Setting io - Somfyservice.somfy.com/downloads/setgo/qsg_set-go_v4_en.pdf · Roller shutter bedroom1...
Transcript of Setting io - Somfyservice.somfy.com/downloads/setgo/qsg_set-go_v4_en.pdf · Roller shutter bedroom1...
Here’s your guide
Setting io
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2 pair
- Set&Go io - V1.0
2 Connect the USB io receiver to your PC or notebook.
1 Download the Set & Go io application to your PC or Notebook from: www.somfypro.com/Set-Go
1 Run Set&Go io, then click on AUTOSCAN.
2 Press on the “KEY“ button of your control for 2 seconds with feedback to obtain the installation key.Repeat this operation for each remote control or io control unit in the house.
3 All motors and receivers forming your installation appear on screen.
The insTallaTion Tool for all io-homeconTrol® siTes
Your guide for success with every io
installation from a PC
Set&Go ioSet&Go io LOOK FOR THE INSTALLATION USING AUTOSCANSTEP 1
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27) << < 1 2 3 > >>
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Terrace
NOT SET
tous
SET 1W i
Sunea
3
i
Roller shutter bedroom1
SET 1W 3
add control
Sensor box (1)
Repeater (1)
! i
Sensor box
3
i
Door lock
i
Roof window
SETi
External Venetian Blind 2
Repeater
transfer
transfer
- Set&Go io - V1.0
yes no cancel
Telis 1 io
c ok
i i
Somfy 2
System
Telis Composio ioImpressario Chronis io
c ok
i i
Systeme 18 : 30
Ouvrir
Easy Sun io Keytis 4 io
Select above, the remote control transmitter to which tou want to tranfer the end-products and Click on "OK".Before selecting it, check the logo at the backside of the remote to know its type (1W or 2W). The logo printed has to fit to the one displayed with the remote on the picture above.
OK
TRANSFER EQUIPMENTS TO A REMOTE CONTROL1
cancel
- Set&Go io - V1.0 ?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2 pair
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27) << < 1 2 3 > >>
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Terrace
NOT SET
tous
SET 1W i
Sunea
3
i
Roller shutter bedroom1
SET 1W 3
add control
Sensor box (1)
Repeater (1)
! i
Sensor box
3
i
Door lock
i
Roof window
SETi
External Venetian Blind 2
Repeater
transfer
transfer
- Set&Go io - V1.0
Fin de course haut
Fin de couse bas
Sensmoteur
Mode deréglage
Fin decourse haut
Fin decourse bas
Validation
valider
REGLAGES "Roller shutter bedroom 1"
Utilisez les commandes pour réaliser votre réglage parincrément
appuimaintenu
1. Positionnez le volet roulant en fin de course bas grâceaux commandes ci-contre2. Valider le réglage en cliquant sur "valider"
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2 pair
- Set&Go io - V1.0
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2
- Set&Go io - V1.0
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2
- Set&Go io - V1.0
- Set&Go io - V1.0 ?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2
- Set&Go io - V1.0 ?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2
3 Click the “prog“ button to prompt the remote control.
1 Choose motor or receiver to be paired...
...then click the “pair“ button.
1 Identify motors or products not set (orange «NOT SET» icon)...
...then click the icon to open the setting screen.
2 Guided by the intuitive interface, carry on to make the settings:
> Select direction of rotation> Setting mode manual, semi-automatic, automatic> Upper and lower end stops manual or semi-automatic mode
ConfirmTip: At any time you can go back into the motor setting to change the parameters.
3 Repeat this operation for each motor not set.
2 Select control model you want to assign to this motor.
PAIR CONTROL UNITSSTEP 3SET EACH PRODUCT INDIVIDUALLYSTEP 2
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27) << < 1 2 3 > >>
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Terrace
NOT SET
tous
SET 1W i
Sunea
3
i
Roller shutter bedroom1
SET 1W 3
add control
Sensor box (1)
Repeater (1)
! i
Sensor box
3
i
Door lock
i
Roof window
SETi
External Venetian Blind 2
Repeater
transfer
transfer
- Set&Go io - V1.0
Roller Shutter
OK
Validate Cancel
Equipment's name: Type:
Installation firm:
Installation date:
Free information:
Somfy
Installation data
12 03 2011
R&T 2012
Day Month Year
<< < 1 2 3 4 > >> "Identify" makes your equip-
ment move to allow to identify it
Identify
Roller shutter bedroom 2Roller shutter bedroom 2
INFORMATIONS - "Roller shutter bedroom 2"
Roller shutter 1
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2 pair
- Set&Go io - V1.0
?
?
my installation
autoscan
add TaHoma
SORTINGEquipments (0-12 / 27)
SETi
Light kitchen
SET 1W i
External Venetian Blind 1
i
Roller shutter bedroom1
NOT SET
All
SET 1W i
Sunea
3
i
Terrace
SET
add control i
Door lock
i
Roof window
SETi
External Venetian Blind 2
- Set&Go io - V1.0
insTall io from a Pc...
... in a feW minUTes
Step-by-step guide to installation:
saves time on each io site.
Set&Go io guides you through each stage
of the installation. Set&Go io identifies the
io equipment installed for you, helps you
to set the parameters of each Somfy motor,
quickly pair all the controls and customise
each installation. Everything set, quickly
and clearly. You will soon wonder how
you ever managed without this tool!
...no misTaKes
Your personal assistant on your io sites.
With Set&Go io, you can’t make a mistake.
No worries if you have to break off during
the installation: Set&Go io doesn’t forget.
When you come back to the site,
everything you need to know is there
on screen. No more doubts or hesitation.
You know just where you are, and what’s
left to do. With Set&Go io, you are never
alone on site anymore!
...anD alWaYs sUccessfUl
The easiest tool for making all
your io installations a success.
With Set&Go io, you can confidently
undertake all your io assignments.
You deliver all your installations,
even the most complicated, on time
and to professional standards.
You have satisfied your customers,
and your reputation for professionalism
is enhanced.
Install io with Set&Go io: straightforward,
easy to use, it’s all you need!
Set&Go ioSet&Go io
1 Click the i icon.
3 Confirm..
2 Enter your own information in the fields provided.Tip: You can copy your information automatically to the memory of each motor. You can then recover the installation information when you return to the site.
Your installation is complete!
SIGn YOUR INSTALLATIONSTEP 4
www.somfy.com
Somfy50 avenue du Nouveau Monde
BP 152 - 74307 Cluses Cedex
France
T +33 (0)4 50 96 70 00
F +33 (0)4 50 96 71 89