SETTING THE STANDARD - James Heal · - Phenolic Yellowing - Print Durability - Rubbing - Washing -...
Transcript of SETTING THE STANDARD - James Heal · - Phenolic Yellowing - Print Durability - Rubbing - Washing -...
SETTING THE STANDARD
CONTENTS
PAGE 1 AREAS OF TESTING EXPERTISEPAGE 2-3 ELMATEARPAGE 4-5 MARTINDALEPAGE 6-7 TITANPAGE 8-9 TRUBURSTPAGE 10-11 TRUFADEPAGE 12 TEST MATERIALSPAGE 13 SERVICE AND CALIBRATION TECHNICAL ASSISTANCE
We are committed to forming close relationships and have established numerous partnerships within the textile industry, from trade and standards organisations, to test houses, customers and distribution partners.
With a heritage spanning almost a century and a half, we have evolved and grown through a culture of continuous improvement,
resulting in a thorough understanding of the applications, operating conditions and requirements of customers worldwide – from independent testing laboratories and test houses, to fabric suppliers, manufacturers and retailers.
Using knowledge and expertise, we consistently set the industry standard through product innovation
and technology, with customer and user needs, present and future, driving our technological advancements. You can be assured that with James Heal, you will always receive the highest levels of product quality and customer service. We have Agents and Distribution partners all over the globe, ensuring locally available product whenever, and wherever you need it.
Setting the Standard
AT JAMES HEAL, wE ARE DEDICATED TO DESIGNING AND DEVELOPING
HIGH PRECISION TESTING INSTRUMENTS AND TEST MATERIALS
FOR PHySICAL AND COLOUR FASTNESS TESTING. OUR wORLDwIDE
SERVICE AND CALIBRATION DIVISION AND EXPERT TECHNICAL
ASSISTANCE COMPLEMENT OUR PRODUCT RANGE, ADDING REAL
VALUE TO yOUR LABORATORy TESTING ACTIVITIES.
“COMBINING EXPERTISE WITH INNOVATION TO CREATE
EXTRAORDINARY TESTING SOLUTIONS”
1
AREAS OF TESTINGEXPERTISETextile: Colour Fastness- Chlorinated Water- Dry Cleaning- Dry Heat- Hot Pressing- Laundering- Light
- Perspiration- Phenolic Yellowing- Print Durability- Rubbing- Washing- Water
Textile: Physical- Abrasion- Bursting Strength- Compression and Puncture- Crease and Wrinkle Recovery- Crimp- Drape- Durability- Flammability- Mass per unit area- Pilling
- Security of Attachments- Seam Slippage- Shrinkage- Snagging- Spray Rating- Stretch and Recovery- Surface Deterioration- Tear Strength- Tensile Strength- Washing and Drying
Non-Textile- Bursting strength of nonwovens, plastics, paper and
medical products
- Microscratching of laminates, wooden, painted, automotive and high gloss surfaces
- Physical and colour fastness testing of leather
- Rubbing fastness of laminates and wooden surfaces
- Tear strength of paper and plastics
ELMATEARDIGITAL TEAR TESTER
2
ELMATEAR2 IS A POwERFUL AND VERSATILE INSTRUMENT,
wHICH HAS BEEN EXTENSIVELy RE-DESIGNED wITH
CONTEMPORARy STyLING AND A wIDE RANGE OF NEw
FEATURES wHICH OFFER REAL BENEFITS: VALUE, ACCURACy,
SAFETy AND FLEXIBILITy.
