SEN Plus Low Voltage Switchgear

REGIONAL OFFICES

NORTH

BRANCH OFFICES

Gurgaon

GE India Industrial Pvt. Ltd.5th Floor, Building No.7A DLF Cyber City, DLF Phase-IIISector 25 A, GurgaonHaryana – 122002Ph: (0124) 4808000Fax: (0124) 4226911 / 4226912

Chandigarh

GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905

Jaipur

GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012

Lucknow

GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909

SOUTH

Bangalore

GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199

Chennai

GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474

Coimbatore

GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529

WEST

Mumbai

GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611

EAST

Kolkata

GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071

Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552

HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]

Toll Free No:18001024343

Customer Care:[email protected]

g and General Electric are registered trade marks of General Electric Co. USA©

Ahmedabad

GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/65427389Fax: (079) 26460637

Pune

GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Ph: (020) 41266999Fax: (020) 41266109

Cochin

GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400

Hyderabad

GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272

We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.

For any further information, visit us at http://www.geindustrial.com

SEN Plus Low Voltage Switchgear

Index1 Professional Solution with High Performance

2 System Overview

3 Application

4 Technical Data

5 Feature

9 Structure

14 Dimension and Arrangement

15 Main Components

16 StandardandCertificates

17 Standard Solution

21 Primary Scheme

1

Professional Solution with High PerformanceSEN Plus is a new generation low voltage switchgear based on GEA Plus series, which has significant improvement on system

performance and safety.

SEN Plus has passed full type test according to latest international standards, especially IEC61439-2, IEC/TR3 61641 and IEC60529.

System running continuity and stability are available.

SENPlusprovidessafe,efficientandintelligentsolutionasanintegratedlowvoltagedistributionplatform.

2

System OverviewSENPlushaspassedfulltypetestaccordingtonewIECstandard,delivershighreliability,safety,flexibility,togetherwithintelligence

solution. SEN Plus is the advisable choice for low voltage distribution system.

The System Includes Following Parts:•PowerCenter

Main distribution panel, modular construction, rated current up to 6300A.

•MotorControlCenter

Motorcontrolcentercanprovidefixedtype,plug-inandwithdrawablemodulesfor

feeder and motor starter application. The range of module size varies from 4E to 36E.

•Bus-Coupler,TransitionPanel,CornerPanel

Optimize busbar connection between panels and transformer.

•MotorProtectionRelay

Intelligence motor protection relay can be integrated into motor control center, which

providescomprehensiveprotection,control,fieldbusandEthernetcommunicationfunction.

•KeyComponents

High performance distribution and motor control components, includes air circuit breaker

EntelliGuardTMG,M-Pact,MCCBRecordPlusandmotorstarterSurion.

Reliability

Intelligence

Flexibility

Safety

3

Application• Industrial

Oil & Gas

Automotive

Printing

Pharmaceutical

Chemical

Mechanism

• InfrastructureTransportation

Waste management

Water treatment

Power plant

Airport

•CommercialBuildingOffice

Data center

Warehouses

Supermarket

School

Hospital

4

Technical DataSENPlusSpecificationStandard

Type-tested low voltage switchgear and controlgear

combinations (TTA)IEC61439-2;GB7251.1-2005;IEC60068-2-57;IEC/TR361641

Test Report KEMA,CCC,IPH,Seismictest,Arcprotection

Electrical Data

Rated insulation voltage (Ui) 1000V

Rated voltage (Ue) 400V/690V

Rated frequency 50Hz

Rated impulse withstand voltage 8kV

Main busbar

Main busbar rated current (Ie) 1000-7600A

Short time withstabdard current (Icw) Up to 100kA

Rated peak withstabard current (Ipk) Up to 220kA

Vertical busbar

Vertical busbar rated current (MCC) 850-1900A

Short time withstabdard current (Icw) Up to 100kA

Rated peak withstabard current (Ipk) Up to 176kA

Structure Feature

Height 2200mm

Width 400,500,600,800,1000,1200mm

Depth 600,800,1200mm

Unit module 1E=25mm

Max modules 80E

Protection degree IP30-IP54

Internal separation form Up to form 4b

Enclosure Hot-dip zinc coated steel sheet, epoxy polyester powder

4

5

Feature

ProtectOperatorandEquipmentEffectively

• ArcProtectionDesign

• RELT Protection

• SeparationSheet

SEN Plus secures high safety level during operation. The arc proof design is able to withstand high pressure inside the enclosure during

arc conditions. RELT reduce hazard in short circuit accident. Internal separation sheets protect the operator against contact with

hazardous parts.

