product 5 3,9(Epoxy & Polyurethanne paints). Liquid, use till 120°CCompatible with Cirex Si 023 and traditional wax.

Cirex DE 73 5 5Water based release agent, ideal for filament winding. 20 20Release of epoxy, polyester and phenolic, till 200°C

Cirex Si 019 5 8Mould cleaner, use before application 20 16of new release agent, do not damaged the gelcoatNOTA : The sealer/release agents are sprayable, but requirea light polish with a cloth if a glossy finish is required.Average consumption by spray : 10 to 15 ml / sq.m / coatCirex Si 022 and SI 023 permits to optimize the semi permanent effect of the release agent describe previously.

Glass woven coated PTFEThickness (mm)

Self adhesive glass woven PTFE, width 100 cm7/100

12/100

Page 26

Standard PE foam profils (24 Kg/cubic meter) E150Length : 2.75 m

References Advised A B C D Qty byFabrics (mm) (mm) (mm) (mm) Box

25 / 20 / 30 To 23-225 mm 25 20 30 12 576

30 / 25 / 40 To 23-275 mm 30 25 40 20 360

40 / 30 / 50 To 40-325mm 40 30 50 20 210

45 / 20 / 45 To 40-325mm 45 20 45 12 216

50 / 40 / 60 To 40-325mm 50 40 60 30 144

60 / 25 / 60 To 65-445mm 60 25 60 20 140

60 / 50 / 65 To 65-445mm 60 50 65 40 100

80 / 50 / 80 80 50 80 40 63

80 / 80 / 105 80 80 105 60 42

100 / 80 / 110 100 80 110 60 36

100 / 100 / 130 100 100 130 80 30

120 / 120 / 150 Consult us 120 120 150 110 20

120 / 95 / 130 120 95 130 75 25

150 / 120 / 160 150 120 160 100 16

160 / 100 / 150 160 100 150 80 12

200 / 92 / 30 200 92 30 15 60

200 / 120 / 180 200 120 180 100 12(*) Consult us for prices by quantity, "Infusion grade" (35kg/cubic.m) E220 - Consult usThe list above is corresponding to the most used profils in the composites field. Do not hesitate to contact our technical department for dimensions adapted to your requirements.These polyethylene extruded profils are compatible with polyester and epoxy resins.

Oméga profiles "fillet-joint" E 220Exist in 20 x 20 mm, length 1375mm, 104 profils by boxExist in 30 x 30 mm, length 1375mm, 148 profils by box

Special triaxial fabric for OMEGA system

Reference Total width Width of UD Weight/lm(mm) (mm) (g)

To 23-225 mm 225 23 202To 40-325mm 325 40 295To 65-445mm 445 65 410

567 g / sq.m at 0°

ETHAFOAM E220 White extruded polyethylene foam 35kg/cubic meterSheets (dimensions in mm: L x l x h)EthaFoam sheet 30 mm 2750 x 600 x 30 49.5EthaFoam sheet 50 mm 2750 x 600 x 50 82.5EthaFoam sheet 60 mm 2750 x 600 x 60 99EthaFoam sheet 80 mm 2750 x 600 x 80 132.0EthaFoam sheet 100 mm 2750 x 600 x 100 165.0Others profils and density available on order, consult us

Profil (l= 2,75 m)

To xx-xxx mm Oméga

420 g / sq.m at -45°

420 g / sq.m at +45°

Page 27

Fillers Weight in Pack ofKg … liter(s)

Whitecell 0,02 1Hollow Microspheres of thermoplastic copolymer fo 0,11 5White powder 0,6 30

5 160

Glasscell 10 0,07 1Hollow Microspheres of glass, low density 100 g/l 0,43 5White powder 2,2 30

Glasscell 25 0,14 1Hollow Microspheres of glass, low density 250 g/l 0,8 5Excellent mechanical properties.White powder 4,1 30

40 250

Phenolic microballoons 1Hollow Phenolic Microspheres, low density and eas 0,7 5Brownish red 3,6 30

