Semiconductor Mounting Clamps Spare Parts Information · mm mm kg kN kV kV °C 5SAC 14V2010 - 140...
Transcript of Semiconductor Mounting Clamps Spare Parts Information · mm mm kg kN kV kV °C 5SAC 14V2010 - 140...
-
Semiconductor Mounting ClampsSpare Parts Information
-
2 Semiconductor Mounting Clamps | Catalogue
Mounting ClampsSelection Guide
Product Range Overview - Selection Guide
3BS
E05
4278
©A
pr.2
008
by A
BB
Recom
mended
for Device
Flange Diam
eter
Bolt distance
Alum
inium
Steel
mm mm 4kN
8kN
10kN
11kN
12kN
15kN
16kN
20kN
22kN
33kN
40kN
50kN
70kN
90kN
135kN
5SAC22V 150 - 172 220 A 5SAC18V 60 - 150 180 A 5SAC15V 75 - 120 146 A 5SAC14V 60 - 110 140 A 5SAC13V 40 - 118 132 S 5SAC10V 60 - 75 102 A 5SAC10V 42 - 75 102 S 5SAC09V 60 85 S 5SAC07V 60 70 S
Mounting Clamp Type
Clamping Force
Please find in the right column a quick guide explaining the composition of the standard ABB part numbers for mounting clamps. An example of adapted standard part number is 5SAC 1890V0001, where the number ‘90‘ has changed place when compared to the standard part number.
Standard part number 5SAC 18V9002
5S Original drawing responsible, CHSEM A Acessories C Clamp 18 approximately 18 cm bolt distance V Mechanical version 90 90 kN of spring force 02 Version number
-
Semiconductor Mounting Clamps | Catalogue 3
Aluminium Mounting Clamp5SAC22V
90, 135 kN
Clamping system for hockey-puck devices with flange diameter 150 mm and 172 mm clamping force 90 and 135 kN
Length Distance
mm mm kg kN kV kV °C 5SAC 22V9011 - 220 2.60 90 - - 80 1 5SAC 22V1311 - 220 3.50 135 - - 80 2
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partial discharge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force up to 135 kNABB’s patented correct clamping force indicator
Fig. 1 5SAC22V9011Each part number includes:1. Leaf spring with correct clamping force
indicator and pressure pad.2. Nuts3. Washers
Fig. 2 5SAC22V1311Each part number includes:1. Leaf spring with correct clamping force
indicator and pressure pad.2. Nuts3. Washers
[mm] [mm]
© Copyright ABB. All rights reserved.
clamping force 90, 110 and 135 kn (-10% +20%)
(-10% +20%)
90, 110, 135kN
5SAC22V1311, 5SAC22V1111
-
4 Semiconductor Mounting Clamps | Catalogue
Product specifications
Leaf springMaterial: Aluminium EN-AW-7020Surface treatment: Anodized nature (20µm)
Indicating springMaterial: EN-AW-6082Surface treatment: Anodized nature (10µm)
Press pieceMaterial: Aluminium EN-AW-6082Surface treatment: Anodized nature (20µm)
NutsMaterial: SS 1957-04Surface treatment: Fe/Zn 12c2
WashersMaterial: SS 1914-04Surface treatment: Fe/Zn 12c2
Fig. 3 Nut Fig. 4 Washer
3BS
E04
9977
©N
ov.2
007
by A
BB
[mm] [mm]
6082 T610
10
6005 T6
6082 T6
-
Semiconductor Mounting Clamps | Catalogue 5
Aluminium Mounting Clamp5SAC18V
50, 70, 90 kN
Clamping system for hockey-puck devices with flange diameter 100 to 150 mm, mounting force 50 - 90 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 18V5010 - 180 0.85 50 - - 80 1 5SAC 18V7010 - 180 0.85 70 - - 80 1 5SAC 18V9010 - 180 0.85 90 - - 80 1 5SAC 18V5001 - 180 0.97 50 7.0 > 7.0 80 2 5SAC 18V7001 - 180 0.97 70 7.0 > 7.0 80 2 5SAC 18V9001 - 180 0.97 90 7.0 > 7.0 80 2 5SAC 18V5002 - 180 1.15 50 7.0 > 7.0 80 3 5SAC 18V7002 - 180 1.15 70 7.0 > 7.0 80 3 5SAC 18V9002 - 180 1.15 90 7.0 > 7.0 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 50, 70 and 90 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 18V50105SAC 18V70105SAC 18V9010
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
-
6 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2295
©N
ov.2
007
by A
BB
Fig. 25SAC 18V50015SAC 18V70015SAC 18V9001
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator
Fig. 35SAC 18V50025SAC 18V70025SAC 18V9002
