SEO Link Robot Guide v2.0

SEO Link Robot User Guide V2.1

By Stephen Hawkins Published 2011-2012

Copyright Stephen Hawkins – http://www.seolinkrobot.com 2

DISCLAIMER AND TERMS OF USE AGREEMENT

The author and publisher of this Manual and the accompanying software materials have used their best efforts in preparing this guide. The author and publisher make no representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the contents of this Manual and the accompanying software materials. The information contained in this Manual and the accompanying software materials is strictly for educational purposes. Therefore, if you wish to apply ideas contained in this Manual and the accompanying software materials, you are taking full responsibility for your actions. Every effort has been made to accurately represent this product and it's potential. Even though this industry is one of the few where one can write their own check in terms of earnings, there is no guarantee that you will earn any money using the techniques and ideas in these materials. Examples in these materials are not to be interpreted as a promise or guarantee of earnings. Earning potential is entirely dependent on the person using our product, ideas and techniques. We do not purport this as a “get rich scheme.” Any claims made of actual earnings or examples of actual results can be verified upon request. Your level of success in attaining the results claimed in our materials depends on the time you devote to the program, ideas and techniques mentioned your finances, knowledge and various skills. Since these factors differ according to individuals, we cannot guarantee your success or income level. Nor are we responsible for any of your actions. Materials in our product and our website may contain information that includes or is based upon forward-looking statements within the meaning of the securities litigation reform act of 1995. Forward-looking statements give our expectations or forecasts of future events. You can identify these statements by the fact that they do not relate strictly to historical or current facts. They use words such as “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “believe,” and other words and terms of similar meaning in connection with a description of potential earnings or financial performance. Any and all forward looking statements here or on any of our sales material are intended to express our opinion of earnings potential. Many factors will be important in determining your actual results and no guarantees are made that you will achieve results similar to ours or anybody else’s, in fact no guarantees are made that you will achieve any results from our ideas and techniques in our material. The author and publisher disclaim any warranties (express or implied), merchantability, or fitness for any particular purpose. The author and publisher shall in no event be held liable to any party for any direct, indirect, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of this material, which is provided “as is”, and without warranties. As always, the advice of a competent legal, tax, accounting or other professional should be sought. The author and publisher do not warrant the performance, effectiveness or applicability of any sites listed or linked to in this Manual and the accompanying software materials. All links are for information purposes only and are not warranted for content, accuracy or any other implied or explicit purpose.

This Software and Manual are © copyrighted by Stephen Hawkins. No part of this may be copied, or changed in any format, sold, or used in any way other than what is outlined within this manual under any circumstances.


Software Installation

Running the setup file

The ‘seo link robot’ file you downloaded will be a single ‘exe’ file which is the

main setup for the software.

Note: Take note of the folder you have downloaded this file to.

OPEN the folder and run the file ‘SEOLinkRobot_Setup.exe’ and this will install

the software on your computer and create all of the icons you need to run the

software.

TAKE CARE TO FOLLOW THIS IMPORTANT STEP:

Now you must run the file as admin. Select the click the

SEOLinkRobot_Setup.exe’ file and right click the mouse then choose ‘run as

administrator’ as shown

Once ran the software will now install and setup all of the permissions as needed.

The installation file name may vary depending on the version of the software you

have purchased.

Note that if you are using ‘windows XP’ the ‘run as administrator’ step is not

required. You Must however ‘run as administrator’ for the software to be setup correctly on ‘Windows Vista’ and ‘Windows 7’

If you’re running internet explorer 9 you need the following plugins installed:

- Java

- Flash

- shockwaves


Registering Your License Before you use the software you must register the license you received when you purchased Seo Link Robot. You do this by entering the following information: Full name: Your PayPal full name PPEmail: Your PayPal email address you paid with Serial number / Hardware Key: These are sent on via email after purchase Note: that all of the fields must match your signup information.

Note that you need to add data to all fields and you ‘MUST’ add the ‘full name’, and PayPal/plimus email used as per your purchase for the software to be validated correctly. Click ‘Login’ to verify/register your login details or simply cancel to exit the screen. If you enter invalid data the screen will exit. Note that each license is locked to a pc. If the license if required to be swapped between machines then you need to contact us direct to have the machine id reset. You can also set the ‘auto unlock’ tick box within the ‘settings’ module to auto unlock the software license on shutdown.


Main Menu Options Pro Version The menu screen is the main dashboard for the ‘Seo Link Robot’ software and contains all the options available within the software.

The following options are available:

- Campaign Manager o Create and edit all of your campaigns. Create / edit accounts and information for social

bookmarking / rss / web 2.0 / article directory and press releases.

- Proxy Manager o Add / delete / test and edit all of the proxies to be used within the software

- Web 2.0 Poster

o Create your web 2.0 accounts (if required) o Scrape articles to be used within your postings (if required) o Auto add spintax to articles o Auto post to your selected web 2.0 sites using spinnable articles o Generate random link structure + link wheels / pyramids using link tags


- Article Poster

o Create your article directory accounts (if required) o Auto post to your selected sites using spinnable articles (if required) o Scrape articles to be used within your postings o Auto add spintax to articles o Auto Retrieve links

- Web 2.0 Linker

o Create your web 2.0 accounts (if required) o Auto post to your selected web 2.0 sites using spinnable articles (if required) o All posted web 2.0 site urls are interlinked within a network structure o Scrape articles to be used within your postings o Auto add spintax to articles

- Blog Network Poster

o Add your own Wordpress sites and accounts o Auto post to your selected sites using spinnable articles (if required) o Scrape articles to be used within your postings o Auto add spintax to articles o Auto Retrieve links

- Press Release Poster

o Create your article directory accounts (if required) o Auto post to your selected sites using spinnable articles o Auto add spintax to press released

- Bookmarking

o Submit to social booking sites. Spin anchor and descriptions

- RSS o Submit to RSS directories. Spin anchor.

