SERVICE MANUAL - Xavier...

SERVICE MANUAL

Sony CorporationAudio&Video Business GroupPublished by Sony Techno Create Corporation

SPECIFICATIONS

DIGITAL MEDIA PLAYER9-889-490-012009E05-1© 2009.05

US ModelNWZ-X1051/X1061

Canadian ModelTaiwan Model

NWZ-X1060

AEP ModelUK Model

E ModelAustralian Model

Chinese ModelTourist Model

NWZ-X1050/X1060

Ver. 1.0 2009.05

NWZ-X1050/X1051/X1060/X1061

Note:Be sure to keep your PC used for service and checking of this unit always updated with the latest version of your anti-virus software.In case a virus affected unit was found during service, contact your Service Headquarters.

Supported file formatMusic (Includes podcasts)Audio Formats (Codec)

MP3 Media File format: MP3 (MPEG-1 Layer 3) file formatFile extension: .mp3Bit rate: 32 to 320 kbps (Supports variable bit rate (VBR))Sampling frequency*1: 32, 44.1, 48 kHz

WMA Media File format: ASF file formatFile extension: .wmaBit rate: 32 to 192 kbps (Supports variable bit rate (VBR))Sampling frequency*1: 44.1 kHzCompatible with WM-DRM 10

AAC-LC*2 Media File format: MP4 file formatFile extension: .mp4, .m4a, .3gpBit rate: 16 to 320 kbps (Supports variable bit rate (VBR))*3

Sampling frequency*1: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHzLinear PCM Media File format: Wave-Riff file format

File extension: .wavBit rate: 1,411 kbpsSampling frequency*1: 44.1 kHz

Video (Includes podcasts)Video Formats (Codec)

AVC(H.264/AVC)

Media File format: MP4 file format, “Memory Stick” video formatFile extension: .mp4, .m4vProfile: Baseline ProfileLevel: Up to 1.3Bit rate: Max. 768 kbpsFrame rate: Max. 30 fpsResolution: Max. QVGA (320 × 240)

MPEG-4 Media File format: MP4 file format, “Memory Stick” video formatFile extension: .mp4, .m4vProfile: Simple ProfileBit rate: Max. 2,500 kbpsFrame rate: Max. 30 fpsResolution: Max. QVGA (320 × 240)

Windows Media Video 9

Media File format: ASF file formatFile extension: .wmvProfile: VC1 simple profile, main profileBit rate: Simple profile Max. 1,700 kbps, main profile Max. 5,000 kbpsFrame rate: Max. 30 fpsResolution: Simple profile Max. 480 × 270, main profile Max. QVGA (320 × 240)

Audio Formats (Codec)

AAC-LC (for AVC, MPEG-4)

Channel number: Max. 2 channelsSampling frequency*1: 24, 32, 44.1, 48 kHzBit rate: Max. 288 kbps / channel

WMA(for Windows Media Video 9)

Bit rate: 32 to 192 kbps (Supports variable bit rate (VBR))Sampling frequency*1: 44.1 kHz

File size Max. 2 GBThe number of files Max. 2,000

Photo*4

Photo Format (Codec)

JPEG Media File format: Compatible with DCF 2.0/Exif 2.21 file formatFile extension: .jpgProfile: Baseline ProfileNumber of pixels: Max. 4,096 × 4,096 pixels

The number of files Max. 20,000

Podcast*5

The number of files Max. 20,000

*1 Sampling frequency may not correspond to all encoders.*2 Copyright protected files cannot be played back.*3 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency.*4 Some photo files cannot be played back, depending on their file formats.*5 Photo contents are not supported.

Maximum recordable number of songs and time (Approx.)The approximate times are based on the case in which you transfer or record only 4 minutes songs (not including videos and photos) in the MP3 format. Other playable audio file format song numbers and times may differ from the MP3 format.

NWZ-X1050 NWZ-X1060Bit rate Songs Time Songs Time48 kbps 10,350 690 hr. 00 min. 21,000 1,400 hr. 00 min.64 kbps 7,750 516 hr. 00 min. 15,650 1,042 hr. 20 min.128 kbps 3,850 256 hr. 00 min. 7,800 520 hr. 00 min.256 kbps 1,900 130 hr. 00 min. 3,900 260 hr. 00 min.320 kbps 1,550 102 hr. 20 min. 3,150 210 hr. 00 min.

Maximum recordable time of videos (Approx.)The approximate recordable times are estimated in the case where only videos are transferred. The time may differ, depending on the conditions under which the player is used.

NWZ-X1050 NWZ-X1060Bit rate*1 Time Time384 kbps 61 hr. 00 min. 124 hr. 30 min.768 kbps 35 hr. 00 min. 71 hr. 00 min.

*1 Bit rate of video. Bit rate of Audio is 128 kbps.

– Continued on next page –

Photo: NWZ-X1050

NWZ-X1050/X1051/X1060/X1061

2

Maximum recordable number of photos that can be transferred (Approx.)Max. 20,000Recordable number of photos may be less depending on file sizes.

Capacity (User available capacity)*1

NWZ-X1050: 16 GB (Approx. 14.6 GB = 15,775,629,312 bytes)NWZ-X1060: 32 GB (Approx. 29.6 GB = 31,871,533,056 bytes)*1 Available storage capacity of the player may vary.

A portion of the memory is used for data management functions.

Output (headphones)Frequency response20 to 20,000 Hz (when playing 44.1 kHz sampling data file, single signal measurement)

Total Noise Suppression Ratio*1

Approx. 17 dB*2

*1 Under the Sony measurement standard.*2 Equivalent to approx. 98.0% reduction of energy of sound compared with not wearing

headphones. (NC Environment: Airplane)

FM radioFM Frequency range87.5 to 108.0 MHz

IF (FM)128 kHz

AntennaHeadphone cord antenna

Wireless LANStandards: IEEE 802.11b/gCommunication range*1:

Approximately 50 m (160 ft)Modulation format: DSSS (IEEE 802.11b compliant), OFDM (IEEE 802.11g compliant)Security: WEP/WPA/WPA2*1 Communication range may vary depending on the operating conditions or settings.

InterfaceHeadphone: Stereo mini-jackWM-PORT (multiple connecting terminal): 22 pinsHi-Speed USB (USB 2.0 compliant)

Operating temperature5 °C to 35 °C (41 °F to 95 °F)

Power source Built-in rechargeable lithium-ion battery USB power (from a computer via the supplied USB cable)

Charging timeUSB-based chargingApprox. 3 hours (full charge), Approx.1.5 hours (approx. 80 %)

Battery life (continuous playback)By setting as follows, a longer battery life can be expected.The times below are approximated when “Equalizer”, “VPT (Surround)”, “DSEE(Sound Enhance)”, “Clear Stereo”, “Dynamic Normalizer”, “WLAN function On/Off” are deactivated. Furthermore, for videos, the time approximated when the brightness of the screen is set to “3.”The time below may differ depending on ambient temperature or the status of use.

With Noise Canceling function deactivated

With Noise Canceling function activated

MusicPlayback at MP3 128 kbps Approximately 33 hours Approximately 21.5 hoursPlayback at WMA 128 kbps Approximately 31 hours Approximately 21.5 hoursPlayback at AAC-LC 128 kbps Approximately 29 hours Approximately 20.5 hoursPlayback at Linear PCM 1,411 kbps Approximately 31 hours Approximately 21.5 hours

VideoPlayback at MPEG-4 768 kbps Approximately 7.5 hours Approximately 6.5 hoursPlayback at MPEG-4 384 kbps Approximately 9.0 hours Approximately 7.5 hoursPlayback at AVC Baseline 768 kbps Approximately 7.5 hours Approximately 6.5 hoursPlayback at AVC Baseline 384 kbps Approximately 8.0 hours Approximately 7.5 hours

Wireless LANAt Web browsing Approximately 5.5 hours Approximately 5.0 hoursAt YouTube streaming Approximately 4.5 hours Approximately 4.0 hours

At receiving FM broadcasting Approximately 17.5 hours Approximately 14 hours

Display3-inch, OLED (Organic Light Emitting Diode) color display, WQVGA (432 × 240 pixels), 262,144 colors

Dimensions (w/h/d, projecting parts not included)52 × 96.5 × 9.8 mm ( 2 1/8 × 3 7/8 × 13/32 inches)

Dimension (w/h/d)52.5 × 97.4 × 10.5 mm (2 1/8 × 3 7/8 × 7/16 inches)

MassApprox. 98 g (Approx. 3.5 oz)

Supplied Accessories Headphones (1) USB cable (1) Earbuds (Size S, L) (1) Attachment (1) Use when connecting the player to the optional cradle, etc.