SEN Plus passed tests under conditions of arcing due to an internal fault

accordingtoIEC/TR61641:2008-01,satisfiedthefivesafetycriteriainstandard.

The arcs proof design ensures the enclosure withstand high pressure in arc

condition, and protect the operator on site effectively. Arc proof version is

available for Power Centers as well as for Motor Control Centers with module

sizes from 5E up to 36E.

In order to protect service personnel against the hazards of short circuits

whilst working on a power distribution system, SEN Plus can provide Reduced

Energy Let-Through (RELT) protection by using EntelliGuardTM G circuit breaker

according to customers' requirement. This allows the air circuit breaker to be

switched to its lowest short-circuit settings on service(40ms), thus limiting the

hazards concerned.

Internal separation sheet is installed between busbar and equipment

compartment. Finger proof sheets and barriers prevents accidental contacts

with hazardous parts.

1000

0.01

0.1

10000

Amps

Seco

nds

(s)

100000

Trips within40-50 Milliseconds

STDB17 timing optionsfrom 90 to 1000Milliseconds

IselectiveTrips within50-60 Milliseconds

Trips within40 Milliseconds

IRELT

IHI Speed

6

Feature

High ReliabilityWith outstanding derating feature, elaborate critical parts, rigid framework, high protection and internal separation level, SEN Plus

switchgearfulfillshighcustomerexpectations.

• Deratingperformance

• ReliableCriticalParts

• RigidFrameConstruction

The busbar system and breaker connection part of SEN Plus are optimized,

which ensure very limited derating coefficient . The derating performance is

completely testedaccording to IEC IEC61439-2andGB7251.1-2005.High

adaptability and reliability can be achieved.

The critical parts, such as main contact, insulation parts and busbar support,

influence the quality of switchgear directly. The selected critical parts all

passed strict test to ensure satisfying electric and mechanical performance.

The framework is non-welded self-supporting construction, Doors and covers

are made of 2mm sheet steel with powder painted. The maximum degree of

protection is IP54 (according to IEC 60529). The maximum form of internal

separation is up to Form 4b (according to IEC 61439-1).

7

Flexible System

• MaintenanceFreeBusbarSystem

User-friendlydesignofSENPlusallowsflexibleoperationandinstallation.Maintenancefreebusbarsystemcanbeeasilyconnectedon

site.Differenttypesofmotorcontrolandfeedermodulescancombineinsamecolumn.

All jointing points of the busbars are torque set for optimum contact pressure.

Byuseofwasherandspringwashers,theconnectionsaremaintenancefree.

Main busbar separation links are accessible from the front. It is easy to connect

busbarofdifferentpanelatsitebymeansofthefishplate.

• FastandEasyCabling

• FlexibleConfigurationandOperation

The 24 pole auxiliary contact plug is designed to facilitate the easy connection

of the control cabling. Internal separation is up to form 4b. Cable trays for

servicing of all cables are provided as standard.

According to specific needs, all available modules (fixed type, plug-in and

withdrawable) can be combined in the same column. The fully withdrawble unit

design allows fast replacement of the modules. A special mechanism allows

full operation of the module while the door is closed. Withdrawable modules

have connected, test, stand by, disconnected and removed position to satisfy

operation requirement.

8

Intelligence MCC Solution

• ComprehensiveMotorProtectionandControlFunction

• SystemMonitoringandFaultDiagnose

• CommunicationNetwork

SEN Plus integrates intelligence motor protection and control devices

(MM200/MM300) in MCC, which provide advanced protection such as

overload, short circuit , phase unbalance and stalled rotor. Multiple motor

controlschemescanbeeasilyoffered,includingDOL,Reverse,Y/Δ and soft

starter. Electronic protection relay is powerful and more reliable.