12 200

Fillite 0,46 1Hollow Aluminium silicate Microspheres for coarse 2,5 5Excellent mechanical properties 13 30Brownish grey powder 20 50

Silicell 0,05 1Fumed colloïdale silica. Thixotropic agent (anti-sag 0,3 5Do not work with polyurethanne 1,7 30White powder 10 150

Silicell H2 0,05 1Hydrophobic collïdale silica.Thixotropic agent (anti- 0,28 5White powder 1,5 30

10 150

Treecell 0,15 1Pure cellulose microfibers for wood bonding 0,9 5White cotton texture powder 4,9 30

20 110

Mix' Fill 10 0,12 13 component finishing light weight filler, for thin sec 0,42 5Grey powder 4 30

24 220

Mix' Fill 30 0,34 13 component light weight filler, for deep defects fillin 1,25 5Beige powder 6 30

12,5 env. 4050 220

Wood Fill 250 0,28Polyvalent formulated filler for high density fillet-join 1,6wood bonding. Wooden colour 9 30

Wood Fill 130 0,18 1Formulated filler for low density fillet-joints 1 5White powder 6 30

"Mahogany" powder 25 gPigment for fillet-joints 500 g

Page 28

Fillers Weight in Pack ofKg … liter(s)

Fill' Tool 400 1 1Abrasion resistant formulated filler for tooling gelcoa 5 5Grey-blue colourFill'Cast 21 5 5Formulated filler for mould making by casting 25 30Thermal conductivity close to aluminium

Aluminium powder 1 1Particle size below 60 microns 5 5

Aluminium granules 1 1Granule size from 200 to 1000 microns 5 5

25 30

Granule size from 1000 to 3150 microns 50

Micronized lead powder 25 5For high density casting and filling. D>5

Graphite powder 0,33 1Anticorrosion and sliding properties 2 5

Quantities of fillers added to the resin

Density @ maxReference Bulk qty of fillers

Density By Weight By Volume. max.(g) (ml) (g/l)

Whitecell 36 2 - 7 120 - 190 370Glasscell 10Phénoliques 104 7 - 35 60 - 320 500Glasscell 25 140 5 - 25 30 - 200 600

Fillite 350 30 - 110 85 - 320 730Mix Fill 30 310 40 - 100 130 - 320 600Mix Fill 10 100 24 - 30 240 - 300 660

Wood Fill 250 250 20 - 80 80 - 320 1 080Wood Fill 130 130 20 - 50 150 - 380 770

Treecell 80 5 - 17 40 - 210 1 150Silicell 50 3 - 9 60 - 180 1 170

Fill' tool 930 80 - 200 90 - 210 1 800Fill' tool Alu 60 - 180 1 630

Poudre de graphite 415 20 - 70 50 - 170 1 360Alu granules 200-1000 1160 100 - 250 90 - 220 1 720

Qty min - max

Theses quantities are based on a resin having a viscosity of 800 Cps @ 20°C.

for 100g or 100ml R+H

Page 29

Hand tools & accessoriesUnit

Graduated plastic cup 350 ml 10

Tap Flo-King (brown 2 inches) for 200 L drum pieceTap (White 3/4 inch)for 30 L jerrycan and 200 L dru piece

Mini-pumps for volume mixing ratio*Mixing ratio : 1/1, 2/1, 3/1.

Wooden mixing stick (150 mm) 100

Scissors for cutting glass, carbon, aramidSmall 8' pieceBig 10' piece

Brushes 30 mm 10Brushes 50 mm 10

Handle for lacquer roller Unit

Lacquer roller (without handle) 10

Aluminium roller, plastic handle Diam 15 x Width 70 pieceAluminium roller, plastic handle Diam 15 x Width 14 piece

Roller for Deck LineRoller in foam diam. 75 mm long. 175 mm UnitHandle for 75mm diam. roller in foam Unit

Roller in foam diam. 35 mm long. 115 mm UnitHandle for 35mm diam. roller in foam Unit

