Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry...
-
Upload
joy-joyce-levens -
Category
Documents
-
view
224 -
download
2
Transcript of Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry...
![Page 1: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/1.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Bulk Solids SamplersBulk Solids Samplers
Sentry Equipment Corp
![Page 2: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/2.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ObjectivesObjectives
• Review Sentry bulk solids samplers– Model Review– Where to apply– Where not to apply
• Application overview
![Page 3: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/3.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Bulk Solids Samplers VideoBulk Solids Samplers Video
![Page 4: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/4.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Bulk Solids BasicsBulk Solids Basics
• Where to sample from– Gravity
–Bins, hoppers or chutes– Pressure/Vacuum Conveying
–Dense phase conveying–Dilute phase conveying
– Air slides
![Page 5: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/5.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Bulks Solids SamplerBulks Solids SamplerStandard FeaturesStandard Features
• Material contact components constructed of 304SS or better
• Standard Seals– Glass Filled Teflon® seals on former
Gustafson products– Pure Teflon® available for food or sanitary
applications at no extra cost– EP on ISOLOK® samplers
– However, many other elastomers are available
![Page 6: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/6.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Bulks Solids SamplerBulks Solids SamplerStandard Features (cont)Standard Features (cont)
• Oil-less Air cylinders • TEFC Gear motors • One piece machined and highly polished
augers– Provides structural integrity and easy
release of product• White nitrile mounting gasket• 4- way explosion proof solenoid valve • Air filter, regulator and pressure gage
![Page 7: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/7.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
• Sample container accessory Kits
• Multiple sample collection devices
• Custom mounting adapters
• Pre-mount spool sections
• Sample tube purge• Sampler Enclosures
• Sampler Heaters • SEVERAL optional
materials of construction and seal choices
• Several coating options for wear and corrosion resistance
• Extended sample tube lengths for larger chute sizes and hoppers– Up to 600mm in length
Bulks Solids Sampler Bulks Solids Sampler Attachments and OptionsAttachments and Options
![Page 8: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/8.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Mounting AdaptersMounting Adapters
• Sentry manufactures several different types of mounting adapters that are used to connect the sampler to the process
• ISOLOK® and model B1 units connect via tri-clamp
• All other bulk solids units have a variety of adaptors suited for many installations
![Page 9: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/9.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Pre-mount Spool PiecePre-mount Spool Piece
• Used when vertical line sizes are larger than 100mm OD
• Typically used in pneumatic conveying applications– Models PR, R and RX
• Can also be used in gravity drop applications– Models PR, R and RX
![Page 10: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/10.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Examples – Pre-mount Spool Examples – Pre-mount Spool PiecePiece
![Page 11: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/11.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Concentric Pre-mountConcentric Pre-mount
• Used when vertical line sizes are 100mm OD and under
• Creates an expansion which allows for sample tube extension
• Typically used in pneumatic conveying applications– Models PR, R and RX
• Can also be used in gravity drop applications– Models PR, R and RX
![Page 12: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/12.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Eccentric Pre-mountEccentric Pre-mount
• Used when horizontal line sizes are 100mm OD and under.
• Only used in pneumatic conveying applications– Models PR, R and RX
![Page 13: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/13.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Example – Eccentric Pre-Example – Eccentric Pre-mountmount
![Page 14: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/14.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Weld on or bolt on mounting Weld on or bolt on mounting
adaptersadapters • Used primarily for hoppers or bins
Weld on Bolt
on
![Page 15: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/15.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Horizontal flow style
Adapter WrapAdapter Wrap
![Page 16: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/16.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Adapter Wrap – Vertical Adapter Wrap – Vertical FlowFlow
Used with RX-45
Used with RX-90
![Page 17: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/17.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Examples – Adapter WrapExamples – Adapter Wrap
![Page 18: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/18.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Tri-clover Weld Ferrule Tri-clover Weld Ferrule
• Used on ISOLOK® and Model B1 models
• Kits come complete with gasket, clamp, close coupled ferrule and closure with lanyard
![Page 19: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/19.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Examples – Tri-clampExamples – Tri-clamp
![Page 20: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/20.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Air Slide MountingAir Slide Mounting
• Typically used in cement applications
• Penetrate through the bottom of the air slide and membrane
• Incorporates a purge ring to keep powder from migrating between sampler tube and housing
![Page 21: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/21.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Sentry Bulk Solids SamplersSentry Bulk Solids Samplers
• Point Style Sampler Models• A, B1, PR, R & RPG, SAK, SAE, SAH
• Strip Style Sampler Models• D2, MG, RB & RX
• Cross Cut Style Samplers• SA & GA
![Page 22: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/22.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Point SamplersPoint Samplers
![Page 23: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/23.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Point SamplersPoint Samplers
• Takes a sample from a point in the material stream
• Used when conducting chemical analysis or when material is homogenous
![Page 24: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/24.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ISOLOK®ISOLOK®
![Page 25: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/25.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Industrial Industrial ISOLOKISOLOK® ® SamplersSamplers
• Process temperature – -40°F to 550°F (-40°C to 288°C)
• Available seals include epdm, viton®, filled Teflon®, Kalrez®, Buna-N, Halar®, Urethane, etc., etc., etc.