- Article Spinner

o Basic article spinner. Use standard spinning syntax and n-level spinning. o Scrape articles to be used within your postings o Auto add spintax to articles

- Site Pinger

o RPC Ping all you urls

- Email verifier o Auto verify / confirm your emails

- System Settings

o View / modify the current system settings / unlock license o Decaptcha services o Auto spinners

- Link Viewer

o View the current profile links o Add new links o Delete links o Export links


Main Menu Options Lite Version The menu screen is the main dashboard for the ‘Seo Link Robot Lite’ software and contains all the options available within the software.

The following options are available:

- Campaign Manager o Create and edit all of your campaigns. Create / edit accounts and information for social

bookmarking / rss / web 2.0 / article directory and press releases.

- Proxy Manager o Add / delete / test and edit all of the proxies to be used within the software

- Web 2.0 Poster

o Create your web 2.0 accounts (if required) o Scrape articles to be used within your postings (if required) o Auto add spintax to articles o Auto post to your selected web 2.0 sites using spinnable articles o Generate random link structure + link wheels / pyramids using link tags

- Article Poster

o Create your article directory accounts (if required) o Auto post to your selected sites using spinnable articles (if required) o Scrape articles to be used within your postings o Auto add spintax to articles o Auto Retrieve links


- Bookmarking

o Submit to social booking sites. Spin anchor and descriptions

- RSS o Submit to RSS directories. Spin anchor.

- Article Spinner

o Basic article spinner. Use standard spinning syntax and n-level spinning. o Scrape articles to be used within your postings o Auto add spintax to articles

- Blog Network Poster

o Add your own Wordpress sites and accounts o Auto post to your selected sites using spinnable articles (if required) o Scrape articles to be used within your postings o Auto add spintax to articles o Auto Retrieve links

- Site Pinger

o RPC Ping all you urls

- Email verifier o Auto verify / confirm your emails

- System Settings

o View / modify the current system settings / unlock license o Decaptcha services o Auto spinners

- Link Viewer

o View the current profile links o Add new links o Delete links o Export links


Campaign Manager: The ‘Campaign Manager’ is the main data hub for the software. This screen allows you to create / edit and delete all of your campaigns within seo link robot. The site, email, user information for all of the accounts is added in within this area. NOTE: you cannot access other modules in the software until you have created at least ‘One’ campaign. Campaign Creator: On start-up you will have 2 options if you have no campaign currently available

The import wizard will be detailed in a later section of the guide. We will cover the creation of a new campaign from beginning to end, so in this instance we click the ‘Yes’ button and we get the following input area to add the name of our first campaign:

We add the campaign name then press create and the skeleton campaign is created and the following screen displayed.


Each Campaign will contain all of the data required for each module (i.e. Web 2.0 / article directory) and all of this data is entered within this screen. The data can also be modified within each of the module screen if required. At this point we can auto generate data or manually add in all data. Let us choose the ‘auto gen data’ and choose a male profile. This will add male data and also auto scrape the company data in the process.


The data is auto created and company details scraped. Note you can modify the user names used in the software by editing the ‘names’ text files found in the application folder.


Note that data can be re-scraped using the ‘Scrape Details’ button. A spinnable username is added by default.

The following buttons are used to add / delete and save all of your campaigns

Note that all campaign details are ‘auto saved’ when you change campaign or close the campaign manager screen. You must fill in ‘all’ details within the campaign before you create your web 2.0, article, press release, social bookmarking and rss accounts. Example campaign data


NOTE: You can auto add spintax to your description field by simple right clicking the mouse when over the description area and select ‘Identify and insert synms’. You do need to have setup either ‘the best spinner’ Or ‘Spinner Chief’ usernames and passwords before this function can be used. The ‘Generic’ category will be chosen by default and added to your categories when saved, so please ensure you pick a related category from the dropdown list. Creating web 2.0, article, press release, social and rss accounts This option is only available within the ‘Pro version’ of the software. To create account we need to

- Choose specific sites to create accounts on - Create account on all sites - Create specific account types i.e. Web 2.0 - Create all account types

To start account creation we use the ‘Account Creator’ button on the menu bar and choose the option we want to run

Use the ‘Create All’ option beside each account type to create new accounts on all sites.


If you select the ‘create selected’ option you must select the sites within the sections (web 2.0 / press release / article / rss or social bookmarking) as shown:

Accounts will only be created on the selected (tick next to them) sites. All non-selected sites will not have accounts created. You need to repeat this process for the rss, social bookmark, article directories and press releases accounts. Signups for for Seo Link Robot Lite The lite version of seo link robot doesn’t have automated signups therefore the quickest way to do signups is to first export all account data to create an empty account file. Next we need to get a list of the sites we need to signup to. We do this using the ‘Account Signups’ button. Note that this button is only shown in the lite version of the software.

Click the ‘account signups’ button and a browser window will open and display all of the sites in the software broken down by site type. Simply click each site in turn and signup then add the data to the ‘exported account data file’. Once all sites have been signed up to, import the data account filer back into the software THEN do the email verification process to pick up any passwords that have been mailed out.


Importing existing account via text file You can import existing accounts into the social, rss, web 2.0, article directory and press release areas using a text file. To get the base format data file you first click on the ‘import data ‘Export account data to text file’ option as shown.

Select a file name to export to and save. The data will be exported and you can open the file in ‘notepad’ and it will be in the following format: Web 2.0 Accounts ============ blog.com,, insanejournal,, myopera,, onsugar,, wordpress,, zimbio,, Gather,, blog.ca,, bravejournal,, Simply add the ‘username’ and password between the commas as follows Web 2.0 Accounts ============ blog.com,steve6, gooey25 insanejournal,, myopera,, onsugar,, wordpress, steve6, gooey25 zimbio,bobriley, yanp98 Gather,, blog.ca,, bravejournal,, note that the comma needs to be present between the username and password. Each line should not contain any extra commas, you only have 2 commas per line. Don’t edit the file in excel as tis saves additional characters that may not be recognised on import. Save the data in notepad then use the import option to import the accounts back into the software.


