Series Telescopic Crane - Work Truck West
Transcript of Series Telescopic Crane - Work Truck West
12000 Series Telescopic Crane
12000 Series Telescopic Crane
Let our telescopic cranes take on the heavy lifting. The IMT 12000 Series telescopic crane has a maximum lifting capacity of 12,000 lb (5443.1 kg) and a horizontal boom reach of 30' 1" (9.2 m) — the longest in the industry. Featuring the Penta BoomTM design, this crane is built for strength and control, and when combined with an IMT Dominator® mechanics truck, creates the ultimate service and maintenance truck.
Penta Boom DesignDifferent material thickness to address structural requirements, while controlling the weight of the crane.
Standard Features
• 30' 1" (9.2 m) of boom reach• Fully proportional “pistol grip” radio remote control• Flip sheave boom tip• Boom angle -10° to +80° (-0.2 to 1.4 rad)• Increased capacity• Patented hook stow• Patented anti-two-block device• Radio remote control receiver
Options
• 25' (7.6 m)• Boom tip lights
Body Sizes
• Dominator III• Dominator IV
In addition to these specifications, heavy-duty electrical and cooling systems are required. It is recommended that the vehicle be equipped with an engine tachometer, auxiliary brake lock, and power steering.
Minimum Chassis Specifications
Chassis Style Conventional Cab
Front Axle Rating (GAWR) 9000 lb (4082.3 kg)
Rear Axle Rating (GAWR) 17,000 lb (7711 kg)
Wheelbase 154" (391 cm)
Cab-to-Axle 84" (213 cm)
Resistance to Bending Moment Minimum 1,700,000 in-lb (19,586 kg-m)
Frame Section Modulus 14.2 cu in (232.7 cm3)
Gross Vehicle Weight Rating 26,000 lb (11,794 kg)
Radio Remote ControlOur pistol grip handle is ergonomic while increasing comfort and decreasing hand fatigue and is available with joystick or toggle switch controls.
Radio Remote Control ReceiverTo simplify troubleshooting and increase productivity, our radio remote control receiver provides an LED readout detailing error codes. It also uses programmable logic for precise control of individual functions.
Flip SheaveOur unique flip sheave allows operators to work in tighter areas by reducing the boom tip profile height by 8" (20.3 cm).
Radio Receiver
Hook Stow Cable Guide
Anti-two-block Device
18"(45.7 cm)
21" (53 cm)
21"(53 cm)
18" (45.7 cm)
46.3"(117.6 cm)
10.2"(25.8 cm)
49.3" (125.2 cm)
2'-0"(60 cm)
156.7" (398 cm)
51.8" (131.4 cm)34.9" (88.6 cm)
6.5"(16.5 cm)
DIMENSIONAL DRAWING - 12000-14000 SHORT
11.5" (29.2 cm)
Center of Gravity
11'-6"(3.5 m)
18'-0"(5.5 m)
24'-0"(7.3 m)
75°
60°
45°
30°
15°
0°
120005445
120005445
120005445
86003900
53202415
43701980
37051680
33251510
29451335
99754525
70703205
59852715
52252370
48002175
43701980
69453150
74603835
83153770
93604245
120005445 11400
5170
80°
lb
kglb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
13'-0"(4.0 m)
21'-6"(6.6 m)
30'-1"(9.2 m)
75°
60°
45°
30°
15°
0°
89104040
120005445
120005445
64102905
39501790
32001450
28001270
25101140
2200998
94804300
63202865
48802215
42801950
38601750
34101545
59002675
66203005
73503335
80803665
112005080 9480
4300
80°
lb
kg
lb
kglb
kg
lb
kg
lb
kg
lb
kg
lb
kglb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kglb
kg
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position. • Maximum one-part line weight is 7000 lb (3175 kg)
• The weight of load-handling devices is part of the load lifted and must be deducted from the rated capacity
• Maximum one-part line weight is 7000 lb (3175 kg)• The weight of load-handling devices is part of the load lifted and must
be deducted from the rated capacity
*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.