Cleaning paper 2 layers 350 lm Unit

* Mini-pumps for volume mixing ratio can be used with theSR 5550 for kits of 3.9 Kg to 14.5 Kg mix 3/1 en volumeSR 8450 for kits of 4.35 Kg to 14.7 Kg mix 2/1 en volumeSR 1610 for kits of 40 to 80 liters of fillers 2/1 en volumeGlass One & Surf Clear for kits of 5 Kg mix 2/1 en volume

Page 30

Electric Scissors

Electric Scissors piecePermet la découpe de tout tissus jusqu'à 200g/m²(remise -20 % par 5 kits ) Ce kit est composé de : -1 ciseau électrique ergonomique, au look "carbone", -1 jeu de lames standard, -1 jeu de lames à sabot, -1 connecteur/cordon pour utilisation sur secteur, -1 batterie, -1 chargeur 220 volts et son socle. Permet de couper tous les tissus techniques, avec facilité, rapidité, et confort. Soit sur secteur, soit sur batterie (autonomie env. 4h00)-Pièces détachées: -Jeu de lames de rechange (version sans sa piece -Batterie de rechange piece

Balances OHAUSPrecision electronic balance OHAUS Balance OHAUS CS200 Capacity 2 Kg, readability 1 g pieceEconomical balance for usual weighting. Different units g, oz, lbWorking on battery (included) or AC adapter (included)With Stainless steel pan.

Balance OHAUS SCOUT2 6000 Capacity 6 Kg, readability 1 g.Balance for worshop or laboratory. Different units g, oz, lb. Working on battery (not included) or AC adapter (included) piece

Accessories for kite board manufacturing ABS edges Per profil Natural black ABS edges 4 x 10 x 2 000 mm

Stainless steel insertsInserts M6 depth 8 mm A2 Stainless steel Per 10

Page 31

Epoxy Dispensing Machine

Manual Dispensing Machine RMA

get the best possible ratio of price-quality possible while still keeping our usual standards.

Options : Mixing Adapter (AMM), Heater(AHT)

Medium Dispensing Machine RMX

Control Panel (ACP), Refill Pumps (ARE)

Large Dispensing Machine RLX

larger companies or factories with larger resin output in the same unit.All Accessories will work with this machine.

OPTION :ATM

This way it is possible to set 10 different weight quantities to be dispensed at the push of a button.This allows more control of the final exact output and needs less attention from the workers.

AAG For RMXThe Agitator AAG can be added to all X-Series For RLXstirred in a pre-set time interval. This is helpful if the resin needs to be colored or stirred.It can be set with a timer at specific times. It then stirs the liquid automatically.Fit to Machines All X-Series

AHTThis heater can be added to all Machines. It is necessary if the working area is below 20˚C For RMAor with special resins. A moderate temperature heating belt to maintain the resin at an For RMXappropriate viscosity to not damage the pumping system nor alter the correct resin: For RLXhardener ratio under extreme conditions.Temp. (˚C) 25 - 45Fit to Machines All A-Series and all X-Series

ACPThe Control Panel can be added to all X-Series Machines and allows the machine to be controlled from another room or through walls.This is ideal for factories that want to strictly separate the material from the production.Fit to Machines All X-Series

AMMThe Mixing Adaptor can be used with all Machines and allows the resin andhardener dispensed with the correct ratio to be mixed at the same time.It is working with disposable static plastic mixers.

AREThese allow the Resin and Hardenerto be pumped into the machines as effortless and clean as possible.They work with any drum size. The stand allows easy access to the drum to change it.Feed rate 5-10 sec / 100 gr mixedFit to Machines All A-Series and all X-SeriesPièces détachées :Kit pignon chaînePignons pour machines à mixerManivelle pour machine à mixer RMAPompe 8cc pour machine à mixer

Options : Timer Unit (ATM), Agitator (AAG), Mixing Adapter (AMM), Heater (AHT),

The Large Machine is the same as the Medium Machine, but with larger tanks. It would be

We are currently in development for a High Output Large machine with an app. feed rate: 5 Options : Timer Unit (ATM), Agitator (AAG), Mixing Adapter (AAM), Heater (AHT), Control

The Manual Machine is a completely mechanical machine. Our main goal when designing it

This Dispenser is ideal for very small companies with low resin usage or in high quantities by

The Medium Machines were designed to make the job of dispensing and ratio setting as as possible with as much comfort as possible. All Accessories will work with this machine.

