Setup Guide - PestPac Softwaresupport.pestpac.com/documents/PestPac Mobile App 3.x IPM...The...
Transcript of Setup Guide - PestPac Softwaresupport.pestpac.com/documents/PestPac Mobile App 3.x IPM...The...
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
PestPac Mobile 3.x IPM Desktop Setup
The Integrated Pest Management (IPM) module allows technicians to complete detailed
inspection information, including area-specific material applications, device inspections,
and deficiency conditions and actions. The inspection information for each area will then
be noted for reporting and tracking purposes.
After following the desktop setup instructions, please refer to the PestPac Mobile App 3.x IPM Usage document for technician usage information.
This document covers the following:
• Access and Printing Setup
• Setting Up Areas
• Setting Up Devices
• Setting Up Pest Activity Options
• Setting Up Conditions
• Setting Up Materials
Access and Printing Setup
Configuring Access Templates
You should have configured Access Templates in the initial setup. If you have not
completed that part of the setup, please refer to the PestPac Mobile 3.x App Initial Setup document for instructions.
Setting Up IPM Technicians
You should have configured your technicians in the initial setup. If you have not
completed that part of the setup, please refer to the PestPac Mobile 3.x App Initial Setup document for instructions.
Please note that the difference in setup for IPM technicians is that there will be a
checkbox enabled for IPM that you will need to check.
Once that is checked, that technician will be able to access IPM via the Mobile app.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Printer Setup IPM-Specific Options
You should have configured your Printer Setup in the initial setup. If you have not
completed that part of the setup, please refer to the PestPac Mobile 3.x App Initial Setup document for instructions.
Please note that all items under Print Sections except for Material Applications are
specifically tied to the usage of the IPM module.
Setting Up Areas
Areas can be setup on the desktop as well as on the mobile app by the technician. This
document covers desktop setup only.
From the desktop, you can create area treemaps that allow technicians to indicate that
they have inspected an area as well as note material applications, pest findings, and
conditions within each respective area.
Please note that there are three area treemap setup options:
● Location Templates
● Copying a treemap from another location
● Building a treemap on a location from scratch
You can use any one of these options or a combination of all three.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Location Templates Overview
A Location Template allows you to create a generic treemap that can be applied to
multiple different types of locations. The types of Location Templates that you will set
up will vary based upon the services you offer, the types of locations you service, and the
areas that you will need to indicate you have treated.
A Location Template can be applied to a location manually on an individual basis as well
as applied in mass to already-existing locations through the Data Update Utility.
Once a Location Template has been applied to a Location, additional areas can be added
manually on the desktop or via the PestPac Mobile App. From the desktop, you will be
able to deactivate any unnecessary areas that were added from the template as needed.
Example 1: Commercial Template
Example 2: Generic Residential Template
Example 3: Generic Restaurant Template
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Creating Location Templates
To create a Location Template, complete the following steps:
1. On the desktop, go to Menu > Settings > Lookup Tables.
2. Under Additional Lookup Tables, click the Location Templates link.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
3. Click the Add Template button at the top-right of the screen.
4. Complete the name and description for that template; click the Save button.
5. Click the blue Add Area link to begin adding areas.
6. Title is the main item required on this screen. Note that this will show on your
Inspection Reports for the customer.
Description, Type, and Barcode will only show when viewing on the desktop.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
7. Click the Save button and continue adding areas and subareas to build your
template.
Applying a Location Template on a Location
If you have one generic template that you would like pre-assigned to ALL locations,
complete the following steps:
1. On the desktop, go to Menu > Settings > Company Setup.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
2. Go to the Defaults for New Account section to select the Location Template you
would like to assign; click the Save button.
If you are adding a new location and want to associate a Location Template, complete
the following steps:
• From the Add Location screen, complete the location information, edit / assign
the Location Template you would like associated with the new service location,
and click the Add button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Applying Location Templates to Multiple Accounts
To apply a Location Template to multiple accounts, complete the following steps:
1. Use Location Search to create the list of accounts to which you want to apply a
Location Template, and click the magnifying glass Search button at the top-right
of the screen.
2. To create a new list, click the Add to List button.
3. Enter a List Name, choose Dynamic (for the list to update each time you run it)
or Static (for the list to always remain the same), select the Date Ranges; click
the OK button in the popup window.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
4. Scroll to the bottom of the List Management screen and click Apply Location
Templates.
5. Select the Location Template to Apply from the drop-down menu, and check
whether you want to Deactivate Existing Location Areas or Exclude Accounts with this Template.
6. To the right side of every account on the list, there is an Apply box that will be
checked. Uncheck any accounts to which you do NOT want to apply the Location
Template.
Note that if there are more than 100 accounts on the list, there will be a Next 100 Records button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
7. Click Apply Template at the top when done.
8. You will see a popup that asks you if you want to apply the Location Template to
all selected accounts on all pages; click the OK button.
Copying a Treemap from Another Location
If you are manually applying a Location Template to a single existing Location, complete
the following steps:
1. From a customer’s Location Detail screen, scroll down to the bottom of the
screen and click the Areas & Devices button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
2. Click the Tools button at the top-right of the screen.
3. In the popup menu, click the Import Areas option.
4. If you want to use one of the Location Templates you have created, select that
button. If you would like to copy from another location, select that button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
5. Click the Select button to bring up the list of templates / locations.
6. Select from the list, and click the OK button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
7. Click the Next button in the top-right of the popup.
8. Check the box where you want to place the Area, and click the Finish button at
the top-right of the popup.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Building a Treemap on a Location from Scratch
If you are building a treemap on a Location, complete the following steps:
1. From a customer’s Location Detail screen, scroll down to the bottom of the
screen and click the Areas & Devices button.
