Self Guided Tour of TagMate™QCSelf Guided Tour of TagMate™QC

Display Tag DATA

Tag Data: PRINT

TagMate™QC SETUP

Display STATS

Tags: START and READ

SEND All Data to PC

Additional Capabilities

®

V 3.2

Click here to turn on the TagMate™QC

Turning on the TagMate™QC

This is what the screen looks like just after pressing the ON button

After turning on TagMate™QC, this will be the default screen displayed

Main Menu

Click on SELECT to review DATA – goes directly to most recent tag data in the sequence

DATA Selected

Main TagMate™QC Menu: DATA

Click here to READ a tag (active on all DATA Screens)

Click here to SEND all data records to PC computer by IR link

Click on Arrows ( or ) for SETUP or STATS

After turning on TagMate™QC, the DATA mode is automatically selected first

Main Menu

DATA Selected

For selected tags, displays tag number, ON/OFF status, current temperature, number of data points, and number of active alarms

Data Screen 1

Temperature when tag was READ

Main Menu

DATA Selected

For selected tags, displays tag number, ON/OFF status, current temperature, number of data points, and number of active alarms

Data Screen 1

Temperature when tag was READ

Main Menu

Displays which alarms are active

Active alarm type will blink on screen (Tmax in this example)

Data Screen 2

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

DATA Selected

Main Menu

Displays the contents of the Info Field

Data Screen 3

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Displays remaining shelf life in days and compares to Setting

Flashes if shelf life is less than Setting

(example shown here)

Shelf Life Screen (Option)

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Compares actual measured Tmax with pre-set Tmax setting

Alarm value will blink

(example shown here)

Data Screen 4

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Displays Time Over Temperature time value and compares it with the alarm setting

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main MenuData Screen 5

Compares actual measured Tmin with pre-set Tmin setting

Alarm value will blink

Data Screen 6

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Displays Time Under Temperature time value and compares it with the alarm setting

Data Screen 7

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Compares actual measured Tavg* with pre-set Tavg* setting

Alarm value will blink

Data Screen 8

*If MKT was selected, MKT values are displayed in this screen

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Compares actual measured Tavg* with pre-set Tavg* setting

Alarm value will blink

Data Screen 9

* If MKT was selected, MKT values are displayed in this screen

DATA Selected

Click on SELECT to view next DATA screen

Click on Arrows ( or )

to go to other tag data records

Click to PRINT a chart using MP-1 printer

Main Menu

Displays Start Date and Start Time for the selected tag

Data Screen 10

DATA Selected

Click on SELECT to view next DATA screen

Click to PRINT a chart using MP-1 printer

Click on Arrows ( or )

to go to other tag data records

Main Menu

Second: Click on SELECT to review STATS – shows information on number of tags stored, etc.

Main TagMate™QC Menu: STATS

First: Click on Arrows ( or ) for SETUP, DATA or STATS

STATS Selected

Main Menu

Click on SELECT to view next STATS screen

STATS Selected

Displays the number of tag records stored in TagMate™QC memory and how many of these records have alarms

Stats Screen 1Main Menu

Click on SELECT to view next STATS screen

Displays Firmware Version number

This screen is only used for reference in issues involving TurboTag™ Technical Support.

Stats Screen 2

STATS Selected

Main Menu

Click on SELECT to view next STATS screen

Permits all tag records to be erased from TagMate™QC memory

Stats Screen 3

STATS Selected

Main Menu

Click on SELECT to review SETUP parameters – to control the way TagMate™QC displays data

SETUP Selected

Click on Arrows ( or ) for SETUP, DATA or STATS

Main TagMate™QC Menu: SETUPMain Menu

Click on SELECT to view next SETUP screen

Displays time zone relative to GMT

This can be reset using the Arrow ( or ) buttons for higher or lower GMT

Setup Screen 1

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays Daylight Savings ON/OFF status

This can be reset using the Arrow ( or ) buttons for ON/OFF

Setup Screen 2

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays temperature units status °C or °F

This can be reset using the Arrow ( or ) buttons for switching units

Setup Screen 3

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays ON/OFF status for automatic tag stopping

This can be switched using the Arrow ( or ) buttons for ON/OFF

Setup Screen 4

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays averaging function that is active

This can be switched using the Arrow ( or ) buttons for simple mean or MKT

Setup Screen 5

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays status of shelf life function

This can be switched using the Arrow ( or ) buttons for YES/NO

Setup Screen 6

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays alarm level for the shelf life parameter

This value can be set up and down using the Arrow ( or ) buttons

Setup Screen 7

SETUP Selected

Main Menu

Click on SELECT to view next SETUP screen

Displays ON/OFF status for sound signals

This can be switched using the Arrow ( or ) buttons for ON/OFF

Setup Screen 8

SETUP Selected

Main Menu

Press SEND button

The tag to be printed must be displayed on the screen.

How to PrintPrint a Charta ChartMain Menu

• Info Field

• Max & Min Alarms

• Time over Maximum

• Time under Minimum

• Average Temp (MKT)

• Start Time

• Full Graph

• Unique Session ID

How toHow to PrintPrint a Charta ChartMain Menu

PC IR Port

• Press SEND button

• TagMate™QC Screen indicates connection

• Software confirms data capture

• All data is then erased in TagMate™QC

Sending Data with TagMate™QC

TagMate™QC must be in “Main Menu” mode to SEND tag data and software must be in “IR Receive” mode

Main Menu

Press START button

Tag StartingStarting with TagMate™QC

TagMate™QC must have an internal dip switch set to START mode to act as a starter

Main Menu

Press READ button

Second long tone indicates alarm

Tag ReadingReading with TagMate™QC

TagMate™QC must be in “Main Menu” mode to READ a tag

Main Menu

Additional Capabilities and Options

A special fifth Carryover Mode can be used to concatenate monitoring sessions, with of current shelf life as initial shelf life.

• Shelf life calculation mode has three states: Never/Always/If Logging..Alarm Parameters Tmax Overshoot and Hrs Over and Hrs Under are displayed.• Implementation of battery and line power options with auto detect and dynamic ..switching.

TagMate™QC Operates in 4 Modes settable by customer-accessible dip switches*:

Read Only Read & Stop Start Only Configure & Start

In Configure & Start Mode, the configuration used is stored on the TagMate™. It is updated by reading a setup tag made in Session Manager™ software.

Main Menu

* Or optionally by “scan cards” included with the product