All kinds of system parameters, such as current, voltage, frequency, power

factor and device status, can be measured in time. Motor protection device

will alarm and take proper actions to avoid serious accident happening.

System maintenance times and cost can be reduced. Data analysis and

diagnosefunctionprovidesaccurateandeffectiveinformation,whichhelp

to eliminate fault rapidly and reduce system downtime.

Motorprotectionrelaysupportsmultipleprotocols,hasindependentRS485

and Ethernet interface. The information captured from motor protection

relay, electronic trip unit and meters can be accessed by field bus and

Ethernet communication network. Real-time monitoring, remote control and

parameterconfigurationcanbeachieved.

Feature

Intelligence MCC solution combines control, protection, monitor and communication function together, which help customer to reduce

operation cost and shorten system downtime.

9

StructureFrame

Enclosure

Protection Degree

High strength framework, non-welded self supporting construction and

supportingpartsareadopted.Basicallytheframecontainsoutofjust4parts:

frametubesinonlytwodifferenttypes,cornersandcornerconnectionplates.

The frame tubes, made out of rolled sheet steel, are foreseen of tapped and

punchedfasteningholestofixinternalpartsandcoversatintervalsat25mm.

All external covers and doors are made out off 2mm steel sheet with epoxy

polyester painting. Standard color is RAL 7035. The edges of the covers are

bentoverandflushmountedtotheframestructurebymeansofspacersand

self tapping screws. Overall dimensions will not increase. The standard covers

are of multi-function and can be mounted at the side or the back of the column.

Screwswithcuttingringssecuressufficientearthing.

The doors are provided with inside hinges to mount them to the frame. All doors

are prepunched for door locks, instrument plates for auxillary components and

ventilation openings. The opening angle of the doors is 130 degrees.

Frame tubes, structure parts, roof plates, internal covers and partitions sheets

are made of hot-dip zinc coated steel sheets. Front and side covers use epoxy

polyester powder painting. Ferrous parts use electro-galvanic zinc protecting.

ProtectionhasbeenverifiedinaccordancewithIEC61439-1:Section10.38.38.2

Severity test A.

The roof construction is multifunctional design. The two standard arrangements

are IP30(ventilated roof plate) and IP40 (closed roof plate). Add on materials

enables a simple upgrade to either IP41 by using a rain canopy with an

additional sealing (for roof and between columns) or to IP54 by using the

rain canopy with an additional rubber sealing (for covers, roof and between

columns).

10

StructureBusbarSystemThemainhorizontalbusbarsystem,whichcanbeexecutedasthreephasefourlineorthreephasefivelinesystem,islocatedinthe

busbar zone at the rear of the column. Double busbar structure are used for the panel whose rated current equal or larger than 5000A.

Ratedcurrentofverticalbusbarupto1900A,threeorfourpolesystemcanbeconfigured.Internalseparationsheetsdividethebusbar

zone from the equipment zone and protect the operator against contact with hazardous parts.

The standard positions are: rear top and rear middle up to 4000A, rear top and rear bottom for 5000 and 6300A. In three-pole busbar

systems, the neutral conductor of the main horizontal busbar system is located at the bottom of the column. In four pole busbar

systems the neutral conductor will be arranged under the phases.

The protection circuit is consisted of protection conductor and conducting structure. PE line runs through the whole panel. The

protectionconductor,connectedwithallcomponents,metalpartsandframework,isearthedeffectively.

Three-pole main busbar

(Rated current below 4000A)

Three-pole (double) main busbar

(Rated current 5000,6300A)

Four-pole (double) main busbar

(Rated current 5000,6300A)

Four-pole main busbar

(Rated current below 4000A)

11

Power CenterThe Power Centre is subdivided in three functional zones: busbar zone, equipment zone and cable zone. The busbar zone is located at

the rear of the column and contains the main horizontal and vertical busbar system. Internal separation sheets are dividing the busbar

zone from the equipment zone and are protecting the operator against contact with hazardous parts. Additional separation sheet

can be provided to segregate the equipment zone from the cable zone. Two sets of busbar can be installed according to application

requirement.