Elmatear- Everything you need to start testing: Pendulum Weights (A-D), Check Weights and Specimen Preparation Templates are included
- Increase capacity: with optional Pendulum Weight Kit (E)
- User friendly software: no calculations required, statistical analysis of results and optional PC Software Package available
- Fool proof operation: automatic level compensation, automatic pendulum weight detection, automatic zeroing and visible and audible indicators
- Built-in safety: no finger traps, two handed release of pendulum and automatic arrest of pendulum
- Quick and easy clamping: innovative rotary cam lock jaws and interchangeable jaw faces with Pendulum Weight Kit (E)
Service and Calibration
TechnicalAssistance
Applications
- Worldwide Service- ISO 17025 Calibration Service- 18 Months’ Warranty
- Applications Support- Engineering Support- Operator Training- Knowledge Transfer
- Textiles- Nonwovens- Paper- Board- Plastic
3
Textile Paper
Nonwovens
STANDARDS
TECHNICALDATA
ASTM D 1424
DIN 53862
EN ISO 13937-1
ISO 4674-2
ISO 9290
M&S P29
NEXT 17
NF G07-149
ASTM D 1922
GB/T 11999
ISO 6383-2
JIS K 7128-2
NF T54 141
ASTM D 5734
WSP 100.1
APPITA P 400
ASTM D 689
BS 4468
CSA D9
DIN 53128
EN 21974
GB/T 455
ISO 1974
JIS P 8116
PAPTAC D9
SCAN P11
SNV 198482
TAPPI T414
UNI 6444
Standard Pendulum Weights (A-D) 8N, 16N, 32N, 64N
Optional Pendulum Weight (E) 128N
Units of Measurement N, cN, mN, kgf, gf, lbf, ozf
Number of Specimens (Plies) 1 to 16
Maximum Specimen Thickness 5mm
Cut Length 15 - 20mm
Blade Titanium nitride coated
Calibration Check Check Weights for each Pendulum
Weight 57kg
Dimensions 400 x 500 x 550mm
Power Supply 85 - 264VAC 50/60Hz 60W
Warranty 18 Months
Plastics
4
MARTINDALEABRASION AND PILLING TESTER
OUR INNOVATIVE PRODUCT DESIGN TEAM HAS SET A NEw
STANDARD wITH THE NEXT GENERATION MARTINDALE 900 SERIES.
FLEXIBLE, THE SERIES INCLUDES THREE MODELS, FULLy
POPULATED wITH NINE, FIVE OR TwO STATIONS. EACH COMBINE
THE BEST IN STyLE, qUALITy, AFFORDABILITy AND FUNCTIONALITy
– INTRODUCING USERS TO THE NEXT LEVEL IN ABRASION AND
PILLING TESTING.
Martindale- James Heal’s unique product signature- Exquisite attention to user needs- Constructed from light weight, hard wearing materials- Unobstructed access to all test stations- Versatile and intuitive control panel- Optional voice prompts- Tool-free change between motions- Comprehensive range of sample holding options- Complies with all known standards for testing on
Martindale
Service and Calibration
TechnicalAssistance
TestMaterials
- Worldwide Service- UKAS (ISO 17025 based) Accredited Calibration Service
- 18 Months’ Warranty
- Applications Support- Engineering Support- Operator Training- Knowledge Transfer
- ISO 12947-1 Abrasive Cloth (SM25)- M&S Nonwoven Felt- ISO 12947-1 Woven Felt- ISO 12947-1 Polyurethane Foam- Range of Abradants for specialised tests
5
Scope
No. of specimens
Exposed area of test specimen
Working pressure on test specimen
Rotational speed
Total stroke of drive units
Parallelism of top plate toabrading tables
Parallelism of sample holders to abrading tables
AbrasionWoven, knitted & certain nonwoven fabrics
2, 5 or 9
6.45cm2
9 kPa (apparel)12 kPa (upholstery)
47.5 ± 2.5rpm
60.5 ± 0.5mm
PillingWoven & knitted fabrics (staple spun yarns)
2, 5 or 9
64.5cm2
2.5 cN/cm2 (knitteds)6.5 cN/cm2 (wovens)
47.5 ± 2.5rpm
24.0 ± 0.5mm
Sock AbrasionAll fibrecompositions& all end uses
2, 5 or 9
3.14cm2
23.86 kPa
47.5 ± 2.5rpm
60.5 ± 0.5mm
< 0.05mm < 0.05mm < 0.05mm
< 0.05mm < 0.05mm < 0.05mm
STANDARDS
TECHNICALDATA
Fabric Abrasion Fabric Pilling Sock Abrasion
EN ISO 12947
EN ISO 12945 - 2
ASTM D4966 (Abrasion)
ASTM D4970 (Pilling)
JIS L 1096
EN 13770
ISO 17704
EN 13520
EN 14605
EN 14325
EN 943
EN 388
ISO 5470 - 2
SN 198529 and SN 198525
IS 12673
M&S P17, P18 and P19
Next 18 and 26
and many others
Leather Abrasion(Ball Plate)
Edge Abrasion(Line Contact)
Scratch Resistance
APPLICATIONS
AND TOOLING
6
TITANUNIVERSAL STRENGTH TESTER
TITAN4 IS AN OUTSTANDING, FOURTH GENERATION
UNIVERSAL STRENGTH TESTER, DESIGNED SPECIFICALLy
FOR TESTING TEXTILES, NONwOVENS AND LEATHER IN
VARIOUS FORMS: yARNS, FABRICS, GARMENTS AND SECURITy
OF ATTACHMENTS.
