SeriesCCatalog Cwb Fan

Centrifugal Exhaust FansSeries C

Roof Upblast and Sidewall

January2005

Series C – Spun AluminumRoof Upblast & Sidewall Centrifugal Exhaust FansWhen you buy a Greenheck Series C, you receive a fan with the industry’s best performance and durability forgeneral clean air, high grease, and other contaminant applications (as found in restaurants, food service, andfume hood exhaust). Both Roof Upblast and Sidewall configurations are specifically designed to discharge airdirectly away from the mounting surface.

• Broadest performance in the industry, up to 5 in. wg and 30,000 cfm.

• Most advanced motor cooling of any fan in its class.

• Greenheck pioneered leakproof construction for the entire life of the fan utilizing a one-piece windband that is continuously welded to the curb cap.

• Performance as cataloged is assured. All fan sizes aretested in our AMCA Accredited Laboratory, and all modelsare licensed to bear the AMCA sound and airperformance seals.

• UL Listed for electrical and grease.

• Greenheck subjects these products toextensive life testing, assuring you thatthe fans will provide many years ofreliable performance.

2

The Industry StandardOver the past 40 years, we have listened to your inputand needs to remain the industry leader with theSeries C. This results in:

• Specified 2 to 1 over any other fan in its class.

• Number 1 in product quality and reliability.

• Number 1 in combined reputation and after-saleservice/support.

• Over 100 times a day a new Series C fan is put intoservice.

Restaurants of all types, schools, and manufacturingfacilities to name a few, turn to the Series C to meettheir requirements.

Greenheck Fan Corporation certifies that the ModelsCUE, CUBE, CW and CWB fans shown herein arelicensed to bear the AMCA Seal. The ratings shown arebased on tests and procedures performed inaccordance with AMCA Publication 211 and Publication311 and comply with the requirements of the AMCACertified Ratings Program. The certified ratings forModels CUE, CUBE, CW, and CWB are shown onpages 8 to 33.

CUE, CUBE, CW, andCWB models are listed forelectrical (UL/cUL 705)File no. E40001

CUE, CUBE, CW, andCWB models are listedfor grease removal(UL/cUL 762) File no.MH11745

Quick Delivery and Quick Build ProgramsYou can order from more than 40 Series C configurations, hundreds of in-stock ventilation products,and accessories that can ship to your job site, in less than 24 hours from our four strategically locatedwarehouses. Speed up your process evenmore, order your units over the Internetusing QD Online atwww.greenheck.com/qd

For other sizes and configurationswhere rapid response time isrequired, our Quick Build (QB)Program can manufacture and shipyour custom products in one, three,five or ten days.

World Class ManufacturingOur advanced manufacturing processes, superior engineering, and quality control procedures always ensure thehighest product quality. Our skilled production workers use cost-effective machines and unique die designs built byour own engineers to add innovative features and greater strength to our centrifugal exhaust fans. And just to be sureyou get the peace-of-mind you expect when you specify Greenheck, our assembly inspectors test run and monitorevery fan before it leaves the factory.

3

Leading Edge Technical Support When you need extensive product and IOM (Installation and Operating Manual)information, our products are supported by the industry's best product literature,

electronic media, and computer aided selection program (CAPS). You’ll also find thisinformation on our website at www.greenheck.com

You can always count on personal service and expertise from our nationaland international representative organization. To locate your nearestGreenheck representative, call 715-359-6171 or visit our website atwww.greenheck.com

4

Roof Upblast and Sidewall - Model Comparison

Performance

CUE & CW Direct DriveAvailable in fourteen sizes with nominal wheeldiameters ranging from 9 through 20 inches.

(Sizes 060 through 200)

Capacities range from 70 to 6,400 cfm with staticpressures to 2-1/4 in. wg

CUBE & CWB Belt DriveAvailable in fourteen sizes with nominal wheeldiameters ranging from 9 through 48 inches

(Models CUBE-098 through CUBE-480).

Capacities range from 200 through 30,000 cfm withstatic pressures to 1.5 in. wg

(Models CWB-098 through CWB-300)

Capacities range from 200 through 12,000 cfm withstatic pressures to 1.5 in. wg

CUBE-HP & CWB-HPBelt DriveAvailable in nine sizes with nominal wheeldiameters ranging from 10 through 36 inches

(Models CUBE-101HP through CUBE-360HP).Capacities range from 200 through 17,000 cfmwith static pressures to 2.5 in. wg

(Models CWB-101HP through CWB-300HP).Capacities range from 200 through 9,000 cfmwith static pressures to 2.5 in. wg

CUBE-XPBelt DriveAvailable in four sizes with nominal wheeldiameters ranging from 14 through 24inches

(Models CUBE-161XP, 240XP, 300XP, and360XP). Capacities range from 700 through10,700 cfm with static pressures to 5 in. wg

Extended Pressure Models

High Pressure Models

Standard Models

®

WHEEL - An aluminum, backward-inclined, non-overloading centrifugal wheel is utilized to generate highefficiency and minimal sound. Wheel cones are carefullymatched to the venturi for maximum efficiency. Eachwheel is statically and dynamically balanced for long lifeand quiet operation.

DISCONNECT SWITCH - Nema-1 switch is factorymounted and wiring is provided from the motor asstandard (other switches are available). All wiring andelectrical components comply with the National ElectricCodes (NEC) and are either UL listed or recognized.

FAN SHAFT - Is precisely sized, ground, and polished sothe first critical speed is at least 25% over the maximumoperating speed. Where the shaft makes contact withbearings, close tolerances result in longer bearing life.

BEARINGS - 100% factory tested and designedspecifically for air handling applications with a minimum(L10) life in excess of 100,000 hours.

MOTOR - Carefully matched to the fan load and ismounted out of air stream.

MOTOR COVER - Constructed of aluminum and is easilyremoved for access to the motor compartment and driveassembly.

MOTOR COOLING - Cooling fins located on top of fanwheel draw outside air through a large breather tubedirectly into the motor compartment. Positive motorcooling with fresh air results in maximum motor life.

VIBRATION ISOLATION - True vibration isolators are twoindependent studs with rubber neoprene which supportthe drive assembly and wheel for long life and quietoperation. (No steel to steel contact)

DRIVE ASSEMBLY - Belts, pulleys, and keys are oversized150% of driven horsepower. Machined cast pulleys areadjustable for final system balancing. Belts are static freeand oil resistant.

WINDBAND - One piece, heavy gauge aluminum with arolled bead for extra strength directs exhaust air awayfrom the mounting surface. The curb cap and integraldeep spun venturi are attached to the windband and alsoconstructed of aluminum to prevent corrosion.

LEAKPROOF CONSTRUCTION - The one-piece windbandis continuously welded to the curb cap and drain trough,for leakproof protection on CUE and CUBE sizes, 98through 360 and all sizes with UL and CUL-762.

CURBCAPS WITH MOUNTING HOLES - Curb cap hasprepunched mounting holes to ensure correct attachmentto the roof. (Roof Upblast only)

DRAIN TROUGH - Allows for one-point drainage of water,grease, and other residues. (Roof Upblast only)

GALVANIZED BIRDSCREEN - Galvanized rigid wireprotects the fan’s discharge from birds or small objects.(Standard on Sidewall)

MOUNTING PLATE - Allows mounting and sealing to thewall prior to locating the entire unit. The remainder of theunit is attached to the mounting plate without locatingand fastening problems associated with mounting a heavysidewall unit to a wall. (Sidewall Only)

INTERNAL CONDUIT CHASE - For easy internal electricalwiring in applications not subject to NFPA.

NAME PLATE - Permanent stamped aluminum plate forexact model and serial identification.

Roof Upblast and Sidewall Construction Features

12

11

10

9

8

7

6

5

4

3

2

1

13

14

15

5

14

15

2

1

3

5

6

4

7

8

9

10

11

12

13

®

6

Options and Accessories

®

SELF DRAINING GREASE SYSTEM - Drain grease and rainwater back through the ductworkinto the specially designedGreenheck hood. The hood thenchannels grease and rain waterinto the restaurant's floor greasetrap.

COATINGS - Wide variety ofcoatings and colors are availablefor decorative to acidicapplications.

BIRDSCREEN - Galvanized or aluminum rigid wire toprotect the fan’s discharge from birds or small objects.(Galvanized is standard on Sidewall)

CURB SEAL - Rubber seal between fan and curb to assureproper sealing when attached to a curb.

ROOF CURBS - Widevariety of roof curbs areavailable for mounting thefan to the roof, including:vented, flanged, pitched, and sound-absorbing.

VENTED CURB EXTENSION -Mounts between roof curband roof mounted fans tomeet NFPA requirements of 40in. minimum discharge abovethe roof when mounted on aminimum 8 in. high roof curb.

WINDBAND EXTENSION - Aluminum tube that raises fansdischarge an additional 36 in. for special code requirements.

TIE DOWN POINTS - Four brackets located on thewindband for securing the fan in heavy wind applications.

DAMPERS - Designed to preventoutside air from entering backinto the building when fan is off.Includes: backdraft andmotorized dampers.

(N/A w/ UL/cUL 762)

DRAIN CONNECTION -Allows for single point drainage of grease, water or other residues. (RoofUpblast only)

GREASE TRAP - Aluminumtrap designed to collectgrease residue to avoiddrainage onto roof surface.(Roof Upblast only)

GREASE TRAP WITHABSORBENT MATERIAL -Same as above with anabsorbent material to collectgrease residue for easydisposal. (Roof Upblast only)

SPEED CONTROLLERS -Available for use with shaded poleand permanent split capacitoropen motors on direct drive fans.They provide an economicalmeans of system balancing.

CUE, CUBE, CW, and CWB modelsare listed for electrical (UL/cUL 705)File no. E40001

CUE, CUBE, CW, and CWB modelsare listed for grease removal(UL/cUL 762) File no. MH11745

NON STICK WHEEL -Patented coating helpsprevent wheel imbalancein heavy greaseapplications and allowsbuildup on wheel to beeasily removed. PatentNo. 5,809,993

CLEAN OUT PORT -Patented removable plugallows for easy spray orsteam cleaning of wheelthrough the windband.(Roof Upblast only)Patent No. 5,809,993

HINGE KIT - Allowsmaintenance personnel tohinge the entire fan up togain access to wheel andductwork for regularinspection and cleaning.(Roof Upblast only)

DISCONNECT SWITCHES -Assorted Nema ratedswitches are available forpositive electrical shutoffand safety, including: dust-tight, rainproof, andcorrosion-resistant.