Audio input cable (1) Plug adaptor for in-flight use (single/dual) (1) CD-ROM*1*2 (1)– Media Manager for WALKMAN*3

– Windows Media Player 11– Content Transfer– Operation Guide (PDF file)

Quick Start Guide (1)*1 Do not attempt to play this CD-ROM in an audio CD player.*2 Depending on the country/region in which you have purchased the player, the bundled

software may be different.*3 Media Manager for WALKMAN is not bundled with the packages sold in the U.S.A.

Please download it from the following web site: http://www.sonycreativesoftware.com/download/wmm_lite

Design and specifications are subject to change without notice.

OpenMG, ATRAC, ATRAC3, ATRAC3plus, ATRAC Advanced Lossless and their logos are trademarks of Sony Corporation. “WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation. Microsoft, Windows, Windows Vista and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States States and/or other countries.

and are trademarks of Sony Corporation. Adobe and Adobe Reader are trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. IBM and PC/AT are registered trademarks of International Business Machines Corporation. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.

Pentium is a trademark or a registered trademark of Intel Corporation. YouTube and the YouTube logo are trademarks of Google Inc. Yahoo! and the Yahoo! logo are trademarks of Yahoo! Inc. Wi-Fi, the Wi-Fi CERTIFIED logo, WPA, WPA2 and Wi-Fi Protected Setup are trademarks or registered trademarks of Wi-Fi Alliance. This product contains NetFront Browser of ACCESS CO., LTD.

ACCESS, ACCESS logo and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the United States, Japan and/or other countries.

©2007 ACCESS CO., LTD. All rights reserved. This software is based in part on the work of the Independent JPEG Group. THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR(i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR(ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL

ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR(ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY

AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED MPEG LA, L.L.C. SEE HTTP://MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO(i) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR(ii) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY

AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual,TM and ® marks

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated.This device uses WM-DRM software to play Secure Content (“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.

Program ©2009 Sony CorporationDocumentation ©2009 Sony Corporation

are not specified.

NWZ-X1050/X1051/X1060/X1061

3

1. SERVICING NOTES ............................................. 3

2. DISASSEMBLY2-1. Disassembly Flow ........................................................... 82-2. Panel (Rear) .................................................................... 92-3. Hold Assy ........................................................................ 92-4. MAIN Board Assy (Including Battery Assy) .................. 102-5. Battery Assy (BATT1), MAIN Board ............................. 102-6. 5pin HP Jack Assy (J001), Chassis Section .................... 112-7. Key Flexible Print Board (FFC1), Chassis ..................... 122-8. EL Indicator Element (EL01) ......................................... 122-9. HOME KEY Board, Guard (Multi) ................................ 132-10. Button (VOL), Knob (NC) .............................................. 132-11. Touch Panel module (TPM1), Frame.............................. 14

3. TEST MODE ............................................................ 15

4. DIAGRAMS4-1. Schematic Diagram ......................................................... 274-2. Printed Wiring Board ...................................................... 28

5. EXPLODED VIEWS5-1. Panel (Rear) Section ....................................................... 295-2. MAIN Board Section ...................................................... 305-3. Touch Panel Section ........................................................ 31

6. ELECTRICAL PARTS LIST .............................. 32

Accessories are given in the last of the electrical parts list.

TABLE OF CONTENTS

NOTES ON CHIP COMPONENT REPLACEMENT• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

FLEXIBLE CIRCUIT BOARD REPAIRING• Keep the temperature of soldering iron around 270 °C during

repairing.• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).• Be careful not to apply force on the conductor when soldering

or unsoldering.

UNLEADED SOLDERBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40 °C higher

than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to

about 350 °C.Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to fl ow)

than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.

SECTION 1SERVICING NOTES

System Requirements Computer IBM PC/AT or compatible computer preinstalled with the following Windows operating systems: Windows XP Home Edition (Service Pack 2 or later) / Windows XP Professional (Service Pack 2 or later) / Windows Vista Home Basic (Service Pack 1 or later) / Windows Vista Home Premium (Service Pack 1 or later) / Windows Vista Business (Service Pack 1 or later) / Windows Vista Ultimate (Service Pack 1 or later) * Excluding OS Versions not supported by Microsoft * Excluding Windows® XP Professional x64 Edition * Excluding 64-bit OS versions for use with PC application software “Media Manager for

WALKMAN” CPU: Pentium 4 1.0 GHz or higher RAM: 512 MB or more Hard Disk drive: 380 MB or more of available space The supplied software may require more available space depending on the version of Windows. Furthermore, you need more space to store data such as music, videos, photos, etc.

Display:– Screen Resolution: 800 × 600 pixels (or higher) (recommended 1,024 × 768 or higher)– Colors: 8-bit or higher (16-bit recommended)

CD-ROM drive (supporting Digital Music CD playback capabilities using WDM) To create original CDs, a CD-R/RW drive is required.

Sound board USB port (Hi-Speed USB is recommended) Microsoft® .NET Framework 2.0 or 3.0, QuickTime®7.3(supplied), Internet Explorer 6.0 or 7.0, Windows Media Player 10 or 11, DirectX9.0 are required. (Windows Media Player 11 recommended. Some computers that already have Windows Media Player 10 installed may encounter file limitation (AAC, video files, etc.) that can be transferred by dragging and dropping.)

Adobe Flash Player 8 or higher needs to be installed. Broadband Internet connection is required to use Electronic Music Distribution (EMD) or to visit the web site.

We do not guarantee operation for all computers even if they meet the above System Requirements.

Not supported by the following environments:– Personally constructed computers or operating systems– An environment that is an upgrade of the original manufacturer-installed operating

system– Multi-boot environment– Multi-monitor environment– Macintosh

NWZ-X1050/X1051/X1060/X1061

4

NOTE THE MAIN BOARD REPLACINGWhen the MAIN board is replaced, process it according to the fol-lowing.

1. Format

Format

You can format the built-in flash memory of the player.

Notes If the memory is formatted, all data (songs, videos, photos, etc., including sample data installed at the factory) will be erased. Be sure to verify the data stored in memory prior to formatting and export any important data to the hard disk of your computer.

Be sure not to initialize (format) the built-in flash memory of the player by using Windows Explorer. If you have formatted with Windows Explorer, format again by using the player.

1 From the Home menu, select (Settings) “Common Settings” “Reset/Format” “Format.”

“All data including songs will be deleted. Proceed?” appears.

2 Select “Yes.”

“All data will be deleted. Proceed?” appears. To cancel the operation, select “No.”

3 Select “Yes.”

When initialization finishes, “Memory formatted.” appears. To cancel the operation, select “No.”

2. Reset all setting

Reset All Settings

You can reset the player to the default settings. Resetting the player also deletes the wireless LAN encryption key, but does not delete data such as music, video, and photo data.

Note This function is only available in the pause mode.

1 From the Home menu, select (Settings) “Common Settings” “Reset/Format” “Reset All Settings” “Yes.”

“Restored factory settings.” appears. To cancel the operation, select “No” on the confirmation screen.

3. Wallpapers settingIt is necessary to install the Wallpapers. Confi rm details to each service headquarters.

4. OtherMAC address has been changed. Print the page 5, and pass it to the customer with the repaired set when you return the customer the repaired set.

NWZ-X1050/X1051/X1060/X1061

5

Note:The MAC address of this set was changed along with this repair.Please set it again if you are using the MAC address fi ltering function of access point device of connection destination.Please refer to the operation guide of this set for the confi rm method of MAC address confi rming.
















• Please cut out along the dotted line and use it.

NWZ-X1050/X1051/X1060/X1061

6

MEMO

NWZ-X1050/X1051/X1060/X1061

7

METHOD OF JUDGING RIGHT AND WRONG OF PARTS RELATED TO SWITCHIn this set, only a part of parts that relate to the switch are supplied. Exchange the entire mounted board when parts that do not corre-spond to it are defective.The right and wrong of the switch can be judged by the following two methods.

1. Judgment From The Test ModeJudge the right and wrong of the switch referring to “4-4-2. Key check” (page 22).

2. Judgment from the voltage measurementJudge the right and wrong of the switch by the voltage measure-ment with a test point.

2-1. [u]/[>]/[.] keysConnection:

+–

digital voltmeter

CL881 (KEY_AD0)CL885 (GND)

When the voltage value is below, [u]/[>]/[.] keys are normal.• [u] key is pressed : 0 to 0.25 V• [>] key is pressed : 0.4 to 0.6 V• [.] key is pressed : 0.76 to 0.95 V

2-2. [VOL +]/[VOL –]/[HOME] keysConnection:

+–

digital voltmeter

CL882 (KEY_AD1)CL885 (GND)

When the voltage value is below, [VOL +]/[VOL –]/[HOME] keys are normal.• [VOL –] key is pressed : 0 to 0.25 V• [VOL +] key is pressed : 0.4 to 0.6 V• [HOME] key is pressed : 0.76 to 0.95 V

2-3. HOLD switch (S881)Connection:

+–

digital voltmeter

S881 (HOLD SW pin 2)CL885 (GND)

When the voltage value is below, HOLD switch (S881) is normal.• HOLD switch is turned on : 2.85 V• HOLD switch is turned off : 0 V

Connection location:

CL881(KRY_AD0)

CL882(KEY_AD1) CL885

(GND)

S881

S881(HOLD SW)

12

– MAIN Board (Side B) –Note: Refer to page 27 for the schematic diagram. Refer to page

28 for the printed wiring boards.

