Shenzhen Powerlink Electronic Technology -Fiber Media Converter

8
ShenzhenPowerlinkElectronic Technology Fiber Media onverter

Transcript of Shenzhen Powerlink Electronic Technology -Fiber Media Converter

Page 1: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 1/8

Shenzhen Powerlink Electronic

Technology Fiber Media onverter

Page 2: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 2/8

2 Ports XFP to XFP 10G OEO Converter Transponder w/full 3R

Support Standalone

Features

10G Transparent Transponders for Ethernet, SDH ,Fiber Channel, OTN, digital video, others.

3R Repeater/Regenaration with FEC(Reed-

Solomon Algorithms) for SDH, Ethernet and Fibre

Channel.

Support DWDM/CWDM transceivers

Configurable operation mode.

Multiple chassis versions: 1RU and 2RU chassis

with 2 slots and with 17 slots.

Compact chassis design.

Redundant and modular power supplies. AC and

DC. In-service replaceable.

Modular filter and fan unit. In-service replaceable.

Powerful Network Management function Web,

SNMP, Console, others

10G OEO Converter Standalone

Page 3: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 3/8

10GBASE-T Ethernet Media Converter SFP Port

Features

Support Jumbo Frame

Transparent Transport and very low delay

Support ITUT prescribed DWDM/CWDM

wavelength

Support DMI function for SFP+ fiber module

Support Loopback test function

Economic In-band Management function

 powerful Network Management function(Web

,SNMP,Console etc.)

Support hot plugging

Support 2U Rack (16 channel) and standalone

use

Full State Led displayEasy installation

UTP cable length detection(only RJ45

interface)

Page 4: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 4/8

Fiber optic Ethernet Media Converter a Pair of 10/100/1000M Single

Fiber 1310/1550nm 20km

Features

AutoCross™

: Automatically detects and configures the twisted pair port on theconverter to the correct MDI or MDI-X configuration.

Link Pass Through: Link Pass Through is a troubleshooting feature that allows the

media converter to monitor both the fiber and copper RX ports for loss of signal.

Automatic Link Restoration: The media converters will automatically re-establish

link in all network conditions.

Selectable speed setting: The converter can be set to 10Mbps or 100Mbps or 1000Mbps. Both copper and fiber ports are automatically set to the same speed.

Devices connect to duplex mode of link partner.

Jumbo Frames is available for the 10/100/1000M media converter with 1 RJ45 port +

1 fiber po

Page 5: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 5/8

Fiber optic Ethernet Media Converter 10/100M Dual Fiber Multimode

850nm 550m

Features

AutoCross™: Automatically detects and

configures the twisted pair port on the

converter to the correct MDI or MDI-X

configuration.

Link Pass Through: Link Pass Through is a

troubleshooting feature that allows the media

converter to monitor both the fiber and copper 

RX ports for loss of signal.

Automatic Link Restoration: The medio

converters will automatically re-establish link in all network conditions.

Selectable speed setting: The converter can

 be set to 10Mbps or 100Mbps. Both copper and

fiber ports are automatically set to the same

speed. Devices connect to duplex mode of link  partner.

Page 6: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 6/8

Gigabit Fiber Media Converter 1000Base Dual Fiber Multi mode

850nm 550m

Features

AutoCross™: Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.

Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media

converter to monitor both the fiber and copper RX ports for loss of signal.

Automatic Link Restoration: The media converters will automatically re-establish link inall network conditions.

Page 7: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 7/8

1000Base 1SFP 1RJ45 Ports Gigabit SFP Fiber Media Converter

Features

One SFP ports and one SFP sockets ,It can convert Optical-Electric Ethernet signals

 between 1000M UTP ports and 1000M optical fiber ports and switch Ethernet signals

 between port and port.

Auto negotiation function supports UTP ports to auto 1000M and Full Duplex/Half Duplex.

Broadcast storm protection

Supports VLAN and QoS

Supports the max 1536 bytes frame

Small power consumption (3W), low heat, good stabilit

Page 8: Shenzhen Powerlink Electronic Technology -Fiber Media Converter

7/25/2019 Shenzhen Powerlink Electronic Technology -Fiber Media Converter

http://slidepdf.com/reader/full/shenzhenpowerlinkelectronic-technology-fiber-media-converter 8/8

www.powerlinksz.com

Tel:86-755-33160443

Fax:86-755-22142476

E-mail:[email protected]

Address:35 Building,HaiTian industrial park

,PingDi Town,LongGang,ShenZhen,China