7

Typical Installations

Typical Installation - Commercial Kitchen (Grease)

Sizes 098 and larger are designed to meet restaurant and food service applications. These fans are UL and cUL Listed for greaseremoval and have been tested under high temperature (400 degrees F) and abnormal flare-up (600 degrees F) conditions.

Due to high temperatures and grease-laden air streams in commercial kitchen ventilation, system designers must be aware ofgoverning codes and guidelines. The National Fire Protection Association (NFPA) is the primary source upon where many codes forcommercial kitchens ventilation are based. Selected information from NFPA is shown below. Local code authorities should beconsulted before proceeding with any kitchen ventilation project.

Exhaust fans used in kitchen ventilation applications must have external wiring. (Wiring must not be installed in air stream.)Installation must include a means for inspecting, cleaning and servicing the exhaust fan. (e.g. Hinged Curb Cap)No dampers are to be installed in the system.

Welded Ductby others

min. of 18 in.above roofdeck per

NFPA

Disconnectfactory wiredfrom motor todisconnectthrough thebreather tube

(Optional)

Liquid TightFlexible Conduitby Others

RecommendedRoof Opening

Roof Deck

Minimum 40 in.Discharge

Height

8 in. min.

GreaseTrap

Vented CurbExtension

External Wiring

Welded Ductby OthersRecommended

Wall Opening

MountingBolt Hole

Circle

Wall

Liquid TightFlexible Conduitby Others

External Wiring

Factory wiredmotor todisconnect

Damper

RecommendedWall Opening

MountingBolt Hole

Circle

RecommendedDuct and

Damper Size

Wall

Wiring byothers

Series C exhaust fans are designedfor applications ranging from cleanair to contaminated air. A typicalinstallation is shown.

Note: Above installations are recommendations based on nationalcodes. Local authority may supersede these recommendations.

RecommendedDuct and

Damper Size

RecommendedRoof Opening

Wiring byOthers

Factory WiredMotor toDisconnect

Roof Deck

Damper8" or 12" in.

Model Number Code

Fan Size060 through 480

C UBE - 240 XP - 5

C-Series fan

ConfigurationUBE - Belt Drive Roof Mounted

UE - Direct Drive Roof Mounted

WB - Belt Drive Wall Mounted

W - Direct Drive Wall Mounted

Motor HP (Belt Drive only)4 = 1/4 10 = 1 30 = 33 = 1/3 15 = 1 1/2 50 = 55 = 1/2 20 = 2 75 = 7 1/27 = 3/4

Pressure Level (Belt Drive only)HP - High Pressure WheelXP - Extended High Pressure Wheel

Motor RPM (Direct Drive only)A = 1725 D = 1550B = 1140 E = 1050C = 860 G = 1300

The Model number system is designed to completely identify the fan. The correct code letters must be specified to designatebelt or direct drive and roof or wall mounted configurations. The remainder of the model number is determined by the size andperformance selected from pages 12 through 35.

Typical Installation - General Clean Air or Fume Hood (Non Grease)

SIZE 060-095 PERFORMANCE DATASeries CDirect DriveExhaust Fans

Series CDirect DriveExhaust Fans

1050 RPM

1300 RPM

1550 RPM

Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

E

F

G

Size 060-095 Dimensional Data

13/4 in.

B

CD

A

All Dimensions are in inches.** Weight shown is largest cataloged Open Drip Proof motor.

CUE

CW

8

Performance shown is for installation type A: Free inlet, Free outlet. Performance ratings do notinclude the effects of appurtenances in the airstream.

Dimensional Model CWData 060 - 075 080 - 090 095

E 183⁄8 21 21F 131⁄2 133⁄8 151⁄4

G 143⁄4 177⁄8 177⁄8

Wall Opening 81⁄2 x 81⁄2 101⁄2 x 101⁄2 101⁄2 x 101⁄2

Damper Size 8 x 8 10 x 10 10 x 10Damper Fr. Size 10 x 10 12 x 12 12 x 12Mtg. Bolt Circle 113⁄4 15 15Unit Weight** 29 40 40

Dimensional Model CUEData 060 - 075 080 - 090 095

A 17 19 19B 183⁄8 21 21C 131⁄2 133⁄8 151⁄4

D 113⁄8 111⁄2 137⁄16

Damper Size 8 x 8 10 x 10 10 x 10Roof Opening 101⁄2 x 101⁄2 121⁄2 x 121⁄2 121⁄2 x 121⁄2Unit Weight** 29 40 40

ROOF UPBLAST AND SIDEWALL

STATIC PRESSURE IN INCHES OF W.G.DRIVE MODEL HP RPM 0 0.10 0.125 0.25 0.375 0.50 0.625

Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP

060-E 1/200 1050 133 94 81DIRECT 1.7 0.006 1.7 0.006 1.7 0.007

CUE 060-G 1/100 1300 165 134 126 70& 2.8 0.012 2.5 0.012 2.5 0.012 2.5 0.012

CW 060-D 1/60 1550 197 169 164 1284.2 0.02 3.9 0.02 3.9 0.02 4.0 0.021

Size 060

065-E 1/100 1050 180 126 109DIRECT 2.2 0.008 1.9 0.009 2.0 0.009

CUE 065-G 1/60 1300 223 181 170 97& 3.2 0.015 3.1 0.016 3.1 0.017 2.9 0.015

CW 065-D 1/30 1550 266 231 222 172 954.7 0.026 4.2 0.027 4.2 0.028 4.1 0.028 3.9 0.025

Size 065

070-E 1/100 1050 250 193 171DIRECT 2.6 0.007 1.6 0.008 1.4 0.008

CUE 070-G 1/60 1300 309 267 255 152& 4.0 0.014 3.4 0.015 3.3 0.015 2.4 0.013

CW 070-D 1/30 1550 369 333 325 269 1605.5 0.023 5.2 0.025 5.1 0.025 4.7 0.026 3.9 0.022

Size 070

075-E 1/80 1050 287 210 188DIRECT 3.4 0.012 2.8 0.012 2.7 0.012

CUE 075-G 1/50 1300 356 294 279 185& 4.0 0.023 3.7 0.023 3.7 0.024 3.4 0.021

CW 075-D 1/25 1550 424 372 359 291 2046.0 0.039 5.4 0.039 5.3 0.039 4.9 0.039 4.8 0.035

Size 075

080-E 1/40 1050 325 265 247 133DIRECT 3.8 0.012 3.7 0.014 3.6 0.015 4.2 0.016

CUE 080-G 1/30 1300 403 356 343 272 173& 5.4 0.022 5.4 0.025 5.4 0.026 5.5 0.031 5.9 0.031

CW 080-D 1/20 1550 480 441 431 376 314 2357.3 0.037 7.3 0.041 7.3 0.042 7.2 0.048 7.3 0.052 7.6 0.053

Size 080

085-E 1/40 1050 389 323 305 182DIRECT 4.0 0.012 3.9 0.016 3.9 0.017 4.3 0.018

CUE 085-G 1/30 1300 481 430 416 340 235& 5.4 0.024 5.3 0.027 5.3 0.029 5.3 0.034 5.5 0.035

CW 085-D 1/20 1550 574 532 520 461 395 312 1617.5 0.04 7.4 0.044 7.4 0.045 7.4 0.052 7.4 0.058 7.6 0.061 8.1 0.051

Size 085

090-E 1/40 1050 549 470 451 306DIRECT 4.1 0.019 3.9 0.023 3.9 0.024 4.2 0.027

CUE 090-G 1/25 1300 680 616 600 517 391& 5.5 0.035 5.4 0.041 5.4 0.042 5.4 0.048 5.6 0.052

CW 090-D 1/15 1550 811 757 744 677 604 501 3477.8 0.06 7.6 0.066 7.6 0.068 7.5 0.076 7.4 0.082 7.4 0.087 7.8 0.084

Size 090

095-E 1/30 1050 711 603 570 381DIRECT 5.3 0.032 4.5 0.036 4.5 0.037 4.5 0.037

CUE 095-G 1/12 1300 880 797 774 641 484 199& 7.5 0.061 6.8 0.066 6.7 0.067 6.4 0.072 6.4 0.071 6.8 0.054

CW 095-D 1/8 1550 1049 983 964 861 747 616 4429.6 0.1 9.3 0.11 9.3 0.11 8.5 0.12 8.3 0.12 8.1 0.12 7.8 0.11

Size 095

Performance shown is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances in theairstream.

The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301.Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

9

®

STANDARD PERFORMANCE

SIZE 098-200 PERFORMANCE DATA

10




860 RPM

1140 RPM

1725 RPM

Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

E

F

G

Size 098-200 Dimensional Data

13/4 in.

B

CD

A

All Dimensions are in inches.** Weight shown is largest cataloged Open Drip Proof motor.

CUE

CW

Dimensional Model CWData 098 - 131 141 - 161 (HP) 180 - 200

E 247⁄8 287⁄8 353⁄8F 281⁄4 293⁄4 285⁄8G 193⁄4 221⁄8 273⁄4

Wall Opening 121⁄2 x 121⁄2 151⁄2 x 151⁄2 171⁄2 x 171⁄2Damper Size 12 x 12 15 x 15 17 x 17

Damper Fr. Size 14 x 14 17 x 17 19 x 19Mtg. Bolt Circle 167⁄8 193⁄8 25Unit Weight** 64 90 127

Max Motor 56 145T 184TFrame Size

Dimensional Model CUEData 098 - 131 141 - 161 (HP) 180 - 200

A 19 22 30B 247⁄8 287⁄8 353⁄8

C 281⁄4 293⁄4 285⁄8

D 173⁄8 193⁄8 21Damper Size 12 x 12 16 x 16 18 x 18Roof Opening 141⁄2 x 141⁄2 181⁄2 x 181⁄2 201⁄2 x 201⁄2Unit Weight** 64 60 142

Max Motor 56 145T 184TFrame Size


Performance shown is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances in theairstream.