Air circuit breakers are installed in equipment zone, rated current up to 6300A. The equipment zone can contain maximal 2 breakers

per column, rated current up to 2500A. High availability is secured by withdrawable technique for circuit breakers.

SEN Plus can install EntelliGuardTM G or M-Pact air circuit breaker, which are equipped with intelligent trip uint . Comprehensive

protection and control function, such as zone selective interlocking, Reduced Energy Let-through, wave capture and communication,

can be provided. Selectivity, high breaking capacity and reliability are available.

Thecablezoneisdesignedforfastandcomfortablecabling.Cablingisthroughpreconfiguratedcopperlinks.Controlcablingthrough

terminal strips. Cables or busways can enter through the top or from the bottom.

12

Structure

Motor Control CenterThe Control Centre is subdivided in three functional zones: busbar zone, equipment zone and cable zone. The busbar zone can be

equipped with maximal two main busbar systems. Standard positions are the top and the middle position. Provisions are taken as

standard to couple the main busbar system to adjacent columns from the front.

Theeffectivestockingdensityintheequipmentzoneis80E(1E=25mm).Thestandardseparationtothebusbarzoneisbymeansof

mouldedplasticfingerproofsheets.FeederandmotorstarterunitsareavailableforDOL,Reverse,Y/Delta,fuseorfuselessapplication.

Rated current in feeder circuit can be up to 630A, max control power in motor unit can be up to 220kW. Fixed type, plug-in and

withdrawable modules can be mixed in one column.

The cable zone is situated on the right hand side from the equipment zone. Cable trays for servicing of all cables are provided as

standard.

13

Motor Control Center• FixedTypeModule

Fixedtypemoduleisusedforfeeder(fuseless)solution.ModulesareavailabletofixthreeorfourpolesversionofMCCBupto630A.The

linesideofbreakertobeconnectedtoVBBbymeansofrigidcopperorcables.Therangeofmoduleheightsvariesfrom8Eto24E.

• PluginModule

Plug in module is used for feeder or motor starter application (with fuse or fuseless) . The range of module sizes varies from 4E to 36E.

• WithdrawableModule

Withdrawable module (5E to 36E) can be used for all feeder or motor starter application (with fuse or fuseless). The module is easy to

use, change and maintain. The working status of the module can be indicated in front panel. Multi-function handle and interlocking

mechanism ensure reliability and prevent wrong operation.

Position Position Indication

Plug In ContactControl Circuitinterlock

Switch Of Wormgear Mech Module PositionPrimary Income

Primary Outgoing Control Circuit

Connected On On On On Inserted

Test Off On On On Inserted

Standby Off On On Off Inserted

Disconnected Off Off Off Off

Mech.

Connected

contacts

disconnected

Removed Off Off Off OffOutside

the panel

14

400/500/600

2200

600/800/1000

2200

1000/1200

2200

2200

600 200/400/600

Dimension and Arrangement

Power center

SEN Plus Dimension

Arrangement

Motor control center

Width (mm) Depth (mm) Height (mm)

Power center

Below2000A 400/500/600 600/800 2200

2500-4000A 600/800/1000 600/800/1000 2200

5000-6300A 1000/1200 1200 2200

Motor control center

Withdrawable 800/1000/1200 600/800 2200

Fixed type 800/1000/1200 600/800 2200

Plug-in 800/1000/1200 600/800 2200

600/800/1000/1200mm

Larger than1200mm

100mm(*)

The column is wall standing type what means that it can be installed at the wall, however, it is advised to keep 100 mm distances from

wall, and keep 500mm from the ceiling.

15

Main ComponentsAirCircuitBreakerEntelliguardTM G

AirCircuitBreakerM-Pact

EntelliGuard™ G is a line of three and four pole devices ranging from 400 to

6400A mp in three basic frames with fault interruption ratings of Up to 150kA,

complying with IEC, CCC, ANS and UL standard. A design offering a unique

combination of high fault current withstand ratings, short fault interruption times

and selectivity. EntelliGuard™ G TU trip unit that enables the circuit breaker with

the latest technology for system safety, reliability, measurement, relaying and

communicationsusingtheModbusorProfibusProtocol.