Email Verification The email verification option in the menu allows you to both test and verify your email for the current chosen campaign.

The Test email settings option allows you to test the email data setup within your campaign. You should always test the email settings before creating any accounts

The Verify email icon will open the email verifier screen and allow you to auto verify your emails for the accounts you have just created. If you wish to verify other emails that are not created in the software you can modify the ‘emails.txt’ file within the application folder and add in additional unique signatures.


Click the ‘start verification process’ to start the verifying of emails. Additional email info: Note that within the email section you will need to select if your email provider uses the ‘SSL’ (secure socket layer) protocol to connect to your email server.

It is recommended not to use a free ‘yahoo’ email account here as the free

accounts do not allow pop3 access to your emails. One of your own domain

emails is preferred; if you wish to use a free email then ‘live.com’ is the preferred free email provider.

If you enter one of your domain email accounts then your pop3 server will

normally contain your domain name as follows:

If you domain is ‘mysite123.com’ your email server will be one of the following

formats

mail.mysite123.com

pop.mysite123.com

pop3.mysite123.com

If your site uses ‘secure socket layers’ (SSL) the standard port will be ‘995’ if not the standard port is ‘110’

Note: don’t use a free yahoo email account. A free yahoo account functions as

though it connects fine but ‘yahoo’ does not send any of the email in the mailbox

via pop3, so they always show as ‘no messages’. I.e. Live.com Pop3 server = pop3.live.com

Port: 995 SSL : Enabled You can also use your own email server address and details. Most domains have the ability to host pop 3 email. The most common formats for a user domain are as follows: Mail.mydomain.com or Pop.mydomain.com or pop3.mydomain.com Note that ‘mydomain.com’ is the name of your own domain. More info on Gmail can be found here: http://mail.google.com/support/bin/answer.py?hl=en&answer=13287

http://mail.google.com/support/bin/answer.py?hl=en&answer=13287


Import Wizard The import wizard allow users to migrate data from version 1 of seo link robot to version 2.0+ Click the ‘import wizard button to open the import wizard screen. Note that the import wizard will attempt to associate a web 2.0 / article and press release project from version 1.0 with a campaign name or imported campaign name (profile in version 1).. If this cannot be matched then a bulk update won’t import the data from that specific file.

The following import wizard will be opened

You must first import your profiles if none exist for your projects before you can import data accounts and site details. To import your default profiles, simply click the ‘find xprofiles.lxs’ button and the software will open in your mydocs folder by default. If your xprofiles.lxs file has been moved to a different location then select the file manually. Once selected click the ‘import file data’ button and the following screen will be shown


You select the profiles to import and click the ‘Import / update selected data’ and the data will be imported and saved as separate campaigns. You can also double click the profile name and the base profile data will be shown

Note that the version 1 site data details i.e. Urls / url list etc are held within the project files themselves and not within the profile. These can be imported in the next section together with the accounts themselves. Once you have imported the profiles the profile import screen will exit and you will see the imported profiles within the main campaign screen.


Click the ‘import wizard again and go to the ’Import account data from file or folder’ tab

Note that the social and rss accounts file are not related to any profile in version 1.0 and therefore must be loaded separately and assigned to a campaign.


Bulk loading web 2.0 / article and press release file data To bulk load we need to 1) Choose a folder containing the project files 2) Select the ‘import file from folder’ option 3) select the article directory accounts, web 2.0 accounts and press release accounts. 4) optional – select the ‘include site’ data to populate the campaign with the site info from the imported project file (urls / descriptions / url list etc)

Click the ‘import account data’ and the accounts + the site data will be imported in. To Import from a specific file (has option has to be used for rss and social bookmarking imports) choose only the ‘import single file and 1 import file type then choose your campaign (from the dropdown list) to import the data into.

Click the ‘import account data’ button to import the accounts into the campaign.


Importing ‘ONLY’ the site information data What is the site only data? The site only data is all the data that belongs to a version 1 project file. This includes the urls, url list, keywords, descriptions etc. To import the site only data from a web 2.0 / article or press release project (version 1) you

1) select a single file 2) Select the import single file option 3) Select the include site data tick box 4) Select the campaign to import the site data into

Click the ‘Import site data’ button to import only the site information and the data will be imported.


Example of an import The following is an example when you want to import a specific web 2.0 profile and also include the ‘web 2.0’ project data that has been added to the web 2.0 project within version 1 of the software. Choose the following options

We need to set the following as can be seen in the screenshot above:

- Choose the file using ‘find file’ to it is set in the ‘single file path’ - Click the ‘import data into specific campaign (if you are setting a specific campaign

data) - Select the ‘import single file’ option so we are importing from a single file - Select the ‘import file type’ web 2.0 accounts - Select the ‘include site data’ tick box. This is the option that import the additional site

data i.e. url, keywords etc So at this point we are importing ‘BOTH’ the web 2.0 accounts (username and passwords) plus the related site data we created within that web 2.0 project. Now click the ‘Import Account Data’ button to import all the account and site data. If you wish to only import the site related project data then click the ‘Import Site Data’ button only.


Project Settings Area

The main seo link robot project settings are used to set global settings within the software that are used throughout the other campaign modules.