The timer ATM can be added to all X-Series Machines and allows to set specific weight prog

Fit to Machines : All X-SeriesThis allows more control of the final exact output and needs less attention from the

We realized the need for simple, easy-to-use-and clean, strong, and affordable dispensing machines. Thus we developed .Any size of business will find our dispensing machines useful. Due to the simplicity of the products we are able to control the price. Small companies with lower budgets, large companies with many smaller lines but separately operating, R&D areas, projects, rental.Providing the right ratio to mix epoxy/hardener in the simplest way possible.

Page 32

Protection & SafetyBarrier cream for hands Tube of 100 ml

Proclean (special epoxy soap) 1 Kg

Nitril powdered gloves Size 9,5 Box of 100

Throw-away latex gloves, size 9/10 Box of 100

Harm protection, universal size Box of 100

Overall PieceSize XL by box of 25 Units

Cleaning solvent for epoxy, polyurethane and polyesterMethyl Ethyl Ketone (MEK) 30 l / 24.1 kgDensity = 805 g/l 10 l / 8.05 kg

3 l / 2.41 kg 1 l / 0.81 kg

SlatexTwo component polyurethanne elastomer, self levelling and degassing.Its excellent resistance to load, permit to use it on its own as a confortable coating.Low viscosity, excellent chemical resistance to hydrocarbons and water.Excellent abrasion and compression resistance.

Qty QtyQty (Kg) Kg Kg

25,00 1 x 19 1 x 6Standard colour : GREY

Soft coating

Hardener Part BResin Part A

Page 33

sq.m Panels

(inch) (mm) / box / box3/16 4,8 49,12 661/4 6,4 37,95 513/8 9,5 24,56 337/16 11,1 21,58 291/2 12,7 18,61 25 5/8 15,9 14,88 2011/16 17,5 13,40 18 3/4 19,1 12,65 17 1 25,4 9,67 131 1/4 31,8 7,44 101 1/2 38,1 5,95 81 3/4 44,5 5,21 72 50,8 4,47 62 1/4 57,2 3,72 52 1/2 63,5 2,98 42 3/4 69,9 2,98 43 76,2 2,98 4Panel sizes: 61 (+/- 0,75 mm) x 122 (+/- 3 mm) cm, thickness +/- 1,5 mm.Panel surface: 0,744 m²

(*) By complete box (**) Minimum ordering of 5 paperboards. Delivery periods from 11 to 13 weeks

Edition October 2006

Possibles options of balsa products

AL Surface treatment by coating of resin (AL600)to decrease the porosity and increase the bonding

P Perforation (2mm diameter, 50 mm distance)

GP Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mmwide, 2.5 mm deep and distance 20 mm on both sides (*) By complete box

GPS Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mmwide, 2.5 mm deep

T High precision of cutting +/- 0,25 mm

ReferenceDensityLength

Thickness(pouce) (mm)3/8" 9,521/2" 12,75/8" 15,911/16" 17,53/4" 19,051" 25,41 1/4" 31,81 1/2" 38,1 208

312260

416

624494

/ box832

Thickness

151 Kg / m3

Density 102 to 176 Kg / m3

Profil ML

253,76190,32

SB 100 CK SB 100

442

158,60126,88

FILLET STRIPS 151 kg / m3 (Density 102 to 176 Kg / m3)

61 cm

507,52380,64301,34269,62

/ box

End grain balsa panelService temperature up to 150°CHigh mechanical properties

Fillet StripsTapered flexible strips

BALTEK ® FILLET STRIPSTapered flexible strips for fast chamfer making

BALTEK® SB.100CKSanded sheets, crossed cuttings on the whole thickness , back up with a fabric

BALTEK® SB.100GPSSanded sheets. Perforations (diameter 2mm, 50 mm distance) and cuttings (0.7 mm wide, 2.5 mm deep).