11

®

STATIC PRESSURE IN INCHES OF W.G.DRIVE MODEL HP RPM 0 0.125 0.25 0.50 0.75 1.00 1.25 1.50

Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP

098-C 1/8 860 588 409DIRECT 8.4 0.02 8.7 0.02

CUE 98-B 1/6 1140 780 656 502& 9.1 0.05 8.7 0.06 8.3 0.06

CW 98-A 1/4 1725 1180 1094 1017 824 58613.8 0.18 13.4 0.18 13.0 0.18 12.2 0.20 12.3 0.20

Size 098

101-C 1/8 860 732 625 481DIRECT 4.6 0.03 2.4 0.04 0.6 0.04

CUE 101-B 1/6 1140 970 897 806& 7.2 0.07 7.0 0.08 6.5 0.08

CW 101-A 1/4 1725 1468 1422 1373 1255 1129 97013.3 0.24 12.9 0.26 12.5 0.27 11.7 0.29 10.8 0.29 9.7 0.29

Size 101

Size 121

131-C 1/8 860 1180 1057 914DIRECT 8.5 0.06 8.3 0.07 7.7 0.07

CUE 131-B 1/6 1140 1564 1471 1379 1144& 12.5 0.14 12.2 0.15 11.8 0.16 10.3 0.17

CW 131-A 3/4 1725 2366 2305 2244 2122 1994 1838 1646 136518.8 0.50 18.6 0.51 18.4 0.53 18.0 0.56 17.2 0.58 16.4 0.60 15.3 0.60 14.1 0.57

Size 131

141-C 1/8 860 1558 1427 1264DIRECT 7.3 0.11 7.5 0.12 7.1 0.12

CUE 141-B 1/4 1140 2065 1973 1864 1605 1167& 11.3 0.25 11.3 0.26 11.0 0.27 10.3 0.29 10.0 0.27

CW 141-A 1 1725 3125 3066 3005 2865 2711 2539 2339 208526 0.87 23 0.89 22 0.90 24 0.94 15.1 0.97 13.4 0.99 14.3 1.00 13.8 0.98

Size 141

DIRECT 161-C 1/4 860 2472 2315 2126 1680CUE 10.7 0.22 10.2 0.24 9.9 0.25 9.5 0.24

& 161-B 1/2 1140 3277 3161 3035 2745 2421 1983CW 15.7 0.51 15.2 0.55 14.8 0.57 14.1 0.58 13.5 0.57 12.9 0.55

Size 161

STATIC PRESSURE IN INCHES OF W.G.DRIVE MODEL HP RPM 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25

Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHPDIRECT 161HP-B 1/3 1140 1645 1444 1175

CUE 12.5 0.31 11.9 0.32 11.1 0.32& 161HP-A 11⁄2 1725 2787 2680 2560 2439 2310 2167 2003 1810

CW 22 0.97 22 1.01 21 1.04 20 1.07 20 1.10 19.6 1.11 18.3 1.12 16.6 1.11

Size 161HP

DIRECT 200-C 3/4 860 4837 4587 4346 3815 3084CUE 15.7 0.71 15.7 0.73 14.6 0.74 12.9 0.75 11.9 0.74

& 200-B 2 1140 6412 6224 6036 5674 5283 4837 4276 3445CW 24 1.65 24 1.68 23 1.70 22 1.74 21 1.74 20 1.74 19.2 1.73 19.9 1.63

Size 200

121-C 1/8 860 1015 905 781DIRECT 5.3 0.05 5.7 0.05 5.6 0.06

CUE 121-B 1/6 1140 1346 1261 1180 981& 7.4 0.11 7.9 0.12 8.2 0.13 8.0 0.14

CW 121-A 1/2 1725 2037 1979 1923 1816 1710 1571 1406 117615.6 0.39 16.1 0.40 16.7 0.42 17.9 0.44 18.4 0.46 18.7 0.47 18.6 0.48 18.4 0.46

DIRECT 180-C 1/2 860 3249 3074 2922 2474CUE 12.3 0.34 11.7 0.37 11.1 0.39 10.2 0.40

& 180-B 1 1140 4307 4173 4045 3822 3470 3072 2477CW 17.6 0.80 17.1 0.83 16.5 0.86 16.1 0.91 15.4 0.93 14.6 0.92 13.6 0.85

Size 180

HIGH PRESSURE PERFORMANCE


12

Size 098/101 Dimensional Data


Damper Size = 12 x 12 Roof Opening = 14 1/2 x 14 1/2Windband Thickness= 0.051 Motor Cover Thickness = 0.040Curb Cap Metal Thickness = 0.064 Unit Weight**=58 lbs.

13/4

247/8

281/4*

173/8

19

CUBE

Wall Opening = 12 1/2 x 12 1/2 Mtg. Bolt Circle = 16 7/8Damper Size = 12 x 12 Windband Thickness= 0.051Damper Frame Size = 14 x 14 Motor Cover Thickness = 0.040Unit Weight**= 58 lbs.

All Dimensions are in inches.*May be greater depending on motor**Weight shown is largest cataloged Open Drip Proof Motor

Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

247/8

281/4*

193/4

CWB



SIZE 101 PERFORMANCE DATA

SIZE 098 PERFORMANCE DATASeries CBelt DriveExhaust Fans

Series CBelt DriveExhaust Fans


Performance shown is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include drive losses. Performance ratingsdo not include the effects of appurtenances in the airstream.


13

®

STATIC PRESSURE IN INCHES OF W.G.DRIVE MODEL HP RPM 0.50 0.625 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50

Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP Sones BHP

1300 335 1826.0 0.07 6.3 0.06

101HP-4 1/41550 497 445 379

7.9 0.11 7.6 0.11 7.3 0.11

1800 637 595 550 44510.6 0.18 10.1 0.18 9.8 0.18 9.3 0.18

BELT 2045 761 729 693 615 522 346CUBE 13.9 0.24 13.5 0.26 12.7 0.26 12.1 0.26 11.5 0.26 11.4 0.23

&

101HP-3 1/32150 812 782 752 678 600 500

CWB 14.1 0.28 14.1 0.29 13.5 0.30 12.5 0.30 12.0 0.30 11.5 0.30

2250 860 832 804 737 665 579 45614.4 0.32 14.4 0.33 14.2 0.34 13.2 0.35 12.5 0.35 11.9 0.35 11.6 0.32

2415 938 914 887 831 765 697 614 498

101HP-5 1/2 15.1 0.39 15.0 0.39 15.0 0.41 14.5 0.43 13.7 0.43 12.9 0.43 12.2 0.43 12.0 0.40

2580 1014 992 969 919 861 799 735 655 550 32316.8 0.48 16.4 0.48 16.0 0.49 15.7 0.52 15.1 0.53 14.4 0.53 13.7 0.53 13.2 0.53 12.9 0.49 12.5 0.43

AVG. DISCHARGE VEL. (FPM) - CFM/1.28 MAXIMUM RPM - 1725MAX. BHP AT A GIVEN RPM - (RPM/3099)3 MAX. MOTOR FRAME SIZE - 56TIP SPEED = RPM X 2.846

STATIC PRESSURE IN INCHES OF W.G.DRIVE MODEL HP RPM 0 0.125 0.25 0.375 0.50 0.625 0.75 0.875 1.00 1.25


960 817 724 6115.6 0.04 4.5 0.05 3.3 0.05

1100 936 859 765 6576.9 0.06 6.6 0.07 6.1 0.08 5.7 0.08

1240 1056 989 908 821 715BELT 101-4 1/4 7.9 0.09 7.9 0.10 7.5 0.11 6.8 0.11 6.4 0.11CUBE 1380 1175 1116 1046 971 890 790

& 9.4 0.12 9.3 0.14 9.1 0.14 8.5 0.15 7.9 0.15 7.4 0.15CWB 1520 1294 1241 1181 1113 1045 969 878 717

11.5 0.17 11.3 0.18 11.0 0.19 10.7 0.19 10.2 0.20 9.5 0.20 9.0 0.20 8.7 0.18

1660 1413 1365 1313 1251 1189 1125 1056 974 86112.7 0.22 12.3 0.23 12.0 0.24 11.6 0.25 11.3 0.26 10.8 0.26 10.2 0.26 9.6 0.26 9.4 0.25

1740 1481 1435 1386 1329 1270 1210 1146 1079 991

101-3 1/3 13.4 0.25 13.0 0.26 12.6 0.27 12.1 0.28 11.8 0.29 11.4 0.30 10.9 0.30 10.4 0.30 9.7 0.30

1820 1549 1505 1459 1406 1350 1293 1234 1171 1106 90014.3 0.28 13.7 0.30 13.4 0.31 12.7 0.32 12.4 0.33 12.0 0.34 11.6 0.35 11.2 0.35 10.6 0.35 10.1 0.33







650 445 357 2398.1 0.01 8.5 0.01 9.9 0.01

920 629 567 505 468 3398.6 0.03 8.5 0.03 8.5 0.03 8.5 0.03 8.8 0.03

1055 721 666 615 587 485 410BELT 8.9 0.04 8.7 0.04 8.6 0.04 8.6 0.05 8.4 0.05 8.4 0.05CUBE 1190 814 763 720 696 617 553 373

& 098-4 1/4 9.5 0.06 9.3 0.06 9.1 0.06 9.0 0.06 8.8 0.07 8.7 0.07 8.4 0.07CWB 1325 906 860 820 800 735 685 540 353

10.7 0.08 10.5 0.08 10.3 0.08 10.2 0.08 10.2 0.09 10.0 0.09 9.7 0.09 9.6 0.09

1460 998 957 918 901 845 803 679 54212.0 0.11 11.8 0.11 11.6 0.11 11.6 0.11 11.5 0.12 11.5 0.12 11.2 0.12 11.2 0.12

1595 1091 1053 1016 1000 950 914 813 692 56013.2 0.14 13.1 0.14 12.8 0.14 12.8 0.14 12.5 0.14 12.5 0.15 12.3 0.16 12.1 0.16 12.2 0.16

1725 1180 1144 1109 1094 1049 1017 929 824 712 58613.8 0.18 13.6 0.18 13.5 0.18 13.4 0.18 13.1 0.18 13.0 0.18 12.7 0.20 12.2 0.20 12.1 0.20 12.3 0.20