NWZ-X1050/X1051/X1060/X1061

8

SECTION 2DISASSEMBLY

• This set can be disassembled in the order shown below.

2-1. DISASSEMBLY FLOW

2-2. PANEL (REAR) (Page 9)

SET

2-3. HOLD ASSY (Page 9)

2-4. MAIN BOARD ASSY (INCLUDING BATTERY ASSY) (Page 10)

2-5. BATTERY ASSY (BATT1), MAIN BOARD (Page 10)

2-6. 5PIN HP JACK ASSY (J001), CHASSIS SECTION (Page 11)

2-7. KEY FLEXIBLE PRINT BOARD (FPC1), CHASSIS (Page 12)

2-11. TOUCH PANEL MODULE (TPM1), FRAME (Page 14)

2-8. EL INDICATOR ELEMENT (EL01) (Page 12)

2-10. BUTTON (VOL), KNOB (NC) (Page 13)

2-9. HOME KEY BOARD, GUARD (MULTI) (Page 13)

NWZ-X1050/X1051/X1060/X1061

9

Note: Follow the disassembly procedure in the numerical order given.

2-2. PANEL (REAR)

Note 1: This illustration sees the set from rear side.

2-3. HOLD ASSY

Note: This illustration sees the set from rear side.

1 two screws (M1.4)

4

hold assy

panel rear section

7 two adhesive sheet (rear)

8 panel (rear)

5 claw (panel)

6 plate (rear)

3 claw

2 Peel off panel (rear) section of the hold assy side in the adhesive sheet (rear) two places.

Note 2: Please work noting that the panel (rear) is damaged.

1 screw (M1.4)

3 hold assy

2 screw (B1.4)

NWZ-X1050/X1051/X1060/X1061

10

2-4. MAIN BOARD ASSY (INCLUDING BATTERY ASSY)


2-5. BATTERY ASSY (BATT1), MAIN BOARD

Note: This illustration sees the MAIN board from battery assy side.

6 two screws (M1.4)

8 Open the MAIN board assy in the direction of the arrow.

q; MAIN board assy (including battery assy)

2 battery connector (CN901)

1 cushion (B connector)

5 5pin HP jack assy flexible board (CN301)7 Move the MAIN board assy

in the direction of the arrow.

3 key flexible print board (CN881)

4 touch panel module flexible board (CN882)

9 EL indicator element flexible board (CN801)

1 Peel off the protection sheet (battery) in the direction of the arrow.

3 protection sheet (battery)

2 battery assy (BATT1)

4 MAIN board

NWZ-X1050/X1051/X1060/X1061

11

2-6. 5PIN HP JACK ASSY (J001), CHASSIS SECTION

Note 1: This illustration sees the set from rear side.

1 two screws (M1.4)

5 two screws (M1.4)

7 chassis section

2 holder (jack)

3 5pin HP jack assy (J001)

4 insulation sheet (O-FPC)

6 Open the EL indicator element in the direction of the arrow.

Note 2: Please work noting that the EL indicator element flexible board is damaged.

NWZ-X1050/X1051/X1060/X1061

12

2-7. KEY FLEXIBLE PRINT BOARD (FPC1), CHASSIS

2-8. EL INDICATOR ELEMENT (EL01)


qd key flexible print board (FPC1)

q; cover (reset)

qa two adhesive sheets (reset)

7 adhesive sheet (top)

4 two adhesive sheets (button)

1 two claws

2

6 Peel off key flexible print board (FPC1) of the base (top) top side.

Note 2: Please work noting that the key flexible print board (FPC1) is damaged.

3 lid (top)

5 button (top)

9 spacer (vol)

qf chassis

8 base (top)

qs Peel off key flexible print board (FPC1) of the chassis.

Note 1: Please work noting that the key flexible print board (FPC1) is damaged.

1 Remove the EL indicator element (EL01) in the direction of the arrow.

Direction where EL indicator element is peeled off.

frame section (rear side)

2 EL indicator element (EL01)

EL indicator element (EL01)

EL indicator element (EL01)

frame section (rear side)

frame section (rear side plan)

Note 2: Please work noting that the EL indicator element (EL01) is damaged.

NWZ-X1050/X1051/X1060/X1061

13

2-9. HOME KEY BOARD, GUARD (MULTI)


2-10. BUTTON (VOL), KNOB (NC)


4 HOME KEY board is lightiy pushed from button side.

2 three claws

7 two claws

6 adhesive sheet (home PWB)

1 dot connector (CN001)

5 HOME KEY board

8 guard (multi)

3 button (home) assy

Note 2: They are important parts. Do not forget to install it.

– front side –

1 button (vol)2 bracket (NC)

3 knob (NC)

NWZ-X1050/X1051/X1060/X1061

14

2-11. TOUCH PANEL MODULE (TPM1), FRAME

6 touch panel module (TPM1) 1 spacer (window)

2 Peel off touch panel module flexible board.

4 Please work noting that the touch panel module section is damaged of the frame.

7 adhesive sheet (window)

3 adhesive sheet (catch)

q; frame

8 adhesive sheet (lid)

9 adhesive sheet (lid.B)

5 cushion (OLED)

Note 2: Adhesive sheet (window) cannot re-used. please replace to brand-new part ones adhesive sheet (window) is removed.

Note 1: Please work noting that the touch panel module flexible board is damaged.

NWZ-X1050/X1051/X1060/X1061

15

SECTION 3TEST MODE

1. SETTING THE TEST MODENote: Perform the test mode in the state of 3.6 V or more in the battery

voltage.Setting method:1. Turn the power on.2. Press the [HOME] key, the home menu is displayed. 3. While touching the [Settings] icon on the touch panel, press

the key as following order. [u] → [>] → [.] → [VOL +] → [>] → [VOL –] →

[>]4. The set reboots and the color bar is displayed in the liquid crys-

tal display.5. Enter the test mode when the [HOME] key is pressed in the

state of step 4.Note: The destination setting and sound pressure regulation setting cannot

be executed by this test mode.

2. RELEASING THE TEST MODE1. Display the major item selection screen.2. Press the [>]/[.] key to select the “EXITTEST”, and

press the [u] key to select the “SURE ?”.3. Press the [u] key, turn the power off and release the test

mode.

3. CONFIGURATION OF THE TEST MODE

[ ] key

Major item Major item switching: [ ]/ [ ] key

[HOME] key

Minor item

Finishor

Result

Start

Automatic

u

[HOME] key[ ] key

> .

> .

Minor item switching: [ ]/ [ ] key

u

4. OPERATION OF THE TEST MODE4-1. Power (POWER)

Screen display

MPTAPP (X.XX.XX)

POWER VCHK AUDIO ACHK VIDEO DSVCHK OTHER CHGCHK CLESTE BATTCHK DAC FM WIFI NC SHUTDOWN EXITTEST

4-1-1. Power supply voltage check (VCHK)This mode is used in case power supply voltage in the state where all power supply lines are starting is checked.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “POWER”, and press

the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “VCHK”.4. Press the [u] key, all power supply lines are started.

Screen display

POWER VCHK

START

In this state, the power supply voltage of each power supply line can be confi rmed by measuring the voltage.

5. Press the [HOME] key, return to minor item selection screen.

4-1-2. Consumption current (audio playback) check (ACHK)

This mode is used in case consumption current (audio playback) is checked in the state where “1 kHz 0 dBs L-ch/R-ch VOLUME: 15” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “ACHK”.4. Press the [u] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 15”

audio signal is outputted.

Screen display

POWER ACHK1kHz 0dBs L/Rch

HPOUT [ VOL: 15 ]

START

5. In this state, each time the [>] key is pressed, LCD back light on/off switch is performed.


Note 1: Information on the test mode must correspond in enough security. When the leakage has been revealed by any chance, the source of information is specifi ed.

Note 2: Execute “EXITTEST” when you release the test mode.

NWZ-X1050/X1051/X1060/X1061

16

4-1-3. Standby current check (DSVCHK)This mode is used in case standby current is checked.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “DSVCHK”.4. Press the [u] key, enter the state of the deep sleep.5. Press the [HOME] key, release the state of the deep sleep.

