SG-500 LINEAR AMPLIFIERsgcworld.com/Publications/Brochures/500brochure.pdf · The SG-500 500W...

1
Copyright 2006 (SGC reserves the right to change prices, specifications and release dates without notice.) SG-500 LINEAR AMPLIFIER 1.6 - 24MHz (To 30MHz Export ) 50 - 90W Auto, 150W Max 500W PEP, 250W Carrier Max Fully automatic +14 VDC 10 -18.5 VDC 40A Avg./SSB, 90A Peak/CW Convection standard, opt. fan kit 10 milliseconds nominal 15 milliseconds nominal Via PTT line (or RF sense Export) Input overdrive, under voltage - adjustable (factory set to 10VDC) VSWR, frequency, over current, over temperature LED bank fault indicator -35 to +70 degrees C SSB/CW/RTTY/SITOR/ALE/SSTV AM at 250W 11.5 x 12.25 x 6(9.75 w/ fan) 21 pounds Aluminum casting - matte black HF frequency range: Power input range: Power output: Band switching DC input voltage: DC operating range: Input current: Cooling: TX/RCV switch time: Band switch time: Keying: Protection: Built-in testing: Operating temperature: Supported modes: Size(inches): Weight: Case Construction: Specifications SG-500 Cat. # 52-96 The SG-500 500W linear amplifier is ideal for high power operation in your base station or mobile installation. The SG-500 is micro- processor controlled. It automatically monitors your power needs and selects the right broadband filter. It also has the most advanced self- protection on the market, providing maximum reliability and unattended operation. For maximum power, under the most demanding conditions, the SmartPowerCube is the professional's choice. The SmartPowerCube TM : Brawn AND Brains. Everything you need for 500 Watts. The optional continuous operation fan kit for the SG-500 allows the user to operate at 500W PEP or CW under high stress conditions. It is brushless and is activated automatically when heatsink or ambient temperature exceed 50 degrees C, allowing 24 hour operation. The remote control permits convenient operation of the SG-500 amp and includes an ON/OFF switch with LED DC power indicator. Supplied with 20 feet of control cable. The PS-50 is a direct rectified power supply for 115/230 VAC, 50/60Hz designed for the SG-500. For operation up to 500W PEP. DC power cable not included. Use two PS-50s for 500W CW output with the SG-500. Visit www.sgcworld.com, email [email protected], or contact your dealer for information on all SGC products. SGC, 13737 SE 26th Street, Bellevue, WA 98005 USA

Transcript of SG-500 LINEAR AMPLIFIERsgcworld.com/Publications/Brochures/500brochure.pdf · The SG-500 500W...

  • Co

    pyr

    igh

    t 20

    06 (

    SGC

    res

    erve

    s th

    e ri

    gh

    t to

    ch

    ang

    e p

    rice

    s, s

    pec

    ific

    atio

    ns

    and

    rel

    ease

    dat

    es w

    ith

    ou

    t n

    oti

    ce.)

    SG-500 LINEAR AMPLIFIER

    1.6 - 24MHz (To 30MHz Export )50 - 90W Auto, 150W Max500W PEP, 250W Carrier MaxFully automatic+14 VDC10 -18.5 VDC40A Avg./SSB, 90A Peak/CW Convection standard, opt. fan kit10 milliseconds nominal15 milliseconds nominalVia PTT line (or RF sense Export)Input overdrive, under voltage -adjustable (factory set to 10VDC)VSWR, frequency, over current, over temperatureLED bank fault indicator-35 to +70 degrees CSSB/CW/RTTY/SITOR/ALE/SSTVAM at 250W11.5 x 12.25 x 6(9.75 w/ fan)21 poundsAluminum casting - matte black

    HF frequency range: Power input range:Power output:Band switchingDC input voltage:DC operating range:Input current:Cooling:TX/RCV switch time:Band switch time:Keying:Protection:

    Built-in testing:Operating temperature:Supported modes:

    Size(inches):Weight:Case Construction:

    Specifications

    SG-500 Cat. # 52-96

    The SG-500 500W linear amplifier is ideal for high power operation in your base station or mobile installation. The SG-500 is micro-processor controlled. It automatically monitors your power needs and selects the right broadband filter. It also has the most advanced self-protection on the market, providing maximum reliability and unattended operation. For maximum power, under the most demanding conditions, the SmartPowerCube is the professional's choice.

    The SmartPowerCubeTM: Brawn AND Brains.

    Everything you need for 500 Watts.

    The optional continuous operation fan kit for the SG-500 allows the user to operate at 500W PEP or CW under high stress conditions. It is brushless and is activated automatically when heatsink or ambient temperature exceed 50 degrees C, allowing 24 hour operation.

    The remote control permits convenient operation of the SG-500 amp and includes an ON/OFF switch with LED DC power indicator. Supplied with 20 feet of control cable.

    The PS-50 is a direct rectified power supply for 115/230 VAC, 50/60Hz designed for the SG-500. For operation up to 500W PEP.DC power cable not included. Use two PS-50s for 500W CW output with the SG-500.

    Visit www.sgcworld.com, email [email protected], orcontact your dealer for information on all SGC products.SGC, 13737 SE 26th Street, Bellevue, WA 98005 USA