INNOVATIVE ENGINEERING AND INTUITIVE UNDERSTANDING
OF yOUR NEEDS ARE COMBINED TO PRODUCE AN
AESTHETICALLy PLEASING AND ERGONOMIC INSTRUMENT,
wITH INTELLIGENT, EASy-TO-USE TESTwISE TEST ANALySIS
SOFTwARE, AN EXTENSIVE RANGE OF SPECIMEN GRIPS AND
A COMPREHENSIVE LIBRARy OF INTERNATIONAL STANDARDS
AND RETAILERS’ OwN TEST METHODS.
Titan4
- Compact, desk top, standards-compliant Universal Strength Tester
- Operates as standard in both tension and compression- Extensive range of tool-free, interchangeable specimen grips- Choice of three load cells - up to 3000N (approx 300kg): load cells supplied in cartridge form to improve protection and to facilitate safe handling and storage
TestWise Test Analysis Software- Microsoft Windows look and feel and familiar industry specific terminology
- Single Software Package for yarn, leather, fabric and nonwovens: tensile strength, seam slippage, security of attachments, button strength, pile loop extraction, tear strength, peel bond (delamination), stretch and recovery (cyclic), ball burst, puncture and crushing
- Extensive library of pre-loaded, national and international standards and of retailers’ test methods
- ‘Standards Editor’ making it easy to modify existing standards or create new methods
- Automatic setting of test parameters (including gauge length) after selection of required standard or method
- ‘Three Clicks’ to start testing!
Service and Calibration
TechnicalAssistance
- Worldwide Service- UKAS (ISO 17025 based) Accredited Calibration Service (tension and/or compression)
- 18 Months’ Warranty
- Operator Training- Knowledge transfer- TestWise Software On-Line Maintenance and User Support
- Engineering Support
7
Fabric Strength
16 CFR 1500.53 Para (f)
AATCC-ASTM TS-010
AATCC-ASTM TS-015
ASTM D5034
ASTM D5034
BS 3424 Part 33 Method 36
BS 3424 Part 4 Method 6
DIN 53858
EN ISO 13934-1
EN ISO 13934-2
EN ISO 1421 Method 1
EN ISO 1421 Method 2
ISO 5081
ISO 5082
ISO 9073-3
M&S P11
NEXT© TM 27
NF G 35-107 Method B
RSG 1
Seam Strength andSeam Slippage
ASTM D1683
ASTM D4034
ASTM D434
BS 3320
DIN 53868
EN ISO 13935-1
EN ISO 13935-2
EN ISO 13936-1
EN ISO 13936-2
EN ISO 13936-3
IWS TM 117
M&S P12
M&S P12A
M&S P12B
NEXT© TM 16
NEXT© TM 16a
RSG 2
RSG 3
Stretch andRecovery / Cyclic
adidas 4-27
ASTM D4964
ASTM D6614
BHS 15J
BS 4952
Calida Bodywear Test No. 21
Decathlon DS-275
DUPONT TTM 076
EN 14704-1
EN 14704-3 - Method A
Limited Brands LTD03
M&S P14
M&S P14A
M&S P14B
M&S P15 Part 1
M&S P15A
M&S P15B
NEXT© TM 21
NEXT© TM 21a
RSG 5
RSG 4
RSG 6
SIS 65 00 68
Tear Strength
AS 2001-2.10
ASTM D2261
ASTM D5587
ASTM D5735
BS 3424 Part 5 Method 7A
BS 3424 Part 5 Method 7B
BS 3424 Part 5 Method 7C
BS 4303
DIN 53859 Part 2
DIN 53859 Part 5
DUPONT TTM 035
EN ISO 4674-1 – Method A
EN ISO 4674-1 – Method B
EN ISO 9073-4
EN ISO 13937-2
EN ISO 13937-3
EN ISO 13937-4
M&S P35
M&S P98
SIS 25 12 31
NEXT© TM 25
SELECTION OF
STANDARDS
TECHNICALDATA
Measuring Principle Constant Rate of Extension (CRE)
Capacity (Tension & Compression) 3000N, 3kN, 300kgf and 670lbf
Load Cells3000N, 600N and 120NQuick-change cartridge, auto-recognition “S” beam cells
Test / Return / Jog Speed 1 - 2000mm/min