The settings screen is found at the top left corner of the main menu screen as shown

Within the settings screen you have several options: - Set the browser state normal or minimized from view - Default thread count to use when posting to the various sites - Auto unlocking option of the license on the current running - The Best Spinner and Spinner Chief usernames and passwords - Auto spintax options - Captcha solving accounts passwords decaptcher / death by captcha / image typerz

In this screen you select the spinner API type to be used for auto spintax processing and you must also select the spin quality and number of synms to return from the TBS or SC api. The protected keywords option allows you to protect your keywords when the data is modified and if this option is chosen your keywords will not be spun.

You can set your ‘default threads’ to the used when you post to the web 2.0 / article dir / social and rss modules. If you get a lot of failure you need to reduce these threads.


If you do not want to have the browser windows showing when doing the posts then select the ‘minimized’ browser state option. You can also set the software to auto unlock license on shutdown feature by clicking the auto unlock check box.

The ‘auto unlock license’ option allows you to auto unlock the software after use. If you’re using more than one machine this is required to be set. To manually unlock a license you need to click the ‘unlock license’ button on the toolbar.

To use auto solving captcha services you need to have the captcha account details added in for the services you want to use in the software processes.


Always test the service account when you add them to ensure they are working 100%.

You need to also select the service to use as the ‘robot decaptcher mode’

There are a set of new proxy and Internet Cache cleaner option that can also be set. Currently a lot of users will run utilities such as ccleaner before they do a run; this is fine and users can continue to do this but a new option called ‘Auto clear IE Cache’ will delete all of the internet explorer cache files before each run. If the option is set then the IE cache will be cleared down before every single post. The ‘Auto clear proxies’ will auto unset any proxy ip and port that was setup within internet explorer when the software is shut down. Do not set the ‘auto clear proxies’ option if you require a proxy server to be setup for general use. Also you do not need to set this option if you are running a VPN service like HMA Pro. The ‘Auto proxy test’ option will test the current proxy server before you post to any sites. If the proxy server fails then the proxy manager screen will be shown and you can select a new working proxy. Note when you exit this screen any settings changed will auto save. If you don’t currently own a best spinner license then you can use the following discount code to get this for $47 instead of the current $77 purchase price. http://www.seolinkrobot.com/tbs

http://www.seolinkrobot.com/tbs


Adding Wordpress article directories to the software From Version 205 there is a new settings area where users can add their own ‘word press article directories’ (these are not word press blogs but use an article directory plugin).

To load the existing user file click the ‘Open User File’ button, note this will load a blank file if no user sites have been added into the software. Add the base site into the software including the http as follows: http://www.articlesite.com http://www.articlesite1.com http://www.articlesite2.com

Click the ‘save WP List’ button to save the new sites. You can also delete or modify any invalid / non-working sites and click the ‘save WP List’ button to update the list.

http://www.articlesite.com/

http://www.articlesite1.com/

http://www.articlesite2.com/


Article Spinner

The article spinner is accessed via the main menu and can be used to create simple spun article from scratch or to auto retrieve articles via the inbuilt article scraper.

The article spinner uses the standard syntax for spinning as follows

{ } for spinnable content | To separate the spinnable content

Example:

If we spin Today is Monday as shown

When you click out of the ‘spinning options’ area you will see the main area updated as shown:

We can further sub spin Sunday as follows:

To spin any content simply highlight the word or phrase in the main window then click within the spinning options window to add the spun content. Add a new keyword or phrase per line


Click the ‘Spin Article’ button to see examples of your spun article.

Note that you ‘NEED’ to save your article for use within the web 2.0 site postings. Click the ‘save raw spin data’ button to save to file. The article spinner also has the option to auto create inline links within the article text. This links will appear as clickable words (hyperlink) within the article itself. We have 2 options here:

- Automatically create a link to the previously posted site - Insert a random link from your posting url list

Automatically linking the previous site We use the [%LASTLINK%] tag to connect our sites together on auto pilot creating an open link wheel style structure as follows.

An example of this is shown


We can also introduce the [%RANDOMLINK%] tag to add links to our custom url list that we have added within the web 2.0 poster module. This will rotate through our links and add additional urls to our article text. Note that we can also select our spun article text to add our special tags as shown

Within our web 2.0 article posting section we can also add the random link and last link tags via the spinnable article screen. You can also add plain html links within your article text if required.


Auto add spin syntax to an article You can auto add your spin syntax to an article by using the toolbar button ‘Auto Ident Synms’ and this will query the ‘the best spinner’ api using your username and password and pass in your article (max 5000 characters) and auto add spin syntax to it. Note that you need a best spinner or spinner chief account to be able to use this function (see last section)

If you don’t have a ‘the best spinner’ or ‘spinner chief’ account setup you will get a ‘username invalid’ or ‘invalid user details’ error message. Article Scraper + spinning The inbuilt article scraper can be used to find articles based on a keyword or number of keywords. The keywords can be added into the article scraper but by default any keywords within a keyword list or the protected keyword area in the article spinner will be auto added

Click the ‘find article button’ to open the article scraper. Note the auto filled keywords


The article scraper comes in a number of parts

1) Add keywords 2) Select directories to scrape 3) Select the number of article to scrape for each keyword 4) Find articles 5) Select the articles to download 6) Download articles then export back to the calling screen i.e. Article Spinner / web 2.0 /

article poster etc

To add a new keyword simply ‘double click’ the keyword list, add the keyword in the box and click add.

Select sites to scrape from and click the ‘find articles’ button and the articles will be pulled back into the ‘download progress list’


Click the ‘article list results’ tab and choose the articles to download.

With the selected articles ready for download simply click the ‘download selected articles’ so they can be viewed.in the download articles tab.

You now double click the article in the results list and it will be displayed.

With the selected articles ready for download simply click the ‘download selected articles’ so they can be viewed in order for you to verify the contents is what you want.