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M16 property class 8.8 (DIN 931) - Plain washer 17 x 45 x 3 Fig. 3 Disc washer 17 x 29 x 4 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 7
Aluminium Mounting Clamp5SAC18V
11, 15, 20, 40 kN
Clamping system for hockey-puck devices with flange diameter up to 150 mm, mounting force 11 - 40 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 18V1110 - 180 0.44 11 - - 80 1 5SAC 18V1510 - 180 0.44 15 - - 80 1 5SAC 18V2010 - 180 0.44 20 - - 80 1 5SAC 18V4010 - 180 0.44 40 - - 80 1Insulators2744010-3 - - 0.11 7.0 > 7.0 80 25FSE704857V1001 - - 0.11 7.0 > 7.0 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 11, 15, 20 and 40 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 18V11105SAC 18V15105SAC 18V20105SAC 18V4010
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
-
8 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2296
©N
ov.2
007
by A
BB
Fig. 22744010-3Pressure pad insulator
Fig. 35FSE704857V1001Pressure pad insulator
Dimensionsmm
Bolt (11 - 20 kN) M10 property class 8.8 (DIN 931) - Bolt (40 kN) M10 property class 10.9 (DIN 931) - Plain washer 10.5 x 25 x 2 - Disc washer 10.5 x 23 x 2.5 (DIN 6796) -
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 9
Aluminium Mounting Clamp5SAC15V
20 .. 70 kN
Clamping system for hockey-puck devices with flange diameter up to 120 mm, mounting force 20 - 70 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 15V2010 - 146 0.57 20 - - 80 1 5SAC 15V3310 - 146 0.57 33 - - 80 1 5SAC 15V4010 - 146 0.57 40 - - 80 1 5SAC 15V5010 - 146 0.57 50 - - 80 1 5SAC 15V7010 - 146 0.57 70 - - 80 1 5SAC 15V2001 - 146 0.69 20 7.0 > 7.0 80 2 5SAC 15V3301 - 146 0.69 33 7.0 > 7.0 80 2 5SAC 15V4001 - 146 0.69 40 7.0 > 7.0 80 2 5SAC 15V5001 - 146 0.69 50 7.0 > 7.0 80 2 5SAC 15V7001 - 146 0.69 70 7.0 > 7.0 80 2 5SAC 15V2002 - 146 0.81 20 7.0 > 7.0 80 3 5SAC 15V3302 - 146 0.81 33 7.0 > 7.0 80 3 5SAC 15V4002 - 146 0.81 40 7.0 > 7.0 80 3 5SAC 15V5002 - 146 0.81 50 7.0 > 7.0 80 3 5SAC 15V7002 - 146 0.81 70 7.0 > 7.0 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 20 .. 70 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 15V20105SAC 15V33105SAC 15V40105SAC 15V50105SAC 15V7010
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
-
10 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2788
©N
ov.2
007
by A
BB
Fig. 25SAC 15V20015SAC 15V33015SAC 15V40015SAC 15V50015SAC 15V7001
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator
Fig. 35SAC 15V20025SAC 15V33025SAC 15V40025SAC 15V50025SAC 15V7002
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M12 property class 8.8 (DIN 931) - Plain washer 13 x 34 x 3 Fig. 3 Disc washer 13 x 29 x 3 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 11
Aluminium Mounting Clamp5SAC14V33
33 kN
Clamping system for hockey-puck devices with flange diameter up to 110 mm, mounting force 33 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 14V3310 - 140 0.53 33 - - 80 1 5SAC 14V3300 - 140 0.63 33 - - 80 2 5SAC 14V3301 140 140 0.85 33 4.8 > 4.8 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 33 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 14V3310
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad
[mm]
-
12 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2791
©N
ov.2
007
by A
BB
Fig. 25SAC 14V3300
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad.2. Pressure pad insulator
Fig. 35SAC 14V3301
Each part number includes:1. Leaf spring with clamping force indicator
and pressure pad2. Pressure pad insulator3. Bolts4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M10 property class 8.8 (DIN 931) - Plain washer 10.5 x 25 x 2 Fig. 3 Disc washer 10.5 x 23 x 2.5 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 13
Aluminium Mounting Clamp5SAC14V20
20 kN
