Services and Capabilities - Functional Safety · • PHA, HAZOP, HAZAN, HAZID and CHAZOP studies....
Transcript of Services and Capabilities - Functional Safety · • PHA, HAZOP, HAZAN, HAZID and CHAZOP studies....
Presented by Functional Safety Engineering Services
Services and Capabilities
IntroductionOur Story
3
Our Story
Functional Safety Enginereing Services Ltd. (FSES) was established in response to the much
needed conformance to the international standards IEC 61508 for Electrical/Electronic and
Programmable Electronic Safety Related Systems and its derivatives IEC 61511, IEC 61513,
IEC 61505 etc.
Our mission has always been to be the number one global functional safety consultancy,
delivering services to various industries where compliance is required.
We have come a long way since our establishment, delivering large Quantitative Risk
Assessments in Saudi Arabia, Process Hazard Assessment workshops in various countries in
the Middle East and technical consultancy services globally.
With experience gained working with (and as) end users, Engineering Procurement and
Construction (EPC) companies and system integrators. FSCL has the underpinning knowledge
of Functional Safety standards and has gained significant experience in its application;
subsequently we are competent in providing practical solutions that emphasis the application of
appropriate level of rigour.
Our solutions and services are tried and tested, implemented by major operators in the process
industry and accepted by regulating bodies including the Health and Safety Executive (HSE).
The Safe
Way
Is the
Best Way
Who We Are
6
Who are We & Why Us?
Functional Safety Engineering Services are an engineering
consultancy company built on experience and expertise in the
field of functional safety.
Our consultants are able to support clients in the functional
safety aspects of the processes, systems and equipment for
the oil and gas, petrochemical, utilities (including green
technologies), military and manufacturing industries.
• TÜV Functional Safety Engineers
• Quality focused through ISO 9001 Management Systems
• Functional Safety Management Experts
• Globally Established Consultants
7
Meet our Team
Peter Hall Martin Snow Amir Akhlaghi Mohammed BhaimiaManaging Director Commercial Director Engineering Director Senior Consultant
IndustriesWhere We Work
Industries
9
Oil & Gas Upstream
• Offshore Platforms
• Drilling
• Wellheads
Oil & Gas Downstream
• Gas Treatment Plants
• Tank Farms
• LPG Storage & Distribution
• Compressor Stations
• LNG Processing Plants
Process
• Gas & Oil Separation Plants
• Gas Plants
• Petrochemicals
Power Generation
• Hydroelectric Power
• Wind Farms
Water & Waste Water
• Water & Waste Water Plants
• De-Sanitation Plants
• Reservoirs
• Pumping Stations
Green Technology
• Wind Farms
• Solar Powered Generation
• Hydro Power Generation
• Bio-Fuels
Our ServicesWhat we do
Process Hazard Analysis (PHA)
11
FSES can provide experienced facilitators for:
• PHA, HAZOP, HAZAN, HAZID and CHAZOP studies.
FSES can conduct the study at various phases of the
facility, including:
• Conceptual Engineering
• Pre-FEED
• FEED
• Detailed Design
• EPC
FSES can conduct the study for various industries,
including (but not limited to):
• Oil and Gas
• Process
• Machinery
Including HAZOP, HAZID, HAZAN and CHAZOP
SIL Determination
12
FSES can provide experienced facilitators for SIL
Determination studies, using:
• LOPA and Risk Graph methodologies.
FSES can provide the following consultancy services:
• Fault Tree Analysis
• ALARP Calculations
• Determining Appropriate Risk Criteria
• Cost Benefit Analysis
FSES can conduct the study for various industries,
including (but not limited to):
• Oil and Gas
• Process
• Water and Waste Water Treatment
• Pharmaceuticals
Including LOPA, FTA and Risk Graph
SIL Verification
13
FSES can conduct SIL Verification studies, using:
• Reliability Block Diagrams and FTA.
FSES can provide the following consultancy services:
• Construction of RBD’s / Fault Trees
• Failure Modes Effects and Criticality Analysis
(FMECA)
• Hardware Reliability
• Systematic Capability
• Architectural Constraints
FSES can conduct the study for various functions, including
(but not limited to):
• ESD Functions
• F&G Functions
• HIPS Functions
Including LOPA, FTA and Risk Graph
Quantitative Risk Assessment
14
A QRA is a formalized tool for assessing the risk exposure
to employees, the environment, company assets and its
reputation.
FSES can conduct QRA’s using:
• PHAST Risk and FSES In-House Tool.
