Set-1
Click here to load reader
-
Upload
static-equipment-design -
Category
Documents
-
view
36 -
download
0
Transcript of Set-1
Question Paper Set-1
Time 2 Hrs
1. Define pressure and temperature as loading.
2. Define MDMT.
3. What are the loadings as per UG-22 ASME SEC VIII Div 1?
4. Write down formula for thickness calculation as per UG-27 for 2:1 ellipsoidal head and
cylindrical shell.
5. What is the difference in MAWP and MAP?
6. Write down the steps of maximum allowable external pressure calculation as per UG-28.
7. Define permissible opening requirement as per UG-36.
8.
Consider the vessel as shown in above diagram and calculate thickness of cylindrical and 2:1 ellipsoidal area. Following data are available:
i) Inside diameter: 2000 mmii) Pressure : 20 Bar (a)iii) Temperature: 100 °Civ) Material: SA516 Gr 70v) Corrosion Allowance: 3mmvi) Joint efficiency: 0.7