Clamping system for hockey-puck devices with flange diameter up to 110 mm, mounting force 20 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 14V2010 - 140 0.34 20 - - 80 1 5SAC 14V2000 - 140 0.38 20 - - 80 2 5SAC 14V2001 140 140 0.60 20 4.8 > 4.8 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 20 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 14V2010
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad
[mm]
-
14 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2789
©N
ov.2
007
by A
BB
Fig. 25SAC 14V2000
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad.2. Pressure pad insulator
Fig. 35SAC 14V2001
Each part number includes:1. Leaf spring with clamping force indicator
and pressure pad2. Pressure pad insulator3. Bolts4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M10 property class 8.8 (DIN 931) - Plain washer 10.5 x 25 x 2 Fig. 3 Disc washer 10.5 x 23 x 2.5 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 15
Aluminium Mounting Clamp5SAC14V10
10 kN
Clamping system for hockey-puck devices with flange diameter up to 110 mm, mounting force 10 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 14V1010 - 140 0.31 10 - - 80 1 5SAC 14V1000 - 140 0.35 10 - - 80 2 5SAC 14V1001 140 140 0.57 10 4.8 > 4.8 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 10 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 14V1010
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad
[mm]
-
16 Semiconductor Mounting Clamps | Catalogue
3BS
E05
2792
©N
ov.2
007
by A
BB
Fig. 25SAC 14V1000
Each part number includes:1.Leaf spring with clamping force indicator
and pressure pad.2. Pressure pad insulator
Fig. 35SAC 14V1001
Each part number includes:1. Leaf spring with clamping force indicator
and pressure pad2. Pressure pad insulator3. Bolts4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M10 property class 8.8 (DIN 931) - Plain washer 10.5 x 25 x 2 Fig. 3 Disc washer 10.5 x 23 x 2.5 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
Semiconductor Mounting Clamps | Catalogue 17
Steel Mounting Clamp5SAC13V5000
40, 50 kN
Clamping system for hockey-puck devices with flange diameter 100 to 120 mm, mounting force 40 and 50 kN
Designed for the ABB Air Cooled Heat sink 5SAA21V3500 (YAP8-03)
Length Distance
mm mm kg kN kV kV °C
5SAC13V5000 - 132 1.8 40, 50 5.4 > 5.4 125 1
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Corrosion resistantClamping force 40 and 50 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 13V5000
Each part number includes:1. Leaf spring2. Clamping force indicator3. Yoke4. Insulator5. Bolts (M10x140)6. Spring washers
3BS
E05
2297
©N
ov.2
007
by A
BB
Dimensionsmm
Bolt M10 property class 10.9 (DIN 931) Fig. 1 Spring washer 10.5 x 23 x 2.5 Fig. 1
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
-
18 Semiconductor Mounting Clamps | Catalogue
Aluminium Mounting Clamp5SAC10V22
22 kN
Clamping system for hockey-puck devices with flange diameter up to 75 mm, mounting force 22 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 10V2210 - 102 0.20 22 - - 80 1 5SAC 10V2200 - 102 0.21 22 4.8 > 4.8 80 2 5SAC 10V2201 - 102 0.32 22 4.8 > 4.8 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 22 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 10V2210
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
-
Semiconductor Mounting Clamps | Catalogue 19
3BS
E05
2793
©N
ov.2
007
by A
BB
Fig. 25SAC 10V2200
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator
Fig. 35SAC 10V2201
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator4. Bolts (M8x100)5. Bolt insulators6. Plain washers7. Disc washers
Dimensionsmm
Bolt M8 property class 8.8 (DIN 931) Fig. 3 Plain washer 8.4 x 20 x 2 Fig. 3 Disc washer 8.4 x 18 x 2 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