Rated from 400 to 4000A, the M-PACT circuit breaker has been designed to meet

the strictest demands in fault detection and protection. The range has been

developed to be aesthetically and technically co-ordinated with other protective

devices. The breaker range has a common height and depth and is available in

both fixed pattern and drawout versions, which can be manually or electrically

operated.Designedtooffermultiplemainsconnectionoptions,italsocomeswitha

wide range of easy-to-install accessories.

MCCBRecordPlus

Intelligent Motor Protection Relay

Ratedcurrentfrom3to630A,RecordPlusMCCBisdesignedfordistributionand

control system. Three and four poles, fixed, plug-in and withdrawable type are

available,breakingcapacityrangingfrom18to150kA.Thebreakerhasexcellent

current limiting capacity with circle double contact structur. Modularized design,

high reliability.

MM200/300 are digital motor protection and control system, designed for Low

Voltage motor applications. MM200/300 can provide comprehensive protection

function including overload, ground fault, stalled and phase unbalance. The relay

includes high accuracy metering for all AC signals. Current and voltage parameters

are available as total RMS magnitude and angle. MM200/300 utilizes advanced

communications technologies, making it easy and flexible to use and integrate

into new and existing infrastructures. Multiple communication protocols, including

ModbusRTU,ProfibusDP,Devicenet,arecompatible.

16

StandardandCertificates

Type Test:• IEC61439-2Low-voltageswitchgearandcontrolassemblies-Part2:Powerswitchgearandcontrolgearassemblies.

*ThemodifiedandupdatedstandardreleasedbyInternationalelectricalcommitteein2009,basedonIEC60439standard.

Special Test:• IEC60068-2-57Environmenttesting-Part2-57:TestFf:Vibration-Timehistorymethod

*Vibration environment test in horizontal and vertical direction.

• IEC/TR361641:2008-01Enclosed low-voltageswitchgearandcontrolgearassemblies-Guide for testingunder

conditions of arcing due to internal fault

*International arcing fault protection standard.

• IEC60529Degreesofprotectionprovidedbyenclosures

*DefineIPnumbersusedtoquantifythedegreeofprotectionprovidedbyenclosures.

• IEC60068-2-30Definingresistancetodampandheat

*Wet Heat, 6 cycle with 24 h, 400C, 95 % rel. humidity.

• IEC60068-2-11Definingresistancetosaltmist

*Salt fork, 2 cycle with 24 h, 350C.

SEN Plus Complies with Following International Standards:

17

Standard SolutionPowerCenterwithACBEntelliGuardTM G

Rated Current (A) Frame 3 Poles 4 Poles Width

(mm)Depth(mm)

BreakingCapacity/400VAC65kA 80kA 100kA

WithdrawableOneBreaker:Incomer/FeederorBuscoupler

1000 1 500 600/800

600 600/800

1600 1 500 600/800

600 600/800

2000 1 500 600/800

600 600/800

2500 2 600 600/800

800 600/800

3200 2 800 800

800 800

4000 2 1000 800

1000 800

5000 3 1000 1200

1200 1200

6300 3 1000 1200

1200 1200

FixedOneBreaker:Incomer/FeederorBuscoupler

1000 1 400 600/800

600 600/800

1600 1 500 600/800

600 600/800

2000 1 500 600/800

600 600/800

2500 2 600 600/800

800 600/800

3200 2 800 800

800 800

18

Standard SolutionPowerCenterwithACBEntelliGuardTM G

Rated Current (A) Frame 3 Poles 4 Poles Width

(mm)Depth(mm)