• Standard material of construction is 316 ss– Optional materials: Hastelloy®, Titanium, AL6XN®,
Carpenter-20, Ferralium, Monel, Kynar®, Zirconium, Nickel, Incoloy®, Inconel®, 17-4 PH, 400 series stainless, virtually any machinable material
• Angle drilled purge ports direct purge to either side of the sample annulus to assure total sample discharge
![Page 26: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/26.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
• SAK – 16 cc (pressure seals) - 18 cc per sample stroke • SAH – 45 cc (pressure seals) - 50 cc per sample stroke • SAE – 90 cc (pressure seals) - 100 cc per sample stroke • Flush or extended Nose (packed or free falling material)• Batch or Composite Sampling• Process pressure – Vac to 200 psig (14 barg)• Process temperature – up to 550°F (288°C)• Material types – dry & flowable (powders, pellets, grains,
etc.)• Material size – up to ¾ in. (19 mm) diameter (SAE
model)• Installation – bins, hoppers, conveyors, chutes
ISOLOK®ISOLOK® Bulk Solids Samplers Bulk Solids Samplers
![Page 27: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/27.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ISOLOK® Body ISOLOK® Body ConfigurationsConfigurations
Flush Nose Extended Nose
Angle drilling for purge
![Page 28: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/28.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ISOLOK® Seal ISOLOK® Seal ConfigurationsConfigurations
• “Floppy” seals for gravity drop applications
• Pressure seals• Width of seal
reduces inside dimension of annulus therefore reducing the sample volume
![Page 29: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/29.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ISOLOK® Flush NoseISOLOK® Flush Nose
• Used on hoppers and bins where there is accumulated or slow moving of material
![Page 30: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/30.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
ISOLOK® Extended NoseISOLOK® Extended Nose• Used in vertical drop
chutes where material is in free fall
• The extended nose provides a means to stop the material and fill up a fixed volume of sample
• When the plunger extends, all old or stagnant material is pushed back into the process and the plunger dwells extended to capture fresh sample
![Page 31: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/31.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model SAKModel SAK
• 18 cc per cycle (using non-pressure “floppy” seals)
• 16 cc per cycle (using pressure seals)– Thicker seals reduces the overall
volume of the sample annulus• Compact design
– Installation envelope approximately 250mm long by 250mm high
• Process connection via 2” tri-clamp
• Maximum particle size is 9mm
![Page 32: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/32.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model SAHModel SAH• 50 cc per cycle (using non-
pressure “floppy” seals)• 45 cc per cycle (using pressure
seals)– Thicker seals reduces the overall
volume of the sample annulus• Compact design
– Installation envelope approximately 350mm long by 350mm high
• Process connection via 2.5” tri-clamp
• Maximum particle size is 16mm
![Page 33: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/33.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model SAEModel SAE
• 100 cc per cycle (using non-pressure “floppy” seals)
• 90 cc per cycle (using pressure seals)– Thicker seals reduces the
overall volume of the sample annulus
• Compact design– Installation envelope
approximately 480mm long by 400mm high
• Process connection via 3” tri-clamp
• Maximum particle size is 19mm
![Page 34: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/34.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Where to ApplyWhere to Apply
• Gravity drop chutes, bins, hoppers, screw conveyors, air slides, fluid bed dryers, vacuum receivers
• Friable materials• Materials with low melt temperature
– I.e. Toner powder
• Most materials– Even TiO2 when material is moving and sampler
incorporates a purge function
![Page 35: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/35.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Where Not to ApplyWhere Not to Apply
• Pneumatic convey lines• Variable gravity flow with no product next to
chute wall• Customer requires strip or cross-cut sample
![Page 36: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/36.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model AModel A
• Screw conveyor sampler uses a slide gate with an adaptor to take the sample
• A pneumatic actuated cylinder opens the slide gate over a hole positioned in the conveyor or chute to remove sample
• Used to sample grains, free flowing powders, pellets
![Page 37: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/37.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model AModel A
• Recommended Product Size– 1-1/2 “ (38mm) standard unit
• 65 mesh to 13mm material– 3” (76mm) standard unit
• 65 mesh to 25mm material (Note: Finer material may leak by slide)
• Standard Temperature Range:– -34 degrees C to +71 degrees C
![Page 38: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/38.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model AModel A
• Most common issues– Product caught between slide
and main body– Tension on slide gate too tight– Installations where product
size is less than 65 mesh– Air pressure to air cylinder
insufficient (minimum 60 psi)– Solenoid 4-way valve