20 Semiconductor Mounting Clamps | Catalogue
Steel Mounting Clamp5SAC10V16
4, 8, 12 & 16 kN
Clamping system for hockey-puck devices with flange diameter up to 75 mm, mounting force 4 - 16 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 10V1610 - 102 0.09 4,8,12,16 - - 80 15SAC 10V1600 110 102 0.40 4,8,12,16 6.5 > 6.5 80 25SAC 10V1601 120 102 0.40 4,8,12,16 6.5 > 6.5 80 2
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Corrosion resistantClamping force 4, 8, 12, 16 kN (-10%, +20%)ABB’s patented correct clamping force indicator
[mm]
Fig. 15SAC 10V1610
Each part number includes:1. Leaf spring2. Clamping force indicator
-
Semiconductor Mounting Clamps | Catalogue 21
3BS
E05
2800
©N
ov.2
007
by A
BB
Fig. 25SAC 10V16005SAC 10V1601
Each part number includes:1. Leaf spring2. Clamping force indicator3. Bolts and nuts4. Bolt insulators5. Plain washers6. Disc washers
Dimensionsmm
Bolt M8 property class 8.8 (DIN 931) Fig. 2 Plain washer 8.4 x 20 x 2 Fig. 2 Disc washer 8.4 x 18 x 2 (DIN 6796) Fig. 2
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
-
22 Semiconductor Mounting Clamps | Catalogue
Aluminium Mounting Clamp5SAC10V10
10 kN
Clamping system for hockey-puck devices with flange diameter up to 75 mm, mounting force 10 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 10V1010 - 102 0.12 10 - - 80 1 5SAC 10V1000 - 102 0.13 10 4.8 > 4.8 80 2 5SAC 10V1001 100 102 0.24 10 4.8 > 4.8 80 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Not sensitive to magnetic fieldsLow weightHigh alloy content makes clamp exceptionally strongClamping force 10 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 15SAC 10V1010
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
-
Semiconductor Mounting Clamps | Catalogue 23
3BS
E05
2298
©N
ov.2
007
by A
BB
Fig. 25SAC 10V1000
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator
Fig. 35SAC 10V1001
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator4. Bolts (M8x100)5. Bolt insulators6. Plain washers7. Disc washers
Dimensionsmm
Bolt M8 property class 8.8 (DIN 931) Fig. 3 Plain washer 8.4 x 20 x 2 Fig. 3 Disc washer 8.4 x 18 x 2 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coatedor
stainless steel
Recommendations for piece parts:
[mm]
[mm]
-
24 Semiconductor Mounting Clamps | Catalogue
Steel Mounting Clamp5SAC09V12
12 kN
Clamping system for hockey-puck devices with flange diameter up to 60 mm, mounting force 12 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 09V1210 - 85 0.15 12 - - 125 1 5SAC 09V1200 - 85 0.19 12 4.8 > 4.8 125 2 5SAC 09V1201 100 85 0.29 12 4.8 > 4.8 125 3
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Corrosion resistantClamping force 12 kN (-10%, +20%)ABB’s patented correct clamping force indicator
[mm]
Fig. 15SAC 09V1210
Each part number includes:1. Leaf spring with clamping force indicator
-
Semiconductor Mounting Clamps | Catalogue 25
3BS
E05
3762
©M
ar.2
008
by A
BB
Fig. 25SAC 09V1200
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator
Fig. 35SAC 09V1201
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad3. Pressure pad insulator4. Bolts (M8x100mm)5. Bolt insulators6. Disc washers
Dimensionsmm
Bolt M8 property class 8.8 (DIN 931) Fig. 3Disc washer 8.4 x 18 x 2 (DIN 6796) Fig. 3
Piece part Material Included inproducts
Coated orstainless steel
Recommendations for piece parts:
[mm]
[mm]
-
26 Semiconductor Mounting Clamps | Catalogue
Steel Mounting Clamp5SAC07V08
8 kN
Clamping system for hockey-puck devices with flange diameter up to 60 mm, mounting force 8 kN
Length Distance
mm mm kg kN kV kV °C
5SAC 07V0810 - 70 0.13 8 - - 125 1 5SAC 07V0800 - 70 0.27 8 - - 125 2 5SAC 07V0802 100 70 0.26 8 2.8 > 2.8 110 3 5SAC 07V0803 70 70 0.36 8 2.8 > 2.8 110 4
TmMax. temp.