BreakingCapacity/400VAC65kA 80kA

WithdrawableTwoBreakers:IncomerPlusBuscoupler1000 1 500 600/800

600 600/8001600 1 500 600/800

600 600/800FixedTwoBreakers:IncomerPlusBuscoupler

1000 1 400 600/800600 600/800

1600 1 500 600/800600 600/800

Fixed/WithdrawableTwoBreakers:TwoFeeders1000 1 600 800

800 8001600 1 600 800

800 8002000 1 800 800

800 8002500 2 800 800

800 800

PowerCenterwithACBM-PactRated Current

(A) Frame 3 Poles 4 Poles Width(mm)

Depth(mm)

BreakingCapacity/400VAC65kA 80kA

WithdrawableOneBreaker:Incomer/FeederOrBuscoupler1000 1 400 600/800

600 600/8001600 1 500 600/800

600 600/8002500 1 600 600/800

600 600/8003200 2 800 800

800 8004000 2 800 800

800 800TwoBreakers:IncomerPlusBuscoupler

1000 1 400 600/800600 600/800

1600 1 500 600/800600 600/800

FixedTwoBreakers:TwoFeeders1000 1 600

800 600/8001600 1 600 600/800

800 600/8002500 1 800 600/800

800 600/800

19

Motor Control Center

Fixed Modules

Feeder (3 Poles) Feeder (4 Poles)

Current (A) Module size (E) Current (A) Module Size (E)

400Vac

160 8 160 8

250 10 250 10

400 10 400 10

630 10 630 10

500Vac

160 8 160 8

250 10 250 10

400 10 400 10

630 10 630 10

690Vac

160 8 160 8

250 10 250 10

400 10 400 10

630 10 630 10

Plug-in Modules

Motor Starter Dol Motor Starter Reverse MotorStarterY/Δ Feeder (3 Poles) Feeder (4 Poles)

Max Load(kW)

Module Size (E)

Max Load(kW)

Module Size (E)

Max Load(kW)

Module Size (E)

Current(A)

Module Size (E)

Current(A)

Module Size (E)

400Vac

30 4 30 4 30 4 63 4 63 8

37 5 55 18 55 24 160 8 160 8

55 10 90 24 90 24 400 10 400 10

220 18 110 30 110 30 630 18 630 18

220 30 200 30

690Vac

11 10 11 10 15 18 63 8 63 8

30 10 30 10 75 24 160 8 160 8

75 18 75 18 132 24 400 24 400 24

132 18 160 24 220 36 630 24 630 24

220 18 250 36 250 36

20

Standard SolutionMotor Control Center

Withdrawable Modules

Motor Starter Dol Motor Starter Reverse MotorStarterY/Δ Feeder (3 Poles) Feeder (4 Poles)

Max Load(kW)

Module Size (E)

Max Load(kW)

Module Size (E)

Max Load(kW)

Module Size (E)

Current(A)

Module Size (E)

Current(A)

Module Size (E)

400Vac

30 5 30 8 30 10 63 5 63 6

37 5 55 30 55 30 160 5 160 6

55 18 90 30 90 30 400 10 400 12

220 24 110 30 110 30 630 10 630 12

220 30 200 36

690Vac

11 12 11 12 15 18 63 5 63 10

30 12 30 12 75 30 160 10 160 10

75 12 75 12 132 30 400 10 400 12

132 18 160 24 220 30 630 10 630 12

220 30 250 36 250 36

21

Primary Scheme

Scheme No 01 02 03 04 05 06

Primary Scheme

Cubical Width (mm) 400 500 600 800 800 1000

Unit Height 80E 80E 80E 80E 80E 80E

Max.Working Current (A) 1000 2000 2500 3200 4000 6300

Main EquipmentMP-800~1000

EntelliGuardTM G -1000

MP-1600EntelliGuardTM G -1000~2000

MP-2500EntelliGuardTM G

-2500

EntelliGuardTM G -3200

MP-3200~4000

EntelliGuardTM G -4000~6300

Application Upper input (output) (three-pole switch)

Scheme No 07 08 09 10 11

Primary Scheme

Cubical Width (mm) 400 600 800 1000 1200

Unit Height 80E 80E 80E 80E 80E

Max. Working

Current (A)800 2500 4000 4000 6300

Main Equipment MP-800

MP-1000~2500EntelliGuardTM G-1000~2000


EntelliGuardTM G-4000

EntelliGuardTM G-5000~6300*

Application Upper input (output) (quadru-pole switch)