BALTEK® SB.100Rigid and sanded panels

BALTEK ® SB100Rigid end grain panel.

BALTEK ® SB100 CK Panel of grid pattern balsa onto glass fabric

**

*

*

**

******

**

********

*

*

*

**

**

**********

**

Page 34

Other densities available on demand

sq.m panels(inch) (mm) / box / box3/16 4,8 49,12 661/4 6,4 37,95 513/8 9,5 24,56 33 7/16 11,1 21,58 29 1/2 12,7 18,61 25 5/8 15,9 14,88 20

11/16 17,5 13,40 183/4 19,1 12,65 171 25,4 9,67 13

1 1/4 31,8 7,44 101 1/2 38,1 5,95 8 1 3/4 44,5 5,21 7

2 50,8 4,47 6 2 1/4 57,2 3,72 5 2 1/2 63,5 2,98 42 3/4 69,9 2,98 4

3 76,2 2,98 4Panel sizes: 61 (+/- 0,75 mm) x 122 (+/- 3 mm) cm, thickness +/- 1,5 mm.Panel surface: 0,744 m²Possible options on balsa productsAL Surface treatment by coating of resin (AL600)

to decrease the porosity and increase the bondingCK Contour (*) By complete boxP Perforation (2mm diameter, 50 mm distance)GP Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm

wide, 2.5 mm deep and distance 20 mm on both sides

GPS Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm wide, 2.5 mm deep

T High precision of cutting +/- 0,25 m

References

DensityThickness

SB 5077 to 116 Kg /m3

SB 150216 to 280 Kg /m3

BALTEK® … CKSanded sheets, crossed cuttings on the whole thickness , back up with a fabric

End grain balsa panelService temperature up to 150°CHigh mechanical properties

BALTEK® SB...GPSSanded sheets. Perforations (diameter 2mm, 50 mm distance) and cuttings (0.7 mm wide, 2.5 mm deep).

*

***

**

Page 35

Panels Panels

/ box / box25 10016 6512 50

(1) On special order and with minimal quantity of 1000 sq.m by reference

ReferenceDensity

Thicknesstolerance ep. Panels(+/-0,5 mm) / box

3 mm 504 mm 505 mm 50 8 mm 30

10 mm 25 12 mm 20 15 mm 1620 mm 12 25 mm 10 30 mm 8 40 mm 6 50 mm 560 mm 470 mm 3

Blank (2) 75 mm 3Blank (2) 78 mm 3(1) Tolerance of thickness on the blank (+0,8/-0,2 mm)(2) Tolerance of thickness on the blank +/- 2 mm

Dimensions 2500 x 1200 mmTolerance (Larg.+/- 10mm Long .+/- 10mm)

Reference C 51.60 Density 60 kg / m3

3 sq.mtolerance ep. (+/- 1 mm)Surface of panel

10 mmThickness

20 mm15 mm (1)

HEREX C 71.55 ET HEREX C 71.75 ETDimensions

in mmTolerance

Larg.+/- 10mmLong .+/- 10mm

60 Kg/m3Dimensions

in mmTolerance

Larg.+/- 10mmLong .+/- 10mm

80 Kg/m3

1200

x 11

20

2150

x 1

005

mm

2400

x 1

120

C51.60Industrial processing foamA closed-cell, polymer foam designed to meet the demanding requirements of high-volume industrial sandwich part production. The unique functional surfaces based on thermoplastic bonded polyester fibres reduce resin consumption while its perforation ensures a good adhesion to the laminate. The foam has a high elongation at break and shows good impact and fatigue properties. it can be formed at room temperature to simple shapes as well as thermoformed to 3-dimensional parts. The elevated temperature resistance allows short processing cycles with (GMT) making it very suitable for mass-produced light-weight sandwich structures subjected to both stactic and dynamic loads in service.