for continuous operation
Fig.Type andOrdering number
Weight FmClamping force
Bolt VcMax. isolation
voltage
VmVoltage for
partialdischarge
Features:Corrosion resistantClamping force 8 kN (-10%, +20%)ABB’s patented correct clamping force indicator
Fig. 25SAC 07V0800
Each part number includes:1. Leaf spring with clamping force indicator2. Pressure pad
[mm]
Fig. 15SAC 07V0810
Each part number includes:1. Leaf spring with clamping force indicator2. Washers
[mm]
-
Semiconductor Mounting Clamps | Catalogue 27
3BS
E05
3741
©M
ar.2
008
by A
BB
Fig. 35SAC 07V0802
Each part number includes:1. Leaf spring with clamping force indicator2. Bolts (M8x100mm)3. Bolt insulators4. Washers
Fig. 45SAC 07V0803
Each part number includes:1. Leaf spring with clamping force indicator2. Bolts (M8x70mm)3. Bolt insulators4. Washers
Dimensionsmm
Bolt M8 property class 8.8 (DIN 931) Fig. 3 & 4
Piece part Material Included inproducts
Coated orstainless steel
Recommendations for piece parts:
[mm]
[mm]
-
28 Semiconductor Mounting Clamps | Catalogue
Aluminium Reaction Bar5FSE704857-801
Designed for stack assembliesMaterial: Aluminium alloy EN-AW-6082Surface treatment: Anodized nature (20µm)
3BS
E05
2293
©N
ov.2
007
by A
BB
Features:Not sensitive to magnetic fieldsLow weight
[mm]
-
Semiconductor Mounting Clamps | Catalogue 29
Aluminium Reaction Bar5FSE704857-802
Designed for stack assembliesMaterial: Aluminium alloy EN-AW-6082
Logistics �enterS-721 59 Västerås, SwedenTel: +46 21 32 28 00, Fax: +46 21 14 65 37Emergency Spare Parts: +46 70 575 00 85
��� ��
Parts OnLine: www.abb.com/partsonlineOffers: [email protected]: [email protected] 5
FSE7
0485
7-80
2 ©
Nov
.200
8 by
ABB
Features:Not sensitive to magnetic fieldsLow weight
[mm]
40 40
2060 14
6
180
M12
-
30 Semiconductor Mounting Clamps | Catalogue
Aluminium Reaction BarYK 2172 001-1
Designed for stack assembliesMaterial: Aluminium alloy EN-AW-6082
3BS
E05
2293
©N
ov.2
007
by A
BB
Features:Not sensitive to magnetic fieldsLow weight
[mm]
-
Semiconductor Mounting Clamps | Catalogue 31
Pressure Pad Insulator5FSE704857V1001
Pressure Pad Insulator
Specifications:Material: Ultrason E2010 G6Vc 7.0 kV Max. isolation voltageVm 7.0 kV Voltage for partial dischargeTm 80 °C Max temp. for cont. operation
3BS
E05
2294
©N
ov.2
007
by A
BB
[mm]
-
32 Semiconductor Mounting Clamps | Catalogue
Air Cooled Heat sink5SAA21V9000, 5SAA21V8500
Type YAP 3-05
Air cooled heat sink for double sided cooling of disc housing thyristors and diodes, diameter 40 - 75 mm.
mm kg K/kW dm3/s mm* K/kW W mm*
5SAA21V9000 19 3.7 90 100 19 510 150 19 5SAC10V1600
5SAA21V8500 50 3.6 85 100 47 485 150 47 5SAC10V1600
Part number Maxcontact
diameter
Weight Recommendedmounting clamp
RthHA at power dissipation measured with specified device
contact diameter
RthHA at air flowmeasured with
specified device contact diameterForced air cooling Convective air cooling
[mm]
Specific heat: 960 J
-
Semiconductor Mounting Clamps | Catalogue 33
3BS
E05
0731
©N
ov.2
007
by A
BB
Fig. 1 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 19 mm
Fig. 3 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 47 mm
Fig. 5 Convection cooling. Transient thermal imperdanceZ(th)t. Case to ambient air. Power loss 150 W.
Fig. 4 Thermal resistance Rthca. Case to ambient air and static pressure drop vs flow of cooling air.
Fig. 2 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 34 mm
-
34 Semiconductor Mounting Clamps | Catalogue
Air Cooled Heat sink5SAA15V9000, 5SAA15V8500
Type YAP 6-01
Air cooled heat sink for double sided cooling of disc housing thyristors and diodes, diameter 40 - 75 mm.
mm kg K/kW dm3/s mm* K/kW W mm*
5SAA15V9000 19 3.4 90 100 19 510 150 19 5SAC10V1600
5SAA15V8500 50 3.3 85 100 47 485 150 47 5SAC10V1600
Part number Maxcontact
diameter
Weight Recommendedmounting clamp
RthHA at power dissipation measured with specified device
contact diameter
RthHA at air flowmeasured with
specified device contact diameterForced air cooling Convective air cooling
[mm]
Specific heat: 960 J
-
Semiconductor Mounting Clamps | Catalogue 35
3BS
E05
0732
©N
ov.2
007
by A
BB
Fig. 1 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 19 mm
Fig. 3 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 47 mm
Fig. 5 Convection cooling. Transient thermal imperdanceZ(th)t. Case to ambient air. Power loss 150 W.