22

Primary Scheme

Scheme No 12 13 14 15 16 17

Primary Scheme

Cubical Width (mm) 400 500 600 800 800 1000


Max. Working

Current (A)1000 2000 2500 3200 4000 6300



MP-1600EntelliGuardTM G-1000~2000


-2500


MP-3200~4000

EntelliGuardTM G-4000~6300

Application Lower input (output) (three-pole switch)

Scheme No 18 19 20 21 22

Primary Scheme

Cubical Width (mm) 400 600 800 1000 1200


Max. Working

Current (A)800 2500 4000 4000 6300

Main Equipment MP-800MP-1000~2500EntelliGuardTM G-1000~2000




Application lower input (output) (quadru-pole switch)

23

Scheme No 23 24 25 26 27 28

Primary Scheme

Cubical Width (mm) 400 500 600 800 1000 1000


Max. Working

Current (A)1000 2000 2500 4000 6300 　





-2500

MP-3200~4000EntelliGuardTM G

-3200


Application Busbarcoupling(three-poleswitch) Busbarlifting

Scheme No 29 30 31 32 33

Primary Scheme

Cubical Width (mm) 400 600 800 1000 1200


Max. Working

Current (A)800 2500 4000 4000 6300

Main Equipment MP-800MP-1000~2500EntelliGuardTM G-1000~2000




Application Busbarcoupling(quadru-poleswitch)

24

Scheme No 34 35 36 37 38 39 40 41

Primary Scheme

Cubical Width (mm) 400 500 600 500 600 600 800 800

Unit Height 80E 80E 80E 80E 80E 80E 80E 80E

Max. Working

Current (A)1000 1600 1600 1000 1600 1600 2500 2500

Main EquipmentMP-1000


EntelliGuardTM G-1600 MP-1600 MP-1000





Application IncomerplusBusbarcoupling(three-pole switch)

IncomerplusBusbarcoupling

(quadru-pole switch)

Feeder (Lower or Upper output)(three-pole switch)

Feeder(Lower or Upper output)(quadru-pole

switch)

Scheme No 42 43 44 45 46 47

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200


Max.Working

Current (A)160 630 63 160 400 630

Main EquipmentRecord Plus

FD160Record Plus

FE250　FG400　FG630

Record PlusFD160

Record PlusFD160

Record PlusFG400

Record PlusFG630

Application Fixed Feeder (Lower or Upper output)(three/quadru-pole switch)

Plug-in Feeder (Lower or Upper output)(three-pole switch)

Primary Scheme

25

Scheme No 48 49 50 51 52 53 54

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200

Unit Height 8E 10E 18E 5E 10E 6E 12E

Max. Working

Current (A)160 400 630 160 630 160 630

Main Equipment Record PlusFD160

Record PlusFG400

Record PlusFG630

Record PlusFD160

Record PlusFE250, FG400

FG630

Record PlusFD160

Record PlusFG400FG630

Application Plug-in Feeder (Lower or Upper output)(quadru-pole switch)

Withdrawable Feeder (Lower or Upper output) (three-pole switch)

Withdrawable Feeder (Lower or Upper output)(quadru-pole switch)

Scheme No 55 56 57 58 59 60 61

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200

Unit Height 4E 6E 5E 8E 10E 18E 5E 8E 18E 24E

Max. Control Power

(kw)30 37 55 220 37 75 220

Main EquipmentGPS1BHAE~GPS2BHAUCL00~CL07

FD160~FE160CL08RT2J

FD160~FE160CK85B

RT2L~RT2M

FE160~FG630CK95B~CK10CRT3E~RT5D

GPS1BHAE~GPS2BHAUCL00~CL07

FD160CL08RT2J

FD160~FE160CK85B~CK95BRT2L~RT3E

FE250~FG630CK95B~CK10CRT4N~RT5D

Application Plug-in Motor Direct on line starter with circuit breaker Withdrawble Motor Direct on line starter with circuit breaker