A Typical FSES QRA would include the following:
• Calculation of Individual Risk Per Annum (IRPA) and
Potential Loss of Life (PLL).
• Consequence Analysis and Dispersion Modelling.
• Cost Benefit Analysis.
• Risk Frequency Calculations.
• Cumulative Risk Frequency (F-N Curves)
• Tolerable levels of risk analysis
• Risk contours (Location Specific Individual Risk
(LSIR))
Quantitative Risk Assessment
15
Typical QRA Lifecycle
Value Improvement Engineering
16
FSES are able to conduct Value Improvement Engineering
(VIP) Studies to assess the following:
• Classes of Facility Quality
• Customizing standards and specifications
• Design for Maintainability
• Design to Capacity
• Energy Optimization
• Process Simplifications Assessment
• Reliability Simulations Modelling
• Reliability Centered Maintenance (RCM)
• Reliability, Availability and Maintainability Study
(RAMS)
• Waste Minimization
Plant Life Extension
17
FSES are able to provide specialist studies on safety,
reliability and optimization of plants during their operational
lifetime, through:
• Functional Safety Audits to demonstrate ongoing
compliance
• Reliability studies (RAMS and RCM) to identify risk to
business due to asset failure
• Optimization studies to increase efficiency through
improved control and safety systems
• Human factors studies to minimize and control the
risks associated with human errors
Flow Assurance
18
FSES can conduct Static, Dynamic and Transient
Process simulations for the calculation of the Process
Safety Time, Reaction Time and to Optimize Process
Control using industry recognized tools.
Fire & Gas Systems
19
FSES provide specialist Fire & Gas System
studies including:
• F&G Philosophies
• F&G Zoning
• F&G Cause and Effects and ESD level
tie in
• Equipment Selection and Feasibility
Studies
• F&G Mapping and detector layout
optimization
Functional Safety Management
20
FSES provide specialist Functional Safety
Management Studies including:
• IEC 61508 compliance
• IEC 61511 compliance
• Compliance with relevant international
standards
• Functional Safety Audits
• Functional Safety Assessments
• Assessment of Legacy Systems
• Ability to review / setup FSM systems
• Assistance in achieving CASS
accreditations
System Capability Certification
21
FSES provide specialist certification of components and
systems using various methodologies, including:
• Failure Modes, Effects and Diagnostics Analysis
(FMEDA)
• Documentation Analysis and Review
• Prior Use Assessment
• Proven In Use Assessment
• FSES has extensive experience in providing product
safety capability assessments to the requirements of
IEC 61508 (up to and including SIL 3)
• FSES can determine the SIL capability of a product
through qualitative and quantitative methods.
Technical Consultancy
22
FSES are experts in providing control and high-integrity
safety systems solutions with extensive design and
manufacturing experience in the process and safety
industries.
FSES can provide additional support through:
• Optimum Replacements intervals
• Spares analysis
• Development of Safety Manuals
• Development of Proof Testing Procedures
• Safety Requirements Specifications
• Building Risk Assessments
• Dropped Objects Analysis
• Escape, Evacuation and Rescue Analysis
• Noise Study
Functional Safety Training
23
FSES offers training courses which can be given in-house or at
the customers site. FSES will customize training courses to meet
particular company requirements. The training programs will
provide engineers and their companies with the best way of
learning about automation reliability, availability and safety. The
company will explain standards and technologies in the design,
production or manufacture of safety-related systems.
A training course is essential if you are:
• To fully understand and apply IEC 61508/61511
• Involved in the design, production or manufacture of
safety related systems
• Responsible for determining if the standard is applicable
to your organization
• Accountable for safety management in your organization
Our PortfolioTake a look at our latest projects
Global Clients
25
10%
5%85%
26
Our Recent Clients
LTHE
OTTCOSaudi Aramco Saipem
MPCWorleyParsons
27
Hasbah Offshore Gas Facilities Increment II – EPC Safety
Studies
FSES conducted a range of safety studies for the Hasbah II facilities including:
Hasbah II
Recently CompletedHasbah Offshore Gas Facilities Increment II – Saudi Aramco | LTHE
• HAZID • Dropped Objects • EERA • QRA
• HAZOP • Fire, Explosion and Toxic
Gas Dispersion
• BRA • SRS
• Noise Study • F&G 3D Mapping • SIMOPS • SIL Assessment
Get in touchWe want to hear from you
29
Get in Touch
Head Office
Passfield Business Centre
Lynchborough Road, Hampshire
GU30 7SB, UK
Global Offices
Asia, Europe and Middle East
Our Phone
+44 1428 333 333
Email / Website
www.fses.global