DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7701 Process Yellow are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Process Yellow 77

7701 Yellow

13527

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

48Gloss (60°)Density 1.40

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7702 Process Rubine are the intense color shade and superior print graphics. For higher dishwasher resistance use 7731 HP Fade Resistant Rubine.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Process Rubine 77

7702 Red

12524.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

40Gloss (60°)Density 1.72

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++-/+-

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7703 Process Blue are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Process Blue 77

7703 Blue

10022.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

47Gloss (60°)Density 1.96

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium UV Curable Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7704 Process Black has a deep, blue-shade tone with pigmentation based on a carbon black / alkalai blue toner combination. Note: For food container applications requiring Steam Retort or Freezer resistance please substitute RH7734998 Fade Resistant Black.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Process Black 77

7704 Black

10520.5

++++++

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

34Gloss (60°)Density 1.82

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

-/+-/+-+-/+

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7705 Opaque White offers good coverage and opacity over a variety of colored and clear substrates. Note: 7705 Opaque White can also be blended with basic colors.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Opaque White 77

7705 White

14527.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

23Gloss (60°)Density N/A

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7706 Ultra Opaque White is our highest opacity white and offers the best coverage over a wide variety of colored and clear substrates. This product can also be blended with basic colors.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Ultra Opaque White 77

7706 White

13517

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

25Gloss (60°)Density N/A

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium UV Curable Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7707 Ultra Dense Black has a deep, blue-shade tone with pigmentation based on a carbon black / alkalai blue toner combination. Note: For food container applications requiring Steam Retort or Freezer resistance please substitute RH7734998 Fade Resistant Black.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Ultra Dense Black 77

7707 Black

10523.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

34Gloss (60°)Density 1.82

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

-/+-/+-+-/+

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7710 Yellow are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Yellow 77

7710 Yellow

13527

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

48Gloss (60°)Density 1.40

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7711 Fade Resistant Yellow are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Fade Resistant Yellow 77

7711 Yellow

9025.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

44Gloss (60°)Density 1.08

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

5

+-/+-/+++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7720 Warm Red are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Warm Red 77

7720 Red

10524

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

36Gloss (60°)Density 1.40

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7721 HP Fade Resistant Warm Red are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

HP Fade Resistant Warm Red 77

7721 Red

13522.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

34Gloss (60°)Density 1.29

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

6

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7730 Rubine Red are the intense color shade and superior print graphics. For higher dishwasher resistance use 7731 HP Fade Resistant Rubine.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Rubine Red 77

7730 Red

12524.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

40Gloss (60°)Density 1.72

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++-/+-

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7731 HP Fade Resistant Rubine are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

HP Fade Resistant Rubine 77

7731 Red

11523.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

27Gloss (60°)Density 1.54

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

5

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7740 Rhodamine Red are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Rhodamine Red 77

7740 Red

8522

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

35Gloss (60°)Density 1.38

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

3

+ND++-/+

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

-/+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7741 Fade Resistant Rhodamine are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Fade Resistant Rhodamine 77

7741 Red

10522.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

30Gloss (60°)Density 1.32

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

5

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7750 Purple are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Purple 77

7750 Purple

9022.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

40Gloss (60°)Density 1.60

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

3

+ND++-/+

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

-/+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7751 Fade Resistant Purple are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Fade Resistant Purple 77

7751 Purple

14021.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

25Gloss (60°)Density 1.35

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

6

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7755 Violet are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Violet 77

7755 Violet

11524

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

35Gloss (60°)Density 1.56

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

6

+-/+-/+++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7760 Reflex Blue are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Reflex Blue 77

7760 Blue

11023

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

40Gloss (60°)Density 1.83

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

7

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7770 Process Blue are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Process Blue 77

7770 Blue

10023.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

44Gloss (60°)Density 1.96

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7780 Green are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Green 77

7780 Green

9524.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

38Gloss (60°)Density 1.50

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 7790 Mixing Black are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Mixing Black 77

7790 Black

10525.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

39Gloss (60°)Density 1.75

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

8

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. 7795 Transparent White can be used in unlimited quantities to adjust color strength and printability.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

Transparent White 77

7795 Extender

11523.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

N/AGloss (60°)Density N/A

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

ND

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77012 012 Yellow are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

012 Yellow 77

77012 Yellow

13526.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

49Gloss (60°)Density 1.38

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77021 021 Orange are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

021 Orange 77

77021 Orange

11023.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

36Gloss (60°)Density 1.87

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

3

+++++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_1010

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed containers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77032 032 Red are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

032 Red 77

77032 Red

11024.5

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4725 Jefferson Davis Highway - Richmond, Virginia 23234 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

38Gloss (60°)Density 1.38

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

4

++-/+-/+-

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.

DryOffset_TECHSHEET_0311

TECHNICAL DATA

*CONEG *TSCA *DSL/NDSL *ASTM F963*EN71-3 *HMIS

Viscosity (20°C – Pa.s) Tack (1200 RPM/60 sec., 90° F)

Description:

Formula Code:

INTRODUCTIONThe 77 SERIES is a premium high-performance UV Dry Offset system formulated for high speed printing of cups, tubes, lids, buckets and other preformed continers. The ink film exhibits a high degree of cure which allows for excellent adhesion, durability and resistance properties. Among the desirable printing characteristics of 77072 072 Blue are the intense color shade, low dot-gain and superior print graphics.

BENEFITS• Low odor • High speeds • Enhanced adhesion • Benzophenone/4-Methyl Benzophenone free • Bisphenol A free • High intensity pigmentation • Free radical chemistry • High press stability • High transparency/ high gloss • Low VOC content • Not overprintable

SUBSTRATES- Polypropylene (PP) - Polyethylene (HDPE & LDPE) - Polyethylene Terephthalate (PET, APET) - Acrylonitrile-Butadiene Stryrene Copolymer

(ABS) - Polystyrene (PS) - Polyvinyl Chloride (PVC) - Suitable for injection or thermoformed plastic

containers STORAGEStore in a cool environment in an enclosed container. Do not expose to direct light for long periods of time. We recommend a storing temperature range of 68°F-86°F (20°C-30°C) and not to exceed 95°F (35°C). If inks are stored properly we warrant this product is usable for six months past date of delivery.

Series:

Color:

CHARACTERISTICS

PRODUCT COMPLIANCE

072 Blue 77

77072 Blue

11024.0

+++++2-1-2

The statements made here are according to our present knowledge. They do not absolve the user from his or her own responsibility to ascertain that our product is suitable for their process. No legal implication should be derived from our statements, since explicit guarantees with respect to product performance are neither expressed nor implied. Currently existing laws and regulations should be observed by the consignees of our products at their own risk.

Corporate Headquarters - Zeller+Gmelin Corporation 4801 Audubon Drive - Richmond, Virginia 23231 Phone: 800-84UV INK - 804-275-8486 - Fax: 804-275-8638 uvinks@zeller-gmelin.com - www.zeller-gmelin.com

40Gloss (60°)Density 1.45

Fade Resistance Blue Wool Scale*Water Fastness (20°C)*Water Fastness (100°C)*Process Sterilization(120°C)*Lactic Acid*Alkali

PIGMENT FASTNESS DATA

6

+-/+-/+++

Suitable +, Testing Recommended -/+, Unsuitable -, No Data ND *Test method reference: NPIRI Raw Materials Data Handbook, Vol. 4 - Pigments

+*Oils/Fats/Greases

*Our products are not approved for direct food contact applications.