KAPEX ® C 51.60Closed cells PU foam

Temperature resistance up to 140°CEasely formable

ImputrescibleUsable with prepregs

Thermal insulationHigh fatigue resistance

HEREX ® C 71 ETCrosslinked PVC foam - High temperature processes

HEREX ® C 71 ETRigid closed cells PVC foam

ImputrescibleSelf extinguishing

Service temperature up to 120°CExcellent thermal insulator

Page 36

References

DensityStandard

Thicknessin mm

Panelper box

Panelper box

Panelper box

Panelper box

tolerance(+/- 0,5 mm)

3 (1) 30

5 25 30

8 25 25

10 25 24 40

12 20 20 33 15

15 17 16 26 12

20 13 12 20 8

25 10 10 16 6

30 8 8 5

35 7

40 6 6 5

50 5 5

(1) : Tolerance of thickness for the 3 mm + 0,8 / -0,2 mm* R 63.50 & R63.140 : Available on order onlyPerforations : Fee of € HT / sq.m (Diameter 3 mm spaced out by 5 cms)The following products are obtained by bonding and are not thermoformable, tolerance on thickness +/- 1 mm :

- R 63.80 in 40 and 50 mm- R 63.140 in 25, 30 and 40 mm

Smaller tolerance on thickness + 0,2 / -0,4 mm price standard or contoured version + 0,1 / -0,2 mm price standard or contoured version

R 63.50 * R 63.80 R 63.140 *60 Kg /m3 90 Kg /m3 140 Kg /m3

2700

x 1

200

Standard Contoured Standard

1200

x 5

20

2400

x 1

050

Dimensionsin mm

Tolerance Larg.+/- 5mmLeng .+/- 5mm

Dimensionsin mm


Dimensionsin mm


3100 x 1400

3000

x 1

350

2900

x 1

300

Dimensionsin mm


AIREX ® R 63 Linear PVC

Page 37

References C 70.48 C 70.55 C 70.75 C 70.90 C 70.130 C 70.200 C 70.250 Colour Blue Light green Yellow Green Brownish red Petrol blue

40 48 60 80 100 130 200 2501425 x 1330 1365 x 1270 1225 x 1150 1500x1080 or 2180x1020 2050 x 950 1900 x 850 1600 x 750 1500 x 700

Tolerance on larg. & leng. Surface 1,895 m2 1,62 or 2,22 m2 1,948 m2 1,615 m2 1,200 m2 1,050 m2

2850 x 1330 2730 x 1270 2450 x 1150 1500x1080 or 2180x1020 2050 x 950 1900 x 850 1600 x 750 1500 x 700

Tolerance on larg. & leng. Surface 3,791 1,62 or 2,22 m2 1,948 m2 1,615 m2 1,200 m2 1,050 m2

1200 x 690 1200 x 660 1140 x 600 1080x510 or 1080x480 930 x 510Tolerance on larg. & leng.

Surface 0,828 m2 0,792 m2 0,684 0,55 or 0,52 m2 0,474 m2

Thickness

tolerance per box Standard Grid pattern Standard Grid pattern Standard Standard Grid pattern Standard Grid pattern(+/-0,5 mm) Standard Grid pattern 3 mm (1) 50 4 mm 50 5 mm 50 120 6 mm 40 8 mm 30 75 10 mm 25 60 12 mm 20 50 15 mm 16 40 20 mm 12 30 25 mm 10 24 30 mm 8 20 40 mm 6 50 mm 5 60 mm 4 70 mm 3 80 mm 3

BLANKS 84 mm 80 mm 78 mm 72 mm 68 mm 58 mm 48 mm 47 mmtolerance 3(+/-2 mm) 4

5(1) Tolerance on thickness (+0,8/-0,2 mm) (2) Dimension of sheet 930 x 1020 mmGrid pattern = Sheet made of 30 x 30 mm square, bonded onto a glass fabric, exist with smaller square of 15 x 15 mm (Net price + 13%)For other thicknesses or dimensions, consult us.Smaller tolerance on thickness + 0,2 / -0,4 mm prix version standard ou damier

+ 0,1 / -0,2 mm prix version standard ou damier

+/- 10 mmDim.(mm) of sheet for thickness till 8mm

+/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm

C 70.40Beige Green

Density (Kg / m3)

1,74 m2 1.41 m2

Dim. (mm)of sheet for thickness over 8mm

+/- 10 mm

+/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm +/- 10 mm3,47 m2 2.82 m2

Dimensions (mm) of grid pattern sheet+/- 5 mm

Number of sheet

Standard Standard

+/- 5 mm +/- 5 mm +/- 5 mm +/- 5 mm

Standard

AIREX ® C 70Crosslink PVC

Rigid close cell PVC foamNegligeable wate absorbtion.