Fig. 4 Thermal resistance Rthca. Case to ambient air and static pressure drop vs flow of cooling air.
Fig. 2 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 34 mm
-
36 Semiconductor Mounting Clamps | Catalogue
Air Cooled Heat sink5SAA21V4500
Type YAP 8-02
Air cooled heat sink for double sided cooling of disc housing thyristors and diodes, diameter 75 mm.
mm kg K/kW dm3/s mm* K/kW W mm*
5SAA21V4500 50 8.2 45 300 47 240 300 47 5SAC10V1601
Part number Maxcontact
diameter
Weight Recommendedmounting clamp
RthHA at power dissipation measured with specified device
contact diameter
RthHA at air flowmeasured with
specified device contact diameterForced air cooling Convective air cooling
[mm]
Specific heat: 960 JCooling surface 1.4 m2
-
Semiconductor Mounting Clamps | Catalogue 37
3BS
E05
0733
©N
ov.2
007
by A
BB
Fig. 1 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 47 mm.
Fig. 3 Thermal resistance Rthca. Case to ambient air and static pressure drop vs flow of cooling air. Pole piece Ø 47 mm.
Fig. 2 Convection cooling. Transient thermal imperdanceZ(th)t. Case to ambient air for different power losses. Pole piece 47 mm.
-
38 Semiconductor Mounting Clamps | Catalogue
Air Cooled Heat sink5SAA21V3500
Type YAP 8-03
Air cooled heat sink for double sided cooling of disc housing thyristors and diodes, diameter 100 - 110 mm.
mm kg K/kW dm3/s mm* K/kW W mm*
5SAA21V3500 80 8.2 35 300 78 230 300 78 5SAC13V5000
Part number Maxcontact
diameter
Weight Recommendedmounting clamp
RthHA at power dissipation measured with specified device
contact diameter
RthHA at air flowmeasured with
specified device contact diameterForced air cooling Convective air cooling
[mm]
Specific heat: 960 JCooling surface 1.4 m2
-
Semiconductor Mounting Clamps | Catalogue 39
3BS
E05
0734
©N
ov.2
007
by A
BB
Fig. 1 Transient thermal imperdance, Z(th)t. Case to ambient air at different air-flow rates. Pole piece Ø 78 mm.
Fig. 3 Thermal resistance Rthca. Case to ambient air and static pressure drop vs flow of cooling air. Pole piece Ø 78 mm.
Fig. 2 Convection cooling. Transient thermal imperdanceZ(th)t. Case to ambient air for different power losses. Pole piece 78 mm.
-
40 Semiconductor Mounting Clamps | Catalogue
Cleaning Kit
Silicon Oil
Part Number Description Contents
5FSE70 4857-1 Complete cleaning kit for preparation of semicon-ductor and heatsink contact surfaces before assembly
25 ml Silicon Oil 200 ml Cleaning solvent 1 pc Abrasive cloth 10 pcs Lintfree paper
5FSE70 4857-A Kit for preparation of semiconductor and heatsink contact surfaces before assembly. For export rea-sons the cleaning solvent is not included.
25 ml Silicon Oil 1 pc Abrasive cloth 10 pcs Lintfree paper
5FSE70 4857-26 Silicon oil 25 ml
5FSE70 4857-28 Silicon oil 250 ml
-
Semiconductor Mounting Clamps | Catalogue 41
Thyristor TesterYSP 50-01
The Thyristor Tester type YSP 50-01 meets the need for a compact, portable and low weight tool for test of thyristors and diodes
Part number Description Type Weight Test VoltageVDRM, VRRM
Supply Voltage
5FSE 704857-5 Thyristor Tester YSP 50-01 14.5 kg up to 5 kV 220V / 50Hz
5FSE 704857-6 Thyristor Tester YSP 50-01 14.5 kg up to 5 kV 110V / 60Hz
5FSE 704857-7 Test fixture YSP 40-01 4.4 kg
Features:Test Voltages: VDRM and VRRM up to 5000 VTest of Triggering data
3BS
E05
4136
©A
pr.2
008
by A
BB
-
Contact us
3BS
E05
4408
rev
A,
Väst
erås
200
9-04ABB AB
Logistics CenterTvärleden 2 S-721 59 Västerås, Sweden Phone: +46 (0) 21 32 50 00 Fax: +46 (0) 21 14 65 37 E-Mail: [email protected] www.abb.comwww.abb.com/partsonline