restrictors clogged or not adjusted properly
– Mounting plate does not match customer’s screw trough
![Page 39: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/39.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model B1Model B1
• Sample from vertical and sloping chutes, gravity lines, and hoppers
• Tube fixed in stays in the product stream
• Design available to meet 3A section 81-00
• Designed for sampling milk and pharmaceutical powders
![Page 40: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/40.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model B1Model B1
![Page 41: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/41.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model B1 - ManualModel B1 - Manual
![Page 42: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/42.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model PRModel PR
• Most common model for pneumatic convey lines
• Designed for free flowing materials
• Fixed volume collected in the sample tube and discharges into the container when retracted
• Internal Teflon sealing rings isolate line pressure (max pressure is 4 bar)
![Page 43: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/43.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model PRModel PR
![Page 44: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/44.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RModel R
• Pneumatic conveying sampler for non-free flowing materials
• Fixed volume collected in the sample tube
• In the retracted position an auger drives the product to the discharge opening
• Internal Teflon sealing rings isolate line pressure (max pressure is 4 bar)
![Page 45: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/45.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RModel R
Control timing is critical to assure gear meshing
![Page 46: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/46.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RPG - AutomaticModel RPG - Automatic
• Designed for automatic strip sampling from spouts, hoppers, transfer chutes or end of conveyor belts
• Collects a fixed volume of sample from gravity applications
• Pneumatic cylinder extends the sample tube and into the product stream sample cup is down
• Rotary actuator rotates the tube and sample cup is in the up position
• Tube retracts, rotates and drops sample into container
![Page 47: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/47.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RPG - ManualModel RPG - Manual
![Page 48: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/48.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Point Samplers – where to ApplyPoint Samplers – where to Apply
• Free flowing materials Gravity chute or hopper– model B1, PR, R, RPG, SAK, SAE, SAH
• Non Free flowing materials- gravity chute or hopper– Models B1 and R, SAK, SAE, SAH
• Free flowing materials – pneumatic convey– Model PR
• Non free flowing materials – pneumatic convey– Model R
![Page 49: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/49.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Strip SamplersStrip Samplers
![Page 50: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/50.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Strip SamplersStrip Samplers
• Takes a sample from a narrow portion of the stream
• Used in situations where product segregation exists
![Page 51: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/51.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RBModel RB• Strip sampling from dilute
phase pneumatic conveying systems (up to 15 psig), transfer chutes, bins and hoppers
• Pneumatic cylinder extends the sample tube and auger into the process stream
• Auger is rotating while the tube is extending and retracting
• Pressure is not isolated from the collection container when sampling
![Page 52: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/52.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RBModel RB
Shear Pin
![Page 53: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/53.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model D2Model D2• Strip sampling of free
flowing and non free flowing products in a gravity chute or hopper
• Sample tube remains in line and rotates to expose aperture to remove sample
• Close tolerance auger draws material to the discharge point
![Page 54: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/54.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RXModel RX
• Strip sampling from dilute phase pneumatic conveying systems (both pressure and vacuum), bins and hoppers
• Samples free-flowing powders, granules, pellets, grain and seed
• Pneumatic cylinder extends sample tube into product flow
• Product is continuously discharged while sample tube is extending
• Line pressure is not isolated
![Page 55: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/55.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RX - 45Model RX - 45
![Page 56: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/56.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RX - 90Model RX - 90
![Page 57: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/57.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model RX-90 with Nose PieceModel RX-90 with Nose Piece
Radius Nose Piece
![Page 58: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/58.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model MGModel MG
• Strip sampling of free flowing products from a gravity chute
