Seminar Program for Industrial Weighing and Feeding … · INTECONT ® PLUS - Seminar 5 ......

Seminarprogramm BV-P2001 / 0337 SCHENCK PROCESS GmbH, Darmstadt Seite 1

Seminar Program

Basic understanding

Operation and handling

Details of components and functions

Parameterisation and calibration

Identification and removal of error states

Maintenance and repair

For SCHENCK PROCESS GmbH Industrial Weighing and Feeding Systems

BV-D5006 GB

Weighing and Feeding Seminars 0347 BV-D5006GB SCHENCK PROCESS GmbH, Darmstadt Page - I -

Contents

Seminars..................................................................................................................................................1 Objectives.................................................................................................................................................1 Target Groups ..........................................................................................................................................1 Venue .......................................................................................................................................................2 Start ..........................................................................................................................................................2 Prices........................................................................................................................................................2 Booking.....................................................................................................................................................2 Inquiry .......................................................................................................................................................2 Accommodation........................................................................................................................................2 Questions..................................................................................................................................................2

Seminar Overview ..................................................................................................................................3

"Weighing Systems" .................................................................................................................................3 "Feeding Systems" ...................................................................................................................................3 "Automation Systems" ..............................................................................................................................3 "Mechanical Equipment "..........................................................................................................................3 "Customised" ............................................................................................................................................3 "Miscellaneous" ........................................................................................................................................3 "At The Customer's" .................................................................................................................................3

DISOMAT ® B plus - Seminar 1..............................................................................................................4 DISOMAT ® F - Seminar 2........................................................................................................................5 DISOMAT ® T plus - Seminar 3 ................................................................................................................6 DISOCONT ® - Seminar 4 ........................................................................................................................7 INTECONT ® PLUS - Seminar 5 ..............................................................................................................8 PC User Software - Seminar 6 .................................................................................................................9 DISOCONT ® Master - Seminar 7 ..........................................................................................................11 Fieldbus – Test Place - Seminar 8 .........................................................................................................12 Mechanical Systems - Seminar 9...........................................................................................................13

ENTRY FOR SEMINAR .........................................................................................................................14

INQUIRY FOR SEMINAR ......................................................................................................................15

Weighing and Feeding Seminars 0347 BV-D5006GB SCHENCK PROCESS GmbH, Darmstadt Page 1

Seminars For more than 30 years SCHENCK PROCESS has performed client training in the field of industrial weighing, feeding and automation technology.

The training takes place in an environment which is conducive to learning and supported by practice-oriented documents and small groups.

This brochure presents our seminar offer for industrial

weighing, feeding and automation systems.

Our seminars are designed to convey comprehensive basic knowledge and include training documents on the system in question.

Alternating lectures and exercises on the particular system ensure optimal success.

The seminar rooms are equipped so that a weighing electronics with testing device and a set of training documents are available for two participants each.

Our training engineers are experts with longstanding experience in weighing, feeding and automation technology and convey their know-how lively and close to actual practice.

Objectives • Basic understanding of systems • Operation and handling • Assemblies and their functions • Calibration • Recognition of faults • Avoidance of faults • Identification and removal of error messages • Selection of test functions • Preventive maintenance

Target Groups Operators, maintenance and repair men, commissioning and design engineers


Venue • Schenck Process GmbH

Pallaswiesenstraße 100 D-64293 Darmstadt Telefon +49 (0)6151 32 -1216 oder 32-0

• Your way to us: www.schenck-process.de

Start • 9 a.m. Please turn to the receptionist.

Prices • EUR 360.- / day / participant • + V.A.T.

Please understand that a seminar will be held only if at least 3 persons have booked.

Booking • Please use the fax form "ENTRY FOR SEMINAR" attached to this document. • The receipt will be acknowledged immediately.

Inquiry • For questions on system-related seminars or combinations of various components, please use the

fax form "INQUIRY FOR SEMINAR“ attached to this document.

Accommodation • Hotel accommodation can be arranged upon request.

