Reliable Support and Performance for Medium Voltage

SEMITRANS

® 203.3 kV, 450A / Half-Bridge

We are close to our customerswww.semikron.com/contactshop.semikron.com

SEMIKRON INtERNatIONal GmbHSigmundstrasse 200, 90431 Nuremberg, Germany Phone +49 911 6559 6663 / Fax +49 911 6559 262sales@semikron.com / www.semikron.com

NOTE: All information is based on our present knowledge and is to be used for information purposes only. The specifications of our components may not be considered as an assurance of component characteristics.

11 2

9 08

60

0

5/20

17

MV plug & play driver for up to 3.3kV

- Optimized: multiple gate resistors thanks to the use of software, SoftOff, active and gate clamping

- Safety: overcurrent and short circuit current multistage detection

- Control: real time monitoring of VDC, VDCsat, VGE, Tamb, TNTC, VS, tsw

- Software: diagnosis and fault logger

- Flexible: supports up to 6 parallel devices

Design-in support1MW 3-phase 3.3kV demo system - Testing and qualification

- Driver setup

- Parallel operation verification

450A, 3.3kV standard package

- Robust N-channel F-IGBT with low VCESAT and Eswitch

- Half-bridge (2 in 1)

- Low inductance

- NTC temperature sensor

Medium-voltage standard package

Latest 3.3kV N-channel F-IGBT

Low inductance

Dedicated to application and design-in support

Medium-voltage driver

Demo system for testing and qualification

Key features

SEMITRANS 20 (2 parallel x 3 phase)

GDU control board

AC busbar

DC +/- terminal

heatsinkcapacitor

900A, 3.3kV, 3-phase building block