Series WMR - Cold Point Corp · 2017-11-20 · Series WMR Singer / McQuay WM-B Series Application...
Transcript of Series WMR - Cold Point Corp · 2017-11-20 · Series WMR Singer / McQuay WM-B Series Application...
A D I R O N D A C K A I R E
Series WMRSinger / McQuay WM-B SeriesApplication Flexible Fast and Easy Replacement Damage Protection
ADIRONDACK-AIRE WMR CHASSIS SERIES
Adirondack-Aire WMR series zerOzone console units provide environment friendly, high efficiency, cooling and heating where individual, quiet control is a priority. This application flexible unit is a direct replacement for Singer/McQuay WMB series console water source heat pump units. The WMR series is also an ideal choice for renovation or new construction console water source heat pump projects. These console units are offered as chassis only to work with the existing or custom room cabinets or with a new cabinet for a complete installation. The chassis contains the compressor, air side heat exchanger, water side heat exchanger, evaporator fan and motor, control components and safety components. The optional room cabinet is powder painted furniture-grade steel construction with extruded aluminum grille and control door. The WMR series has two chassis sizes, small (models 08, 10, and 12), and large (models 15 and 18).
All chassis sizes are dimensionally identical to the original for a fast, easy, and trouble-free installation. Quality components, careful design and testing, and the latest in environment friendly technology advances mean long unit life, user satisfaction, and lower energy costs. Consider the extensive list of standard features, which includes: powder painted drain pan, refrigerant circuit access ports, electrostatic air filter, evaporator freeze protection, water coil freezestat, high-pressure over protection, anti-short cycle protection and electronic control board. Adirondack-Aire is the replacement solution that the competition can’t match. Cold Point Corp. backs the WMR with a customer friendly one-year parts and labor warranty and five-year compressor warranty, (see Warranty document for details). A full range of options are available, including low temperature option, boilerless control, hose kits, control options, etc.
Replaces Singer / McQuay WM-B
• Made in the USA
• Designed for easy installation and compatibility. Dimensionally identical to the original Singer/McQuay chassis
• ETL approved
• Quiet, durable, and efficient compressor with built-in pressure and temperature protection
• Heavy gauge G90 galvanized steel construction
• Powder-painted drain pan
• High efficiency copper tube-aluminum fin evaporator coil
• High efficiency coaxial condenser coil with low water-side pressure drop
• Unit-mounted digital controls
• Electronic control board with anti-short cycle protection
• High pressure switch
• Frost-free cooling
• Water coil freeze protection
• Refrigerant circuit access ports
• Capillary expansion
• Positive shift reversing valve
• Precision charged with zerOzone R-410A refrigerant
• 1/2 Inch water connections
• Electrostatic air filter
Standard Features:
Electrical Data*
ModelCompressor
Type Voltage
Volt-Hz-Ph
Fan CompressorTotal Amps
Ckt Amps
Max Fuse
Min VoltsAmps HP RLA LRA
WMR-08 Rotary 115/60/1 1.2 1/10 6.1 39.1 7.3 9.0 15 104
WMR-08 Rotary 208-230/60/1 0.4 1/10 3.0 15.0 3.4 5.0 15 197
WMR-08 Rotary 265/60/1 0.4 1/10 2.7 11.0 3.1 4.0 15 240
WMR-10 Rotary 115/60/1 1.2 1/10 8.0 50.0 9.2 11.5 15 104
WMR-10 Rotary 208-230/60/1 0.4 1/10 4.4 20.0 4.8 6.0 15 197
WMR-10 Rotary 265/60/1 0.4 1/10 3.4 21.0 3.75 5.0 15 240
WMR-12 Rotary 115/60/1 1.2 1/10 9.5 50.0 10.7 14.0 20 104
WMR-12 Rotary 208-230/60/1 0.4 1/10 4.7 25.0 5.1 7.0 15 197
WMR-12 Rotary 265/60/1 0.4 1/10 4.2 22.0 4.6 6.0 15 240
WMR-15 Rotary 208-230/60/1 0.6 1/10 5.6 29.0 6.2 8.0 15 197
WMR-15 Rotary 265/60/1 0.6 1/10 5.0 28.0 5.6 7.0 15 240
WMR-18 Rotary 208-230/60/1 0.6 1/10 7.4 33.0 8.0 10.0 15 197
WMR-18 Rotary 265/60/1 0.6 1/10 6.0 28.0 6.6 9.0 15 240
* If optional electric heat is selected see Electric Heat Ratings Table: Total Amps, Ampacity and Fuse is the larger Value.