26

Scheme No 62 63 64 65 66 67 68 69

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200 800/1000/1200

Unit Height 6E 8E 12E 18E 24E 6E 8E 8E 10E 12E 24E

Max. Control Power

(kw)30 37 55 132 15 30 37 75


FD160~FE160CL08RT2J

FD160~FE160CK85B

RT2L~RT2M

FE250CK95B~CK10CRT3E~RT4R

GPS1BHAE~GPS2BHARCL00~CL04

GPS1BHAS~GPS2BHAUCL04~CL07

FD160CL07RT2J

FD160~FE160CK85B~CK95BRT2J~RT3E

Application Fixed Motor Direct on line starter with circuit breaker Fixed Motor Direct on line starter with circuit breaker/Reversible

Scheme No 70 71 72 73 74 75 76 77 78

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200

Unit Height 4E 6E 8E 10E 18E 24E 30E 5E 8E 10E 30E

Max. Control Power

(kw)30 37 75 90 220 30 37 220


FD160CL07RT2J

FD160~FE160CK85B~CK95BRT2L~RT3E

FE250CK95BRT4N

FE250~FG630CK10C

RT4R~RT5D

GPS1BHAE~GPS2BHAUCL00~CL07

FD160CL07RT2J

FD160~FG630CK85B~CK10CRT2L~RT5D

Application Plug-in Motor Direct on line starterwith circuit breaker/Reversible

Withdrawable Motor Direct on line starterwith circuit breaker/Reversible

Primary Scheme

27

Scheme No 79 80 81 82 83 84 85 86 87

Primary Scheme

Cubical Width (mm) 800/1000/1200 800/1000/1200

Unit Height 4E 6E 18E 24E 30E 10E 18E 24E 30E 36E

Max. Control Power

(kw)30 37 90 220 30 37 45 132 220


FD160CL07CL04RT4LJ

FD160~FE250CK85B~CK95BCL06~CL07RT4LJ~RT4LM

FE250~FG630CK10C

CK10~CK08CRT5A~RT5B

GPS1MHAN~GPS2MHAUCL25~CL07CL00~CL04RT1N~RT2E

FD160CL07CL04RT4LJ

FD160CK85BCL06RT4LJ

FD160~FE250CK85B~CK10CCL06~CL10RT4LK~RT5A

FG400~FG630CK10C

CK75C~CK08CRT5A~RT5B

Application Plug-in Star-Delta Motor-starter Withdrawable Star-Delta Motor-starterwith circuit breaker

Scheme No 88 89 90 91

Primary Scheme

Cubical Width (mm) 800 1000 800 1000

Unit Height 80E 80E 80E 80E

Max.Compersation

Capacity30x10=300 30x12=360 30x8=240 30x10=300

Main Equipment FG630/3PRT20-100A

FK800/3PRT20-100A

FG400/3PRT20-100A

FG630/3PRT20-100A

Application Reactive power compensation Wave-filtertypereactivepowercompensation p=XL/XC=0.7%

REGIONAL OFFICES

NORTH

BRANCH OFFICES

Gurgaon

GE India Industrial Pvt. Ltd.5th Floor, Building No.7A DLF Cyber City, DLF Phase-IIISector 25 A, GurgaonHaryana – 122002Ph: (0124) 4808000Fax: (0124) 4226911 / 4226912

Chandigarh

GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905

Jaipur

GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012

Lucknow

GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909

SOUTH

Bangalore

GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199

Chennai

GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474

Coimbatore

GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529

WEST

Mumbai

GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611

EAST

Kolkata

GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071

Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552

HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]

Toll Free No:18001024343

Customer Care:[email protected]

g and General Electric are registered trade marks of General Electric Co. USA©

Ahmedabad

GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/65427389Fax: (079) 26460637

Pune

GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Ph: (020) 41266999Fax: (020) 41266109

Cochin

GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400

Hyderabad

GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272

We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.

For any further information, visit us at http://www.geindustrial.com

0112

/CAT

/SEN

PLU

S

SEN Plus Low Voltage Switchgear

Documents

Transcript of SEN Plus Low Voltage Switchgear