Accuracy of Load Cells Class 0.5 (±0.5%) from 2 - 100% of load cell capacity
Speed Accuracy ± 0.005%
Maximum Stroke 660mm
Total Vertical Space 885mm
Positional Accuracy ± 0.00125mm
Calibration
Safety
Load cells: ISO 7500-1 (UKAS accredited) and ASTM E4 Instrument: ISO 7500-1 and ASTM D76
CE marked (complies with Machinery, Low Voltage and EMC Directives)
8
TRUBURSTBURSTING STRENGTH AND FATIGUE TESTER
TRUBURST3 IS A FULLy PNEUMATIC BURSTING AND
3D FATIGUE TESTER, wHICH COMFORTABLy EXCEEDS
THE EXACTING REqUIREMENTS OF ISO 13938-2,
ASTM D3786 AND OF MANy OTHER NATIONAL AND
INTERNATIONAL STANDARDS.
THE INHERENT FLEXIBILITy OF TRUBURST3 GIVES
IT THE CAPABILITy TO TEST A BROAD RANGE OF
MATERIALS INCLUDING TEXTILES, NONwOVENS,
PAPER, BOARD, PLASTICS AND MEDICAL PRODUCTS.
TruBurst- Pneumatic: clean, efficient and safe- Non-contact laser distension measurement: accurate results- Automatic diaphragm correction: improves precision- Adjustable clamping pressure: avoids slippage or specimen
damage- Automatic burst detect system: sensitive and reliable- Illuminated viewing area: easily view tests in progress- Automatic recognition of test dome: tool free change over accelerates testing and reduces downtime
- Intuitive software: for experienced and inexperienced users- Test method configuration: save up to 50 of your own- Cyclic software: cycle up to 500 times to a pressure or distension
- Dual Control Model: approved by Marks & Spencer and adidas
Applications
Service and Calibration
TechnicalAssistance
- Worldwide Service- UKAS (ISO 17025 based) Accredited Calibration Service
- 18 Months’ Warranty
- Applications Support- Engineering Support- Operator Training- Knowledge Transfer
Textiles
Nonwovens
Paper
Plastics
Medical
- Knitted and woven apparel- Technical textiles
- Wet wipes- Surgical gowns and masks- Staple, spun laid and air-laid
- Kitchen paper- Toilet paper- Diverse paper products
- Food packaging- Bin liners- Sacks- Various plastic products
- Organ patches- Hernia patches- Wound dressings- Artificial arteries- Animal skin- Artificial skin- Blister packs- Mosquito nets
9
SPECIMEN
SIZEArea
7.3cm2
7.8cm2
10cm2
50cm2
100cm2
Diameter
30.5mm
31.5mm
35.7mm
79.8mm
112.8mm
Maximum Distension
30mm
30mm
30mm
70mm
70mm
ISO 13938-2
ASTM D3786
Woolmark TM29
Edana 80.3
WSP 30.2
NEXT Test Method 22
M&S P27
adidas 4.09
ISO 2758 (paper)
TECHNICALDATA
Upper Pressure Limit
Resolution
kPa
100
0.02
psi
14.5
0.004
kg/cm2
1.019
0.0002
bar
1
0.0002
kN/m2
100
0.02
Pressure Range - TruBurst3 Model 801
Resolution
Upper Pressure Limit
Resolution
kPa
1000
0.2
psi
145
0.04
kg/cm2
10.20
0.002
bar
10
0.002
kN/m2
1000
0.2
Pressure Range - TruBurst3 Model 810 and Model 810/DC (Dual Control)
Resolution
Minimum
Resolution
Resolution
mm
0.1
70.0
0.1
cm
0.01
7.00
0.01
inches
0.001
2.756
0.001
Distension Range
Maximum
Resolution
STANDARDS
10
TRUFADELIGHT FASTNESS TESTER
TRUFADE TRULy REVOLUTIONISES LABORATORy
LIGHT FASTNESS TESTING. JAMES HEAL HAS
COMBINED yEARS OF ACCUMULATED ENGINEERING
AND APPLICATIONS EXPERTISE TO CREATE A LIGHT
FASTNESS TESTER wHICH STREAMLINES AND
SIMPLIFIES A DIFFICULT AREA OF COLOUR
FASTNESS TESTING.