14




Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

247/8

281/4*

193/4


13/4

247/8

281/4*

173/8

19

CUBE

CWB



Size 121/131 Dimensional Data







15

®



685 809 6704.4 0.02 4.4 0.03

789 932 812 6634.9 0.04 5.2 0.04 5.2 0.05

893 1054 947 834 6665.5 0.05 5.9 0.06 5.9 0.07 5.9 0.07

997 1177 1081 989 865 682

121-4 1/4 6.2 0.08 6.6 0.08 6.7 0.09 6.6 0.09 6.7 0.09

1101 1300 1212 1128 1032 909 724BELT 6.9 0.10 7.4 0.11 7.7 0.12 7.7 0.12 7.4 0.13 7.6 0.12CUBE 1205 1423 1342 1265 1188 1087 965 790

& 8.2 0.13 8.7 0.14 9.1 0.15 9.2 0.16 9.1 0.16 9.0 0.16 9.0 0.16CWB 1309 1546 1470 1399 1329 1249 1153 1035

9.7 0.17 10.3 0.18 10.9 0.19 11.0 0.20 11.0 0.21 11.0 0.21 10.9 0.21

1410 1665 1595 1528 1463 1398 1315 1224 96511.1 0.21 11.6 0.22 12.2 0.23 12.5 0.24 12.6 0.25 12.7 0.26 12.7 0.26 12.3 0.25

1480 1748 1681 1617 1555 1493 1421 1338 1132

121-3 1/3 11.9 0.25 12.4 0.26 13.1 0.27 13.5 0.28 13.7 0.29 13.8 0.30 13.8 0.30 13.6 0.30

1545 1824 1760 1699 1639 1580 1518 1441 1262 99012.8 0.28 13.4 0.29 14.0 0.30 14.5 0.31 14.7 0.32 14.8 0.33 14.9 0.34 14.9 0.34 14.6 0.33

1635 1931 1870 1811 1755 1699 1643 1577 1424 1226

121-5 1/2 14.1 0.33 14.7 0.34 15.2 0.36 15.9 0.37 16.2 0.38 16.4 0.39 16.6 0.40 16.7 0.41 16.5 0.40

1725 2037 1979 1923 1869 1816 1763 1710 1571 1406 117615.6 0.39 16.1 0.40 16.7 0.42 17.3 0.43 17.9 0.44 18.2 0.45 18.4 0.46 18.7 0.47 18.6 0.48 18.4 0.46



650 892 7246.2 0.03 6.0 0.03

743 1019 876 6687.1 0.04 6.9 0.05 6.2 0.05

836 1147 1021 8688.2 0.06 8.0 0.06 7.4 0.07

929 1274 1161 1042 864

131-4 1/4 9.6 0.08 9.4 0.09 8.8 0.09 8.0 0.09

1022 1402 1299 1193 1060 869BELT 11.1 0.10 10.8 0.11 10.3 0.12 9.6 0.13 8.7 0.12CUBE 1115 1529 1435 1341 1235 1094 886

& 12.2 0.13 11.9 0.14 11.5 0.15 10.9 0.16 10.0 0.16 9.3 0.15CWB 1208 1657 1570 1483 1391 1277 1136 928

13.4 0.17 13.1 0.18 12.7 0.19 12.2 0.20 11.4 0.21 10.6 0.21 10.0 0.19

1305 1790 1709 1629 1547 1458 1340 1201 100314.6 0.22 14.3 0.23 13.9 0.24 13.5 0.25 13.0 0.26 12.0 0.26 11.5 0.26 10.8 0.24

131-3 1/3 1435 1968 1895 1822 1749 1671 1586 1479 1358 119815.7 0.29 15.5 0.30 15.1 0.31 14.8 0.32 14.3 0.33 13.8 0.34 13.1 0.35 12.5 0.34 11.9 0.33

1540 2112 2044 1976 1908 1838 1764 1678 1577 146516.7 0.35 16.5 0.37 16.2 0.38 16.0 0.39 15.6 0.41 15.2 0.42 14.6 0.43 14.0 0.43 13.4 0.43

131-5 1/2 1592 2183 2117 2052 1986 1920 1848 1774 1678 1578 130117.3 0.39 17.0 0.41 16.8 0.42 16.6 0.43 16.2 0.45 15.8 0.46 15.3 0.47 14.8 0.47 14.3 0.47 13.0 0.45

1645 2256 2192 2128 2065 2001 1933 1864 1778 1684 145517.9 0.43 17.6 0.45 17.4 0.46 17.2 0.47 16.9 0.49 16.5 0.50 16.1 0.51 15.6 0.52 15.1 0.52 13.9 0.51






Wall Opening = 15 1/2 x 15 1/2 Mtg. Bolt Circle = 19 3/8Damper Size = 15 x 15 Windband Thickness= 0.051Damper Frame Size = 17 x 17 Motor Cover Thickness = 0.040 Unit Weight**= 84 lbs.


Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

287/8

293/4*

221/8


13/4

287/8

293/4*193/8

22

CUBE

CWB

Size 141 Dimensional Data

16







590 1069 8515.0 0.04 4.5 0.04

690 1250 1076 8055.8 0.06 5.7 0.06 4.7 0.06

790 1431 1285 1094 7486.6 0.08 6.8 0.09 6.1 0.10 5.3 0.09

141-4 1/4 890 1612 1488 1333 11307.7 0.12 7.8 0.13 7.5 0.14 6.9 0.14

990 1793 1684 1552 1396 1184BELT 8.9 0.16 9.1 0.17 8.9 0.18 8.5 0.19 8.2 0.18CUBE 1090 1974 1877 1762 1633 1476

& 10.7 0.22 10.6 0.23 10.5 0.24 10.2 0.25 9.9 0.25CWB 1105 2001 1906 1793 1667 1515 998

10.9 0.23 10.8 0.24 10.6 0.25 10.3 0.26 10.0 0.26 9.6 0.23

141-3 1/3 1210 2192 2106 2006 1896 1773 144312.2 0.30 12.2 0.31 11.7 0.32 11.6 0.33 11.2 0.34 10.9 0.34

141-5 1/2 1390 2518 2445 2362 2271 2174 1949 164314.9 0.45 14.7 0.47 14.2 0.48 13.2 0.50 12.9 0.51 12.1 0.52 11.0 0.51

1495 2708 2640 2565 2483 2396 2202 1967 1617

141-7 3/4 17.2 0.57 16.5 0.58 16.3 0.60 15.6 0.61 13.9 0.62 12.5 0.64 12.2 0.65 10.8 0.61

1595 2889 2826 2757 2683 2602 2430 2225 1968 156820 0.69 19.0 0.70 18.5 0.72 19.5 0.74 16.1 0.75 13.3 0.77 12.3 0.79 12.6 0.78 11.6 0.72

141-10 1 1725 3125 3066 3005 2936 2865 2711 2539 2339 2085 170426 0.87 23 0.89 22 0.90 24 0.92 24 0.94 15.1 0.97 13.4 0.99 14.3 1.00 13.8 0.98 13.8 0.91



895 3316.1 0.06

1010 5286.4 0.09

1125 671 4788.0 0.12 9.3 0.12

141HP-4 1/41240 797 651

10.2 0.16 9.7 0.16

1350 906 790 633BELT 12.9 0.20 12.3 0.20 13.2 0.20CUBE 1465 1016 920 798 642

& 14.2 0.24 13.5 0.26 13.2 0.26 15.5 0.26CWB 141HP-3 1/3 1605 1146 1063 965 846 704

15.2 0.31 14.4 0.33 14.2 0.34 14.0 0.34 15.2 0.34

1725 1256 1178 1098 999 879 74716.1 0.38 15.4 0.40 15.0 0.42 14.9 0.43 14.7 0.43 15.7 0.42

141HP-5 1/21845 1363 1292 1219 1137 1042 924 800

17.0 0.46 16.6 0.48 16.2 0.50 16.0 0.52 15.9 0.52 15.6 0.52 16.1 0.51

1960 1463 1399 1330 1260 1176 1086 970 85418.1 0.54 17.7 0.57 17.4 0.59 17.2 0.61 17.1 0.62 17.0 0.63 16.8 0.6216.9 0.62

2090 1575 1518 1454 1389 1320 1239 1154 1045 936 753141HP-7 3/4 19.5 0.65 19.1 0.68 18.9 0.71 18.7 0.73 18.6 0.75 18.5 0.76 18.4 0.7618.2 0.76 18.0 0.75 22 0.70

2110 1592 1536 1473 1409 1341 1262 1178 1073 965 80419.8 0.67 19.3 0.70 19.1 0.72 19.0 0.75 18.9 0.77 18.8 0.78 18.6 0.7818.5 0.78 18.3 0.77 20 0.73

AVG. DISCHARGE VEL. (FPM) - CFM/1.72 MAXIMUM RPM - 1725MAX. BHP AT A GIVEN RPM - (RPM/1726)3 MAX. MOTOR FRAME SIZE - 145TTIP SPEED = RPM X 3.829




17

®


EXTENDED PRESSURE PERFORMANCE





Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

287/8

293/4*

221/8


13/4

287/8

293/4*193/8

22

CUBE

CWB


18







730 2098 1905 1669 13898.1 0.13 8.0 0.15 7.8 0.15 7.8 0.15

778 2236 2058 1843 1596

161-4 1/4 8.9 0.16 8.7 0.18 8.5 0.19 8.4 0.18

826 2374 2209 2010 1790 1512BELT 9.9 0.20 9.6 0.22 9.3 0.22 9.1 0.22 9.0 0.21CUBE 875 2515 2362 2177 1974 1744 1365

& 11.0 0.23 10.6 0.26 10.1 0.26 9.9 0.26 9.7 0.26 9.7 0.24CWB 161-3 1/3 965 2774 2637 2477 2300 2109 1893 1584

12.4 0.31 12.0 0.34 11.5 0.35 11.2 0.35 10.8 0.35 10.6 0.34 10.5 0.33

161-5 1/2 1110 3191 3072 2941 2796 2641 2475 2297 177015.0 0.47 14.6 0.51 14.2 0.53 13.8 0.53 13.5 0.54 13.1 0.53 12.9 0.53 12.2 0.49