• Sample tube remains in line and rotates to expose an aperture remove sample
![Page 59: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/59.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model MG – Electric Model MG – Electric ActuatedActuated
![Page 60: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/60.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model MG – Air ActuatedModel MG – Air Actuated
![Page 61: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/61.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Strip Samplers – Where to ApplyStrip Samplers – Where to Apply
• Free flowing materials Gravity chute or hopper– Model D2, MG, RB & RX
• Non Free flowing materials- gravity chute or hopper– Models D2 & RB
• Free flowing materials – pneumatic convey or air-slide– Model RX– Sample container will be exposed to line pressure while product
is being taken
• Non free flowing materials – pneumatic convey or air-slide– Model RB – Sample container will be exposed to line pressure while Product
is being taken
![Page 62: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/62.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Cross Cut Cross Cut SamplersSamplers
![Page 63: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/63.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Cross Cut SamplersCross Cut Samplers
• Takes a cross-section of the entire product stream
• Provides the most representative sample, but requires a lot of headroom
![Page 64: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/64.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model SAModel SA
• Crosscut samplers for gravity chutes, vertical or angular spouts, etc.
• Intended to sample grain, coal, plastics, chemicals, seeds, flour, sand, etc.
• A lot of moving parts and could be higher maintenance
• Pneumatic rotary actuator actuates the sampler pelican
![Page 65: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/65.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Conveyor Belt SamplerConveyor Belt Sampler
![Page 66: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/66.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
DS-3 SERIES BELT DS-3 SERIES BELT SAMPLERSSAMPLERS
![Page 67: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/67.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
DS-3 SAMPLING TECHNIQUEDS-3 SAMPLING TECHNIQUE
• Conic Sweep Sampling Action – “Pitch and pour”
• The drive shaft of the rotary scoop is on a 45º angle, causing the arm to sweep a conic pattern.
• Simple Sampling Technique
• Each 360º rotation of the arm provides 12-16 cu. in. of sample. Brake motor stops forward
• movement of the arm at top of the arc, discharging sample into integral hopper.
![Page 68: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/68.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Typical belt samplerTypical belt sampler
![Page 69: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/69.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Belt Sampler VideoBelt Sampler Video
![Page 70: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/70.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Belt Sampler Features and BenefitsBelt Sampler Features and Benefits
• Automates the process of sampling from moving conveyor belt to provide a safe, effective, clean and consistent means of sample collection
• Flexible mounting location – Can be mounted anywhere along the conveyor instead
of in the crowded head pulley belt discharge
• Overall height is less than 610mm– Fits where low headroom is a requirement
![Page 71: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/71.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model DS-3 Standard FeaturesModel DS-3 Standard Features
• Sample arm speed is adjustable to suit belt speeds up to 274 mpm
• Ease of installation• Minimal wear items
– Low cost of ownership
• Scoop moves 10% faster than speed of and in same direction as product flow on belt – Reducing wear and overall size of the unit
![Page 72: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/72.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Model DS-3 OptionsModel DS-3 Options
• Left or right side discharge• Sample cabinet• Sample bucket size
– 30-40 cm3– Custom designs available
• Explosion proof
![Page 73: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/73.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
• Designed to collect dry material samples to avoid cross contamination
• Available in 8, 16, and 24 collection positions
• Controlled by a PLC and interfaces with the sampler controller
• Offered with standard TEFC or explosion proof motors
Model ICModel IC
![Page 74: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/74.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
Controls Controls
![Page 75: Sentry Equipment Corp Sampling Solutions Specialty Heat Exchangers Bulk Solids Samplers Sentry Equipment Corp.](https://reader038.fdocuments.net/reader038/viewer/2022102923/551b69c4550346d6338b4a6e/html5/thumbnails/75.jpg)
Sentry Equipment CorpSentry Equipment CorpSampling Solutions • Specialty Heat Sampling Solutions • Specialty Heat ExchangersExchangers
• Controls for the bulk solids samplers are generally the same as automatic liquid samplers
• We highly recommend that Sentry supplies controls for samplers that include motors or two actuators.
• Samplers Sentry should supply controls for are:– B1, R, D2, RPG, RB, MG and IC cabinet
ControlsControls