Screen display

POWER DSVCHK

OK


4-1-4. Charge current check (CHGCHK)This mode is used in case charge current is checked.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “CHGCHK”.4. Press the [u] key, the charge setting is displayed.

Screen display

POWER CHGCHKAC

AC

5. In this state, each time the [>] key is pressed, the port setting for the charge is changed as shown in the table below.

Port controlDisplay CHG_XCHGEN CHG_PEN1 CHG_PEN2AC L H HUSB500 L H HUSB100 L H L


4-1-5. Battery voltage detection check (BATTCHK)This mode is used in case battery voltage is checked.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “BATTCHK”.4. Press the [u] key, the battery voltage is displayed. When the battery voltage cannot be confi rmed, “ERROR” is

displayed.

Screen display

POWER BATTCHKX.XXXV

X.XXXV: Battery voltage


4-2. Audio (AUDIO)While playing the audio track, it’s in a repeat state. If [BACK] key is pressed, it’s stopped.Press the [.] key to switch the HP/LINE/SPEAKER.

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO OUTPUT VIDEO SN OTHER F1 CLESTE F2 DAC SEPLR WIFI SEPRL FM MAXOUT NC NMLZR SHUTDOWN SPCHK EXITTEST SPKCHK USER1 USER2 USER3

NWZ-X1050/X1051/X1060/X1061

17

4-2-1. Output check (OUTPUT)“1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “AUDIO”, and press

the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “OUTPUT”.4. Press the [u] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 25”


Screen display

AUDIO OUTPUT1kHz 0dBs L/Rch

HPOUT [ VOL: 25 ]

START


4-2-2. S/N check (SN)“Infi nity Zero VOLUME: 30” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “SN”.4. Press the [u] key, “Infi nity Zero VOLUME: 30” audio signal

is outputted.

Screen display

AUDIO SNInfi nity Zero

HPOUT [ VOL: 30 ]

START


4-2-3. Frequency characteristic 1 check (F1)“20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “F1”.4. Press the [u] key, “20 Hz 0 dBs L-ch/R-ch VOLUME: 25”


Screen display

AUDIO F120Hz 0dBs L/Rch

HPOUT [ VOL: 25 ]

START


4-2-4. Frequency characteristic 2 check (F2)“20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is output-ted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “F2”.4. Press the [u] key, “20 kHz 0 dBs L-ch/R-ch VOLUME: 25”


Screen display

AUDIO F220kHz 0dBs L/RchHPOUT [ VOL: 25 ]

START


NWZ-X1050/X1051/X1060/X1061

18

4-2-5. CH separation (L-ch) check (SEPLR)“1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “SEPLR”.4. Press the [u] key, “1 kHz 0 dBs L-ch VOLUME: 25” audio

signal is outputted.

Screen display

AUDIO SEPLR1kHz 0dBs Lch

HPOUT [ VOL: 25 ]

START


4-2-6. CH separation (R-ch) check (SEPRL)“1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “SEPRL”.4. Press the [u] key, “1 kHz 0 dBs R-ch VOLUME: 25” audio

signal is outputted.

Screen display

AUDIO SEPRL1kHz 0dBs Rch

HPOUT [ VOL: 25 ]

START


4-2-7. Maximum output check (MAXOUT)“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” (Headphone output when AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 14”) audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “MAXOUT”.4. Press the [u] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”

(Headphone output when AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 14”) audio signal is outputted.

Screen display

AUDIO MAXOUT1kHz 0dBs L/Rch

HPOUT [ VOL: 30 ]AVLS OFF

START

5. In this state, each time the [OPTION] key is pressed, AVLS on/off switch is performed.


4-2-8. Normalizer check (NMLZR)“1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is output-ted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “NMLZR”.4. Press the [u] key, “1 kHz –24 dBs L-ch/R-ch VOLUME: 30”


Screen display

AUDIO NMLZR1kHz –24dBs L/RchHPOUT [ VOL: 30 ]

START


NWZ-X1050/X1051/X1060/X1061

19

4-2-9. Sound pressure regulation level check (SPCHK)“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “SPCHK”.4. Press the [u] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”


Screen display

AUDIO SPCHK1kHz 0dBs L/Rch

HPOUT [ VOL: 30 ]

START


4-2-10. Speaker check“20 − 20kHz 0dBs L-ch/R-ch VOLUME: 30” audio signal is out-putted.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “SPKCHK”.4. Press the [u] key, “20 − 20kHz 0dBs L-ch/R-ch VOLUME:

30” audio signal is outputted.

Screen display

AUDIO SPKCHK20-20kHz 0dBs L/Rch

HPOUT [ VOL: 30 ]

START


4-2-11. User specifi cation contents playback 1 (USER1)“/User1.oma” is reproduced.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “USER1”.4. Press the [u] key, “/User1.oma” is reproduced.

Screen display

AUDIO USER1HPOUT [ VOL: 15 ]

XX:XX

START

XX:XX : Repetition expert totaling time





Screen display


XX:XX

START



NWZ-X1050/X1051/X1060/X1061

20




Screen display


XX:XX

START



4-3. Video (VIDEO)

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO — LCD OTHER USER1 CLESTE USER2 DAC USER3 WIFI FM NC SHUTDOWN EXITTEST

4-3-1. LCD display check (LCD)Screen display is checked.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “VIDEO”, and press

the [u] key to select the “LCD”.3. Press the [u] key, all black is displayed on the screen.4. In this state, each time the [VOL +] key is pressed, the screen

display changes in the following order.

All black (default) → Color bar (standard) → Color bar (brightness minimum) → Color bar (brightness maximum) → All red → All green → All blue → All white → diagonal gra-dation (red) → diagonal gradation (green) → diagonal grada-tion (blue) → diagonal gradation (white) → Maximum draw-ing size confi rmation

Maximum drawing size confi rmation: All blue (All sides are red) is displayed. Whether red in all

sides is seen is confi rmed.5. In this state, each time the [>] key is pressed, brightness

min/max/middle switch is performed.6. Press the [HOME] key, return to minor item selection screen.

4-3-2. User specifi cation contents playback 1 (USER1)“/User1.mp4” is reproduced.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “USER1”.4. Press the [u] key, “/User1.mp4” is reproduced.

Screen display

VIDEO USER1HPOUT [ VOL: 15 ]

[ WIFI: OFF ][ CHARGE: AC ]

XX:XX

START



NWZ-X1050/X1051/X1060/X1061

21




Screen display


[ WIFI: OFF ][ CHARGE: AC ]

XX:XX

START






Screen display


XX:XX

START



4-4. Other (OTHER)

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLOCK CLESTE KEY DAC KEYNUM WIFI TOUCH FM FORMAT NC DEST SHUTDOWN SPSET EXITTEST FWVER NCAPCHK

4-4-1. Clock check (CLOCK)The movement of an internal clock is confi rmed.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “OTHER”, and press

the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “CLOCK”.4. Press the [u] key, date and time are displayed.

Screen display

OTHER CLOCKXX, XX XX XXXX##:##:##.######

START

XX, XX XX XXXX : Date ##:##:##.###### : Time

“START” changes into “OK” if the movement of an internal clock is confi rmed.


NWZ-X1050/X1051/X1060/X1061

22

4-4-2. Key check (KEY)The operation of the key is confi rmed.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “KEY”.4. Press the [u] key, all keys are displayed.

Screen display

OTHER KEY VOL+

REW PLAY FF VOL–HOLD NC

START

5. The character corresponding to the key is selected every time the key is pressed. “OK” is displayed if all keys are pressed.

6. Slide the [HOLD] key from ON to OFF, return to minor item selection screen.

4-4-3. Frequency check that presses key (KEYNUM)The frequency to which the key is pressed, insert/pull out frequen-cy of cradle and insert/pull out frequency of the headphone are displayed.

Note: Not used for the servicing.

4-4-4. Touch panel check (TOUCH)The position in which the touch panel is pressed is displayed.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “TOUCH”.4. Enter the mode when the [u] key is pressed. When the touch

panel is pressed, the position in which the touch panel is pushed at that time is displayed.

Screen display

OTHER TOUCH #060fps

XX-XX-XX-XX-XX-XXXX-XX-XX-XX-XX

NO GESTURE


4-4-5. Format (FORMAT)The user’s area is formatted, and ICV for the video and ICV for audio are initialized.

Note: Not used for the servicing. Format the set from “Settings” → “Common settings” → “Format”

when it home menu in usually operates when the set should format it.

4-4-6. Destination setting (DEST)The destination setting, language information, and sound pressure regulation information are written in the NAND fl ash memory.


4-4-7. Sound pressure regulation setting (SPSET)ON/OFF of sound pressure regulation is confi rmed.


4-4-8. Firmware version check (FWVER)The fi rmware version is displayed.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “OTHER” and press

the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “FWVER”.4. Press the [u] key, the fi rmware version is displayed.