2. Click the Edit button on the top-right of the screen, and right-click the Location.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
3. Click Add Area item in the popup menu.
4. Continue to add areas and subareas, and click the Done button.
Setting Up Devices
The IPM module allows you to complete device inspections/ You will need to set up the
types of Devices your company will use as well as any specific questions technicians will
need to answer when completing a device inspection.
To set up Devices, complete the following steps:
1. From a customer’s Location Detail screen, scroll down to the bottom of the
screen and click the Areas & Devices button.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
2. Click the blue Expand All link.
3. Click the Edit button on the top-right of the screen.
4. To add one device at a time:
a. Right-click the area to which you are adding devices.
b. Click the Add Device item.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
c. Enter the Device Name, Type, and Barcode. If you do not have a barcode,
enter the devices from the mobile app instead.
d. Click the Done button at the top-right portion of the screen.
e. Right-clicking a device name once it is added allows you to edit the
Device, Device Detail, or Deactivate.
5. To add multiple devices at the same time:
a. Click the Tools button in the top-right portion of the screen.
b. In the popup menu, click the Add Multiple Devices option.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
c. Select the New Device Type you are adding. Note that the dropdown list
pulls from the Device Type lookup table.
d. Fill in the appropriate information alongside the area to which you are
adding the devices. If you do not have the names or barcodes, you can
always add them from the mobile app or edit on the desktop later.
e. Click the Save button in the top-right portion of the screen when finished.
Setting Up Pest Activity Options
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
If your technicians will enter any Pest Activity when completing services on the app, you
will need to set up your Targets and Target Evidence Types on the desktop by
completing the following steps:
1. On the desktop, go to Menu > Settings > Lookup Tables.
2. Under Material Lookup Tables, click the Target Evidence Types link.
Note that you should set up these evidence types before setting up your Targets
(pests) since those Targets have Evidence Types fields that pull from this lookup
table.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
3. Click the Add Target Evidence Type button at the top-right corner of the screen.
4. You can set up what you would consider to be types of Pest Evidence from which
the technician can select (e.g., webbing present, chewed items present, drag
marks present, molting present).
5. Click the Add button at the top-right of the screen to finish adding the target.
6. Under Material Lookup Tables, click the Targets link.
7. Click the Add Target button at the top-right corner of the screen.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
8. You can set up any of the Target pest options you would like a technician to
indicate that he has either captured and/or observed. Setting up Targets will also
allow you to specify the target pest for which you are treating when adding
specific Materials.
9. Click the Add button at the top-right of the screen to finish adding the target.
Setting Up Conditions
Turning on the Conditions Module
This module can be turned on by completing the following steps:
1. On the desktop, go to Menu > Settings > Company Setup.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
2. Under Additional Features, check the Use Conditions Module checkbox.
Setting Up Lookup Tables
The Lookup Tables for Conditions have their own section. To access them, complete the
following steps:
1. On the desktop, go to Menu > Settings > Lookup Tables.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
2. Click any of the blue links for the specific table you need to populate. In each
Lookup Table, you can add the appropriate name and description.
The recommended order for completing these Lookup Tables is:
1. Condition Details
2. Corrective Actions
3. Conditions
4. Condition Groups (Please note that you must assign Conditions to Groups for
those Conditions to be available in the group.)
* The Condition Area Types lookup table should only be used with Classic Mobile.
The table below outlines the Conditions-related tables along with the information related
to each one.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Lookup Table Content Fields
Condition Details Specify details about what the Condition is
Example: If the Condition is that the
dumpster lid has been left open, the Details
may be “Dumpster lid was noted as open.
This can lead to conditions conducive to
rodent activity in the area.”
Condition Detail and Description
Corrective Actions Specify ways in which the customer can
resolve the Condition
Example: Keep dumpster lid closed when
not in use.
Corrective Action and Description
Conditions Create Conditions (shortened version of
Condition Details) and assign specific values
to the fields that will default every time the
specific Condition is added to an account
Condition, Group, Category,
Condition Detail, Corrective Action,
Severity, and Responsibility
Condition Groups Specify where the Condition is occurring
(helps limit the number of options through
which techs must sort on Mobile)
Examples: kitchen, bathroom, dumpster
Code, Description, and Potential
Conditions
Adding a Condition to a Location
To add a Condition to a Location, complete the following steps:
1. From a customer’s Location Detail screen, scroll down to the bottom of the
screen and click the Conditions button.
2. Click the + button at the top-right of the screen.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
3. On the Condition Details screen, choose the Area, Condition, Type, Category,
Condition Detail, Corrective Action, Severity, Responsibility, and Status. You can
also check the Add a comment box to enter a comment.
Note that once a Condition is selected, all the fields will automatically fill in with
the default information from the Conditions Lookup Table. Note that if there is no
default for any fields on the screen, the specific item can be selected by clicking
the blue link next to the field, via dropdown, or freely typing in these fields.
4. Click the Add button at the bottom-right of the screen.
5. The Condition will then be added to the Conditions List screen.
If you click the Down arrow next to the Condition, the item will expand to show
more detail and allow you to edit or resolve the Condition.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
Clicking the Printer button will generate a separate tab in your browser with a
Conditions report.
Setting Up Materials
If your technicians will be entering Material information when completing services on the
app, you will need to set up your Materials on the desktop by completing the following
steps:
1. On the desktop, go to Menu > Settings > Lookup Tables.
2. Under Material Lookup Tables, click the Materials link.
Setup Guide
Return to Top Copyright 2017, WorkWave LLC. All rights reserved. v.28SEP2017
For full training on setting up your Materials, please reference the Material Setup
document and Materials video available under the Training link in PestPac.