SERVOPRO 4100

Learn more about the SERVOPRO 4100VISIT SERVOMEX.COM

Flexible

Unrivalled performance

Benchmark compliance

EASY TO USE

Low cost of ownership

Comprehensive solution for industrial and medical gas manufacture and for pharmacopeia applications

Measures up to 4 gas streams simultaneously: O2 (control and purity), CO2, CO, N2O, CH4 and moisture

Digital communications for remote access: RS232/RS485 Modbus

Uses industry-leading, ultra-sensitive and reliable patented Paramagnetic, Gfx Infrared, SBSW Infrared, Zirconia and Ceramic Impedance sensing technologies

Effectively compensates for temperature and pressure fluctuations

Manufactured by Servomex - over 60 years’ experience innovating and pioneering gas analysis and thousands of units used in the field every year

FDA validated for medical oxygen and nitrogen production

European Pharmacopoeia compliant

Intuitive use LCD interface for easy device interaction and configuration

Up to 8 isolated analog outputs and up to 12 relays with follow or freeze options

Externally fitted ceramic impedance dew point monitoring transmitter options

Uses ultra-stable, non-depleting sensing technologies that help extend maintenance intervals

Auto-calibration function helps to reduce operational costs

SERVOPRO 4100 The 4100 is a high performing multigas analyzer designed to provide up to four simultaneous gas stream measurements of oxygen (control and purity), carbon dioxide, carbon monoxide, nitrous oxide, methane and trace moisture. Specifically designed to address the needs of industrial and medical gas manufacture, the 4100 can be fitted with a range of high specification sensing technologies – Paramagnetic, Zirconia, Gfx/SBSW Infrared and Ceramic Impedance dew point monitoring. These proven, stable sensors not only provide highly accurate measurements but offer operational flexibility in a range of industries and applications.

In addition to its considerable monitoring capabilities, the 4100 also provides engineer-friendly interaction through its intuitive LCD menu and low ongoing maintenance requirements; the non-depleting, high stable sensing technologies help extend maintenance intervals while intelligent functionality such as independent auto-calibration helps to deliver operational efficiencies over a long product life. Combined, these features and benefits make the 4100 a highly adaptable analysis solution that meets a range of needs.

PROVEN FOUR-STREAM MULTIGAS ANALYZER, OPTIMIZED FOR INDUSTRIAL AND MEDICAL GAS PRODUCTION

KEY APPLICATIONS

Product purity on air separation plant

Process control on air separation plant

Monitoring the trace CO2 on scrubbed air inlet to air separation process

Bottling/filling plant applications

ALTERNATIVE PRODUCTS

The SERVOPRO and DF-SERIES product ranges feature a number of options designed to meet your application needs.

DF-300

When you want a high grade O2 trace and ultra-trace monitoring solution, we recommend the DF-300 Series devices. E-sensor technology provides extensive background gas compatibility.

MultiExact

The next-generation digital successor to the 4100, the MultiExact offers extended sensing capabilities with TruRef sensing technology, improved features and digital communications.

MonoExact

Designed for users who prefer single-measurement analyzers, the MonoExact utilizes TruRef sensing technology, improved features and digital communications.

Flexible monitoring for air separation applicationsIf you manufacture industrial gases, medical grade O2 and N2, or need to meet Pharmacopeia standards, you need a high grade analyzer that delivers not only highly accurate and reliable measurements, but has the ability to measure a number of gas stream simultaneously. A solution that is flexible and easy to use. No matter what your application needs, you’ll want a device that can reduce your ongoing costs and provide operational efficiencies. We don’t believe you should have to compromise.

A no compromise solutionThe 4100 is specifically designed to meet a wide range of product purity and process control applications. Using technologically advanced sensing – Paramagnetic, Gfx IR, SBSW IR, zirconia and ceramic impedance (for dew point analysis) – for O2 (control and purity), CO2, CO, N2O, CH4 and moisture, the 4100 sets the standard for accuracy and reliable performance, effectively compensating for both temperate and pressure transience. This device also delivers flexible and engineer-friendly use with its integrated LCD interface and comprehensive digital communications protocols for enhanced diagnostics and statistical reporting.

Easy and intuitive to useThe 4100 delivers affordable gas analysis with low cost-of-ownership, thanks to the use of high-stability, non-depleting sensing technologies. An auto-calibration function, simplifying ongoing device care, leverage operational cost efficiencies. The flexibility offered by the 4100, means it excels in adapting to diverse application needs, providing you with a robust solution tailored to your application.