EVERy FUNCTION OF TRUFADE HAS BEEN CAREFULLy
DESIGNED wITH THE USER IN MIND. TRUFADE IS
wHOLLy STANDARDS COMPLIANT AND DELIVERS
ACCURATE AND RELIABLE RESULTS EVERy TIME!
TruFade- High performance, air-cooled xenon lamp- Interchangeable filter systems for switching between ISO
and AATCC standards- Blue Wool and Controlled Irradiance operating modes- SolarSens Radiometer incorporating Black Standard Thermometer (BST)
- Up to 27 sample holder faces giving a total exposure area of 1640cm2
- Exceptionally low running costs- Complies with international standards for testing textiles
and leather- Compact, highly ergonomic and stylish design
Test Chamber- Wide opening and at arms level offering comfortable access- Bright LED internal chamber lighting (illuminates when door
is open)- Spacious design facilitating easy loading/unloading of specimen holders
- Close control of chamber temperature and humidity- Turntable for up to 9 triangular Specimen Holders or for 8 Specimen Holders and SolarSens (used in Controlled Irradiance mode)
- Interchangeable optical filter systems: replaceable infra-red filters (ISO) and non-ageing filters (AATCC)
Service and Calibration
TechnicalAssistance
TestMaterials
- Worldwide Service- ISO 17025 Calibration Service- 18 Months’ Warranty
- Applications Support- Engineering Support- Operator Training- Knowledge Transfer
- ISO Blue Wool Standards (in pieces or pre-mounted strips on cards)
- AATCC Blue Wool Standards (“L” series)
- ISO Humidity Test Control Fabric (Red Azoic)
- OBA-free Specimen Mounting Card- ISO Grey Scale for assessing Change in Colour
- AATCC Gray Scale for Change in Color
STANDARDS
TECHNICALDATA
Standards (pre-programmed)
Lamp
ISO 105-B02 & AATCC 16
2200W air-cooled xenon
Total Exposure Area
Test Positions
Exposure Area of each Test Position
Irradiance Monitoring System
Irradiance (300-400nm) Range
Test Chamber Humidity Range
Test Chamber Temperature Range
Black Standard Temperature Range
Water Reservoir Capacity
Water Consumption (ISO 105-B02 Normal)
Colour Touch Screen
Chamber Viewing Window
Ethernet Connection
1640cm2
27 maximum
60.75cm2 (135 x 45mm)
SolarSens (Radiometer)
40 - 50 W/m2
Ambient - 95%RH
Ambient - 95ºC
40 - 65ºC
27 litres
0.5 - 1.5 l/h
Supplied as standard
Supplied as standard
Supplied as standard
ISO 105-B02 IUF 402
AATCC 16 SLF 402
INSTALLATIONDATA
Dimensions (approx.)
Weight (approx.)
Electrical Supply
Water
Recommended Ambient Temperature Range
Recommended Ambient Humidity Range
720 (width) x 680 (depth) x 1200 (height) mm
240kg
Single phase 230V ±15% (3kW) 50/60Hz
Pure (ISO 3696 Grade 3)
16 - 24ºC
30 - 65%RH (non-condensing)
11
TEST MATERIALS
wE SUPPLy ALL THE TEST AND REFERENCE MATERIALS REqUIRED FOR PHySICAL AND COLOUR FASTNESS TESTING
MAJOR PRODUCT LINES:
- BLUE wOOL STANDARDS (COLOUR FASTNESS TO LIGHT)
- COTTON LAwN (CROCKING CLOTH)
- DETERGENTS
- GREy SCALES
- MAKEwEIGHTS (LOADING FABRICS OR BALLAST)
- MARKING PENS (PERMANENT AND TEMPORARy MARKING)
- MARTINDALE TEST MATERIALS
- MULTIFIBRE Dw
- NICKEL SCREENING KIT
- yELLOwING TEST KIT
James Heal manufacture and supply Test and Reference Materials of unrivalled quality, which are totally compliant with the relevant standards and specifications.