Questions • For more information, please contact Mr Wolfgang Baab:

Phone 06151-32-2770 Fax 06151-32-1688 E-mail [email protected]

http://www.schenck-process.de/


Seminar Overview "Weighing Systems" Seminar 1 DISOMAT ® B plus

Seminar 2 DISOMAT ® F

Seminar 3 DISOMAT ® T plus

DISOMAT ® B * upon request

DISOMAT ® C * upon request

DISOMAT ® S * upon request

"Feeding Systems" Seminar 4 DISOCONT ®

Seminar 5 INTECONT ® PLUS

MULTICONT ® * upon request

"Automation Systems" Seminar 6 PC-Programs DISOWARE

Seminar 7 DISOCONT ® Master

Seminar 8 Fieldbus communication test

"Mechanical Equipment" Seminar 9 Construction of mechanical weighing system

"Customised" To ask us for a customised seminar, please use the INQUIRY FOR SEMINAR form.

The course duration depends on requirements.

"Miscellaneous" For weighing engineers and servicemen who are familiar with weighing technology and have special questions on selected issues, brief training courses can be offered.

Subjects and dates will be agreed in advance (e.g. EDP interfacing, function block linkage, EasyServe)

The course duration (min. 4 hours) depends on the agreed subject.

"At The Customer's" It is understood that the seminars can also take place at your premises.

*upon request = system no longer included in current portfolio


"Weighing Systems"

DISOMAT ® B plus - Seminar 1 Subjects:

System description • Display • Keyboard • Options • Connector assignment

Menu tree

• Parameters • Function blocks • Fixed wirings

- Filling/Discharge scale - Crane scale - Receiving scale - Road weighbridge

• Customised function block linkage

Calibration • Dead load • Span

Data transmission

• EDP • Printer • Secondary display

DISOPLAN

• Parameters • Function blocks

Fieldbus connection to PMS

• Parameters • Data construction

Duration

Standard seminar: two days

All listed subjects will be discussed in detail and practised on the system.

Brief seminar: one day

All listed subjects will be dealt with. Scale-specific settings and parameters are treated at length. There is little time for exercise. ENTRY FOR SEMINAR SEMINAR OVERVIEW


“Weighing Systems"

DISOMAT ® F - Seminar 2 Subjects:

System description • Display • Keyboard • Connector assignment

Menu tree

• Parameters • Functions

Calibration

• Dead load • Span

DISOSOFT

• DISOVIEW • DISOPLAN

All listed subjects will be discussed in detail and practised on system and PC.

Duration: one day

ENTRY FOR SEMINAR SEMINAR OVERVIEW


"Weighing Systems"

DISOMAT ® T plus - Seminar 3 Subjects:

System description • LEDs • Connector assignment

Calibration

• Dead load • Span

DISOPLAN

• Parameters • Limit value monitoring • Single-ingredient feed control


• Parameters • Data construction

All listed subjects will be discussed in detail and practised on PC using DISOPLAN.

Duration: one day



"Feeding Systems"

DISOCONT ® - Seminar 4 We offer seminars for:

4.1 Weighfeeders

4.2 Loss-in-weight feeders

4.3 Solids flow feeders

4.4 Mass flow feeders

4.5 Belt weighers

4.6 Solids flow meters

4.7 Mass flow meters

Subjects: • DISOCONT system construction • Weighing system function • EasyServe program • Parameterisation • Calibration • Service functions • Fieldbus connection

Duration:

Seminars 4.1 to 4.4: two days each

Seminars 4.5 to 4.7: one day each



"Feeding Systems"

INTECONT ® PLUS - Seminar 5 We offer seminars for

5.1 Weighfeeders

5.2 Loss-in-weight feeders

5.3 Solids flow feeders

5.4 Mass flow feeders

5.5 Belt weighers

5.6 Solids flow meters

5.7 Mass flow meters

Subjects:

• INTECONT® PLUS system construction • Weighing system function • EasyServe program • Parameterisation • Calibration • Service functions • Fieldbus connection

Duration:

Seminars 5.1 to 5.4: two days each

Seminars 5.5 to 5.7: one day each



"Automation Systems"

PC User Software - Seminar 6 For the DISOWARE systems (ATLAS, S, TERRA) and LAS (Loading Automation Systems), we offer the following courses:

6.1 for operators • Scale control • Weighing mode • Cashbox • Daily total • User training

6.2 for accountants

• Master data input/update • Pricing algorithms • Invoicing module

6.3 for evaluators

• Use of evaluations • Preparation of new evaluations • Preparation of new graphs • Preparation of new printouts • Data transfer to MS-EXCEL

6.4 for system administrators

• DISOWARE configuration • Backup/archive functions • Data safety / user management • PC remote maintenance • DISOWARE in network