Screen display

OTHER FWVERX.XX.XX

MODEL NAMENWZ-####

SERIAL NO@@@@@@@

WIFI MAC ADR&&-&&-&&-&&-&&-&&

WIFI MAC ADR(NVP)%%-%%-%%-%%-%%-%%

X.XX.XX : Firmware version #### : Model name @@@@@@@ : Serial No. &&-&&-&&-&&-&&-&& : MAC address of WiFi module %%-%%-%%-%%-%%-%% : MAC address of WiFi in NVP


NWZ-X1050/X1051/X1060/X1061

23

4-4-9. NAND capacity check (NCAPCHK)Capacity of NAND fl ash memory, present bad block, maximum bad block, and vender ID are displayed.


the [u] key to enter the minor item.3. Press the [>]/[.] key to select the “NCAPCHK”.4. Press the [u] key, capacity of NAND fl ash memory, present

bad block, maximum bad block, and vender ID are displayed.

Screen display

OTHER NCAPCHKX GB

BAD BLOCKCUR (####)/MAX (@@@@)

VENDOR ($$$$)

X : Capacity of NAND fl ash memory @@@@ : Number of present bad block (It makes an error the acquisition of the number of

bad blocks at “–1”) #### : Number of maximum bud block (It makes an error the acquisition of the vender ID

at “–1”) $$$$ : Vender ID of NAND fl ash memory 0x98/0xec (TOSHIBA/SAMSUNG) (It makes an error the acquisition of the vender ID

at “–1”)5. Press the [HOME] key, return to minor item selection screen.

4-5. CLESTE

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLESTE WCABLE DAC WOCABLE WIFI FM NC SHUTDOWN EXITTEST

4-5-1. Clear stereo setting (With cable) (WCABLE)This mode is according to an original sound playback, for adjust-ment to right and left sound.


4-5-2. Clear stereo setting (No cable) (WOCABLE)This mode is according to an original sound playback, for adjust-ment to right and left sound.


4-6. DAC

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLESTE DAC B-GAIN WIFI T-GAIN FM NC SHUTDOWN EXITTEST

4-6-1. BASS-Gain/Fc setting (B-GAIN)This mode is adjustment for the sound of BASS when playback.


4-6-2. TREBLE-Gain/Fc setting (T-GAIN)This mode is adjustment for the sound of TREBLE when playback.


4-7. Wi-Fi (WIFI)

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLESTE DAC 1SEG WIFI TX(CW) FM TX(MOD) NC RX SHUTDOWN RSSI EXITTEST POWER APINFO APCONN APSCAN

NWZ-X1050/X1051/X1060/X1061

24

4-7-1. Consecutive no-modulation Wi-Fi transmission (TX (CW))

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “WIFI”, and press the

[u] key to enter the minor item.3. Press the [>]/[.] key to select the “TX(CW)”.4. Press the [u] key, the consecutive no-modulation Wi-Fi

transmission is begun.

Screen display

WIFI TX (NO MOD)XXch (XXXXMHz)

5. In this state, each time the [VOL +]/[VOL –] keys are pressed, the transmission channel is changed.


4-7-2. Consecutive modulation Wi-Fi transmission (TX (MOD))


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “TX(MOD)”.4. Press the [u] key, the consecutive modulation Wi-Fi trans-

mission is begun.

Screen display

WIFI TX (MOD)XXch (XXXXMHz)

XXMbps

5. In this state, each time the [VOL +]/[VOL –] keys are pressed, the transmission channel is changed.

6. In this state, each time the [>]/[.] keys are pressed, the transmission bit rate is changed.


4-7-3. Consecutive Wi-Fi receptions (RX)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “RX”.4. Press the [u] key, the consecutive Wi-Fi reception is begun.

Screen display

WIFI RXXXch (XXXXMHz)

5. In this state, each time the [VOL +]/[VOL –] keys are pressed, the reception channel is changed.


4-7-4. Wi-Fi RSSI acquisitions (RSSI)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “RSSI”.4. Press the [u] key, the RSSI is acquired. The RSSI is regularly

renewed.

Screen display

WIFI RSSIXXXX


NWZ-X1050/X1051/X1060/X1061

25

4-7-5. Wi-Fi power setting (POWER)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “POWER”.4. Press the [u] key, the power setting is displayed.

Screen display

WIFI POWERXXdBm

5. In this state, each time the [VOL +]/[VOL –] keys are pressed, the power setting is changed.


4-7-6. Wi-Fi access point information acquisitions (APINFO)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “APINFO”.4. Press the [u] key, the Wi-Fi access point is acquired.

Screen display

WIFI APINFO (X/X)(Detected:XX)

XX XX XXXXXXXXX XX XXXXXXXXX XX XXXXXXX

5. In this state, each time the [>]/[.] keys are pressed, dis-played page is changed.

6. In this state, each time the [u] key is pressed, access point information is acquired again.


4-7-7. Wi-Fi access point connection (APCONN)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “APCONN”.4. Press the [u] key, the connection with the access point is

begun.

Screen display

WIFI APCONNECT(Connected)

SSID : XXXXXXRSSI : XXXSNR : XXX

IPADR : XXX.XXX.XXX.XXXRXTHRU : XXX bps


4-7-8. Wi-Fi access point consecutive connection (APSCAN)


[u] key to enter the minor item.3. Press the [>]/[.] key to select the “APSCAN”.4. Press the [u] key, the consecutive connection with the access

point is begun. At this time, the result is not displayed.

Screen display

WIFI APSCAN<Acquiring...>


NWZ-X1050/X1051/X1060/X1061

26

4-8. FM

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLESTE DAC WIFI FM — RCVCHK NC SHUTDOWN EXITTEST

4-8-1. Reception output check (RCVCHK)FM tuning checked.

Checking method:1. Enter the test mode.2. Press the [>]/[.] key to select the “FM”, and press the

[u] key to select the “RCVCHK”.3. Press the [u] key, “90.00 MHz”.4. In this state, each time the [OPTION] key is pressed, frequency

is changes in the following order.

Screen display

FM RCVCHK90.00 MHz

[VOL : 30]

[WIFI : OFF]

90.00 MHz (default) → 76.00 MHz → 95.75 MHz → 107.75 MHz → 87.50 MHz → 98.00 MHz → 108.00 MHz


4-9. NC

Screen display

MPTAPP (X.XX.XX)

POWER AUDIO VIDEO OTHER CLESTE DAC WIFI FM NC — GAIN-L SHUTDOWN GAIN-R EXITTEST

4-9-1. Microphone gain (L-ch) adjustment (GAIN-L)Microphone gain (L-ch) is adjusted.


4-9-2. Microphone gain (R-ch) adjustment (GAIN-R)Microphone gain (R-ch) is adjusted.


4-10. Shutdown (SHUTDOWN)Function that power supply of set can be turned off without ending static test mode.

Procedure:1. Enter the test mode.2. Press the [>]/[.] key to select the “SHUTDOWN”, and

press the [u] key to select the “SURE ?”.3. Press the [u] key, turn the power off while having entered the

test mode.

NWZ-X1050/X1051/X1060/X1061

NWZ-X1050/X1051/X1060/X1061

2727

SECTION 4DIAGRAMS

4-1. SCHEMATIC DIAGRAM

For Schematic Diagrams.Note:• All capacitors are in μF unless otherwise noted. (p: pF) 50

WV or less are not indicated except for electrolytics and tantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise specifi ed.

• C : Panel designation.• A : B+ Line.

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.(In addition to this, the necessary note is printed in each block.)

For Printed Wiring Boards.Note:• Y : Parts extracted from the conductor side.• : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.)

Caution:Pattern face side: (SIDE B)Parts face side:(SIDE A)

Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.

• MAIN board is muliti-layer printed board. However, the patterns of intermediate-layers have not been in-

cluded in diagrams.• Lead layouts

surface

CSP (Chip Size Package) Lead layout of conventional IC

Note 2: When the MAIN board is replaced, there are some notes. Refer to “NOTE THE MAIN BOARD REPLACING” (page 4) in servicing notes for notes.

Note 1: In this set, only a part of parts that relate to the switch are supplied. Therefore, the schematic diagram excerpts and has described only a part. Replace a part according to “METHOD OF JUDGING RIGHT AND WRONG OF PARTS RELATED TO SWITCH” (page 7) in servicing notes. Exchange the entire mounted board when parts that do not correspond to it are defective.