You may need to remove any erroneous characters in this section that have been embedded into the article. This is more of a quality check that needs to be done to ensure the article is what you want to use. Click ‘add/save’ if changes have been made but if not choose ‘dismiss article’ Now select the article you want to export and click the ‘export selected links’ button and the top most articles in the list will be exported back to the module. If the article scraper is run from the ‘web 2.0 linker’ then the entire selection of articles will be exported back.

The article is now exported back into the article spinner in this instance as we opened the article scraper from the simple article creator module.


Note the [TITLE] tag that has been added to the article. This tag is used to identify the title and used when the article is saved and loaded direct into one of the other modules. All we do now is to auto add spintax for the article. Click the auto ident synms to do this.

This will send the article direct to spintax api and return the results as shown

You can test spin the article using the ‘spin preview’ button.


Web 2.0 Site Creator: The web 2.0 creator screen allows you to scrape and post articles to independent web 2.0 sites and to create interlinking link networks using special article tags. This screen comes in four parts as follows: Main Site data You need to have a set of campaign data which is used for signing up and posting to your web 2.0 sites. This data is automatically taken from the campaign that is currently loaded. The software will keep track of the last campaign loaded into seo link robot and that campaign will be auto loaded through the software modules.

To change a campaign you click the campaign name list and select a new item. The selected campaign will be loaded and any data set in the previous campaign will be saved.


Take note of the ‘anchor text’ and description fields in the example above. They are fully spinnable and use the standard spinning syntax as shown within the article spinner section earlier in this guide.


The toolbar contains several items as follows

- Add web 2.0 urls o This button add web 2.0 post links to your url list. This is useful when creating

link pyramids and cross link pyramids as well other network linking structures.

- Verify Emails o Use this option to open the email verifier to verify any accounts with a status of

not verified

- Find article o This option allows the scraping of articles from a set of article directories. This

option is covered within the article spinner section earlier in this guide.

- Link Viewer o The link viewer contains the entire set of links created for this campaign.

- Export Log

o This option allows you to export the log data to file

- Start Posting o This option post the web 2.0 campaign article to the selected web 2.0 sites

Creating Your Web 2.0 accounts (optional): You can optionally create web 2.0 accounts within this module. This account creation is the same process as carried out in the campaign manager screen. If an account for a site has been removed or deleted; that account can easily be recreate in this module. Switch to the ‘Web 2.0 Account’ data screen to start the process and select the account to be re-created

Now click the ‘create account button to run the creation process. NOTE: If you manually add site info then you need to click on a different row in the grid and click the ‘Save Data’ button for the data to be saved.


Adding your Spinnable Article to post to your web 2.0 sites: You need to add your spinnable article to post to your web 2.0 sites along with your links (if required). If you use a ‘random link’ tag the url list will be used to replace the tag in real-time. To do this click the ‘Spinnable Article’ tab on the web 2.0 screen Note that you can also set the ‘use footer’ option within the post screen to add a random url against a random keyword from your keyword list.

Note You right click the article area and select the ‘identify and insert synms title / body’ to add spintax to the article itself. Choose the description option to add spintax to the ‘main site data’ description field. You can load an article in 3 ways

1) Scrape the article then auto add spintax 2) Load the article from file (i.e. From the article spinner save process or via another

article spinner) 3) Paste the article from the clipboard

You will ‘NOT’ see any of the links added to the article within the ‘spin article’ preview text if you are adding footer style links to the article. These footer url links are added to the articles dynamically when the articles are posted to the web 2.0 sites.


You can insert special tags from the ‘right click’ menu option. Select the text you want to add a special tag and right click the mouse to show the options.

Please refer to the basic article section for more information on the ‘last link’ and ‘random link’ tags. Both ‘last link’ and random link’ tags are replaced in real-time before the articles are posted. You can also add additional links using the option ‘Insert URL’ which is found at the bottom of the popup menu options. You first choose a url from the url dropdown list and this url is inserted as a clickable anchor text link within the article text. Select a url

Select the text to anchor and select the ‘Insert URL’ option:

The selected text is anchored and the relevant html added to the article


Find out more on creating article networks in this video: http://www.youtube.com/watch?v=pNlIbImcNX4 Note you can also auto add spin syntax using the ‘right click menu’ items

- Identify and Insert Synms – Title Text - Identify and Insert Synms – Body Text

To preview an example of the spun article you simply click the ‘spin article’ button. Note that you will see the article auto spun as html text in the preview area. This is normal and the format we want the article to appear in before we can post to our web 2.0 site.

http://www.youtube.com/watch?v=pNlIbImcNX4


You can preview how your article will look on the web 2.0 site using the ‘Browser preview’ option button. This will create a temp html file and show it within your default browser.

Google Penguin Updates Change: Due to the google penguin updates we need to extend the keyword list we use and post variations of our anchor text to our chosen pages. To do this a new article tag has been introduced this tag looks like this: [%RANDOMKEYWORD%] And can be either manually added or added using the ‘right click’ menu system as above. Simply select a keyword to randomise and right click the mouse and choose ‘’.

Resulting in the following tag being added

So we can use the new random keyword tag and get around the latest google penguin updates by varying our anchor text. I would also recommend adding in your target url into the keyword area as well so that you get direct url placement as anchor.


Web 2.0 Article Posting: To post articles to our web 2.0 sites we must first choose the sites to post. To do this we need to click on the ‘web 2.0 site creation tasks’

Note that you can ‘ONLY’ choose sites from the web 2.0 site list if you have an account created for that site. If a site is chosen without an account you will see an error displayed. In the above screenshot you can see a set of sites marked in red; these red sites do not have accounts created so cannot be posted to.


The posted links can automatically be submitted to both rss and social bookmarking sites by selecting the option below.

The automatic posting will take place once the web 2.0 posting has been completed. You can also change the robot captcha mode via a click of the ‘Captcha mode’ button.