25' Load Chart
30' Load Chart
12000 Series Specifications 25' Boom Crane Rating* 79,000 ft-lb (11.1 tm)
Max. Capacity 12,000 lb (5443.1 kg)
Max. Horizontal Reach (with flip sheave up) 24' 10" (7.6 m) Max. Horizontal Reach (with flip sheave down) 24' (7.3 m) Max. Capacity @ Max. Reach 2945 lb (1335 kg) Fully Retracted 11' 5" (3.5 m) Hydraulic Extensions 75" x 2 (190.5 cm x 2) Lifting Height (with flip sheave down) 26' 3" (8 m) Crane Weight 3050 lb (1383.5 kg) Crane Storage Height 46.3" (117.6 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
46.2" (117.3 cm)21.4" (54.3 cm)
Required Mounting Space for Crane Base 24" x 25" (61 x 63.5 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 11.5" x 18" (29.2 x 45.7 cm) Rotational Torque 11,000 ft-lb (1.5 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
12000 Series Specifications 30' Boom Crane Rating* 77,000 ft-lb (10.7 tm)
Max. Capacity 12,000 lb (5443.1 kg)
Max. Horizontal Reach (with flip sheave up) 30' 11" (9.4 m) Max. Horizontal Reach (with flip sheave down) 30' 1" (9.2 m) Max. Capacity @ Max. Reach 2200 lb (998 kg) Fully Retracted 13' 2" (4 m) Hydraulic Extensions 102" x 2 (259 cm x 2) Lifting Height (with flip sheave down) 32' 3" (9.8 m) Crane Weight 3235 lb (1467.4 kg) Crane Storage Height 46.3" (117.6 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base
56.3" (143 cm)22.8" (58 cm)
Required Mounting Space for Crane Base 24" x 25" (61 x 63.5 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 11.5" x 18" (29.2 x 45.7 cm) Rotational Torque 11,000 ft-lb (1.5 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec
18"(45.7 cm)
21" (53 cm)
21"(53 cm)
18" (45.7 cm)
46.3"(117.6 cm)
10.2"(25.8 cm)
49.3" (125.2 cm)
2'-0"(60 cm)
156.7" (398 cm)
51.8" (131.4 cm)34.9" (88.6 cm)
6.5"(16.5 cm)
DIMENSIONAL DRAWING - 12000-14000 SHORT
11.5" (29.2 cm)
Center of Gravity
18"(45.7 cm)
21" (53 cm)
21"(53 cm)
18" (45.7 cm)
46.3"(117.6 cm)
10.2"(25.8 cm)
49.3" (125.2 cm)
2'-0"(60 cm)
156.7" (398 cm)
51.8" (131.4 cm)34.9" (88.6 cm)
6.5"(16.5 cm)
DIMENSIONAL DRAWING - 12000-14000 SHORT
11.5" (29.2 cm)
Center of Gravity
31.8"(80.7 cm)
46.3"(117.6 cm)
10.2"(25.8 cm)
54.7" (138.9 cm)
22"(55.8 cm)
176.2" (447.5 cm)
52" (132.2 m)47.8" (121.3 m)
DIMENSIONAL DRAWING - 12000-14000 LONG
18"(45.7 cm)
21" (53 cm)
11.5" (29.2 cm)
21"(53 cm)
18" (45.7 cm)
6.5"(16.5 cm)
Center of Gravity
46.3"(117.6 cm)
10.2"(25.8 cm)
54.7" (138.9 cm)
22"(55.8 cm)
176.2" (447.5 cm)
52" (132.2 m)47.8" (121.3 m)
DIMENSIONAL DRAWING - 12000-14000 LONG
18"(45.7 cm)
21" (53 cm)
11.5" (29.2 cm)
21"(53 cm)
18" (45.7 cm)
6.5"(16.5 cm)
Center of Gravity
46.3"(117.6 cm)
10.2"(25.8 cm)
54.7" (138.9 cm)
22"(55.8 cm)
176.2" (447.5 cm)
52" (132.2 m)47.8" (121.3 m)
DIMENSIONAL DRAWING - 12000-14000 LONG
18"(45.7 cm)
21" (53 cm)
11.5" (29.2 cm)
21"(53 cm)
18" (45.7 cm)
6.5"(16.5 cm)
Center of Gravity
31.8"(80.7 cm)
Nothing Says Commitment Like The Diamond.™ IMT has been meeting the needs of our customers for over 50 years, and none of it would have been possible without a distributor network that’s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you’re looking for reliable equipment and dependable service, remember IMT.
IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, IMT logo, Dominator, Penta Boom and NOTHING SAYS COMMITMENT LIKE THE DIAMOND are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA.© 2015 Iowa Mold Tooling Co., Inc. All Rights Reserved.
06/15
Iowa Mold Tooling Co., Inc.500 Highway 18 West Garner, Iowa 50438800-247-5958 • www.imt.com
Planetary Winch• Capacity of 7700 lb (3493 kg) powered by
high-torque hydraulic motor• Single line operating speed of 60 fpm (18.2 m/min)
under no-load conditions• Maximum two-part line capacity of 12,000 lb (5443 kg)• Equipped with 100' (30.5 m) of 1/2" (1.27 cm) of
6 x 36 FW PRF RRL IWRC XIPS wire rope• Anti-two-block prevents the snatch block assembly
from coming in contact with boom tip• Speed of winch is 60 fpm (0.3 m/sec)• Meets ANSI B30.5 standards
Hydraulic System• Open-centered, full pressure system• System requires 12 gpm (45.4 L/min) optimum oil
flow at 2900 psi (200 bar)• Fully proportional control valve with “pistol grip” radio
remote control system• Includes radio elimination cable, hydraulic oil reservoir,
and suction and return line filters
Power Source• Power provided by integral-mounted hydraulic
pump and PTO• Min. requirement is 24 hp (17.9 kW) based on
12 gpm at 2900 psi (45.4 L/min at 200 bar)• Other standard power sources can be utilized
Cylinder Holding Valves• All cylinders equipped with integral-mounted
counterbalance valves• Prevent sudden cylinder collapse in case of
component failure
Rotation System• Consists of a worm gear and turntable gear bearing• Powered by a high-torque hydraulic motor • Standard rotation is 450° (7.85 rad)• Speed rotation is 30 seconds
Excessive Load Limit System (ELLS)• Pressure transducer used to sense overload• When overloaded, the following functions are
stopped: boom down, extension out, and winch up