For beginners and advanced students, we additionally offer:

6.5 PC basics • Hardware components • Software components • PC configuration • Diagnosis and troubleshooting


6.6 PC operating systems • Basic construction • Configuration files • Operation • Help programs • Fault treatment

6.7 PC Networks ( WIN NT, NetWare) • Hardware/software components • System characteristics • Configuration • Maintenance and administration

Duration:

for seminars 6.1, 6.2, 6.4, 6.5 and 6.6: one day each

for seminars 6.3 and 6.7: two days each




DISOCONT ® Master - Seminar 7 Introduction

• Terminology • Hardware platforms • Software installation • Cabling

Application Variants

• Group rate control • Related group rate control • Single scale control

Addins

• Formulae • Online trend • Historical trend • Multi-scale on-stream calibration • Batch report

Menu functions

• Settings • Configuration • etc.

Diagnostic and service functions

• Events • Event memory • Diagnoses counter • Fieldbus diagnosis


• Profibus • Modbus • DeviceNet • Data Highway / DF1

Duration: one day




Fieldbus – Test Place - Seminar 8 The fieldbus test place is designed so that the commissioning of a fieldbus data communication can be tested.

Eligible fieldbus systems:

• Profibus • DeviceNet • Modbus • Ethernet

To prepare commissioning, your control unit can be connected to the fieldbus test place.

Alternatively, a local fieldbus specialist can assist you in commissioning at your premises.

Duration: one day



"Mechanical Weighing Equipment"

Mechanical Systems - Seminar 9 These seminars dedicate to the mechanical construction of the selected equipment. We offer seminars for:

9.1 Loss-in-weight feeders MechaTron ®

9.2 Solids flow feeders MULTICOR ®

9.3 Mass flow feeders MULTISTREAM ®

9.4 Belt weighers MULTIBELT ®

9.5 Weighfeeders MULTIDOS ®

The acquired knowledge is deepened by practical exercises (e.g. load cell replacement).

Duration: one day



ENTRY FOR SEMINAR

SCHENCK PROCESS GmbH - FAX an +49 (0)6151 32 1688 Abt. BVET Kundenschulung Pallaswiesenstraße 100 D-64293 Darmstadt

Sender

Company: _____________________________________________________

Name: _____________________________________________________

Dept.: _____________________________________________________

Street:: _____________________________________________________

ZIP, City _____________________________________________________

Telephone: ______________________ Fax: ____________________

Email: ______________________

I would like to book for the following person(s):

Seminar No. _____ Standard / Brief and/or System Seminar

___________________________________________________________ Name ___________________________________________________________ Department Hotel accommodation Yes / No ____________________________________________________________ Name ____________________________________________________________ Department Hotel accommodation Yes / No ____________________________________________________________ Name ____________________________________________________________ Department Hotel accommodation Yes / No

If you book for three or more persons, we will try to hold the seminar on one of the three indicated dates.

1st date __.__.__ or 2nd date __.__.__ or 3rd date __.__.__

___________________ Date and signature


INQUIRY FOR SEMINAR

SCHENCK PROCESS GmbH - FAX an +49 (0)6151 32 1688 Abt. BVET Kundenschulung Pallaswiesenstraße 100 D-64293 Darmstadt

Special seminar (system related) with the following components or seminar combining various components

"Weighing Systems" Special Seminar Weighing electronics

DISOMAT Load cells / Weigh beams

Meas. eye Load cell

mounts

Scale type B plus F T plus RTN VBB DBW DMA VKN VPN Road weighbridge Hopper scale Crane scale Platform cale

Feeding Systems" Special Seminar Weighing electronics Local control unit DISOCONT INTECONT VLG 20100 20110 MechaTron Coni-Flex MechaTron Coni-Steel Belt weighers Weighfeeders MULTICOR MULTISTREAM

"Automation Systems" Special Seminar DISOWARE-S ATLAS TERRA LAS DISOCONT Master Feldbus-Systeme PROFIBUS DP Modbus

Serial number: .........................................................................................................

Comments: .........................................................................................................

Return fax to

Name: ............................................... Tel: ...............................................

Date: ............................................... Fax: ...............................................

Seminar Program for Industrial Weighing and Feeding … · INTECONT ® PLUS - Seminar 5 ......

Documents

Transcript of Seminar Program for Industrial Weighing and Feeding … · INTECONT ® PLUS - Seminar 5 ......