Security Systems BU Communication SystemsDCN ST/SEU-CO 1 DCN MPCC IO ASM ServerPC 09.12.2004...

Security Systems BU Communication Systems

DCN MPCC IO ASM ServerPC

09.12.2004 DCNDCN ST/SEU-CO 1

Installing and Operating with Multi PC Control




Installing Application Software Modules from CD-ROM / select LBB 3590.exe




Init Setup




Welcome to The DCN Setup Program




Destination path for DCN applications

Important: On the Server PC the DCN Software must be installedon the same drive as Windows is installed!




Destination path for DCN database




Connection to CCU via Serial Port of PC




Select unit LCD type

If Alphanumeric LCD or Cyrillic alphanumeric LCD and Graphic LCD ischosen only default alphanumeric characters available for Graphic LCD




Select PC Operating Language




LBB 3590 Diskette 2




Select Unit Languages




Multi PC configuration

Remark: This message is only coming when there is a Network card installed !




Multi PC Configuration programStep – 1 Default setting of the Server-PC




Multi PC Configuration program Step–2 on the Server-PC select Multi PC Server




Multi PC Configuration program Step–3 on the Server-PC activate Share...




Multi PC Configuration programStep–4 on the Server-PC Start Explorer




Multi PC Configuration programStep–5 on the Server-PC select Drive C\DCN




Multi PC Configuration programStep–6 on the Server-PC activate Sharing




Multi PC Configuration programStep–7 on Server-PC Select settings Sharing




Multi PC Configuration programStep–8 on Server-PC Select settings Permissions




Multi PC Configuration program Step–9 on the Server-PC Check Sharing




Multi PC Configuration program Step–10 on Server-PC activate Check name




Multi PC Configuration program Step–11 on the Server-PC activate OK




Select applications




Select the applications to be installed




Install application




DCN Setup Message




Digital Congress Network group




Downloading CCU.omf file into the CCU




End of download




Server-PC / activate The DCN




Only available if the CCU is active!

Bosch DCN Startup




Bosch DCN Startup

After an Installation File created




Select Global Settings




Select Global Settings / Multi PC Settings




Multi PC Application Configuration




DCN Application Software Modules in a Multi PC Control System

For the functionality with A.S.M. in a Multi PC System click on this link.

If you need more information about working with the A.S.M. please click on this link.




Activate MultiPC Configuration




Change Multi PC Server to a Single PC System




Server-PC / activate The DCN




Important information about MPC Settings are stored in the:

DCN.ini file in the Windows directory on the Server-PC DCNMPC.ini in the DCN directory on the Server - PC




DCN.ini file in the Windows directory onthe Server-PC[SetUp]SYSPATH=C:\DCN\DBDPATH=\\SERVER\C-DCN\DCN\DBS\MPCPath=\\SERVER\C-DCN\DCN\LocalDBDPath=C:\DCN\DBS\

[Server]SerialLink=Yes

[Serial Link]ComPort=1Baudrate=115200FullProtocol=Yes

[PC Config]MultiPC=YesDCNPCID=1

[LAN Info]AdapterNumber=0

Direct connection RS 232




DCNMPC.ini file in the DCN directory onthe Server-PC[MPC Config]UsedPCIDs=1,2STG_M=1STG_S=*SIG_M=1SMG_M=1SMG_S=*MMG_M=1MMG_S=*ING_M=1ING_S=*DBG_M=1PVG_M=1PVG_S=*MVG_M=1MVG_S=*LDG_M=1LDG_S=*MDG_M=*

[LAN Info]DCNGroupName=DCN

[Microphone Management]MicsOffAfterShift=No

ATG_M=1ATG_S=*VDG_M=*ICG_M=1CCG_M=1

[Lock Manager]LMPCID=1LMName=LockManLMTimeOut=25

[DATA Servers]CCUSPCID=1STDSPCID=1MMDSPCID=1INDSPCID=1SCDSPCID=1DELDSPCID=1VTDSPCID=1




Installing and Operating with Multi PC Control

End of section

Robert Bosch GmbH

All rights are reserved. Reproduction or passing on to

third parties in whole or in parts is prohibited without the

written consent of the copyright owner.

Security Systems BU Communication SystemsDCN ST/SEU-CO 1 DCN MPCC IO ASM ServerPC 09.12.2004...

Documents

Transcript of Security Systems BU Communication SystemsDCN ST/SEU-CO 1 DCN MPCC IO ASM ServerPC 09.12.2004...