CL881

CL882

CL883

KEY_AD0

KEY_AD1

DGND

11PCN881

1 GND

2 NC

3 FR

4 PLAY

5 FF

6 VOL+

7 VOL-

8 RESET

9

10

11 GND

3LP01S-K-TL-EQ881

VDD_GP1_J

KEY_WAKE

NC_ON

XHOLD_KEYCL886

CL887

CL884

CL885

EXTRST

0.01C884

0.01C883

C8810.047

C8820.047

470kR893

47kR886

100R895

47kR887

470kR883

R892470k

10kR889

470kR881

10kR890

10kR891

0R897

10kR888

1kR885

1kR882

1kR884

100R896

S

HOLD

S881

MAIN BOARD

(KEY_AD0)

(KEY_AD1)

(GND)

4

B

63 5

C

1

A

2

NWZ-X1050/X1051/X1060/X1061

NWZ-X1050/X1051/X1060/X1061

2828

4-2. PRINTED WIRING BOARD


Note 1: In this set, only a part of parts that relate to the switch are supplied. Replace a part according to “METHOD OF JUDGING RIGHT AND WRONG OF PARTS RELATED TO SWITCH” (page 7) in servicing notes. Exchange the entire mounted board when parts that do not correspond to it are defective.

A1

A2A3

B1

B2B3

C1C2C3

D1D2D3

E1E2E3

F1F2F3

G1G2G3

H1H2H3

J1J2J3

K1K2K3

L1L2L3

M1M2M3

N1N2N3

P1P2P3

R1R2R3

A7A8A9

B7B8B9

C7C8C9

D7D8D9

E7E8E9

F7F8F9

G7G8G9

H7H8H9

J7J8J9

K7K8K9

L7L8L9

M7M8M9

N7N8N9

P7P8P9

R7R8R9

R401

R403

R210

FB60

8

R404

R211R212

R407

R213

R214

R408

IC541

R409

R215

FB80

2

IC54

3

FB80

3

R217

IC544

FB80

4FB

805

IC54

5

FB80

6 R602

IC546

FB80

7

R410

R604

FB80

8

R411

R605FB

809

R412

R607

R413

R220

R608

IC741

IC742

R223

IC744

FB81

0FB

811

R225

R226

FB81

2FB

813

FB81

4

R611

FB81

5FB

816

FB81

7

R808

FB81

8

R809

FB81

9R616

R617

R618

R810

R621R622

R623R624

C201

R625

C202

R626

C203

R627

C204

CN801

C205

C209

R630

C401

C402

R633

C403

C210

R634

C404

C211C212

C213

C214

C215

C409

C217

C601

C602

C603

C604

C410

R641

C411

C412

R643

C607

C413

C414

R644

C608

C609

C610

VDR851 VDR852

C612

X602

VDR8

53

FB853

X603

C613

FB854

VDR8

54 VDR855FB855

VDR856

FB856

C616

VDR8

57 FB857

VDR858

VDR859

R655

R656

R657

R658

FB860

C620

VDR861

VDR862C817

C818

C819

C625C626

R664

C629

C630

R860

C632

C633C634

C638

CN851

C640

C641

C643

C644

C645

C646

R683R684

C648

D201

D203

Q301

R689

Q302

Q303

Q304

C651

Q305

C652

C654

R690

R691

L101

D401

C656

L103

Q501

C661

C857

C664

C666

C668

C669

Q901

C673

C674

LF851

C675

IC401

C679

IC601

C681

IC602

C683

L901L902

FL701

C690

C691

FB103

C698

C699

R101

R102

R103

R105

R106

L541

R303

R110

R111

R112

R113

R308

R114 R115

R309

R117

R501

R502

D851

R311

R506

R312

R507

R313

R508

R120

R314

R315

R123

R701

R125

R126

R511

R320

R321

R323R325

R327

R908

R521

R909

R522R523

C101

C102

C103

R910

R334

C104

R911

R335

C105

R336

R913

R337

R914

R338

R339

C109

R916

R919

C302

C303

C304

C110

R340

C305

C111C112

C306

R342

C113

C307

R344

R920

C308

C114

R921

C115

C309R345

R922

R346

R923

C117

R347

R348

C501

R926C502R927

C503

R928

C504

C310

C505

R929

C311

R541

X301

C506

C312

C507

C313

C508

C314

R544

R351

C315 C316C317

R930

R548

C318

R931

C319

C701

R549

C702

C703

X501

C511

R935

C512

R742

C706

R743

C707

R744

R550

C320

R745

C321

CL401

R551

R552

C322

CL402

R746

C323

R553

R747

R554

C324

R555

C325

C902

C326

C903

C327

R557

R558

C904

C328

C905

C329

C711

C906

C712

C713

C908

C714

R750

C909

R751

R752 R753

C330

R754

C331

R755

C332

R756

C333

R757

C910

R758

C334

C335

R759

C912

C336

C913

C337

C914

C338

C339

C916

C917

C918

R760

C919

R761 R762

R764

C340

C341R765R766

C342

C343

R767

C920

R768C344

C921

C345

R769

C922

C347

C924

C348

C925

C349

C927

C928

R770

C541

R771R772

C543

R773

C350

R774

C545

R775

C351

R776

C546

C352

R777

C547

C353

R778

C354

C548

D101

C549

R779

C356

C357

D103

C358

C359

C741

C742

C743

C550

C744R780

C551

R781

C745

C552

R782

C553

C554

C360

C361

C555

R785

D301

C556

R786R787

C557

C558

R789

C559

JL541

C560

L201

C561

R791

C562

R792

C563

R793

L203

C564

C567

IC301

IC302

IC304

IC305

L601

IC306

L602

IC501

IC503

IC504

IC701FL601

IC901

IC902

FB203

FB401

R201

TB401

R202R203

R204

CL886 CL887

R208

FB601

ET541

A1A2B1B2

A1A2A3A4A5A6A7A8A9A10A11A12A13A14A15A16A17A18A19A20A21A22A23A24A25A26

AA1AA2AA3AA4AA5

AA22AA23AA24AA25AA26

AB1AB2AB3AB4AB5AB6AB7AB8AB9AB10AB11AB12AB13AB14AB15AB16AB17AB18AB19AB20AB21AB22AB23AB24AB25AB26

AC1AC2AC3AC4AC5AC6AC7AC8AC9AC10AC11AC12AC13AC14AC15AC16AC17AC18AC19AC20AC21AC22AC23AC24AC25AC26

AD1AD2AD3AD4AD5AD6AD7AD8AD9AD10AD11AD12AD13AD14AD15AD16AD17AD18AD19AD20AD21AD22AD23AD24AD25AD26

AE1AE2AE3AE4AE5AE6AE7AE8AE9AE10AE11AE12AE13AE14AE15AE16AE17AE18AE19AE20AE21AE22AE23AE24AE25AE26

AF1AF2AF3AF4AF5AF6AF7AF8AF9AF10AF11AF12AF13AF14AF15AF16AF17AF18AF19AF20AF21AF22AF23AF24AF25AF26

B1B2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26

C1C2C3C4C5C6C7C8C9C10C11C12C13C14C15C16C17C18C19C20C21C22C23C24C25C26

D1D2D3D4D5D6D7D8D9D10D11D12D13D14D15D16D17D18D19D20D21D22D23D24D25D26

E1E2E3E4E5E6E7E8E9E10E11E12E13E14E15E16E17E18E19E20E21E22E23E24E25E26

F1F2F3F4F5

F22F23F24F25F26

G1G2G3G4G5

G22G23G24G25G26

H1H2H3H4H5

H8H9

H10H11H12H13H14H15H16H17H18H19

H22H23H24H25H26

J1J2J3J4J5

J8J9

J10J11J12J13J14J15J16J17J18J19

J22J23J24J25J26

K1K2K3K4K5

K8K9

K10K11K12K13K14K15K16K17K18K19

K22K23K24K25K26

L1L2L3L4L5

L8L9

L10L11

L17L18L19

L22L23L24L25L26

M1M2M3M4M5

M8M9M10

M17M18M19

M22M23M24M25M26

N1N2N3N4N5

N8N9N10

N17N18N19

N22N23N24N25N26

P1P2P3P4P5

P8P9

P10

P17P18P19

P22P23P24P25P26

R1R2R3R4R5

R8R9R10

R17R18R19

R22R23R24R25R26

T1T2T3T4T5

T8T9

T10

T17T18T19

T22T23T24T25T26

U1U2U3U4U5

U8U9U10U11U12U13U14U15U16U17U18U19

U22U23U24U25U26

V1V2V3V4V5

V8V9V10V11V12V13V14V15V16V17V18V19

V22V23V24V25V26

W1W2W3W4W5

W8W9W10W11W12W13W14W15W16W17W18W19

W22W23W24W25W26

Y1Y2Y3Y4Y5

Y22Y23Y24Y25Y26

A1A2

B1B2

A1A2B1B2

A1A2A3A4A5A6A7A8A9A10

B1B2B3B4B5B6B7B8B9B10

C1C2C3C4C5C6C7C8C9C10

D1D2D3D4

D8D9D10

E1E2E3

E8E9E10

F1F2F3

F8F9F10

G1G2G3

G8G9G10

H1H2H3H4H5H6H7H8H9H10

J1J2J3J4J5J6J7J8J9J10

K1K2K3K4K5K6K7K8K9K10

A1A2A3A4A5A6A7A8

B1B2B3B4B5B6B7B8

C1C2C3C4C5C6C7C8

D1D2D3

D6D7D8

E1E2E3

E6E7E8

F1F2F3F4F5F6F7F8

G1G2G3G4G5G6G7G8

H1H2H3H4H5H6H7H8

A1A2

B1B2

IC54

2

R603

FB431

R615

R431

R436

R437

R438

R439

Q882

R442

C407

R443C408

CL101(LINE_OUT_L)