We have been manufacturing Testing Instruments for more than 100 years and utilise the same accumulated technical expertise and uncompromising attention to detail in the development and production of Test Materials.
Furthermore, we possess a unique understanding of the critical relationship between Instruments and Test Materials
and strive constantly to improve that interface.
Test and Reference Materials are manufactured in a purpose-built Test Materials Centre, containing state-of-the-art facilities for warping, weaving, inspection, cutting and sewing, as well as for physical, colour fastness and chemical testing.
Two modern laboratories, working within a stringent and no compromise quality system, check systematically every batch of product. Quality and consistency are also assured by the
use of independent UKAS-accredited Test Houses and by carrying out carefully selected performance tests.
We have a zero tolerance to non-conformance and product is not released unless it is fully compliant.
Certificates to demonstrate conformity of our Test and Reference Materials are available and without additional cost.
Our range contains all the test and reference materials required for physical and colour fastness testing.
12
SERVICE AND CALIBRATION
INSTALLATION SERVICEWe would like you to obtain full benefit and an excellent return on your purchase of a James Heal instrument, so we offer an optional installation service. Our team will unpack, position and connect your new equipment to the relevant services.
COMMISSIONING SERVICEIf you feel that your personnel need training to get the best out of your new equipment, our installation engineers are able to provide basic training. More advanced training is available through our Technical Assistance Service.
BREAKDOwN SERVICEExperienced and skilled instrument technicians are available, at very short notice, to visit your Company, in any part of the world, to deal with emergency breakdowns and to restore rapidly your equipment to full operating condition.
CONTRACTUAL MAINTENANCEWe recommend regular, planned maintenance for your instruments, to preserve their value and to maintain their accuracy and reliability. Attractive rates and priority treatment are accorded to contract clients.
CALIBRATION SERVICESOur calibration services are based on ISO 17025. Many of our calibration procedures are accredited by UKAS (United Kingdom Accreditation Service). UKAS Certificates of Calibration are recognised and accepted worldwide by accreditors and customers and are your guarantee of our competence and of the continuing accuracy of your instrumentation.
TECHNICAL ASSISTANCE
APPLICATIONS SUPPORTExperienced textile technologists identify the right instruments and the correct test materials for your application and provide on-going advice and support.
ENGINEERING SUPPORTSkilled technicians provide quick and effective help when instruments break down and get you back up and running with the least possible delay.
LABORATORyThe facilities and staff in our fully equipped, controlled environment laboratory assist you to confirm instrument selection and to resolve any correlation issues between you and your customer or supplier.
KNOwLEDGE CENTREJames Heal specialises in all aspects of fabric and colour fastness testing and qualified, knowledgeable people are available to help and to guide you through the complex world of standards, retailers’ requirements and other issues.
TRAININGWe offer training at James Heal or in your factory helping you to maximise the return on your investment.
13
Setting the Standard
TESTING INSTRUMENTSHigh precision textile testing instrumentation
TEST MATERIALSGuaranteed fit-for-purpose test materials for textiletesting procedures
SERVICE AND CALIBRATIONWorldwide installation, maintenance and calibration service
TECHNICAL ASSISTANCEExpert engineering and applications support
James Heal has Agents and Distribution Partners in over 60 countries. Please visit our website www.james-heal.co.uk
for more information and contact details for your local James Heal Agent.
James HealRichmond worksHalifax HX3 6EPEngland
Tel +44 (0) 1422 366355Fax +44 (0) 1422 352440Email [email protected] www.james-heal.co.uk
A world wide presence
AGENT
The right is reserved to alter the specification or modify the appearance without notice. © James HealTM 2012 ENGLISHV212