161-7 3/4 1265 3636 3532 3426 3301 3172 3036 2894 2583 216318.5 0.70 18.1 0.74 17.7 0.78 17.2 0.78 16.8 0.79 16.5 0.79 16.3 0.79 15.8 0.78 15.2 0.75

161-10 1 1390 3996 3901 3806 3698 3584 3464 3340 3078 2785 239422 0.93 21 0.97 21 1.02 20 1.03 19.9 1.04 19.6 1.04 19.4 1.05 19.0 1.04 18.6 1.03 18.0 1.00



1550 968

161XP-5 1/2 10.0 0.34

1750 1322 1116 72612.1 0.52 11.4 0.49 10.9 0.43

1880 1515 1359 1139 744

161XP-7 3/4 13.7 0.65 13.1 0.63 12.3 0.60 12.2 0.52BELT 2005 1684 1552 1392 1161 777CUBE 15.0 0.77 14.7 0.78 14.1 0.76 13.4 0.72 13.6 0.63

2205 1946 1834 1713 1578 1395 1127 634161XP-10 1 17.5 1.01 17.3 1.03 17.0 1.04 16.4 1.01 15.9 0.99 15.5 0.92 16.7 0.73

2310 2076 1974 1865 1741 1597 1415 1134 64419.0 1.17 18.7 1.18 18.5 1.20 18.1 1.18 17.5 1.16 17.1 1.12 16.8 1.04 18.4 0.83

161XP-15 1 - 1/2 2420 2212 2118 2015 1908 1785 1637 1451 1179 73120 1.34 20 1.34 20 1.36 19.8 1.38 19.4 1.35 18.9 1.32 18.5 1.28 18.6 1.19 20 0.99

2525 2339 2250 2155 2056 1946 1828 1676 1487 1221 81022 1.52 22 1.52 22 1.54 22 1.56 21 1.56 21 1.53 20 1.50 20 1.45 20 1.35 22 1.16



825 8897.0 0.12

161HP-4 1/41065 1487 1377 1252 1093

11.0 0.25 10.6 0.26 10.2 0.26 9.8 0.26

161HP-3 1/3 1165 1697 1608 1504 1395 1252BELT 12.8 0.32 12.7 0.33 12.2 0.34 11.7 0.34 11.3 0.34CUBE 1255 1882 1799 1715 1617 1519 1218

& 13.1 0.40 12.8 0.41 12.5 0.42 12.0 0.43 11.5 0.43 10.6 0.42CWB 161HP-5 1/2

1340 2053 1975 1897 1816 1724 151314.4 0.48 13.8 0.49 13.3 0.50 12.8 0.51 12.3 0.52 11.3 0.52

161HP-7 3/4 1535 2433 2368 2301 2233 2165 2015 1855 163818.1 0.70 17.7 0.72 17.2 0.73 16.8 0.74 16.4 0.76 15.7 0.78 14.9 0.79 13.5 0.78

1610 2573 2516 2452 2387 2322 2190 2037 1863 1651

161HP-10 1 19.6 0.80 19.2 0.82 18.8 0.83 18.4 0.85 18.1 0.86 17.5 0.89 16.9 0.90 15.8 0.91 14.3 0.90

1690 2722 2671 2611 2550 2488 2365 2228 2082 1899 166421 0.92 21 0.94 21 0.95 20 0.97 20 0.98 19.5 1.01 19.1 1.03 18.6 1.05 16.9 1.05 15.0 1.03






19

®





Wall Opening = 17 1/2 x 17 1/2 Mtg. Bolt Circle = 25Damper Size = 17 x 17 Windband Thickness= 0.051Damper Frame Size = 19 x 19 Motor Cover Thickness = 0.040Unit Weight**= 126 lbs.


Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

353/8

285/8*

273/4


13/4

353/8

285/8*

21

30

CUBE

CWBHIGH PRESSURE PERFORMANCE


20





795 1570

180HP-4 1/4 8.3 0.22

845 17999.5 0.26

180HP-3 1/3 925 2104 168810.8 0.34 9.8 0.35

180HP-5 1/2 1065 2581 2323 193313.8 0.50 12.5 0.52 12.4 0.53

BELT 1140 2823 2604 2294 1886CUBE 180HP-7 3/4 14.4 0.60 13.6 0.64 13.0 0.65 12.8 0.63

& 1215 3063 2868 2626 2286 1854CWB 15.0 0.72 14.5 0.76 14.0 0.78 13.4 0.79 12.9 0.75

1275 3253 3066 2853 2566 220916.7 0.82 15.8 0.87 15.4 0.89 14.9 0.91 14.3 0.89

180HP-10 1 1335 3441 3261 3075 2839 2523 2156

18.7 0.93 17.4 0.98 17.0 1.02 16.6 1.04 16.1 1.04 15.6 1.01

1430 3735 3566 3401 3206 2964 2669 232022 1.13 21 1.19 19.7 1.23 19.3 1.26 18.9 1.27 18.4 1.28 17.9 1.24

180HP-15 1-1/21530 4035 3884 3728 3574 3376 3135 2859 2534

24 1.36 23 1.43 22 1.48 21 1.53 20 1.55 19.8 1.56 19.3 1.57 18.6 1.53

1610 4273 4136 3986 3840 3674 3485 3233 2965 2656

180HP-20 2 25 1.58 24 1.64 23 1.70 23 1.76 22 1.79 21 1.81 21 1.82 20 1.82 19.2 1.78

1685 4495 4369 4226 4085 3945 3768 3575 3325 3061 276627 1.79 26 1.86 25 1.93 26 1.99 24 2.04 23 2.07 22 2.08 21 2.09 21 2.08 20 2.04





630 2380 2154 18617.1 0.13 6.4 0.15 5.5 0.16

180-4 1/4745 2815 2617 2448 1763

9.2 0.22 8.6 0.24 8.1 0.26 7.1 0.25

180-3 1/3 820 3098 2916 2759 225711.2 0.30 10.4 0.32 10.0 0.34 9.0 0.34

880 3325 3152 3002 2576 1893

180-5 1/2 12.7 0.37 12.2 0.39 11.7 0.41 10.8 0.43 9.7 0.39

940 3551 3389 3243 2879 2363BELT 13.8 0.45 13.5 0.47 13.1 0.49 12.4 0.52 11.2 0.50CUBE

180-7 3/41010 3816 3664 3526 3242 2799 2105

& 15.4 0.56 15.2 0.58 14.9 0.61 14.7 0.65 13.7 0.64 11.8 0.58CWB 1075 4061 3919 3786 3554 3141 2652

16.5 0.67 16.2 0.70 15.8 0.73 15.5 0.78 14.7 0.78 13.3 0.75

180-10 1 1185 4477 4348 4224 4005 3703 3336 284118.5 0.90 17.9 0.93 17.1 0.96 16.5 1.01 16.0 1.04 15.2 1.04 14.4 0.99

1275 4817 4697 4578 4369 4163 3799 3437 293021 1.12 20 1.15 19.5 1.19 18.7 1.24 18.2 1.30 17.5 1.30 16.7 1.28 15.9 1.22

180-15 1-1/21360 5138 5026 4913 4710 4532 4232 3912 3537 3023

23 1.36 23 1.39 22 1.43 21 1.49 21 1.56 20 1.58 19.2 1.58 18.3 1.54 17.3 1.46

1430 5402 5296 5189 4993 4819 4593 4270 3968 3567 3001

180-20 2 25 1.58 25 1.62 25 1.66 24 1.72 23 1.79 22 1.83 22 1.83 21 1.83 19.5 1.76 18.2 1.66

1495 5648 5546 5443 5254 5082 4921 4598 4313 3983 356428 1.80 27 1.84 27 1.89 26 1.96 25 2.02 25 2.10 24 2.10 23 2.10 22 2.06 21 1.99



21

®




Wall Opening = 17 1/2 x 17 1/2 Mtg. Bolt Circle = 25Damper Size = 17 x 17 Windband Thickness= 0.051Damper Frame Size = 19 x 19 Motor Cover Thickness = 0.040Unit Weight**= 127 lbs.


Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

353/8

285/8*

273/4


13/4

353/8

285/8*

21

30

CUBE

CWB




22





7402024

200HP-5 1/2 8.1 0.31

8802779 2317

10.5 0.51 9.5 0.52

945 3094 2711 2092

200HP-7 3/4 12.2 0.62 11.5 0.64 10.6 0.62

10103397 3067 2637

14.5 0.75 13.7 0.78 13.2 0.79

200HP-10 1 11103851 3561 3242 2806

BELT 16.9 0.98 16.2 1.02 15.7 1.04 15.5 1.04CUBE

11904207 3944 3661 3321 2850

& 200HP-15 1-1/2 19.0 1.20 18.1 1.24 17.5 1.27 17.3 1.29 17.5 1.26CWB

12704558 4312 4055 3789 3433 2944

22 1.44 21 1.49 20 1.53 19.7 1.56 19.3 1.56 19.8 1.53

13354837 4606 4369 4116 3826 3482 2946

200HP-20 223 1.67 23 1.71 22 1.76 21 1.79 21 1.82 21 1.82 22 1.75

14005110 4898 4674 4436 4195 3880 3515

24 1.91 24 1.96 24 2.01 23 2.05 21 2.09 22 2.09 23 2.08

14655382 5186 4972 4752 4521 4269 3956 3556

200HP-30 3

26 2.18 25 2.23 25 2.28 25 2.33 23 2.37 23 2.40 24 2.40 25 2.37BELT 1535 5674 5494 5290 5085 4867 4646 4379 4080 3668CUBE 27 2.50 27 2.55 27 2.61 27 2.66 25 2.70 23 2.74 24 2.76 26 2.76 28 2.71