Excellent thermal insulator

(2)(2)

Page 38

STANDARD

Reference

Dim 2180 x 1020 mm

C 70.75 Microperforated80 kg / m3Density

25 mm

Thickness

20 mm15 mm10 mm

MICROPERF, Infusion, Vaccum High performance microperforated foam core

MICROPERF / INFUSION / VACCUMMicroperforated cross linked PVC foam,

High infusion performances,Ease of vaccum application,

improves degassing on hot and cold processes,Reduces print through, increases shear strength and

compression mechanical properties.

For other thicknesses and densities, consult us.

MICROPERFORATION can be provided for all ALCAN/AIREX core materials

Page 39

References

Density

Thicknessin mm

(+/- 0,5 mm)

Panelsper box

Dim.in mm

Panelsper box

Dim.in mm

5 100 72

8 64 44

10 48 36

12 42 28

15 32 24

20 24 16

25 20 12

30 16 8

40 32 32

50 24 24

100 12 12(1) Exist in SCRIM version

References

Density

Thicknessin mm

(+/- 0,5 mm)

Panelsper box

Dim.in mm

Panelsper box

Dim.in mm

Panelsper box

Dim.in mm

5 100 72 40

8 64 44 24

10 48 36 20

12 42 28 16

15 32 24 12

20 24 16 12

25 20 12 8

30 16 8 8

40 32 32 32

50 24 24 24

100 12 12 12

(1) Exist in SCRIM version

Tolerances :

Thickness +/- 0,5 mm

Width +/- 10 mm

Length +/- 10 mm

1220

x 6

10

Standard

T 90.150 (1)

150 Kg /m3

Standard

1220

x 6

10

T 90.100 (1)

110 Kg /m3

105 Kg /m3 115 Kg /m3 135 Kg /m3

T 92.100 (1) T 92.110 (1) T 92.130 (1)

Standard Standard Standard

1220

x 6

10

1220

x 6

10

1220

x 6

10

Mousse thermoplastique à cellules fermées.

Closed-cell, thermoplastic structural foam designed for use with all resin systems and processing technologies. AIREX® T92’s production process creates a structural core with extremely consistent properties. The greatly improved shear elongation / damage tolerance make T92 suitable for the majority of structural composite applications. The foam is easily machined and thermoformed, very thermally stable. This allowsthe use with many different prepreg systems and in a number of elevated temperature applications. It is highly resistant to chemicals, does not absorb water and has no after expansion.

AIREX ® T 92 Easy processing structural foam

Closed-cell, thermoplastic structural foam designed for use with all resin systems and processing technologies. T90’s production process creates a structural core with extremely consistent properties. It is easy to ma-chine and thermoform and suitable for a wide range of structural com-posites applications due to advantageous properties especially com-pression strength and modulus. Outstanding high temperature stability and excellent fire resistance make T90 highly suitable where high FSt-requirements are needed. The foam is chemically stable, UV-resistant and does not absorb water. It is thermally stable during high temperature processing and post curing, with not after expansion.Superior FST - Properties (FAR25.853; NF16.101; DIN5510)

(1) (1)

(1) (1) (1)

AIREX ® T 90 Easy processing structural foam

Page 40

Reference AIREX R 82.110Density 110 Kg/cubic.m

Dimensions 2300 x 1000 mmSurface 2,30 m2

Thickness

3 mm 20 5 mm 15 8 mm 12 10 mm 10 12 mm 8 15 mm 6 20 mm 4 25 mm 4 30 mm 340 mm 350 mm 260 mm 2

Net prices for one panel, for bigger quantities, consult us.

