Shyamal resume
-
Upload
shyamal-satodia -
Category
Engineering
-
view
89 -
download
0
Transcript of Shyamal resume
SHYAMAL M. SATODIA 220 Elm St., Apt#522, Clemson, SC-29631 Phone:-+14073948382 E-mail:- [email protected]
Education:
Clemson University- Clemson, SC
Masters of Science (Mechanical Engineering) Dec-2015
GPA-3.52/4.0
Skills:
Six Sigma Green Belt, Solidworks, MS-Office, AutoCAD, Inventor, Baan ERP
Gujarat Technological University- Ahmedabad, India
Bachelor of Engineering (Mechanical Engineering) June-2013 CGPA- 8.06/10.00
Engineering Experience:
Manufacturing Intern, Dish Networks-Spartanburg, SC May 2015 - July 2015
Design And Manufacture of Fixtures for Process Improvement in Broadband Area
Designed and fabricated fixtures for 3 workstations in Broadband area bringing down the
manual time by 54 % ensuring safe operation
Graduate Projects Design & Analysis of a Wind-Turbine Gear Box Aug 2014-Dec 2014
Designed Gear box for a 1.7 mW GE Turbine with a speed ratio of 86 right from material
selection to final assembly
Analysed various systems like gears, shafts, bearings, keyways etc. to identify the failure
Sr. Engineer, Larsen & Toubro Limited -Vadodara, Gujarat, India July 2013- June 2014
Ammonia Converter Basket for Jiangsu Linggu Chemical Company –China at L&T ltd.
(140 MT sub 30 Mt. long and 2.8 Mt. dia.)
Estimated Man-hour, subcontracted work, planned resources, monitored the project
Prepared cutting layouts of 156 plates for more than 6000 components inventory
Reduced man-hours by 11.2 % by bringing changes in existing design
Internals of Catofin Reactor for Enterprise Products Partners L.P.-Texas (USA) at L&T
ltd. (200 Mt reactor)
Conducted NDT tests for various assemblies followed by dispatch
Undergraduate research
Gujarat Technological University- Ahmedabad, Gujarat, India May-2013
Fabricated a “Hybrid Two-Wheeler” fully funded by the institute
Wrote proposal for the project, identified vendors for the parts, built testing set-up etc.
Improved efficiency and reduced pollution from vehicle with a cost benefit of 44.68% with just
35% utilisation of the available funds
Graduate Courses:
Finite Element Methods
Advanced Design Methodologies
Micro Fabrication
Six Sigma Quality
Material Selection in Engg. Design
Automotive Manufacturing Process 1
Leadership:
Branch co-ordinator of Indian Society for Technical Education (ISTE) Jul 2011- May-2012
Actively volunteered in 97th National ISTE Conference August-2011
Attended seminars on Non- Destructive Testing, Powder Metallurgy and Advanced Composites
Languages:
English, German Language (A1)