16005943 5775 5581 5385 5182 4971 4760 4476 4189 3760

29 2.81 28 2.88 29 2.93 30 2.99 29 3.03 26 3.08 24 3.13 26 3.13 28 3.13 31 3.06



200-4 1/4500

2812 2386 18226.2 0.14 5.4 0.15 4.6 0.15

6053403 3054 2675 2144

8.1 0.25 7.4 0.26 6.7 0.26 6.1 0.25

200-3 1/3 6653740 3422 3096 2699 2073

9.4 0.33 8.8 0.34 8.1 0.35 7.5 0.35 7.0 0.33

7103994 3694 3393 3050 2606

200-5 1/2 10.6 0.40 10.1 0.41 9.3 0.42 8.6 0.42 8.1 0.42

7604275 3994 3718 3413 3048

BELT 12.1 0.49 11.7 0.51 10.9 0.52 10.1 0.52 9.4 0.51CUBE

8204612 4350 4098 3828 3523 2606

& 200-7 3/4 14.1 0.61 14.1 0.63 13.0 0.65 12.2 0.65 11.4 0.65 10.7 0.61CWB

8754922 4676 4439 4192 3922 3240

16.3 0.75 16.3 0.77 15.2 0.78 14.7 0.79 13.5 0.79 12.4 0.78

200-10 1 9605400 5176 4958 4742 4508 3985 3169

18.7 0.98 18.4 1.01 17.7 1.03 17.0 1.04 16.4 1.04 15.0 1.04 14.4 1.00

10305793 5585 5380 5179 4968 4503 3917 2972

21 1.22 21 1.24 20 1.26 19.2 1.28 18.7 1.29 17.5 1.29 16.4 1.27 16.8 1.18200-15 1-1/21100

6187 5992 5798 5610 5421 5006 4529 386123 1.48 23 1.51 23 1.53 22 1.55 21 1.57 20 1.57 19.3 1.57 18.6 1.53

11556496 6311 6125 5946 5767 5383 4948 4410 3629

200-20 2 24 1.72 24 1.74 23 1.77 23 1.79 22 1.81 21 1.81 20 1.81 19.2 1.80 19.9 1.71

12106806 6628 6451 6279 6108 5748 5350 4892 4289 3365

25 1.97 24 2.00 23 2.03 23 2.05 22 2.07 21 2.09 21 2.09 19.8 2.08 19.7 2.04 21 1.88


AVG. DISCHARGE VEL. (FPM) - CFM/2.92 MAXIMUM RPM - 1600 (CUBE)MAX. BHP AT A GIVEN RPM - (RPM/1093)3 MAXIMUM RPM - 1400 (CWB)TIP SPEED = RPM X 5.595 MAX. MOTOR FRAME SIZE - 184T



23

®






Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

4225/32

337/8*

311/4


13/4

423/4

337/8*251/2

34

CUBE

CWB




24





4503585 3155 2624

220-4 1/47.3 0.19 6.6 0.21 6.0 0.22

4753784 3377 2896 2268

7.9 0.23 7.2 0.25 6.5 0.26 6.1 0.25

220-3 1/3 5204142 3771 3357 2845

9.3 0.30 8.4 0.32 7.6 0.34 7.1 0.34

220-5 1/2 6004779 4457 4124 3736 3279

12.0 0.46 11.0 0.48 10.0 0.51 9.3 0.52 8.8 0.52

6455138 4838 4539 4194 3811 3346

BELT220-7 3/4

13.4 0.57 12.6 0.60 11.8 0.63 11.1 0.64 10.4 0.65 9.9 0.64CUBE

6855457 5174 4893 4581 4234 3836 3383

& 14.8 0.68 14.0 0.71 13.4 0.74 12.9 0.76 12.1 0.78 11.6 0.78 11.1 0.77CWB

7205735 5466 5199 4912 4592 4248 3837

220-10 116.0 0.79 15.4 0.82 14.8 0.86 14.4 0.88 13.8 0.90 13.2 0.91 12.7 0.90

7556014 5758 5502 5239 4944 4620 4258

17.3 0.91 16.7 0.94 16.3 0.98 16.0 1.01 15.5 1.03 14.8 1.04 14.3 1.04

8106452 6213 5975 5737 5470 5185 4883 4156

220-15 1-1/218.7 1.13 18.1 1.16 17.7 1.20 17.3 1.24 16.9 1.26 16.2 1.28 15.6 1.29 14.7 1.27

8656890 6667 6443 6220 5987 5729 5453 4835 4111

20 1.37 19.9 1.41 19.3 1.45 18.9 1.49 18.5 1.52 17.8 1.54 17.2 1.56 16.3 1.57 15.9 1.53

9107249 7036 6823 6612 6400 6158 5909 5365 4704

220-20 2 23 1.60 22 1.64 22 1.68 21 1.72 21 1.76 19.9 1.78 19.1 1.81 18.0 1.83 17.1 1.81

9557607 7405 7202 7000 6799 6580 6347 5844 5261 4602

25 1.85 25 1.89 24 1.93 24 1.97 23 2.02 23 2.05 22 2.07 20 2.11 19.0 2.11 18.6 2.07



6502909 1940

220HP-5 1/2 8.6 0.45 7.5 0.42

6803151 2405

9.6 0.51 8.6 0.51

7353582 3006

220HP-7 3/4 11.7 0.63 10.8 0.65

7803902 3427 2716

13.2 0.74 12.2 0.78 11.9 0.77

220HP-10 1 8604459 4075 3578 2863

BELT 14.8 0.96 14.1 1.02 13.7 1.05 12.9 1.01CUBE

9204860 4529 4121 3593 2756

& 16.6 1.16 15.6 1.23 15.4 1.27 14.9 1.28 13.6 1.20CWB

220HP-15 1-1/2985

5281 4988 4642 4220 3674 282518.8 1.39 17.6 1.48 17.2 1.54 16.9 1.57 16.2 1.56 14.6 1.46

10355602 5335 5033 4659 4209 3630

21 1.60 19.5 1.69 18.6 1.77 18.5 1.81 18.1 1.82 17.0 1.79220HP-20 21085

5920 5678 5390 5061 4679 4210 357323 1.82 21 1.92 20 2.00 20 2.06 19.8 2.10 19.3 2.09 17.8 2.03

11356236 6006 5743 5456 5114 4708 4215 3518

BELT 24 2.06 23 2.17 22 2.26 21 2.34 21 2.39 21 2.40 20 2.38 19.4 2.28CUBE

220HP-30 3 11906582 6363 6125 5863 5556 5221 4811 4309 3598

25 2.35 24 2.47 24 2.57 23 2.66 23 2.72 22 2.77 22 2.77 22 2.73 22 2.61

12406895 6684 6469 6217 5950 5637 5283 4885 4374 3633

26 2.64 25 2.76 25 2.88 25 2.97 25 3.05 24 3.10 23 3.13 24 3.13 25 3.08 27 2.92





25

®







Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

4225/32

337/8*

311/4


13/4

423/4

337/8*251/2

34

CUBE

CWB




26





1100 1292 789

240XP-5 1/2 10.9 0.40 11.9 0.34

1195 1613 1321 79211.6 0.53 12.1 0.51 13.4 0.43

240XP-7 3/4 1365 2079 1886 164513.6 0.77 13.4 0.78 13.7 0.77

BELT 240XP-10 1 1500 2424 2256 2079 1630CUBE 15.9 1.00 15.3 1.03 15.1 1.04 15.5 1.01

240XP-15 1 - 1/2 1720 2939 2815 2671 2366 1975 133621 1.48 19.8 1.51 19.2 1.53 18.4 1.57 18.4 1.53 20 1.35

240XP-20 2 1895 3333 3222 3109 2847 2566 2202 170624 1.94 23 1.98 22 2.01 21 2.07 21 2.10 21 2.05 22 1.92

2030 3632 3529 3423 3197 2945 2667 2319 1852

240XP-30 3 26 2.37 25 2.40 25 2.44 24 2.51 23 2.56 23 2.58 23 2.51 25 2.38

2165 3927 3830 3733 3535 3305 3063 2787 2461 2048 132429 2.85 28 2.89 28 2.93 27 3.01 26 3.07 25 3.12 25 3.11 25 3.05 27 2.93 31 2.47



4103717 3170 2471

240-4 1/4 6.4 0.16 5.8 0.18 5.3 0.18

4654216 3768 3188 2162

7.6 0.23 7.0 0.25 6.3 0.26 5.9 0.23

240-3 1/3 5104623 4243 3717 3134

BELT 8.9 0.31 8.1 0.33 7.3 0.34 6.9 0.34CUBE

240-5 1/2 5855303 4961 4540 4093 3565

& 11.5 0.46 10.5 0.49 9.5 0.51 8.8 0.52 8.4 0.51CWB

240-7 3/4 6706074 5763 5461 5052 4659 4202 3524

14.3 0.69 13.4 0.74 12.8 0.76 12.2 0.78 11.5 0.79 11.0 0.78 10.6 0.73

240-10 1 7356663 6370 6133 5764 5409 5037 4618

16.6 0.92 15.9 0.97 15.5 0.99 15.1 1.01 14.6 1.03 13.9 1.04 13.4 1.03

240-15 1-1/2 8457660 7400 7184 6947 6615 6304 6002 5282

19.6 1.39 19.0 1.46 18.6 1.49 18.2 1.51 17.6 1.54 17.0 1.56 16.4 1.57 15.4 1.56

240-20 2 9308431 8194 7985 7798 7536 7233 6953 6375 5706 4324

24 1.86 23 1.93 23 1.98 22 2.00 22 2.03 21 2.06 19.9 2.08 18.7 2.10 17.8 2.07 17.9 1.83



6353046 2673

240HP-5 1/28.1 0.43 7.4 0.43

6753405 3070 2607

9.4 0.51 8.8 0.52 8.4 0.51BELT

240HP-7 3/4 7754233 3979 3704 2940

CUBE 13.1 0.75 12.5 0.77 12.1 0.78 11.8 0.77&

240HP-10 1 8504812 4599 4367 3846 3025

CWB 14.5 0.96 14.0 0.99 13.8 1.01 13.4 1.04 12.6 1.00

240HP-15 1-1/2 9755737 5567 5387 4988 4539 4006

18.4 1.39 17.9 1.43 17.3 1.48 16.9 1.53 16.6 1.56 15.9 1.56

240HP-20 2 10706404 6272 6112 5775 5407 4990 4550 3625

22 1.80 22 1.84 21 1.89 19.7 1.98 19.7 2.04 19.4 2.07 18.8 2.08 16.6 1.95

11506960 6836 6711 6406 6077 5735 5335 4925 4212

BELT 240HP-30 3 24 2.21 24 2.26 23 2.30 22 2.40 22 2.48 22 2.55 21 2.57 21 2.58 20 2.49CUBE

12307513 7395 7280 7016 6730 6410 6090 5709 5326 4722

26 2.68 25 2.73 25 2.77 25 2.88 25 2.98 24 3.05 24 3.13 23 3.14 23 3.16 25 3.09


AVG. DISCHARGE VEL. (FPM) - CFM/3.76 MAXIMUM RPM - 1230 (CUBE)MAX. BHP AT A GIVEN RPM - (RPM/837)3 MAXIMUM RPM - 1070 (CWB) TIP SPEED = RPM X 6.413 MAX. MOTOR FRAME SIZE - 184T