Tolerance of thickness :For the 3 mm + 0.8 / - 0,2 mmOther thickness +/- 0,5 mm

Tolerances length : + / - 10 mmTolerances width : + / - 10 mm

Pan

els

per b

ox

AIREX R 82.6060 Kg/cubic.m

2800 x 13503,78 m2

AIREX R 82.8080 Kg/cubic.m

2700 x 12003,24 m2

AIREX ® R 82Fire resistant (M1 F1)High performance thermoplastic foam

AIREX ® R 82Thermoplastic foam

ResilienteImputrescible

ThermoformableClosed cells

Low water absorptionExcellente dielectric propertiesUsable from -194°C to + 180°C

Fire resistance:Aviation FAR 25

Train M1 F1, S4 - SR2 - ST2

Page 41

Applications : Apart from contrary convention written by us, the offers, markets or orders are ruled without exception by the selling conditions hereunder, that are applicable despite the documents coming from our customers.

Orders : The orders placed by our customers are engaging us only if they are subject to a written acceptance from us.

Prices :Our price list do not constitute an definitive offer. It can beNet price of the kitalways invoiced with the current price list at delivery time. Our prices are net and ex-works.

Payments : The customers not having an account registred in our data will have to pay before expedition.For the customers having an account, payments will be done 30 days from date of invoice, apart from an agreement written by us. All amount not payed before the due date will involve the payment of a delay penalty of 2% per month. This penalty will not need any preliminary formal demand. The non payment beforethe due date will involve the due of the complete amount still due and the suspension of the deliveries.

Deliveries : We deliver usually on stock without delay obligation. The expeditions, even carriage paid, travel at customer's risk, that should verify the goods when delivered. In case of damage or loss happenedduring the transport, it is incumbent on the consignee to exert all the appeal against the transport companies,according to articles 105 and 106 of the Commercial Law.The claims concerning the quality and the quantity of the goods should be done within the three days after delivery.We do not send samples for trials and do not accept the return of the goods apart from mistake from us or preliminary agreement.We are not responsable for damages or accidents that can be caused by the products we sell or their use.

Taking back : Apart from delivery mistake from us, will not be accepted: the products delivered since since more than 30 days, the products opened or cut, the specific orders (colours, dimensions,…).A systematic loss in value of the products will be done and credit cost will be invoiced.The cost of transport for the return of the goods will be chargeable to the customer.

Warranty : The warranty we give against manufacturing defects involves only the replacement of products recognized as defective.We reserve the right to modify our products in terms of supplying, packaging or price. This without obligation for us to modify evenly the products ordered previously.

Retention of title clause: SICOMIN reserves the property of the goods delivered tillcomplete receipt of the amount due (including the acessories).Nevertheless, the risks happening after expedition are chargeable to the buyer. It will be possible for him to use these goods in the context of normal implementation in its factory. This authorization is taken out from him with a full right, when the first incident of payment occures, without preliminary formal demand. Therefore, SICOMIN will be able to claim the goods still being in possession by the purchaser,until the payment will be completely acheived, even in case of collective proceedings ortemporary suspension of proceedings. All amount paid in advance stays acquired by way of indemnity. The purchaser commit himself to make arrangements to let the goods individualized as SICOMIN's property

Applicable right:In case of lawsuit, the french law is applicable and the commercial tribunal of Aix-en-Provenceis the only one competent however the means of payment, the delivery conditions, even in case of call up warranty or severalty of the defendants.This reserve will not allows the customer to cancel its order, this possibility being reserved to the seller.The orders are accepted exclusively under the above conditions, in case of variations made by the customer,to the initial stipulations, our company is considered involved only in case of a new formal agreement on behalf of us

All general or particular disposition appearing on commercial or accountant documents of the customerthat would be contrary to the present general sale terms are reputable null and non written.

SALE CONDITIONS

SICOMIN Catalog

Documents

Transcript of SICOMIN Catalog