Once all your options are set you can post to the web 2.0 sites using either the toolbar or site creation tasks ‘start posting button’


Article Directory Poster The article directory poster has the exact same functionality as the web 2.0 poster module except for the following options

- Find links function that retrieves the link and link status of an article - A category field to find the correct posting category within the article directory - User details section that is used when updating an article directory profile - Additional summary and resource area in the article text

Note as with the web 2.0 data; the article data is all extracted from the current campaign data items.


The article spinner contains an extra 2 fields in

- Summary where no html is allowed - Resource box where you can add a hyperlink or url with text

Some example resource text options have been added to the menu when posting. You can also add a ‘random link’ tag within the footer but not a ‘last link’ article tag

Note in this section we have the addition of the ‘summary’ and ‘resource’ areas. You can also preview any added article I your default browser by clicking the ‘preview in browser’ button. You should preview ‘ALL’ articles before posting to ensure they do not contains errors. You can also check the average word / char count of the posted article.


Post to the article directories

Select your sites and click the ‘start posting’ button on the form or the ‘start posting’ button on the toolbar. Any log data displayed after posting can be saved to file using the ‘Export Log To File’ button as shown:

You retrieve any article links and there current status using the ‘find links’ button. As per the web 2.0 screen you can add the current campaign article links to the url list by clicking ‘add article links’ button.


Web 2.0 Linker – Mini network Creator (Pro Version Only): The web 2.0 mini network creator, allows you to auto create sets of interlinked web 2.0 sites that will auto link between the web 2.0 sites and your main site URL. Note that the preferred and more randomized way to create link structure needs to be done via the web 2.0 sites poster and not the linker. This is ‘not’ a standard link wheel and thus will not have a link wheel signature. We are creating a mini network of sites that comprises of a set of 5 web 2.0 properties linked in a network type structure as shown.

These main functions of the web 2.0 linker screens are the same as the web 2.0 Site Creator screens except for the following. Note that the same sites can be loaded within both the Web 2.0 site creator and web 2.0 linker screens. Ultimately we want to create base networks of sites links to our money site then re-link a new mini-net to each web 2.0 property to give a network of links spreading authority and rank between all sites. Note that this functionality will be expanded with the additional of new link network structures.


Main site data The main site data is exactly as per the web 2.0 poster screen with the following exceptions

- The ability to scrape and save a set of unspun articles that can be posted - Post a to a set of auto interlinked sites

Download a set of articles to be posted

To download a set of article we must follow the steps shown

- Add a keyword phrase OR click the ‘add keywords’ to add our keyword list - Click the ‘download articles’ to open the article scraper process

Follow the process as outlined earlier BUT choose the set of articles to be exported. To post these articles choose the 'submit loaded articles' option when posting.


Add New Articles:

Click the ‘Add/Save’ to save the article to the article list, which will be shown as follows:


Network Content Creation:

Network creation List The network creation list contains the list of web 2.0 sites that the ‘link network’ will use to create and link within its structure. The link network consists of a set of ‘five’ sites and the list can be randomised or manually chosen. To start this process you first click the ‘Randomise’ button to re-randomise the list. The randomise function will ‘ONLY’ choose sites that have accounts setup against. If a site doesn’t have an account setup against them it will not be chosen. You need at least 5 sites with valid account to be able to create a mini network of sites within the software. You can also choose alternative sites from the drop down lists if so desired but you cannot choose the same site twice within your group of 5 sites. Note that the ‘captcha Mode’ is selectable within this screen; simply click the ‘captcha mode’ button to switch between auto captcha and manual captcha mode.


Posting Options

Before you post to the link network you must setup the following options:

- The type of articles you want to post o Your spinnable article (submit spinnable articles) Your list of downloaded

articles (submit downloaded articles)

Note that only one of these options can be chosen with the default being the spinnable article text.

- Social Submissions

o This will post your links to you list of social bookmark accounts that were created within the ‘create accounts’ screen.

o The ‘random’ option will post each link to only ‘three’ of your Social bookmarking accounts.

o The ‘all’ option will post your links to all of your social bookmarking accounts.

- Rss Feed Submissions

The rss feeds submissions will auto post your rss feeds from your web 2.0 sites to the list of rss directories as defined in the software. This will include the rss ‘accounts’ that were created within the ‘create accounts’ area of the software.

Click the ‘START POSTING’ option to start to post your data to your web 2.0 sites.


Blog Network Poster The Blog network poster allows you to post article to your own ‘STANDARD’ wordpress sites. As per the previous modules all of the campaign data is retrieved from the campaign data and used in posting. The main difference in this module is that all the sites setup is static throughout all campaigns. So you set up the accounts in this area once.

Note: You need to set your wordpress blogs to allow XMLRPC posting to allow the software to post to that site. If you do not then the post will fail. Within your wordpress dashboard you need to go to the menus ‘settings’ writing


And set the XML-RPC Tick box as shown then click the ‘Save Changes’ button to save the new settings.

Loading in your own sites You load in your own wordpress sites into the software either

- Via a plain text file - From the clipboard - Manual entering the data

When loading from text file or from the clip board you need to the this exact format <SITE URL with http at the start>, <USERNAME>, <PASSWORD> And 1 site per line as follows: http://www.site1.com, steve123, pass123 http://www.site2.com, steve153, pass123 http://www.site3.com, steve223, pass123 http://www.site4.com, steve334, pass123 Posting to your wordpress sites You add / scrape your articles as you would within any other module and as per the web 2.0 module you can add in ‘lastlink’, ‘randomlink’ and static url tags into the article.

To post the spun article you simply goto the ‘user network poster’ tab and select the sites you want to post out to as shown

http://www.site1.com/





Note that you can also auto bookmark your links and also add in footer links if required.


Press Release Poster (Pro Version Only) The press release poster allow you to post press releases to several directories. As per the previous modules all of the data is retrieved from the campaign data and used in posting.