PRODUCT OVERVIEW: 4100

TECHNOLOGIES

OPTIONS DESCRIPTION SPECIFICATION

Analog inputs 2 x mA inputs Two floating 4-20mA/0-20mA supplied as standard with data valid contacts

Analog outputs 2 x isolated 4-20mA/0-20mA Supplied as standard. Additional outputs may be added

Analog output range Analog output parameters User selectable over the measurement range

Serial output RS232/RS485 (9 pin “D” connector) Provides analyzer measurement and status data

Alarms 3 x volt free single pole relays (230Vac/30Vdc at 1.0A) as standard. Additional relays may be added

Digital communications RS232/RS485 Modbus protocol –

ACCESSORIESACCESSORIES AVAILABLE FOR SPECIFIC APPLICATIONS – CONTACT YOUR LOCAL SERVOMEX BUSINESS CENTER

MONITORING PERFORMANCE

Gas O2 (purity)

O2 (control) O2 (trace) CO2

(trace)N2O

(trace)CO (trace) CH4

(trace) CO2 (%) CH4 (%) CO (%)

Technology Paramag-netic

Paramag-netic Zirconia Gfx IR Gfx IR Gfx IR Gfx IR SBSW IR SBSW IR SBSW IR

Range0-100%

max. range

0-100% max. range

0- 210,000 ppm (v)

max. range/

0-5ppm (v)

0-5/0-100 ppm

0-50/ 0-500 ppm

0-50/ 0-500 ppm

0-50/ 0-500 ppm

0.25/0.5/ 1/2.5/ 5/10/ 25/50

/100 %

0.25/0.5/ 1/2.5/ 5/10/ 25/50

/100 %

1/2.5/ 10 %

Accuracy (intrinsic error) <0.02% O2

<0.15% O2

<0.1ppm

1% of rdg or

<0.1ppm *

1% of rdg or

<0.5ppm *

1% of rdg or

<0.5ppm *

1% of rdg or

<0.5ppm *

<1% FS <1% FS <1% FS

Repeatability <0.01% O2

<0.1% O2 <0.1 ppm

1% of rdg or

<0.1ppm *

1% of rdg or

<0.5ppm *

1% of rdg or

<0.5ppm *

1% of rdg or

<0.5ppm *

<1% FS <1% FS <1% FS

Zero drift/week <0.01% O2

<0.05% O2

<1% of reading or 250ppb*

0.2ppm 1ppm 1ppm 1ppm <2% FS <2% FS <2% FS

T90 in secs<12

@200ml/min

<15 @200ml/

min

<15 @400ml/

min

<20 @2000ml/

min

<20 @2000ml/

min

<20 @2000ml/

min

<20 @2000ml/

min

<20 @200ml/

min

<20 @200ml/

min

<20 @200ml/

min

*Whichever is the greater.

PRODUCT DATA: 4100

Please note: This document was updated in August 2014. While every effort has been made to ensure accuracy, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards and guidelines. This document is not intended to form the basis of a contract.

These analyzers are not intended for any form of use on humans and are not medical devices as described in the Medical Devices Directive 93/42EEC.

Size:

483mm (19”) Wide x 133mm (4.6”) High x 478mm (18.8”) or 608mm (23.9”) Deep

Weight:

< 22kg (48.4lb)

Operating temperature:

5°C - 40°C/41°F - 104°F

Certifications:

EN 61010-3: Safety requirements for electrical equipment for measurement, control and laboratory use

EN 61326-1: Electrical equipment for measurement, control and laboratory use

EMC requirements (all induced errors are less than the intrinsic error, with the exception of: O2 purity: <0.05% O2 O2 trace: <2% of reading)

Installation Category II rated in accordance with IEC664

DEVICE SPECIFICATION DEVICE SCHEMATIC

SAMPLE FOR MEASUREMENTS

Sample for measurement Sample must be oil free, non-corrosive, non-condensing and non-flammable

Pressure driven 5psig (35kPa) ±3psig (21kPa)

Flow driven 100-2500ml/min depending on measurement

PB41

00 R

ev.0

Dat

e: 0

8/14

PRODUCT DATA: 4100

Servomex has a policy of constant product improvement and reserves the right to change specifications without notice. © Servomex Group Limited. 2014. A Spectris company. All rights reserved.

AMERICAS BUSINESS CENTERTel: +1 281 295 5800Email: americas_sales@servomex.com

ASIA PACIFIC BUSINESS CENTRETel: +86 (0)21 6489 7570Email: asia_sales@servomex.com

EUROPEAN BUSINESS CENTRETel: +31 (0) 79 330 1580Email: europe_sales@servomex.com

LATIN AMERICA BUSINESS CENTERTel: +55 11 5188 8166Email: brazil_sales@servomex.com

INDIA BUSINESS CENTRETel: +91 22 3934 2700Email: MEI_sales@servomex.com

MIDDLE EAST BUSINESS CENTRETel: +971 6552 8073Email: MEI_sales@servomex.com