27

®







Mo

untin

g H

ole

Bo

lt C

ircle

Wal

l Op

enin

g

50

36*

383/8


13/4

50

36*29

40

CUBE

CWB




28





790 1776

300XP-7 3/4 9.4 0.48

900 2958 227312.2 0.79 11.3 0.75

300XP-10 1 990 3619 3167 2538BELT 14.6 1.04 13.4 1.05 12.8 1.00CUBE 300XP-15 1 - 1/2 1130 4511 4201 3833 2773

18.9 1.48 17.8 1.53 16.8 1.56 15.6 1.46

300XP-20 2 1245 5182 4930 4648 3943 270522 1.92 21 1.99 20 2.04 18.6 2.08 17.9 1.86

300XP-30 3 1425 6199 5983 5768 5286 4695 388627 2.78 26 2.86 25 2.95 24 3.07 22 3.14 21 3.03

1560 6941 6746 6549 6143 5684 5134 4441 3049

300XP-50 5 31 3.57 30 3.67 30 3.76 28 3.93 27 4.05 25 4.12 24 4.02 24 3.50

1690 7643 7464 7284 6920 6528 6091 5587 4951 4100 307036 4.47 35 4.57 34 4.68 33 4.87 31 5.04 30 5.16 29 5.24 28 5.14 28 4.88 28 4.32



4603125

300HP-5 1/2 7.3 0.44

4853639

7.9 0.52

300HP-7 3/4 5554788 3651

BELT 10.4 0.77 9.9 0.76CUBE

300HP-10 1 6105549 4731

& 12.4 1.00 11.3 1.03CWB

300HP-15 1-1/2 7006741 6149 5390

16.0 1.47 15.2 1.53 14.0 1.57

300HP-20 2 7707613 7107 6535 5814 4684

18.6 1.91 18.1 2.00 17.4 2.06 16.2 2.09 16.0 1.99

300HP-30 3 8859014 8603 8150 7678 7062 6353

23 2.83 23 2.94 23 3.03 22 3.12 21 3.15 21 3.14BELT

300HP-50 5 104510909 10570 10222 9855 9455 9054 8533 8002 7330 6463

CUBE 35 4.54 34 4.68 34 4.82 33 4.94 32 5.04 31 5.13 31 5.17 30 5.21 28 5.15 27 4.99

AVG. DISCHARGE VEL. (FPM) - CFM/5.50 MAXIMUM RPM - 905 (CUBE)MAX. BHP AT A GIVEN RPM - (RPM/522)3 MAXIMUM RPM - 765 (CWB) TIP SPEED = RPM X 7.983 MAX. MOTOR FRAME SIZE - 213T





300-3 1/3355 5777 5132 4227

6.9 0.27 6.3 0.30 5.3 0.31

365 5939 5316 44637.2 0.29 6.5 0.33 5.7 0.34

300-5 1/2 420 6835 6314 56609.0 0.45 8.2 0.49 7.5 0.52

300-7 3/4 480 7811 7377 6844 5440BELT 11.0 0.67 10.5 0.72 9.9 0.76 8.5 0.77CUBE 300-10 1 530 8625 8231 7772 6636

& 13.3 0.90 12.7 0.95 12.2 1.00 11.2 1.05CWB 300-15 1-1/2 605 9845 9501 9127 8226 7084

17.0 1.34 16.4 1.40 15.7 1.46 14.8 1.54 13.5 1.55

300-20 2 665 10822 10508 10193 9411 8495 727120 1.77 19.7 1.85 18.6 1.92 17.5 2.02 16.7 2.07 15.1 2.04

300-30 3 765 12449 12176 11904 11273 10554 9743 8756 735224 2.70 24 2.78 23 2.86 22 3.00 21 3.09 20 3.15 18.7 3.14 17.0 2.98

BELT 300-50 5 905 14727 14497 14266 13788 13223 12614 11963 11191 10357 9178CUBE 32 4.47 32 4.57 32 4.67 29 4.85 28 5.00 28 5.11 27 5.19 26 5.21 24 5.20 22 5.01



29

®





Damper Size = 36 x 36 Roof Opening = 38 1/2 x 38 1/2Windband Thickness= 0.080 Motor Cover Thickness = 0.064Curb Cap Metal Thickness = 0.080 Unit Weight**= 440 lbs.


13/4

585/8

391/8*

293/8

46

CUBE




30


ROOF UPBLAST



3008092 7206 6023

6.9 0.37 5.9 0.42 5.4 0.43360-5 1/2

3208631 7820 6755 5256

7.7 0.44 6.8 0.50 6.0 0.52 6.6 0.51

360-7 3/4 3659845 9142 8299 7286 5767

10.2 0.66 9.4 0.72 8.5 0.77 8.0 0.78 8.3 0.74BELT

360-10 1 40010789 10153 9426 8556 7575

CUBE 12.7 0.87 11.9 0.94 11.1 0.99 10.3 1.02 9.9 1.02

360-15 1-1/2 46012408 11862 11281 10587 9814 7809

16.8 1.32 16.5 1.40 15.8 1.48 15.1 1.53 14.5 1.55 13.5 1.52

360-20 2 50513621 13125 12602 12022 11359 9878

20 1.74 20 1.83 19.8 1.92 19.0 1.99 18.6 2.04 17.9 2.06

360-30 3 58015644 15212 14769 14306 13783 12597 11287 9381

23 2.64 23 2.74 23 2.84 22 2.94 22 3.02 21 3.10 20 3.13 18.4 3.02

360-50 5 69018611 18248 17884 17504 17115 16236 15243 14187 12985 11290

30 4.44 29 4.57 28 4.69 28 4.81 28 4.93 27 5.11 25 5.21 24 5.26 23 5.25 22 5.09



4206407

360HP-10 19.6 0.90

4407003

10.8 1.03

360HP-15 1-1/2 5058765 7539

15.3 1.52 14.3 1.57

360HP-20 2 55510029 9046 7766

BELT 17.2 1.97 16.2 2.06 15.4 2.08CUBE

360HP-30 3 63511934 11157 10276 9171 7329

21 2.87 19.5 3.00 18.2 3.09 17.8 3.12 17.3 2.95

69513321 12662 11902 11053 10026 8393

360HP-50 524 3.70 23 3.86 22 3.98 20 4.07 20 4.09 19.6 3.92

75514688 14086 13434 12734 11922 10973 9593

28 4.68 27 4.86 26 5.01 25 5.14 24 5.23 23 5.24 22 5.10

360HP-75 7.5 86517129 16631 16105 15544 14933 14315 13565 12738 11789 10197

33 6.89 32 7.11 30 7.32 29 7.50 29 7.64 29 7.79 28 7.87 27 7.89 25 7.83 23 7.50



700 3210

360XP-10 1 10.5 0.81

760 4020 322511.1 1.05 11.1 1.01

360XP-15 1 - 1/2 870 5243 4740 411213.6 1.53 12.7 1.57 12.3 1.55

360XP-20 2 955 6081 5679 5216 394915.4 1.97 15.4 2.04 14.2 2.08 13.0 1.98

BELT 360XP-30 3 1095 7351 7050 6724 5930 4905CUBE 19.2 2.85 18.4 2.95 17.8 3.03 16.4 3.13 15.4 3.07

360XP-50 5 1300 9113 8881 8635 8125 7502 6764 5867 428626 4.54 25 4.69 24 4.82 23 5.04 22 5.21 21 5.24 20 5.15 20 4.52

1395 9910 9693 9477 9009 8490 7905 7193 6348 5143

360XP-75 7 - 1/2 29 5.50 28 5.67 27 5.83 26 6.08 25 6.30 24 6.48 23 6.48 23 6.37 23 5.87

1490 10699 10496 10294 9871 9429 8907 8340 7673 6881 583033 6.61 32 6.78 31 6.96 30 7.27 29 7.52 27 7.73 26 7.89 26 7.90 26 7.78 27 7.34






31

®



13/4

653/8

443/4*

351/4

52

CUBE

13/4

743/16

481/8*

36

58

CUBE










32


ROOF UPBLAST



220 9353 7846 5075

420-5 1/2 6.5 0.31 6.0 0.37 5.5 0.35

245 10416 9104 73047.2 0.43 6.7 0.50 6.1 0.53

420-7 3/4 280 11904 10785 9418 74198.3 0.64 7.7 0.73 7.1 0.78 6.6 0.77

420-10 1 305 12966 11959 10781 92729.4 0.82 8.8 0.94 8.0 1.00 7.3 1.02

420-15 1 - 1/2 350 14879 14037 13050 11925 10562Belt 11.9 1.24 11.2 1.38 10.1 1.46 9.4 1.52 8.6 1.54

CUBE 420-20 2 385 16367 15629 14731 13791 12701 924614.4 1.65 13.5 1.81 12.4 1.91 11.7 1.99 10.7 2.05 8.5 1.92

415 17643 16982 16148 15303 14363 12028

420-30 3 17.2 2.07 16.1 2.24 14.9 2.37 13.8 2.45 13.0 2.53 10.9 2.56

440 18706 18103 17316 16532 15691 13652 1015117.7 2.47 17.1 2.65 16.0 2.81 14.7 2.89 14.6 2.98 12.8 3.07 10.6 2.82

420-50 5485 20619 20076 19394 18681 17960 16313 14277

20 3.31 19.7 3.51 19.1 3.69 17.5 3.81 17.2 3.91 16.2 4.07 14.9 4.09

525 22319 21817 21220 20560 19904 18497 16795 1480223 4.19 22 4.41 22 4.61 21 4.78 20 4.88 19.1 5.10 18.1 5.20 17.6 5.16