Note that the press release poster has less option than the other areas of the software but does require a company name to be filled in the post. You add your press release as per the other modules into the spinnable press release area and select sites then post.


Now we simply select the sites to post to and click the start posting button


Social Bookmarking Automatic Posting: The social bookmarking module allows auto social bookmark of your urls against spinnable anchor and description text. Note the spinning syntax used in the anchor text / title and the description fields. If you wanted to spin part of a title you would create this as per the following example: Anchor text to spin amazon, eBay, click bank How to build {amazon|ebay|clickbank} stores

In this screen you can change campaign using the ‘load campaign data’ dropdown. You can also clear the current data using the ‘clear data button’; this will not save the changed data. When loading links, you can load links via the campaign, via file or from the clipboard using the ‘load link’ drop down. .


All fields are required to be filled in before you can run the social bookmarking tool. NOTE that you can only post to sites on which you have a valid account created. The bookmark options ‘Bookmark All’ and ‘Bookmark partial’ allow you to post your links to either every selected site or to post to ‘n’ number of the selected sites (3 is the default for the partial bookmark option.

When you change the campaign and links the social data + the account get updated. You can just load account data via the load campaign account dropdown within the bookmark sites tab.

You need to select the sites to use within the bookmarking process and the toolbar has two options to select all or select no sites.

When one of these options is chosen the ‘bookmarking sites / account’ tab will automatically be selected so you can choose / change the sites to use.


RSS Automatic Submissions: The RSS functions allows you to auto submit your urls against spinnable anchor text to a selection if rss sites. Note the spinning syntax used within the anchor text field. If you wanted to spin part of a title you would create this as per the following example: Anchor text to spin Nintendo Wii, Nintendo dsi, Nintendo dsi XL {Nintendo Wii | Nintendo dsi | Nintendo dsi XL} Games Reviews of the Year 2010

You can paste your RSS links from the clip board and also change campaign using the ‘load campaign data’. Once you have loaded your rss links, you select the sites that you want to submit your rss feed urls to then click the ‘Submit Rss feeds’ toolbar button to start the auto posting process.

Note if any of the rss directories selected require logins then you need to have the accounts created (can be carried out within the ‘create accounts’ area from the main menu) prior to running this process.


You can select all or none of the sites using the ‘select all’ and ‘select none’ toolbar buttons and this will auto select the accounts / sites tab area

The captcha mode is also available within this screen due to captcha cracking requirements for some of the directories after login. Within the RSS posting screen you can also do additional MASHUPS of your RSS feeds. This is something that you should be doing for additional promotion.

The software utilises the sites ‘rssmix.com’ and ‘feedkiller.com’. First choose to create a feed killer rss mash then when created, create an rssmix URL. Mashing the urls will give in effect re-promote your other rss feeds. The more promotion we have the better in reality for our sites and traffic.


Email Verifier The email verifier area ‘SEO Link Robot’ to auto process email confirmations (for signed up sites and accounts) and have those confirmations auto verified via your pop3 mailbox.

The pop3 settings screen will be auto filled with the last chosen ‘user’ profile data as setup within the ‘create accounts’ stage. To verify the emails you simply click ‘Start verification process’ toolbar button and the process will traverse your mailbox and auto verify each link that is found within each email. The results will be display within the information windows. Each verified email message id will be stored within a local file, therefore emails will not be auto verified or processed a second time. If any email requires confirmation via a browser window, a new browser window will open and the email verified before the window is closed. If you want to delete any emails after they have been verified then simply select the ‘Delete Emails’ checkbox. Note that every time the email is processed the log data is added to an email log file which included the link validated and any passwords retrieved. This file can be found in your ‘default’ folder.


Proxy Manager The proxy manager area allows you set setup a list of ‘proxy servers’ within ‘SEO Link Robot’. These proxy servers will be auto used when you create / post to accounts in each of the modules.

Within the proxy manager screen you can ‘reload proxy lists’ to reload the current list if the proxy file has been changed. Add proxy - You can add single proxies using this option

NOTE: When adding a private proxy with a user and password you need to use the following format: IP/SERVER:PORT:USERNAME:PASSWORD Ie. 123.23.23.12:8080:steve:pass123


Add List – This option allow you to add a list of your own proxies to the software within the GUI.

The ‘load proxy list from file’ option can be used to read the data from a text file. You can alternatively paste in your list into the main text area. Click ‘Add to main proxy list’ to add to the current proxy list data. If you want to replace the current list you must first select ‘Delete All’ in the proxy manager area before adding new proxies.

The ‘enable / disable’ proxy option will all you to enable or disable the current selected proxy.

The set proxy option will set a random proxy from the list. If the set fails, re-click the option to try another proxy. The test proxies option will test the whole proxy list and show valid and invalid proxies before removing all invalid proxies from the list.


Site Pinger The site Pinger utility allows you to further promote your site links via RPC ping sites. This will inform the search engines that you sites have new content and will then spider and index those sites.

You can either manually add your comma separated keywords and sites (this can be pasted using ctrl+v) to the required fields or change the campaign using the ‘load campaign data’ dropdown. All campaign links and keywords will be automatically added to the screen. Click the ‘Ping URLS’ button to start the pinging process. The indicator bar will show the progress of the process and this process can be cancelled at any time using the ‘cancel’ button. That covers the main functions within the ‘SEO Link Robot’ software, so go and start building those links and your rank starting NOW!!!!

Meta Indexer

The software itself comes in 3 parts.

- loading your links - Pinging your links

- Meta Indexing your links

Main Screen:

When you run the software you will be presented with the following screen.

The ‘title / keyword’ area is a spinnable area used within the pinging process to

ping the RPC site with sites and keywords to index for those sites.