Electrical Heat Ratings* (Boilerless)Heater
No. Volt Watts Btuh HTR Amps
Total HTR
Amps
Min Ckt
Amps
Max Fuse
1
208 1,000 3,400 4.8 5.4 7 15
230 1,220 4,160 5.3 5.9 7 15
277 1,000 3,400 3.6 4.2 5 15
2
208 2,000 6,820 9.6 10.2 13 15
230 2,450 8,350 10.7 11.3 14 15
277 2,000 6,820 7.3 7.9 10 15
*Optional
Fast and Easy ReplacementThe Adirondack-Aire WMR series zerOzone replacement chassis fits the existing Singer/McQuay room cabinets without modification. Because the WMR dimensions and construction details are like the original, replacement work is fast and easy. The chassis is field adaptable to either LH or RH piping applications, offering maximum flexibility and spare chassis interchangeability. Water, drain and electrical connections line right up to the original installation. Using Adirondack-Aire replacements eliminates the need for room renovation, redecorating, or piping and wiring changes. The WMR is
the solution that gets your property back in service quickly and at the lowest total cost. Choose the optional room cabinet to give the unit a new look and improve room aesthetics, or the low temperature option for earth coupled or ground water applications.
Damage ProtectionThe standard high-pressure switch, evaporator coil freeze protection, and electronic control board stop unit operation before damage occurs, should airflow become reduced or obstructed due to dirty filters, obstructed airflow, or motor failure. A freezestat protects the water coil from freeze damage due to water temperature
or flow problems. The water coil is designed for low water-side pressure drop, eliminating potential pump sizing and water flow problems.
Options and Accessories• Room cabinet (LH and RH available)• Flow control valve• Electric or hydronic heat• Control options• Valves and unions• Line cords• Boilerless• Hose kits• Customer-specified custom features• Low temp option
WMR CHASSIS APPLICATION & BENEFITS
Unit Sizes
ModelA B C D E F G H Chassis
Weight (lbs)Inches
WMR-08 44 9/16 10 3/4 8 7/8 37 3/4 6 1/4 2 5/8 10 1/4 23 5/16 116
WMR-10 44 9/16 10 3/4 8 7/8 37 3/4 6 1/4 2 5/8 10 1/4 23 5/16 118
WMR-12 44 9/16 10 3/4 8 7/8 37 3/4 6 1/4 2 5/8 10 1/4 23 5/16 120
WMR-15 54 9/16 12 9/16 10 7/8 42 3/4 10 3/4 3 1/2 12 1/8 24 145
WMR-18 54 9/16 12 9/16 10 7/8 42 3/4 10 3/4 3 1/2 12 1/8 24 155
Chassis Cabinet
Performance RatingsModel
Cool Btuh
Sens Btuh
EERHeat Btuh
COPCFM Hi/Lo
GPM Coil PD Refrigerant
WMR-08 7,800 6,000 14.0 9,200 4.4 300/250 2.0 1.2' R-410A
WMR-10 10,600 8,000 13.6 12,100 4.6 395/330 2.5 1.8' R-410A
WMR-12 11,500 9,400 12.4 14,000 4.3 400/350 3.0 2.5' R-410A
WMR-15 14,700 10,700 13.8 16,100 4.3 475/400 3.8 4.6' R-410A
WMR-18 17,800 13,700 13.1 21,000 4.4 540/420 4.5 3.3' R-410A
Continuous engineering improvements may result in performance changes without notice.
NEMA ConfigurationsNon Locking Plugs/Receptacles
Voltage 125V 250V 277V
15A Recp.
15A Plug
20A Recp.
20A Plug
30A Recp.
30A Plug
277V Line cord N/A as factory installed
rev. 11-17 CPL019
7500 Cold Point Dr • Rome, New York 13440Phone (315) 339-2331 • Fax (315) 339-2358www.ColdPointCorp.com©2017 Cold Point Corp. All rights reserved.
Cold Point equipment has been specified in hundreds of projects in these and other applications:Direct Replacement | New Construction | Renovation | Commercial & Residential Solutions
INNOVATIVE HEATING AND COOLING SOLUTIONS
Your Cold Point Representative:
Cold Point values reliability as much as youYour Cold Point sales representative knows their reputation is on the line with every sale. Therefore, they are as
personally invested in your comfort as you are, and take great pride in creating your perfect indoor environment.
Rest comfortably, knowing Cold Point stands behind our productsThe Cold Point Corporation backs our products with a standard warranty that includes labor for the entire first year
of ownership. Registered Limited Warranty terms include: 12 month limited warranty on components, 60 month limited warranty on all unit compressors from the date of original installation OR 15 months limited warranty on components, 63 month limited warranty on all unit compressors from the date of original sale, whichever comes first. For all coverage options and complete coverage terms, check with your local Cold Point representative for full details.
Industry-leading expertiseCold Point Corporation is the industry-leading supplier of aftermarket comfort solutions for commercial and residential
applications. We have over 18 years of experience developing OEM-style replacement products to keep you happy and comfortable. Whether it is a water source heat pump application or an air source PTAC system, Cold Point has the knowledge and products to restore your system to its original operating condition.
Reliable comfort products backed by the industry experts in OEM-style replacement unitsTo learn more about how the Cold Point Corporation can help you save time and money on your next project,
contact your local Cold Point representative. Call 315-339-2331 to speak with one of our specialists, or e-mail your request to [email protected].