R834

R837

R839

R840

C611

FB851

R841

FB852

CL501(USB_IO3.1V (3.1V))

CL502(USB_IO1.8V (1.8V))

FB858

JL603

VDR860

C814

JL604

R851

JL605(VCC_ECO_J

(1.8V))

C816

JL606(VDD_GP3 (2.85V))

R853

R855

C431C432

R857

R858R859

JL801(D_GND)

R665

C436

JL610

C820

C439

JL613(UART_RXD)

JL614(UART_TXD)

R861 R862

CL907(BATT+/

VCC_VBAT)

C445

C446

C447

CL912(VDD_UNREG_J)

JL622(VDD_GP1_J

(2.85V))

CL913(VDD_DDC3_J (3.3V))

CL915(VDD_DDC2_J (2.0V))

CL916(VCC_VBUS)

CL917(VCC_DCIN)

JL433(RF_GND)

CL918(CHG_PEN2)

JL434(VDD_GP4 (2.85V) for 1SEG)

C451

JL435(1.5V for 1SEG)

JL436(S_GND)

C452

JL437 (VDD_DSP_F (1.2V))

C453

JL438(VDD_ANA_F

(2.85V) for 1SEG)

JL439 (TS_ERR)

JL631

JL440

R881

JL441 (TSPSYNC)JL442 (TSCK)

JL443 (TSDATA)

JL444

R885

CL541

CL542

R887

R888

R889

CL546(VDD_GP5 (2.85V))

CL547(1.8V for Wi-Fi)

CL548(D_GND)

JL641(VDD_ANA_F

(2.85V))

C854

JL644(VDD_HP_F (2.9V))

JL645(VDD_LOG_F

(1.8V))

JL646(XRESET

(RESET_SW))

JL647(VDD_GP5

(2.85V))

JL648(VDD_GP4 (2.85V))

R898

CN882

D431

IC802

C882

IC803

Q541Q542

IC431R305

ANT541(Wi-Fi ANTENNA)

CP431

CN301

CL5501(VDD_DDC3_J(3.3V) for Wi-Fi)

R918

R350

CL201(LINE_OUT_R)

R545

JL301(1SEG_ANT)

TH901C544

C565

C566

C568

C569

CL851

CL852 CL853

CL854

CL855 CL856

CL857

CL858(D_GND)

CL859 CL860CL861

CL862

L435

CL881(KRY_AD0)

CL882(KEY_AD1)

CL883

CL884(HOME)

TOBATTERY

ASSY

TOEL DISPLAY MODULE

CL885(GND)

B2B1

A2

A1

R409

I

FB432 FB433

R432

R435

Q881

R835

C605

R838C815

C434

CL908(BATT-)

C442

C443

C444

C448

C450

C454

D202

R882

R883

R884

L102

R886

CL543 CL544

C853

R890

C855

R891

L301

C856

L302

R892

R893

R894 R895

R896

R897

R899

CN881

C881

C883 C884C885

FB10

1

L542

R304

S881

S881(HOLD SW)

R901

CN90

1

R349

R542

R543

R546

R547

R932R934

R556

C926

C542

D102

D302

L202

L402C570

IC303 FB202

FB202(MIC_R)

FB101(MIC_L)

L102(HP_L)

L202(HP_R)

L433

L436

21

TO5PIN JACK ASSY

TOKEY FLEXIBLEPRINT BOARD

TOTOUCH PANEL

MODULE

1234

56789

10

1

3451 2 3

4567

123456789101112131415161718

19 20 2122 23 2425 26

27282930313233343536

1

2425

48

1

24 25

48

1 2 3 4

5678

9101112

13141516

1718

1920

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39 4041

1 2

34

21 43 65 87 109 1112131415161718192021 22

23 2425 26

12

3

1 23 1 2

3

1 2 3

456

123

4 5 6

1234

56

1

2

3

123

1

2 3

1 2

3 4

12345

6 7 8 9 10111213141516

17181920

21

134

12

3 4

1 2

34

1 2

3

123

4 5 6

7

12345678910

11 121314151617181920

21123456

78910

1234 5 6

1

2

2

34

123456789

1011121314151617181920

2122232425262728293031323334353637383940

41

12

3

1

1-878-460-11

(11)

MAIN BOARD (SIDE A)

12

12 3

98

13 4

5

3

15

13

26

14

17

1 23

18

15 22

29

30

23

1 7

8

1

11 10

2

13

12

13

11 1

210

13 12

1-877-866-11

(11)

MAIN BOARD (SIDE B)

1 3

46

1 4569

10

31

46

A

B

C

D

E

F

G

H

I

J

1 2 3 4 5 6 7 8 9 10 11 12

K

HOLD

29

NWZ-X1050/X1051/X1060/X1061SECTION 5

EXPLODED VIEWS

1 4-117-206-01 SCREW M1.4 2 A-1717-758-A HOLD ASSY 3 3-254-135-01 SCREW (B1.4) 4 3-234-449-47 SCREW (M1.4) 5 4-112-900-01 CATCH (PANEL)

6 4-112-904-01 PLATE (REAR) 7 4-112-905-01 SHEET (REAR), ADHESIVE 8 4-112-903-01 PANEL (REAR) (NWZ-X1050/X1060) 8 4-112-903-21 PANEL (REAR) (NWZ-X1051) 8 4-112-903-41 PANEL (REAR) (NWZ-X1061)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

Note:• -XX and -X mean standardized parts, so

they may have some difference from the original one.

• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not sup-plied.

• Color Indication of Appearance Parts Ex-ample:

KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ Parts Color Cabinet’s Color

5-1. PANEL (REAR) SECTION

• Abbreviation AUS : Australian model CH : Chinese model CND : Canadian model EE : East European model FR : French model JE : Tourist model MX : Mexican model TW : Taiwan model

1

23

4

5

6

78

not supplied

not supplied

MAIN board section

30

NWZ-X1050/X1051/X1060/X1061

5-2. MAIN BOARD SECTION

51 4-124-173-01 SHEET (JACK), INSULATION 52 4-112-892-01 HOLDER (JACK) 53 3-234-449-31 SCREW (M1.4) 54 9-885-133-37 MAIN BORAD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: E, AUS, JE) 54 9-885-133-38 MAIN BORAD, COMPLETE (16G) (for SERVICE)

(NWZ-X1050: CH)

54 9-885-133-39 MAIN BORAD, COMPLETE (16G) (for SERVICE) (NWZ-X1050: MX)

54 9-885-133-41 MAIN BORAD, COMPLETE (16G) (for SERVICE) (NWZ-X1050: AEP, UK)

54 9-885-133-43 MAIN BORAD, COMPLETE (16G) (for SERVICE) (NWZ-X1050: FR)

54 9-885-133-44 MAIN BORAD, COMPLETE (16G) (for SERVICE) (NWZ-X1050: EE)

54 9-885-133-45 MAIN BORAD, COMPLETE (16G) (for SERVICE) (NWZ-X1051)

54 9-885-133-46 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: TW)

54 9-885-133-47 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: E, AUS, JE)

54 9-885-133-48 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: CH)

54 9-885-133-49 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: MX)

54 9-885-133-50 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: CND)

54 9-885-133-51 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: AEP, UK)

54 9-885-133-53 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: FR)

54 9-885-133-54 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1060: EE)

54 9-885-133-55 MAIN BORAD, COMPLETE (32G) (for SERVICE) (NWZ-X1061)

55 4-146-231-01 SHEET (BATTERY), PROTECTION

56 4-129-122-01 CUSHION (B CONNECTOR) BATT1 X-2349-102-1 BATTERY ASSY

J001 A-1602-784-A 5PIN HP JACK ASSY


56

55

5352

51

54

53

J001

touch panel section

BATT1

31

NWZ-X1050/X1051/X1060/X1061

5-3. TOUCH PANEL SECTION

101 4-112-855-01 CUSHION (OLED) 102 4-112-862-01 SHEET (WINDOW), ADHESIVE 103 4-139-129-01 SPACER (WINDOW) 104 A-1717-757-A BUTTON (HOME) (B) ASSY 105 4-112-860-01 GUARD (MULTI)