420-75 7 - 1/2565 24020 23553 23030 22417 21806 20544 19112 17437 15398

26 5.23 25 5.46 25 5.68 25 5.88 24 6.02 23 6.25 21 6.43 21 6.50 21 6.38

600 25508 25069 24604 24027 23451 22295 21023 19561 17884 1547929 6.26 29 6.51 29 6.75 28 6.96 28 7.15 27 7.38 25 7.63 24 7.75 24 7.77 26 7.47



180 11016 8924

480-5 1/2 5.5 0.33 4.9 0.39

200 12240 10490 76886.3 0.45 5.8 0.53 5.3 0.52

480-7 3/4 225 13770 12261 101327.5 0.65 7.0 0.73 6.6 0.76

480-10 1 250 15300 13988 12248 99889.0 0.88 8.5 0.98 8.2 1.04 7.9 1.03

480-15 1 - 1/2 285 17442 16332 14991 13240 1115411.1 1.31 10.6 1.43 10.0 1.52 9.6 1.55 9.2 1.52

Belt 480-20 2 315 19278 18274 17116 15719 14033 11996CUBE 12.9 1.77 12.5 1.90 11.8 2.01 11.3 2.08 10.4 2.09 10.2 2.03

335 20502 19558 18507 17320 15785 14074 11811

480-30 3 14.6 2.13 14.2 2.26 13.6 2.39 13.0 2.49 12.3 2.51 11.2 2.49 11.3 2.38

360 22032 21153 20222 19142 17848 16410 1474916.8 2.64 16.5 2.79 16.1 2.93 15.3 3.05 14.7 3.10 13.7 3.12 12.7 3.08

395 24174 23373 22572 21605 20621 19343 18035 14722

480-50 5 21 3.49 20 3.65 20 3.81 19.2 3.94 18.5 4.07 17.6 4.11 16.6 4.13 14.9 3.97

425 26010 25266 24521 23679 22764 21766 20556 1792222 4.35 21 4.52 21 4.69 20 4.85 19.4 4.98 18.7 5.09 17.7 5.12 15.6 5.09

460 28152 27464 26776 26064 25219 24373 23399 21163 18582

480-75 7 - 1/2 25 5.51 24 5.70 24 5.89 23 6.07 22 6.22 22 6.37 21 6.46 18.5 6.52 18.7 6.42

490 29988 29342 28697 28051 27291 26497 25704 23674 21437 1884628 6.66 27 6.86 27 7.06 26 7.26 25 7.43 25 7.59 24 7.75 22 7.85 20 7.84 24 7.67



ROOF UPBLAST



33

®

34

Typical Specifications

Spun aluminum exhaust fans shall be centrifugal beltdriven type. The fan wheel shall be centrifugalbackward inclined, constructed of aluminum and shallinclude a wheel cone carefully matched to the inletcone for precise running tolerances. Wheels shall bestatically and dynamically balanced. The fan housingshall be constructed of heavy gauge aluminum with arigid internal support structure. The windband shall bewelded to the one-piece curb cap and on all sizes withUL/CUL-762.

Motors shall be heavy duty ball bearing type, carefullymatched to the fan load, and furnished at thespecified voltage, phase and enclosure. Drive frameassembly shall be constructed of heavy gauge steel.Motors and drives shall be mounted on vibrationisolators, out of the airstream where no steel to steelcontact between rotating components and the baseshall occur. Fresh air for motor cooling shall be drawninto the motor compartment through a ten square inchtube free of discharge contaminants. Motors anddrives shall be readily accessible for maintenance.

Precision ground and polished fan shafts shall bemounted in permanently sealed, lubricated pillowblock ball bearings. Bearings shall be selected for aminimum (L10) life in excess of 100,000 hours atmaximum cataloged operating speed. Drives shall besized for a minimum of 150% of driven horsepower.Pulleys shall be of the cast type, keyed and securelyattached to the wheel and motor shafts.

Motor pulleys shall be adjustable for final systembalancing. A disconnect switch shall be factoryinstalled and wired from the fan motor to a junction

box installed within the motor compartment. A conduitchase shall be provided through the base to the motorcompartment for ease of electrical wiring.

All fans shall bear the AMCA Certified Ratings Seal forsound and air performance.

Each fan shall bear a permanently affixedmanufacturer's engraved metal nameplate containingthe model number and individual serial number forfuture identification.

Specifier select one of the following mountingconfigurations:

Roof Mounted Upblast Exhaust Fans -

A leakproof fan housing shall be constructed with a one piece windband with an integral rolled bead for added strength and shall be joined to the curbcap with a continuously welded seam.

Fans shall be Model CUBE, CUBE-HP, or CUBE-XP as manufactured by Greenheck.

Sidewall Mounted Exhaust Fans -

A leakproof fan housing shall be constructed with a one piece windband with an integral rolled bead for added strength. Fan shall be provided with a mounting plate, which is attached and sealed to the wall prior to locating the entire unit.

Fans shall be Model CWB, or CWB-HP as manufactured by Greenheck.

Belt Drive Specifications

35

Typical Specifications

Spun aluminum exhaust fans shall be upblast centrifugaldirect drive type. The fan wheel shall be centrifugalbackward inclined, constructed of aluminum and shallinclude a wheel cone carefully matched to the inlet conefor precise running tolerances. Wheels shall be staticallyand dynamically balanced. The fan housing shall beconstructed of heavy gauge aluminum with a rigid internalsupport structure.

Motors shall be mounted out of the airstream on vibrationisolators. Fresh air for motor cooling shall be drawn intothe motor compartment free of discharge contaminants.Motors shall be readily accessible for maintenance.

A disconnect switch shall be factory installed and wiredfrom the fan motor to a junction box within the motorcompartment. A conduit chase shall be provided throughthe curb cap to the motor compartment for ease ofelectrical wiring.

All fans shall bear the AMCA Certified Ratings Seal forsound and air performance.

Each fan shall bear a permanently affixed manufacturer’sengraved metal nameplate containing the model numberand individual serial number for future identification.

Specifier select one of the following mountingconfigurations:

Roof Mounted Upblast Exhaust Fans

A leakproof fan housing shall be constructed with a one piece windband with an integral rolled bead for added strength.

Fans shall be Model CUE as manufactured by Greenheck.

Sidewall Mounted Exhaust Fans

A leakproof fan housing shall be constructed with a one piece windband with an integral rolled bead for added strength. Fan shall be provided with a mounting plate, which is attached and sealed to the wall prior to locating the entire unit.

Fans shall be Model CW as manufactured by Greenheck.

Direct Drive Specifications

UL/cUL Listed

Fans shall be Listed by UnderwritersLaboratory for UL/cUL 705 Listed for allelectrical components.

Fans shall be Listed by UnderwritersLaboratory for UL/cUL 762 Listed for allelectrical components and grease removal

Curb Extensions

Shall be mounted between roof curb and roofmounted fans to meet NFPA requirements of40 in. minimum discharge above the roof whenmounted on a minimum 8 in. high roof curb.

Grease Containers

Drain connection shall be constructed ofaluminum and allow for a single point drainageof grease, water or other residues.

Grease Trap shall include the drain connectionand shall be constructed from aluminum. Theunit shall collect grease and water from the fanand extract the grease from the water for easeof grease disposal

Easy Clean Options

Hinge kit shall be constructed of heavy gaugealuminum hinges and shall include hold opencables for field installation.

Non Stick wheel shall be constructed ofaluminum with a non stick coating simular toTeflon® as manufactured by Dupont.

Clean out port shall have a hole on the outsideof the windband and a grease repellentcompression rubber fit, allowing access toentire wheel for cleaning.

Windband Extension shall be constructed fromheavy gauge aluminum tube that raises thedischarge an additional 36 inches.

Options and AccessoriesFor Belt and Direct Drives

Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to our factory, transportation prepaid. Motors arewarranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheckprove defective during this period, they should be returned to the nearest authorized motor service station. Greenheck will not be responsible for any removal or installation costs.As a result of our commitment to continuous improvement, Greenheck reserves the right to changespecifications without notice.

P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.comCopyright © 2005 Greenheck Fan Corp.

Catalog Series C Rev. 5 January 2005 SP

Greenheck delivers value to

mechanical engineers by

helping them solve virtually any

air quality challenges their

clients face with a

comprehensive selection of top

quality, innovative air-related

equipment. We offer extra value

to contractors by providing

easy-to-install, competitively

priced, reliable products that

arrive on time. And building

owners and occupants value

the energy efficiency, low

maintenance and quiet

dependable operation they

experience long after the

construction project ends.

Building Value in Air

Our Warranty

Model TCB inline belt driven fans are the ideal choice for installations with straight-through air flowin ducted systems. The wheels used are designed to provide higher efficiencies and lower soundlevels. The fan itself can be mounted horizontally or vertically. Performance capacities range from306 cfm to 24,000 cfm and up to 4.5 in. wg of static pressure.

Model USGF is ideal for heavy grease exhaust applications as found in char broilers, solid fuel cooking, andoriental cooking. Sizes range from 140 to 200HP. All are UL Listed for electrical and grease applications andare capable of exhausting 400 degrees F continuously. The unit is constructed entirely of steel and includesthe non-stick coated steel wheel, Nema-3R disconnect, hinged curb cap, and clean outport. Performanceranges up to 3 in.wg and up to 7,000 cfm.

Series C Models CUE, CUBE, CW, and CWB are commonly used for general clean air, mild grease, andfume hood exhaust applications. Both Roof Upblast and Sidewall configurations are specificallydesigned to discharge air directly away from the mounting surface. These models are constructed ofaluminum and use an aluminum backward inclined wheel. They are UL Listed for electrical or grease.Performance capacities ranges up to 5 in. wg and up to 30,000 cfm.

Model SWB centrifugal backward inclined belt driven utility fans are designed for supply, exhaust and returnair applications requiring higher discharge velocities and high static pressures. The SWB Series 100 is forgeneral clean air applicators. The SWB Series 200 fans are constructed with heavy gauge steel. Designedfor light industrial duty and grease applications it’s capacities ranging from 500 cfm to 30,000 cfm and upto 5 in. wg of static pressure. SWB fans can be mounted indoors or outdoors.

Additional Exhaust Solutions

SeriesCCatalog Cwb Fan

Documents

Transcript of SeriesCCatalog Cwb Fan