To spin anchor text you simply separate the anchor / keywords with a | character

as shown:

If you were to enter the following keywords:

- Nintendo Wii

- Nintendo dsi

These would be entered as Nintendo Wii | Nintendo dsi


Toolbar Options:

Import Links from file:

This button allows you to import sets of links from file. The data within the file can be either comma or pipe delimited and the URL can be in any field. The file

‘MUST’ be in text format.

Import Links from the clip board: This button allows you to import sets of links from the windows clipboard. Simply

select your links and save to the clip board then press this button and they will

be added to the software. The clipboard copy follows the same rules as above.

Set proxy server:

This button allows you to setup a proxy server address to use when you RPC and

Meta index your links.

Ping your selected links:

This button starts the ping process for your selected links to the RPC ping

directories.

Meta Index your selected links:

This button starts the Meta indexing process for your selected links.

Importing Links from file:

To import links from file you click the import button and an open file screen is shown. You choose the file with the links in (has to be a text file) and click open.


Note that if you are using ‘SEO Link Dominator’ you can export your links directly

out to file from the ‘Tools’ area and it will auto pickup your [title] tags’

Your import file can contain a title tag that will import the value directly into the

‘title / keywords’ area of the screen.

This title tag has the following format:

[TITLE]#KEYWORDS

Note the title and keywords are separated by a # separator.

Example:

[TITLE]#Nintendo Wii|Nintendo DSi|Free Wii Games

‘SEO Fast Indexer’ only supports links that are separated by either a comma or

pipe. The URL can be in any column of the file but the first URL (starting with

http: or www.) will be imported from that line. If a line of data has multiple urls

then only the first one will be retrieved.

Example file:

[TITLE]#Nintendo Wii|Nintendo DSi|Free Wii Games http://soft.com.sg/forum/members/mrnintendo.html

http://www.algore.org/user/mrnintendo

http://www.dragonavenue.com/forums/member/9999

Import Links from the clip board:

Importing links from the clip board is exactly the same as importing the links

from file and the same syntax is used.

Once import you will see the following


The first thing you must do is select which links you want to have indexed. All

selected links will be used and any that are not selected will not. The side

buttons allow you to select all links / none links and selected links (hold ctrl + click the column).

Add single urls:

If you wish to add additional single urls you simple enter the URL and click the

‘add url’ button as shown.

Ping your selected links:

To start the ping process you simply press the ‘ping’ button on the toolbar and the following screen will be displayed.


The ping screen shows the ping we are about the ping. Clock start to start the

pinging process or cancel to cancel the process.

Note: if you click the cancel it can take up to 30 seconds to cancel all of the

queued pinging processes.

Once you click the start button your will see the sites that are being pinged.

Once pinging is complete you will be informed by a message box and the screen

will close.


To see a list of the sites used in the pinging process simply click the ‘Ping Site

List’ tab as shown:

You can add and remove RPC site by navigating to the install folder and

modifying the text file ‘pinglist.txt’

Meta Index your selected links:

The Meta indexing process comes in 2 parts.

First choose how many link you want to index to. The default is the standard

3000+ sites.

You can change this by clicking the ‘quick indexing site list’ tab and changing the

drop down value to either ‘3000’ sites or ’30,000’ sites as shown. Ensure you press the ‘LOAD’ button to load in the data from file.

Note that running a Meta index of a 30000+ list will take a lot longer to run that

using a smaller list.


Now select the ‘Fast Index List’ button

Now you need to choose the number of threads to parallel run when indexing.

Note that for low memory machine choose either 100 or 200 threads only. This

will take longer to run but will not use up all the available memory available.

Select your threads from the drop down (default is 100)

The ‘Ping Meta URL’ is the number of rpc ping sites that the software will

randomly submit the Meta URL.

Then click ‘Start Meta Indexing’. At this point all the site threads will be created

and queue up and indexing will start.


As with the pinging the threads can be cancelled and processing will stop.

Depending on the meta indexing sites used (3k or 30k) it may take up to 30-40

second to cancel all the thread that have been queued up to run.

Set proxy server:

This screen allows you to define a proxy server to be used when you do your

Meta indexing. Only use this function if you are using private proxy servers. The

amount of data used to submit will disable a public or free proxy.

This wraps up the ‘Seo Link Robot’ guide of the functions within the software... Please ensure that you also read the other guides included within the software to gain maximum usage and benefit of the features. If you have any queries on the software then please don’t hesitate to contact me. Regards Stephen Hawkins


Recommended Resources:

$47 Discounted ‘The Best Spinner’ link – as a seo link robot user you can benefit from using the best spinner for

$30 off the full price http://www.seolinkrobot.com/tbs

Recommended VPN service

http://www.trafficmystic.com/hma

Recommended proxy service

http://www.trafficmystic.com/yourproxies

Recommended auto proxy scraper

http://www.trafficmystic.com/proxygoblin

SEO Link Robot Videos – You can find all the tutorial

videos for seo link robot at the following URL: http://www.seolinkrobot.com/videos.htm SEO Link Robot Support – If you have any support questions or issues with the software (such as a site no

longer functioning) then please submit a support ticket at the following URL: http://www.seolinkrobot.com/support/

SEO Link Robot Forum – If you have any questions or need advice then please visit the forum at:

http://www.seolinkrobot.com/forum/

SEO Link Dominator – Semi automated profile link building software. Import link packets, track accounts and double pass link drops.

http://www.trafficmystic.com/seold/

http://www.seolinkrobot.com/tbs

http://www.trafficmystic.com/hma

http://www.trafficmystic.com/yourproxies

http://www.trafficmystic.com/proxygoblin

http://www.seolinkrobot.com/videos.htm

http://www.seolinkrobot.com/support/

http://www.seolinkrobot.com/forum/

http://www.trafficmystic.com/seold/

SEO Link Robot Guide v2.0

Documents

Transcript of SEO Link Robot Guide v2.0