106 4-112-856-01 FRAME 107 4-112-872-01 SHEET (LID), ADHESIVE 109 4-119-574-01 SHEET (LID_B), ADHESIVE 110 4-112-857-01 BUTTON (VOL) (− VOL +) 111 4-112-858-01 KNOB (NC)

112 4-112-889-01 BRACKET (NC) 113 A-1602-782-A HOME KEY BORAD, COMPLETE

116 4-112-886-01 CHASSIS 117 3-234-449-31 SCREW (M1.4) 118 4-124-172-01 SHEET (O-FPC), INSULATION

119 4-112-869-01 LID (TOP) 120 4-112-868-01 BUTTON (TOP) (l, 7, L) 121 4-112-891-01 SPACER (VOL) 122 4-112-870-01 BASE (TOP) 123 4-112-887-01 COVER (RESET)

CN01 1-822-382-11 CONNECTOR, DOT EL01 1-802-813-11 ELEMENT, EL INDICATOR FPC1 1-877-868-11 KEY FLEXIBLE PRINT BOARD TPM1 1-480-788-11 TOUCH PANEL MODULE


101 102

103

104105

106

107

109

110

111112

113

116

117

118

119

120

121

122

123

#B

#C

#D

#E

#A

TPM1

CN01

EL01

FPC1

Note: #A (SHEET (HOMEPWB) ADHESIVE) #B (SHEET (CATCH) ADHESIVE) #C (SHEET (BUTTON) ADHESIVE) #D (SHEET (TOP) ADHESIVE) #E (SHEET (RESET) ADHESIVE) Commercially available double-sided adhesive sheet to the size of the cut and use.

widthwidth

heig

ht

height

#A 2.5

unit: mm

2.5

#C 1.8 1.8

#D 3.2 17

#E 1 5

#B 6 9

Note: When the MAIN board is replaced, there are some notes. Refer to “NOTE THE MAIN BOARD REPLACING” (page 4) in servicing notes for notes.

32

NWZ-X1050/X1051/X1060/X1061SECTION 6

ELECTRICAL PARTS LIST

A-1602-782-A HOME KEY BOARD, COMPLETE ************************* When HOME KEY board is defective, exchange the entire mounted board.************************************************************

9-885-133-37 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: E, AUS, JE)

9-885-133-38 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: CH)

9-885-133-39 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: MX)

9-885-133-41 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: AEP, UK)

9-885-133-43 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: FR)

9-885-133-44 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1050: EE)

9-885-133-45 MAIN BOARD, COMPLETE (16G) (for SERVICE)(NWZ-X1051)

9-885-133-46 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: TW)

9-885-133-47 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: E, AUS, JE)

9-885-133-48 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: CH)

9-885-133-49 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: MX)

9-885-133-50 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: CND)

9-885-133-51 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: AEP, UK)

9-885-133-53 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: FR)

9-885-133-54 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1060: EE)

9-885-133-55 MAIN BOARD, COMPLETE (32G) (for SERVICE)(NWZ-X1061)

*********************

< CAPACITOR >

C881 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V C882 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V C883 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V C884 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V

< CONNECTOR >

CN881 (Not supplied) CONNECTOR, FFC/FPC 11P

< FET >

Q881 6-550-747-01 FET 3LP01S-K-TL-E

< RESISTOR >

R881 1-218-985-11 METAL CHIP 470K 5% 1/16W R882 1-218-953-11 METAL CHIP 1K 5% 1/16W R883 1-218-985-11 METAL CHIP 470K 5% 1/16W R884 1-240-695-91 METAL CHIP 1K 5% 1/20W R885 1-240-695-91 METAL CHIP 1K 5% 1/20W

R886 1-208-927-11 METAL CHIP 47K 0.5% 1/16W R887 1-208-927-11 METAL CHIP 47K 0.5% 1/16W R888 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R889 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R890 1-208-911-11 METAL CHIP 10K 0.5% 1/16W

R891 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R892 1-218-985-11 METAL CHIP 470K 5% 1/16W R893 1-240-726-91 METAL CHIP 470K 5% 1/20W R895 1-240-760-91 METAL CHIP 100 0.5% 1/20W R896 1-240-760-91 METAL CHIP 100 0.5% 1/20W

R897 1-218-990-81 SHORT CHIP 0

< SWITCH >

S881 1-786-455-32 SWITCH, PUSH (1 KEY) (HOLD)*************************************************************

MISCELLANEOUS **************

BATT1 X-2349-102-1 BATTERY ASSY CN01 1-822-382-11 CONNECTOR, DOT EL01 1-802-813-11 ELEMENT, EL INDICATOR FPC1 1-877-868-11 KEY FLEXIBLE PRINT BOARD J001 A-1602-784-A 5PIN HP JACK ASSY

TPM1 1-480-788-11 TOUCH PANEL MODULE*************************************************************


HOME KEY

When indicating parts by reference num-ber, please include the board name.

Note:• Due to standardization, replacements in

the parts list may be different from the parts specifi ed in the diagrams or the com-ponents used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.

• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.

• RESISTORS All resistors are in ohms. METAL: Metal-fi lm resistor. METAL OXIDE: Metal oxide-fi lm resistor. F: nonfl ammable• CAPACITORS uF: μF• COILS uH: μH• SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. .

• Abbreviation AUS : Australian model CH : Chinese model CND : Canadian model EE : East European model FR : French model JE : Tourist model MX : Mexican model TW : Taiwan model


MAIN

Note 1: In this set, only a part of parts that relate to the switch are supplied. Replace a part according to “METHOD OF JUDGING RIGHT AND WRONG OF PARTS RELATED TO SWITCH” (page 7) in servicing notes. Exchange the entire mounted board when parts that do not correspond to it are defective.

Ref. No. Part No. Description Remark

NWZ-X1050/X1051/X1060/X1061

3333

ACCESSORIES ************

1-477-125-23 ADAPTOR, PLUG (DUAL) (Plug adaptor for in-fl ight use (single/dual))

1-835-737-12 CONNECTION CORD (EXTERNAL AUDIO) (Audio input cable)

1-835-940-11 CORD, PC CONNECTION (USB cable) 4-137-988-11 MANUAL (QSG), INSTRUCTION

(Quick Start Guide) (ENGLISH) 4-137-988-21 MANUAL (QSG), INSTRUCTION

(Quick Start Guide) (FRENCH) (CND, AEP, UK, FR)

4-137-988-31 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (GERMAN) (AEP, UK)

4-137-988-41 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (SPANISH) (AEP, UK, MX)

4-137-988-51 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (ITALIAN) (AEP, UK)

4-137-988-61 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (RUSSIAN) (EE)

4-137-988-71 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (SIMPLIFIED CHINESE)

(E, AUS, CH, JE)

4-137-988-81 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (TRADITIONAL CHINESE)

(E, AUS, TW, JE) 4-137-988-91 MANUAL (QSG), INSTRUCTION

(Quick Start Guide) (KOREAN) (E, AUS, JE) 4-137-989-11 MANUAL (QSG), INSTRUCTION

(Quick Start Guide) (UKRAINIAN) (EE) 4-137-989-31 MANUAL (QSG), INSTRUCTION

(Quick Start Guide) (ARABIC) (E, AUS, JE) X-2349-337-1 SOFT APPLICATION ASSY (CD-ROM: Windows

Media Player 11/Content Transfer/Operation Guide (PDF fi le)) (NWZ-X1051/X1061)

X-2349-338-1 SOFT APPLICATION ASSY (CD-ROM: Media Manager for WALKMAN/Windows Media Player 11/

Content Transfer/ Operation Guide (PDF fi le)) (NWZ-X1050/X1060)

501 4-112-967-01 ATTACHMENT (SP) (Use when connecting the player to the optional cradle, etc.)

502 A-1565-550-A MDR-NC020LP/BM19 (SET) (Headphones) (Including RUBBER RING and EARBUDS

(size S/M/L)) 503 2-699-564-02 RING, RUBBER 504 3-272-845-21 PIECE (S), EAR (Earbud) (size S) 504 3-272-846-21 PIECE (M), EAR (Earbud) (size M)

504 3-272-847-21 PIECE (L), EAR (Earbud) (size L)

501 502

504

503 RUBBER RING

503 RUBBER RING

EARBUD

504 EARBUD

ATTACHMENT (SP) HEAD PHONES

NWZ-X1050/X1051/X1060/X1061

REVISION HISTORY

Checking the version allows you to jump to the revised page.Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

Ver. Date Description of Revision1.0 2009.05 New

SERVICE MANUAL - Xavier...

Documents

Transcript of SERVICE MANUAL - Xavier...